Non‐breeding Cackling,Ross's and Snow Geese on Baffin Island show no loss of body mass during wing moult

Non‐breeding Cackling Branta hutchinsii, Ross's Anser rossii and Lesser Snow Geese Anser caerulescens caerulescens captured during remigial moult on Baffin Island in 2015 showed no loss of body mass with moult stage, and individual variation in mass was largely explained by sex and measures of body size (tarsus length). Exceptional conditions in 2015 resulted in almost no reproductive effort or success in that year, so captured geese of all three species were likely to have been non‐breeding individuals that initiated moult early, whereas there were almost no failed or successful breeders, which would normally moult later. This suggests that in a non‐breeding year (i.e. in the absence of competition from large numbers of goslings), locally moulting geese can obtain sufficient exogenous energy to meet their needs during the flightless wing moult period without losing body mass. This also is consistent with the hypothesis that in other species of geese, accumulation of fat stores prior to, and depletion of such stores during, wing moult is adaptive and likely to be a feature of individual plasticity to meet particular needs, such as undertaking moult migration to remote sites where precise foraging and predation conditions cannot be anticipated, or where competition from more dominant individuals may restrict their access to a reliable food supply.     

Species‐specific habitat use of wing‐moulting waterbirds in response to temporary flightlessness

The choice of the moulting habitat is of paramount importance for wing‐moulting waterbirds that have to cope with a flightless period of several weeks. However, some species might have more restricted habitat requirements during moult than others, for example due to a highly specialized feeding ecology. The moult‐related habitat use of five species (Gadwall Anas strepera, Red‐crested Pochard Netta rufina, Common Pochard Aythya ferina, Tufted Duck Aythya fuligula, Coot Fulica atra) was compared at a European inland moulting site that offered a variety of water bodies characterized by different levels of nutrient concentration, water depth, shoreline vegetation density and disturbance. To determine location‐ and species‐specific densities, birds were regularly counted throughout the moulting seasons of 2010 and 2011. In 2011, additional data on Gadwalls were used to assess differences in requirements between the flightless phase of moult and the periods before and after. Furthermore, habitat choice of 38 tagged Gadwalls was compared among two to four successive years. During the moulting season, all species showed clear preferences for specific levels of nutrient content, suggesting an active choice of suitable food sources in both food specialists and generalists. Species showing the strongest attachment to shallow water (Gadwall and Coot) were most sensitive to human disturbance and increasing water depths, and species averse to diving (Gadwall) used ponds with dense shore vegetation while flightless. For Gadwalls, habitat conditions rather than nutrient supply became increasingly important during the flightless phase. Average return rates of 59 and 54% were recorded for male and female Gadwalls, respectively, and the repeated use of familiar locations could be demonstrated in the majority of returning birds (65%). Familiarity with the habitat apparently plays an important role and may enable individuals to compensate for suboptimal conditions at the moulting site.     

Wing moult and mass change in free‐living mallard Anas platyrhynchos

Captured free‐living male mallard Anas platyrhynchos at Abberton in southern Britain showed peak mass gain immediately prior to simultaneous remex moult. Individuals of both sexes were heavier before shedding wing feathers than when flightless confirming literature accounts that show mallard accumulate fat stores in anticipation of moult to contribute to meeting energy needs during remex re‐growth. Over the course of four seasons, males lost 13 17% of initial body mass on average during re‐growth of flight feathers, females 13 23%. Based on energy expenditure of 1.3 times BMR, male mallard were estimated to be able to fulfil 42 60% and females 41 82% of their energy needs throughout moult from stores. Free‐flying male mallard fed ad libitum in a predator‐free environment did not differ in starting body mass or rate of mass loss during wing moult compared to free‐living Abberton birds, suggesting depletion of fat stores, irrespective of available sources of exogenous energy. Based on this evidence, we reject that the hypotheses that mass loss in moulting mallard is due to 1) simple energy stress and 2) restrictions on feeding and consider that 3) attaining the ability to fly at an earlier stage on incompletely grown flight feathers is not the primary factor shaping this trait. Rather, we consider the accumulation and subsequent depletion of fat stores, together with reductions in energy expenditure, enable mallard to re‐grow feathers as rapidly as possible by exploiting habitats that offer safety from predators, but do not necessarily enable them to balance energy budgets during the flightless period of remex feather re‐growth.     

