Production of mannitol by a novel strain of Candida magnoliae

A novel microorganism was isolated which is able to produce mannitol when grown in the presence of fructose and glucose as carbon sources. In flask culture in a medium containing 150 g fructose l^–1, it yielded 67 g mannitol l^–1 after 168 h. In fed-batch culture with 3–12% (w/v) fructose, production reached a maximum of 209 g mannitol l^–1 after 200 h, corresponding to an 83% yield and a 1.03 g l^–1 h^–1 productivity. The isolated strain was identified as Candida magnoliae based on identical sequences in the D1/D2 domain of its 26S rDNA and a similar carbon source utilization pattern with C. magnoliae reference strains.     

Utilization of vegetable oil in the production of clavulanic acid by <Emphasis Type="Italic">Streptomyces clavuligerus</Emphasis>ATCC 27064

Production of clavulanic acid (CA) by Streptomyces clavuligerus ATCC 27064 in shake-flask culture (28 °C, 250 rev min^–1) was evaluated, with media containing different types and concentrations of edible vegetable oil. Firstly, four media based on those reported in the literature were examined. The medium containing soybean oil and starch as carbon and energy source gave the best production results. This medium, with the starch replaced by glycerol, and with various soybean oil concentrations (16, 23 and 30 g l^–1) was utilized to further investigate CA production. Medium containing 23 g l^–1 led to the highest CA productivity (722 mg l^–1 in 120 h) and that one containing 30 g l^–1 gave the highest CA titre (753 mg l^–1 in 130 h). Also, substitution of corn and sunflower edible oils furnished similarly good results in terms of CA titre and productivity. It can be concluded that easily available vegetable oil is a very promising substrate for CA production, since it is converted slowly to glycerol and fatty acids, which are the main carbon and energy source for the microorganism.     

Production of a fusion protein of sweet potato sporamin from recombinant E. coli XL1 Blue by fed-batch fermentations

Glucose-stat and pH-stat control strategies were employed in order to culture a recombinant E. coli XL1 Blue to produce a fusion protein of sweet potato sporamin (SPA) and glutathione S-transferase (GST) from the recombinant E. coli XL1 Blue. Cell densities up to 25 g l^–1 and 28.9 mg fusion protein (GST-SPA) g^–1 cell dry weight (CDW) was achieved from a fed-batch fermentation controlled by glucose-stat strategy. A pH-stat control fermentation using glycerol as a carbon source gave E. coli up to 27 g l^–1 and 31.5 mg GST-SPA g^–1 CDW. Additionally, a pH-stat control strategy using glucose as a carbon source gave E. coli up to 15 g l^–1 and about 22.7 mg g^–1 CDW of GST-SPA.     

Production of medium chain length polyhydroxyalkanoates by fed-batch culture of Pseudomonas oleovorans

Pseudomonas oleovorans was cultivated to produce medium chain length polyhydroxyalkanoates (MCL-PHAs) from octanoic acid and ammonium nitrate as carbon and nitrogen source, respectively, by a pH-stat fed-batch culture technique. The octanoate in the culture broth was maintained below 4 g l^–1 by feeding the mixture of octanoic acid and ammonium nitrate when the culture pH rose above 7.1. The final cell concentrations of 63, 55 and 9.5 g l^–1, PHA contents of 62, 75 and 67% of dry cell wt, and productivities of 1, 0.63 and 0.16 g l^–1 h^–1 were obtained when the C/N ratios in the feed were 10, 20 and 100 g octanoic acid g^–1 ammonium nitrate, respectively.     