Age‐specific variation in relationship between moult and pre‐migratory fuelling in Wood Sandpipers Tringa glareola in southern Africa

Trans‐equatorial avian migrants tend to breed, moult and migrate – the main energy‐requiring events in their lifecycle – at different times. Little is known about the relationship between wing moult and pre‐migratory fuelling in waders on their non‐breeding grounds, where time is less constrained than during their brief high‐latitude breeding season. We determined age‐related strategies of Wood Sandpipers Tringa glareola to balance the energetic demands of primary moult against pre‐migratory fuelling in southern Africa by analysing body mass and primary moult at first capture of 1721 birds mist‐netted in 1972–96 at waterbodies in Zimbabwe. Adults moulted all their primaries in August–December, but immatures underwent a supplemental moult of varying numbers of outer primaries in December–April, close to departure. We used locally weighted linear regression to estimate trends in Wood Sandpiper body mass from 1 July to 1 May. They maintained low mass from arrival in July–September to February–early March. Adults fuelled from 10 February to 1 May at a mean rate of 0.25 g/day (sd = 0.16). Most adults (98%) began fuelling 10–75 days after completing primary moult. Immatures fuelled from 4 March to 13 April at 0.24 g/day (sd = 0.14). They used varying strategies depending on their condition: a brief gap between moult and fuelling; an overlap of these processes near departure, leading to slower fuelling; or skipping fuelling altogether and staying in southern Africa for a ‘gap year’. Immatures moulting three or five outer primaries fuelled more slowly than post‐moult birds. Immatures moulting four outer primaries started fuelling 3 weeks later but at a higher rate than did post‐moult birds of this group. In post‐moult immatures, the later they ended moult, the later and faster they fuelled. The heaviest adults and immatures using all moult patterns accumulated fuel loads of c. 50% of lean body mass, and could potentially cross 2397–4490 km to reach the Great Rift Valley in one non‐stop flight. Immatures were more flexible in the timing and extent of moult and in the timing and rate of fuelling than adults. This flexibility enables inexperienced Wood Sandpipers to cope with inter‐annual differences in feeding conditions at Africa's ephemeral inland waterbodies.     

Ecology of migrant Black-necked Grebes Podiceps nigricollis at Mono Lake, California

Autumnal migrant Black-necked or Eared Grebes Podiceps nigricollis begin arriving in large numbers at Mono Lake, California, in August. Juveniles appear to arrive later than adults, and the number of grebes at Mono Lake peaks in September and October. The grebes leave by November or December. Stomachs of 73 grebes collected in the Autumns of 1980 and 1981 reveal that brine shrimp Artemia monica comprise over 90% of the diet. The remainder of the diet is composed of the larvae, pupariaand adults of a brine fly Ephydra hians and small numbers of shore bugs Saldula arenicola and 5. opiparia and other terrestrial arthropods. The grebes do not feed at night but rest instead in large nocturnal aggregations over deep water. Grebe fat stores and total body-weight increase from August to October, and adults moult their regimes in August and September. In late autumn brine shrimp densities decline dramatically and the grebes leave the lake.     

Pre‐moult patterns of habitat use and moult site selection by Brent Geese Branta bernicla nigricans: individuals prospect for moult sites

In environments where habitat quality varies, the mechanism by which individuals assess and select habitats has significant consequences on their spatial distribution and ability to respond to environmental change. Each year, thousands of Black Brent Geese Branta bernicla nigricans migrate to the Teshekpuk Lake Special Area (TLSA), Alaska, to undergo a flightless wing‐moult. Over the last three decades, moulting Brent Geese have changed their distribution within the TLSA, redistributing from inland, freshwater wetlands towards coastal, brackish wetlands. To understand better the mechanism by which Brent Geese select a moult site, as well as reasons behind the long‐term shift of moulting distributions, we examined movements and habitat use of birds marked with GPS‐transmitters during the pre‐moult period. Brent Geese did not generally migrate directly to their moulting site during the pre‐moult period, defined as the time from arrival at the moulting grounds to the onset of flightlessness. Rather, individuals used an average of 3.7 ± 0.6 (se) wetland complexes and travelled a minimum of 95.14 ± 15.84 km during the pre‐moult period. Moreover, 69% of Brent Geese visited their final moult site only to leave and visit other sites before returning for the flightless moult. Brent Geese spent significant time in both inland freshwater and coastal estuarine habitats during the pre‐moult, irrespective of the habitat in which they ultimately moulted. Whereas previous research suggested that Brent Geese choose moult sites based largely upon the experience of previous years, our observations suggest a mechanism of moult site selection whereby Brent Geese ‘prospect’ for moult sites, visiting multiple potential moult sites across varied habitat types, presumably gathering information from each site and correspondingly using this information to choose an appropriate moult site. By allowing individuals to adjust their distributions in response to habitat quality cues that may change annually, such as forage type and availability, prospecting may have influenced the long‐term shift in moulting distributions of Brent Geese in the TLSA.     

Changes in body mass and organ size during remigial moult in common scoter Melanitta nigra

The “cost‐benefit” hypothesis states that avian body organs show mass changes consistent with the trade‐off between their functional importance and maintenance cost, which may vary throughout the annual cycle. Flightless moulting common scoter Melanitta nigra in Danish marine waters select rich undisturbed offshore feeding areas lacking predators, suggesting active feeding during moult. We tested four predictions relating to organ size during flightlessness in moulting male common scoter under this hypothesis. Namely that (i) pectoral muscles would show atrophy followed by hypertrophy, but that there would be no change in (ii) leg muscles and heart (the locomotory architecture required to sustain diving for food), (iii) digestive organs and liver (required to process food), or (iv) fat deposits (because birds could fulfil daily energy requirements from locally abundant food resources). Dissection of scoters collected at different stages during wing moult south of the Danish island of Læsø provided data on organ size that were consistent with these predictions. Pectoral muscle mass showed a c.23% atrophy during the middle of the flightless period relative to that at the end of moult. There was no significant loss in leg muscle, heart, digestive organs (except gizzard mass), liver, fat reserves or body mass with remigial growth. These findings are consistent with the hypothesis that common scoter moult in a rich feeding area, and rely on their diet to meet the nutritional requirements of remigial moult. These results differ in detail from those of a similar study of terrestrial feeding moulting greylag geese Anser anser, but because of the widely differing ecology of the species concerned, both sets of findings provide strong support for the hypothesis that variations in phenotypic plasticity in size of fat stores, locomotor and digestive organs can be interpreted as evolutionary adaptations to meet the conflicting needs (feather growth, nutritional challenges and predator avoidance) of the flightless moult period in different Anatidae species.     

Chronic coccidian infestation compromises flight feather quality in house sparrows Passer domesticus

Parasites usurp indispensable resources for birds during a moult, and this is particularly relevant for those parasites residing in host intestines. This might compromise the nutritionally demanding moult and, thus, feather functionality. Although lower feather quality has profound and multifaceted adverse effects on residual fitness, surprisingly, little is known about parasites' effect on feather traits, especially over the longer term. We conducted an aviary experiment by medicating half of a group of naturally infested house sparrows Passer domesticus against intestinal coccidians for 15 months, spanning two consecutive postnuptial moults, whereas the other half was kept infested (i.e. without medication). Coccidian infestation significantly and negatively affected the size of the uropygial gland during the second moulting period compared to the medicated group. Furthermore, wing length was significantly shorter after the second moulting in the non‐medicated compared to the medicated female birds, which indicates that the negative effects of coccidians emerge only after a prolonged exposure to parasite infestation. Non‐medicated birds grew poorer quality flight feathers detected in a large number of feather traits both after the first and second moults. In the case of non‐medicated birds, the primaries were lighter and shorter, and had a smaller vane area, thinner rachis and decreased stiffness, although a higher barb and barbule density, which may have various consequences for fitness through reducing flight performance. Our findings demonstrate that, besides the well‐known immediate consequences for host breeding success, parasites might also have serious, long‐lasting effects through influencing feather quality and, ultimately, fitness of the host. © 2013 The Linnean Society of London     

Conditions at the breeding grounds and migration strategy shape different moult patterns of two populations of Eurasian golden plover Pluvialis apricaria