Effects of activated charcoal, explant size, explant position and sucrose concentration on plant and shoot regeneration of Lilium longiflorum via young stem culture

An efficient system for the in vitro plant and shootregeneration of Lilium longiflorum was developed andaccomplished using transverse thin cell layers (tTCL) of young stems.tTCLs were cut transversely along young stems from which the shoot-tipshad been removed. Sections were measured accurately using a graded gridand were cut in 4 mm × 4 mm × 1 mm cubes, eliminatingepidermal tissue, and were cultured on one-half MS medium containing 8 gl^–1 agar, different sucrose concentrations (10, 20, 30 or 40g l^–1), and with or without 1 mg l^–1 activatedcharcoal (AC). Plants formed on the surface of tTCLs within 60 days onone-half MS medium containing 8 g l^–1 agar and 20 gl^–1 sucrose. Sections of 1 mm taken just below the apicalarea developed buds within 15 days, whereas the sections closer to thebase required about 45 days. Shoot regeneration was enhanced whensucrose concentration was used at 30 or 40 g l^–1 after 60days of culture. No root formation occurred. Both shooting and rootingoccurred when sucrose was used at 20 g l^–1. The plantletswere transferred to soil and grew well under greenhouseconditions.     

Poly-3-hydroxybutyrate (P3HB) production by bacteria from xylose,glucose and sugarcane bagasse hydrolysate

Fifty-five bacterial strains isolated from soil were screened for efficient poly-3-hydroxybutyrate (P3HB) biosynthesis from xylose. Three strains were also evaluated for the utilization of bagasse hydrolysate after different detoxification steps. The results showed that activated charcoal treatment is pivotal to the production of a hydrolysate easy to assimilate. Burkholderia cepacia IPT 048 and B. sacchari IPT 101 were selected for bioreactor studies, in which higher polymer contents and yields from the carbon source were observed with bagasse hydrolysate, compared with the use of analytical grade carbon sources. Polymer contents and yields, respectively, reached 62% and 0.39 g g^–1 with strain IPT 101 and 53% and 0.29 g g^–1 with strain IPT 048. A higher polymer content and yield from the carbon source was observed under P limitation, compared with N limitation, for strain IPT 101. IPT 048 showed similar performances in the presence of either growth-limiting nutrient. In high-cell-density cultures using xylose plus glucose under P limitation, both strains reached about 60 g l^–1 dry biomass, containing 60% P3HB. Polymer productivity and yield from this carbon source reached 0.47 g l^–1 h^–1 and 0.22 g g^–1, respectively.     

Establishment of Orthosiphon stamineus Cell Suspension Culture for Cell Growth

Callus of Orthosiphon stamineus could be induced successfully from petiole, leaf and stem tissues but not roots when cultured on MS medium containing different concentration of NAA (0–4.0 mg l^–1) and 2,4-D (0–2.0 mg l^–1). Highest fresh weight callus production was obtained from leaf explants and those with best friability were obtained on MS medium plus 1.0 mg l^–1 2,4-D plus 1.0 mg l^–1 NAA. Cell suspension cultures were established from these cultures. The appropriate cell inoculum size for the best cell growth was 0.75 g of cells in 20 ml culture medium. Cell suspension culture using MS medium supplemented with 1.0 mg l^–1 2,4-D promoted the best cell growth with maximum biomass of 8.609 g fresh weight and 0.309 g dry weight 24 days after inoculation. Cells that grew in MS medium supplemented with 1.0 mg l^–1 2,4-D reached the stationary growth phase in 15 days as compared to the cells that grew in MS medium supplemented with 1.0 mg l^–1 2,4-D + 1.0 mg l^–1 NAA reached the stationary phase in 24 days. MS medium supplemented with 1.0 mg l^–1 2,4-D was considered as the maintenance medium for maintaining the optimum cell growth of O. stamineus in the cell suspension cultures with 2-week interval subculture.     

Biomass production in mixotrophic culture of Euglena gracilis under acidic condition and its growth energetics

When Euglena gracilis was grown in the heterotrophic condition with glucose and (NH₄)₂SO₄ as the carbon and nitrogen source, a high cell yield (4.28–4.48 g l^–1) was obtained and the culture pH decreased to 1.6–2. The biomass production in the heterotrophic culture was compared to those in the autotrophic and mixotrophic cultures. Autotrophic growth was 4.7–6.3% of the heterotrophic one, whereas about 15–19% higher growth was obtained in the mixotrophic culture. Moreover, good production of chlorophyll (39.4 mg l^–1) and carotenoids (13.8 mg l^–1) were attained in the mixotrophic culture, giving the highest fermenter productivity with respect to biomass as well as chlorophyll and carotenoids. Through an energetic analysis in the mixotrophic culture, it was estimated about 25–28% of the total ATP requirement is formed in the photochemical reactions. This resulted in an improved biomass production in the mixotrophic culture of E. gracilis.     