Events in the life cycle of migrant birds are generally time‐constrained. Moult, together with breeding and migration, is the most energetically demanding annual cycle stages, but it is the only stage that can be scheduled at different times of the year. However, it is still not fully understood what factors determine this scheduling. We compare the timing of primary feather moult in relation to breeding and migration between two populations of Eurasian golden plover Pluvialis apricaria, the continental population breeding in Scandinavia and in N Russia that migrates to the Netherlands and southern Europe, and the Icelandic population that migrates mainly to Ireland and western UK. Moult was studied at the breeding grounds (N Sweden, N Russia, Iceland) and at stopover and wintering sites (S Sweden, the Netherlands). In both populations, primary moult overlapped with incubation and chick rearing, and females started on average 9 d later than males. Icelandic plovers overlapped moult with incubation to a larger extent and stayed in the breeding grounds until primary moult was completed. In contrast, continental birds only moulted the first 5–7 primaries at the breeding grounds and completed moult in stopover and wintering areas, such as S Sweden and the Netherlands. This overlap, although rare in birds, can be understood from an annual cycle perspective. Icelandic plovers presumably need to initiate moult early in the season to be able to complete it at the breeding grounds. The latter is not possible for continental plovers as their breeding season is much shorter due to a harsher climate. Additionally, for this population, moulting all the primaries at the stopover/wintering site is also not possible as too little time would remain to prepare for cold‐spell movements. We conclude that environmental conditions and migration strategy affect the annual scheduling of primary feather moult in the Eurasian golden plover.     

Relationships among timing of moult,moult duration and feather mass in long‐distance migratory passerines

Moult is a costly but necessary process in avian life, which displays two main temporal patterns within the annual cycle of birds (summer and winter moult). Timing of moult can affect its duration and consequently the amount of material invested in feathers, which could have a considerable influence on feather structure and functionality. In this study, we used two complementary approaches to test whether moult duration and feather mass vary in relation to the timing of moult. Firstly, we conducted a comparative study between a sample of long‐distance migratory passerine species which differ in moult pattern. Secondly, we took advantage of the willow warbler's Phylloscopus trochilus biannual moult, for which it is well‐known that winter moult takes longer than summer moult, to assess between‐moult variation in feather mass. Our comparative analysis showed that summer moulting species performed significantly shorter moults than winter moulters. We also detected that feathers produced in winter were comparatively heavier than those produced in summer, both in between‐species comparison and between moults of the willow warbler. These results suggest the existence of a trade‐off between moult speed and feather mass mediated by timing of moult, which could contribute to explain the diversity of moult patterns in passerines.     

Moult topography and its application to the study of partial wing‐moult in two neotropical wrens

During partial moults birds replace a variable number or percentage of old feathers. This quantity, known as moult extent, has been a primary variable used in comparative studies. However, different spatial configurations of feather replacement may result from an equal number of renewed feathers. Few studies have addressed spatial aspects of moult, which may vary among species, among individuals of the same species and between episodes at the individual level. We present a novel approach to quantify the spatial configuration of a wing‐moult episode, hereafter referred to as moult topography, which comprises two elements, namely extent and vector, the latter condensing the spatial configuration of the replaced feathers on the wing plane. We apply this method to investigate preformative (post‐juvenile) wing‐feather moult pattern in the Spot‐breasted Wren Pheugopedius maculipectus and the White‐breasted Wood‐Wren Henicorhina leucosticta. We specified a null model of wing‐moult topography by which feather replacement follows a discrete anterior–posterior (vertical) axis between tracts and a discrete proximal–distal (horizontal) axis within tracts, and whereby wing feathers from a new tract are replaced only if all the feathers from the previous (anterior) tract have been replaced. Our sample of Spot‐breasted Wrens showed a strict single pattern of replacement that did not differ significantly from the null model. Our sample of White‐breasted Wood‐Wrens, however, differed significantly from the null model, showing prioritization of proximal wing feathers closer to the body. These differences might have biological relevance, for example in mate selection or in response to different environmental stressors, and might reveal the influence of these factors on the evolution of moult strategies. Overall, moult topography provides a new approach to future ecological and evolutionary studies of moult.     