Micropropagation of zedoary (<Emphasis Type="Italic">Curcuma zedoaria</Emphasis> Roscoe) – a valuable medicinal plant

Tissue culture propagation system was developed for zedoary (Curcuma zedoaria Roscoe), a valuable medicinal plant, using rhizome sprout cultures. Shoots were induced from rhizomes on basal MS medium containing 20 g l^–1 sucrose and 5 g l^–1 agar, supplemented with 20 (v/v) coconut water (CW) and benzylaminopurine (BA) concentrations from 0.5 to 5.0 m g l^–1. The excised shoots were subcultured on Murashige-Skoog (MS) medium with 20 (v/v) CW and different concentrations of BA and kinetin (Kin), either alone or in combination with indolebutyric acid (IBA) or naphthaleneacetic acid (NAA). MS medium with 20 (v/v) CW, 3 mg l^–1 BA, and 0.5 mg l^–1 IBA resulted in a multiplication rate per shoot; 5.6 shoots per explant were obtained on average after 30 days of culture. Well-developed shoots (30–40 mm in length) were rooted on MS medium containing 20 g l^–1 sucrose and 8 g l^–1 agar, supplemented with 20 (v/v) CW and 2 mg l^–1 NAA. More than 95 of the rooted plants were established in pots after hardening.     

High efficiency degradation of tetrahydrofuran (THF) using a membrane bioreactor: identification of THF-degrading cultures of<Emphasis Type="Italic"> Pseudonocardia</Emphasis> sp. strain M1 and<Emphasis Type="Italic"> Rhodococcus ruber</Emphasis> isolate M2

A mixed microbial culture capable of growing aerobically on tetrahydrofuran (THF) as a sole carbon and energy source was used as the inoculum in a 10 l working volume membrane bioreactor. Following start-up, the reactor was operated in batch mode for 24 h and then switched to continuous feed with 100% biomass recycle. On average, greater than 96% of THF fed to the reactor was removed during the 8-month study. THF loading rates ranged from 0.62 to 9.07 g l^–1 day^–1 with a hydraulic retention time of 24 h. THF concentrations as high as 800 mg/l were tolerated by the culture. Biomass production averaged 0.28 kg total suspended solids/kg chemical oxygen demand removed, i.e., comparable to a conventional wastewater treatment process. Periodic batch wasting resulted in a solids retention time of 7–14 days. Reactor biomass typically ranged from 4 to 10 g/l volatile suspended solids and the effluent contained no solids. Pure THF-degrading cultures were isolated from the mixed culture based on morphological characteristics, Gram-staining and THF degradation. Based on 16S rDNA analysis the isolates were identified as Pseudonocardia sp. M1 and Rhodococcus ruber M2.     

Production of cellulases in batch culture using a mutant strain of Trichoderma reesei growing on soluble carbon source

Trichoderma reesei Rut-C30 is a highly derepressed mutant which synthesised active cellulases in culture media containing glucose and lactose as the only carbon sources. The maximum biomass, filter paper and specific filter paper activities for cell growth on 20 g glucose l^–1 were 20 g dry cell wt l^–1, 1.9 FPU ml^–1 and 4.8 FPU mg^–1 protein respectively, while on 40 g glucose l^–1 were 25 g dry cell wt l^–1, 4.5 FPU ml^–1 and 6.2 FPU mg^–1 protein, respectively. This strain had a higher specific filter paper activity (6.2 FPU mg^–1 protein) than was produced by other T. reesei mutants (3.6 FPU mg^–1 protein).     