Migratory behaviour affects the trade-off between feather growth rate and feather quality in a passerine bird

Migratory birds have less time for moulting than sedentary birds, which may force them to produce their feathers faster at the expense of reducing feather quality. However, the effects of migration on the trade-off between moult speed and plumage quality remain to be studied in natural populations. We analysed the relationship between growth rate and quality of individual feathers, taking advantage of natural variation between migratory and sedentary populations of blackcaps Sylvia atricapilla . As predicted by life-history theory, individual blackcaps showed variable individual quality, which was revealed by positive correlations between feather growth rate and feather mass within populations. However, migrants grew up their feathers faster, producing lighter feathers than sedentary blackcaps. These results support the idea that feather growth rate and feather quality are traded against each other in blackcaps. Such a trade-off is apparently caused by different selection associated to migratory and sedentary life styles, which opens new insights into the diversification of moult patterns in birds.  © 2009 The Linnean Society of London, Biological Journal of the Linnean Society , 2009, 97 , 98–105.     

Marine moult migration of the freshwater Scaly‐sided Merganser Mergus squamatus revealed by stable isotopes and geolocators

Scaly‐sided Mergansers Mergus squamatus breed on freshwater rivers in far eastern Russia, Korea and China, wintering in similar habitats in China and Korea, but nothing was known of their moulting habitat. To investigate the moult strategies of this species, we combined wing feather stable isotope ratios (males and females) with geolocator data (nesting females) to establish major habitat types (freshwater, brackish or saltwater) used by both sexes during wing moult. Although most Scaly‐sided Mergansers of both sexes probably moult on freshwater, some males and non‐breeding and failed breeding females appeared to undertake moult migration to brackish and marine waters. Given the previous lack of any surveys of coastal or estuarine waters for this species during the moult period, these findings suggest important survey needs for the effective conservation of the species during the flightless moult period.     

Monteiro's Storm‐petrel Oceanodroma monteiroi: a new species from the Azores

The existence of two seasonally distinct breeding populations of Oceanodroma storm‐petrels in the Azores islands was first documented in 1996. The discovery of morphological differences between the populations led to the suggestion that they may represent cryptic sibling species. Recent mtDNA and microsatellite analysis from storm‐petrel populations has considerably advanced our understanding of their taxonomic relationships. Here we present new information on the timing of breeding and moult of the two Azores populations, the extent of exchange of individuals between seasons, and diet from feather isotopes. We conclude that the hot‐season Azores population should be considered a new species for which we propose the name Oceanodroma monteiroi, Monteiro's Storm‐petrel. The species is both genetically distinct and genetically isolated from the sympatric cool‐season population of Madeiran Storm‐petrel Oceanodroma castro, and from all other populations of Oceanodroma castro in the Atlantic and Pacific Oceans examined to date. Differences in the vocalizations permit species recognition, and the extent of primary feather wear and stage of moult aids separation of the two species in the Azores, which is especially valuable during August when both attend the breeding colonies in large numbers. Feather carbon and nitrogen isotopes reveal that the diet of Monteiro's Storm‐petrel differs from that of the sympatric Madeiran Storm‐petrel during both breeding and non‐breeding seasons, and unlike the Madeiran Storm‐petrel, Monteiro's Storm‐petrel appears to maintain the same foraging environment during the summer and winter months, though it shows a dietary shift to higher trophic levels during the non‐breeding season. Monteiro's Storm‐petrel is thought to be confined to the Azores archipelago, where it is currently known to nest on just two small neighbouring islets. The total population size was estimated at 250–300 pairs in 1999.     

Contrasting strategies for wing‐moult and pre‐migratory fuelling in western and eastern populations of Common Whitethroat Sylvia communis

Trade‐offs between moult and fuelling in migrant birds vary with migration distance and the environmental conditions they encounter. We compared wing moult and fuelling at the northern and southern ends of migration in two populations of adult Common Whitethroats Sylvia communis. The western population moults most remiges at the breeding grounds in Europe (e.g. Poland) and migrates 4000–5000 km to western Africa (e.g. Nigeria). The eastern population moults all remiges at the non‐breeding grounds and migrates 7000–10 000 km from western Asia (e.g. southwestern Siberia) to eastern and southern Africa. We tested the hypotheses that: (1) Whitethroats moult their wing feathers slowly in South Africa, where they face fewer time constraints than in Poland, and (2) fuelling is slower when it coincides with moulting (Poland, South Africa) than when it occurs alone (Siberia, Nigeria). We estimated moult timing of primaries, secondaries and tertials from moult records of Polish and South African Whitethroats ringed in 1987–2017 and determined fuelling patterns from the body mass of Whitethroats ringed in all four regions. The western population moulted wing feathers in Poland over 55 days (2 July–26 August) at a varying rate, up to 13 feathers simultaneously, but fuelled slowly until departure in August–mid‐September. In Nigeria, during the drier period of mid‐February–March they fuelled slowly, but the fuelling rate increased three‐fold in April–May after the rains before mid‐April–May departure. The eastern population did not moult in Siberia but fuelled three times faster before mid‐July–early August departure than did the western birds moulting in Poland. In South Africa, the Whitethroats moulted over 57 days (2 January–28 February) at a constant rate of up to nine feathers simultaneously and fuelled slowly from mid‐December until mid‐April–May departure. These results suggest the two populations use contrasting strategies to capitalize on food supplies before departure from breeding and non‐breeding grounds.     

Experimental test of a trade‐off between moult and immune response in house sparrows Passer domesticus

A trade‐off between immune system and moulting is predicted in birds, given that both functions compete for resources. However, it is unclear whether such a trade‐off exists during post‐breeding moult. This study tests such a trade‐off in the house sparrow (Passer domesticus). Males injected with an antigen (lipopolysaccharide) significantly moulted slower than sham‐injected males. Moreover, males whose seventh primaries were plucked to simulate moult showed smaller immune response to phytohaemagglutinin than control males, in which seventh primaries were clipped. A trade‐off between moult speed and body mass was also found. The results show a clear trade‐off between moult and immune response in the house sparrow: immune response negatively affected moult and moult negatively affected immune response. These findings suggest that only individuals in good condition may have an efficient moult and simultaneously respond effectively in terms of immunity to pathogens, which could explain how plumage traits honestly indicate parasite resistance in birds.     

Large‐scale longitudinal climate gradient across the Palearctic region affects passerine feather moult extent

Large‐scale spatial gradients of environmental conditions shape organisms, populations and ecosystems. Even though environmental gradients are a key research theme in macro‐ecology and biogeography, the effects of large‐scale, east–west, environmental gradients are largely overlooked compared with north–south gradients. Our study focused on feather moult, an important and energy demanding process in birds. By comparing Western and Eastern Palearctic populations of 21 species, we found that juvenile passerines in the Western and Eastern Palearctic differ in the number of feathers moulted as part of their post‐juvenile moult. This difference is most likely the result of a large‐scale climatic gradient in cold season duration and consequent differences in the time available for moulting. Eastern populations were characterized by a limited extent of feather moult that was additionally affected by migration distance and body mass. The longer migration distance in the Eastern Palearctic caused a generally less extensive moult while high body mass was correlated with a low difference in moult extent between the Western and Eastern Palearctic regions. These results highlight the importance of linking annual cycle processes at the organismal level to the specific environmental conditions within the distribution range of each species.     

The effects of long‐distance migration on the evolution of moult strategies in Western‐Palearctic passerines

Although feathers are the unifying characteristic of all birds, our understanding of the causes, mechanisms, patterns and consequences of the feather moult process lags behind that of other major avian life‐history phenomena such as reproduction and long‐distance migration. Migration, which evolved in many species of the temperate and arctic zones, requires high energy expenditure to endure long‐distance journeys. About a third of Western‐Palearctic passerines perform long‐distance migrations of thousands of kilometres each year using various morphological, physiological, biomechanical, behavioural and life‐history adaptations. The need to include the largely non‐overlapping breeding, long‐distance migration and feather moult processes within the annual cycle imposes a substantial constraint on the time over which the moult process can take place. Here, we review four feather‐moult‐related adaptations which, likely due to time constraints, evolved among long‐distance Western‐Palearctic migrants: (i) increased moult speed; (ii) increased overlap between moult and breeding or migration; (iii) decreased extent of plumage moult; and (iv) moult of part or all of the plumage during the over‐wintering period in the tropics rather than in the breeding areas. We suggest that long‐distance migration shaped the evolution of moult strategies and increased the diversity of these strategies among migratory passerines. In contrast to this variation, all resident passerines in the Western Palearctic moult immediately after breeding by renewing the entire plumage of adults and in some species also juveniles, while in other species juvenile moult is partial. We identify important gaps in our current understanding of the moult process that should be addressed in the future. Notably, previous studies suggested that the ancestral moult strategy is a post‐breeding summer moult in the Western Palearctic breeding areas and that moult during the winter evolved due to the scheduling of long‐distance migration immediately after breeding. We offer an alternative hypothesis based on the notion of southern ancestry, proposing that the ancestral moult strategy was a complete moult during the ‘northern winter’ in the Afro‐tropical region in these species, for both adults and juveniles. An important aspect of the observed variation in moult strategies relates to their control mechanisms and we suggest that there is insufficient knowledge regarding the physiological mechanisms that are involved, and whether they are genetically fixed or shaped by environmental factors. Finally, research effort is needed on how global climate changes may influence avian annual routines by altering the scheduling of major processes such as long‐distance migration and feather moult.     