Production of a thermostable extracellular lipase by Kluyveromyces marxianus

Kluyveromyces marxianus was grown in submerged culture in a complex medium with several potential inducers of lipolytic activity (triacylglycerols, fatty acids). The highest extracellular lipolytic enzyme production (about 80 U ml^–1 in 3 d) was obtained when the medium was supplemented with 2 g urea l^–1 plus 5 g tributyrin l^–1. Addition of surfactants (1 g l^–1) did not improve production. The lipase had a high thermal stability in aqueous solution (73% residual activity after 9 d at 50 °C, 16 min half-life time at 100 °C). It was also stable at acidic pH and showed good tolerance to organic solvents (70% residual activity after 2 d in n-hexane of cyclohexane).     

Poly(3-hydroxybutyrate) synthesis in fed-batch culture of Ralstonia eutropha with phosphate limitation under different glucose concentrations

Poly(3-hydroxybutyrate) (PHB) was produced by fed-batch cultures of Ralstonia eutropha with phosphate limitation under different glucose concentrations. When glucose was kept at 2.5 g l^–1, cell growth and PHB synthesis were limited due to the shortage of carbon source but a higher PHB content occurred in the cell-growth stage. This shows that a low glucose concentration is favorable for PHB accumulation in R. eutropha. PHB obtained with glucose at 9 g l^–1 is 1.6 times that obtained with 40 g l^–1. When glucose was in the range of 9 to 40 g l^–1, PHB concentration and productivity decreased significantly with the increase of glucose concentration. The highest PHB productivity was obtained with glucose at 9 g l^–1.     

A halotolerant and thermotolerant <Emphasis Type="Italic">Bacillus</Emphasis> sp. degrades hydrocarbons and produces tensio-active emulsifying agent

A Bacillus sp. strain DHT, isolated from oil-contaminated soil, grew and produced biosurfactant when cultured in variety of substrate at salinities of up to 100 g l⁻¹ and temperatures up to 45°C. It was capable of utilizing crude oil, fuels, various pure alkanes and PAHs as a sole carbon and energy source across a wide range of temperature and salinity. Over the range evaluated, the degradation of hydrocarbon and biosurfactant production was not influenced by salinity (0–10% wv⁻¹) and temperature (30–45°C). The biosurfactant produced by the organism emulsified a range of hydrocarbons with hexadecane as the best substrate and toluene as the poorest. From 16S rDNA analysis, strain DHT was related to Bacillus licheniformis.     

High-level production of arachidonic acid by fed-batch culture of <Emphasis Type="Italic"> Mortierella alpina</Emphasis> using NH<Subscript>4</Subscript>OH as a nitrogen source and pH control

Mortierella alpina was grown in a fed-batch culture using a 12-l jar fermenter with an initial 8-l working volume containing 20 g glucose l⁻¹ and 10 g corn-steep powder l⁻¹. Glucose was intermittently fed to give 32 g l⁻¹ at each time. The pH of culture was maintained using 14% (v/v) NH₄OH, which also acted as a nitrogen source. A final cell density of 72.5 g l⁻¹ was reached after 12.5 days with a content of arachidonic acid (ARA) at 18.8 g l⁻¹. These values were 4 and 1.8 times higher than the respective values in batch culture. Our results suggest that the combined feeding of glucose and NH₄⁺ to the growth of M. alpina could be applied for the industrial scale production of ARA.     

Selective production of bikaverin in a fluidized bioreactor with immobilized Gibberella fujikuroi

The best culture medium composition for the production of bikaverin by Gibberella fujikuroi in shake-flasks, i.e. 100 g glucose l^–1; 1 g NH₄Cl l^–1; 2 g rice flour l^–1; 5 g KH₂PO₄ l^–1 and 2.5 g MgSO₄ l^–1, was obtained through a fractional factorial design and then scaled-up to a fluidized bioreactor. The effects of carbon and nitrogen concentrations, inoculum size, aeration, flow rate and bead sizes on batch bikaverin production using immobilized G. fujikuroi in a fluidized bioreactor were determined by an orthogonal experimental design. Concentrations of up to 6.83 g bikaverin l^–1 were obtained when the medium contained 100 g glucose l^–1 and 1 g NH₄Cl l^–1 with an inoculum ratio of 10% v/v, an aeration rate of 3 volumes of air per volume of medium min^–1, and a bead size of 3 mm. Based on dry weight, the bikaverin production was 30–100 times larger than found in submerged culture and approximately three times larger than reported for solid substrate fermentation.     