Variation in body mass dynamics among sites in Black Brant Branta bernicla nigricans supports adaptivity of mass loss during moult

Birds employ varying strategies to accommodate the energetic demands of moult, one important example being changes in body mass. To understand better their physiological and ecological significance, we tested three hypotheses concerning body mass dynamics during moult. We studied Black Brant in 2006 and 2007 moulting at three sites in Alaska which varied in food availability, breeding status and whether geese undertook a moult migration. First we predicted that if mass loss during moult were simply the result of inadequate food resources then mass loss would be highest where food was least available. Secondly, we predicted that if mass loss during moult were adaptive, allowing birds to reduce activity during moult, then birds would gain mass prior to moult where feeding conditions allowed and mass loss would be positively related to mass at moult initiation. Thirdly, we predicted that if mass loss during moult were adaptive, allowing birds to regain flight sooner, then across sites and groups, mass at the end of the flightless period would converge on a theoretical optimum, i.e. the mass that permits the earliest possible return to flight. Mass loss was greatest where food was most available and thus our results did not support the prediction that mass loss resulted from inadequate food availability. Mass at moult initiation was positively related to both food availability and mass loss. In addition, among sites and years, variation in mass was high at moult initiation but greatly reduced at the end of the flightless period, appearing to converge. Thus, our results supported multiple predictions that mass loss during moult was adaptive and that the optimal moulting strategy was to gain mass prior to the flightless period, then through behavioural modifications use these body reserves to reduce activity and in so doing also reduce wing loading. Geese that undertook a moult migration initiated moult at the highest mass, indicating that they were more than able to compensate for the energetic cost of the migration. Because Brant frequently change moult sites between years in relation to breeding success, the site‐specific variation in body mass dynamics we observed suggests individual plasticity in moult body mass dynamics.     

Non‐moulted primary coverts correlate with rapid primary moulting

Time constraint is a main factor which affects the moult strategies in passerines, mainly during the first year of life. The variability of moult strategies between species is associated with the extent of the moult. In the first year of life, the extent of the moult is highly variable between species and individuals. In most passerine species, juveniles only renew some of their feathers, but the factors that govern which feathers are renewed and which are retained have been largely overlooked. Here we examine the common pattern of non‐moulted primary coverts (PC) in passerines during the first‐year moult cycle (post‐juvenile and first‐year pre‐breeding moults). On the interspecific level we found that among 63 species of passerines, PCs are the least commonly moulted feather tract. For five species (Hirundo rustica, Pycnonotus xanthopygos, Prinia gracilis, Acrocephalus stentoreus and Passer moabiticus) which perform a complete post‐juvenile moult, we found that the PC moult occurs over a longer period than greater coverts (GCs) and is sequential (non‐simultaneous). At the intraspecific level, we found that the main difference between a partial and complete moult in Prinia gracilis is the moulting or non‐moulting of the PCs. We also demonstrate that for Prinia gracilis 1) juveniles which do not moult their PCs, moult their primaries at a higher speed than those which moult their PCs and 2) area/mass ratio of PCs is lower than of GCs. These two findings may explain why many passerines skip PC renewal during the first year of life. Because the PC moult lasts a long time, forgoing this moult enables long term resource savings that allow for dealing with time constraints. Our results highlight the adaptive advantages of non‐moulted PCs in cases of time constraints.