Formation and analysis of mannosylerythritol lipids secreted by Pseudozyma aphidis

Pseudozyma aphidis DSM 70725 was found to be a novel producer of mannosylerythritol lipids (MELs). The MELs were quantified by HPLC. Glucose as carbon source for precultivation supported growth well. By contrast, at concentrations >30 g l^–1 in preculture, subsequent MEL formation in the main culture with soybean oil as sole carbon source was reduced. The type of substrate supply considerably influenced MEL formation. High concentrations of soybean oil (80 ml l^–1) at init favored the production process when compared to a stepwise (20 ml l^–1) addition. Mannose or erythritol were suitable second carbon sources that enhanced the MEL yield with soybean oil as preferred primary substrate. After 10 days, a maximum yield of 75 g l^–1 was attained during shake-flask cultivation. Biofuel (rapeseed oil methyl ester) also resulted in high yields of MEL, but glucose reduced the MEL yield. Analysis by GC-MS showed that all fatty acids contained in MEL and derived from soybean oil or related methyl ester were degraded by C2-units to differing extents. The surface (water/air) and interfacial (water/hexadecane) tension of the MELs produced from different carbon sources were reduced to a minimum of 26.2 mN m^–1 and 1 mN m^–1, respectively.     

Evaluation of the potential of Aspergillus niger species for the bioconversion of L-phenylalanine into 2-phenylethanol

Aspergillus niger was explored, for the first time, for the production of 2-phenylethanol (a rose-like aroma) using L-phenylalanine as precursor. Among the strains screened, A. niger CMICC 298302 was shown to produce, in a culture medium containing 6 g L-phenylalanine l^–1 and 60 g glucose l^–1, 1375 mg 2-phenylethanol l^–1 with a productivity of 153 mg l^–1 day^–1 and a molar yield of 74%. 2-Phenylethanol concentrations of 1 to 2 g l^–1 led to a two-fold and ten-fold decrease, respectively, in the mycelial radial growth rate. However, 2-phenylethanol was synthesized as the sole aromatic product and accumulated in the culture broth.     

Optical resolution of RS-(±)-mandelic acid by Pseudomonas sp.

For the optical resolution of R-(–)-mandelic acid from (±)-mandelic acid, Pseudomonas sp. MA02, which assimilated S-(+)-mandelic acid as carbon and energy source, was isolated from soil. Using the fed-batch culture under optimal condition, R-(–)-mandelic acid was accumulated up to the maximum theoretical yield of 50% (30 g l^–1) and entiomeric excess of 99.4%.     

Enhanced production of pigment-free pullulan by a morphogenetically arrested Aureobasidium pullulans (ATCC 42023) in a two-stage fermentation with shift from soy bean oil to sucrose

A two-stage fermentation process was established for the production of pigment-free pullulan by the yeast-like fungus Aureobasidium pullulans (ATCC 42023). In the first stage, starting at pH 4.5 with soy bean oil as the carbon source and glutamate as the nitrogen source, a cell mass of about 15 g l^–1 dry cell weight was obtained, the population being restricted mainly to the yeast form of the microorganism (yeast form more than 90% of total cells) and the formation of pigment in the culture being prevented. Small amounts of pullulan (less than 2 g l^–1) are produced at this phase, and the viscosity remained low throughout the entire growth stage. When the oil and glutamate source were nearly exhausted (below 5% of initial amounts), the cells were shifted to a production stage with sucrose as the carbon source with continued nitrogen depletion. Production of pullulan started immediately with no lag period. During 50 h of the production phase more than 35 g l^–1 of pullulan was produced (productivity approx. 0.7 g l^–1), resulting in a large increase in the viscosity of the broth. The production yield of pollulan on the sugar was about 0.6 g g^–1. Morphogenesis from the yeast form of the microorganism to chlamydospores was still restrained and no pigment was formed in the culture during the production stage. A pigment-free polysaccharide, with a molecular mass in the range of 600–750 kDa, was recovered from the supernatant of the broth after solvent precipitation.