A novel short peptide is a specific inhibitor of the human immunodeficiency virus type 1 integrase

The retroviral encoded protein integrase (IN) is required for the insertion of the human immunodeficiency virus type 1 (HIV-1) proviral DNA into the host genome. In spite of the crucial role played by IN in the retroviral life cycle, which makes this enzyme an attractive target for the development of new anti-AIDS agents, very few inhibitors have been described and none seems to have a potential use in anti-HIV therapy. To obtain potent and specific IN inhibitors, we used the two-hybrid system to isolate short peptides. Using HIV-1 IN as a bait and a yeast genomic library as the source of inhibitory peptides (prey), we isolated a 33-mer peptide (I33) that bound tightly to the enzyme. I33 inhibited both in vitro IN activities, i.e. 3' end processing and strand transfer. Further analysis led us to select a shorter peptide, EBR28, corresponding to the N-terminal region of I33. Truncated variants showed that EBR28 interacted with the catalytic domain of IN interfering with the binding of the DNA substrate. Alanine single substitution of each EBR28 residue (alanine scanning) allowed the identification of essential amino acids involved in the inhibition. The EBR28 NMR structure shows that this peptide adopts an alpha-helical conformation with amphipathic properties. Additionally, EBR28 showed a significant antiviral effect when assayed on HIV-1 infected human cells. Thus, this potentially important short lead peptide may not only be helpful to design new anti-HIV agents, but also could prove very useful in further studies of the structural and functional characteristics of HIV-1 IN.     

Cross-reactive potential of rabbit antibodies raised against a cyclic peptide representing a chimeric V3 loop of HIV-1 gp120 studied by biosensor technique and ELISA

Abstract Rabbit antibodies were induced against a free cyclic peptide representing the chimeric sequence of a consensus V3 loop of HIV-1 gp120. The reactivity of these antibodies was tested in a biosensor system (BIAcore^™, Pharmacia AB, Uppsala, Sweden) and in ELISA with the peptide immunogen in its cyclic and linear forms, as well as with peptides corresponding to the V3 region of different HIV-1 variants. The antibodies reacted with all the peptides tested both in ELISA and in biosensor assays and recognized the cyclic form of the chimeric peptide better than the linear form. Although antibodies raised against the V3 region of particular HIV-1 variants cross-react with other HIV-1 strains, it seems that the use of a chimeric peptide as immunogen improved the cross-reactivity spectrum of recognition of the antibodies. The anti-V3 antibodies were also tested for their ability to neutralize in vitro four HIV-1 laboratory strains. Only the HIV_MN variant was found to be neutralized. Compared to conventional solid phase immunoassays, the BIAcore presents several advantages for measuring the differential reactivity of peptide analogues. In view of their broadly cross-reactive potential, antibodies raised against a consensus sequence should be useful in immunodiagnosis of viral antigenic variants.     

Candidate multi-epitope vaccines in aluminium adjuvant induce high levels of antibodies with predefined multi-epitope specificity against HIV-1

Some neutralizing epitopes on HIV-1 envelope proteins were identified to induce antibodies which could effectively inhibit the infection of different strains in vitro. But only very low levels of these antibodies were determined in the HIV-1 infected individuals. To increase the levels of protective antibodies in vivo, we suggested multi-epitope vaccine as a new strategy to induce high level of neutralization antibodies with predefined multi-epitope specificity. A synthesized epitope peptide MP (CG-GPGRAFY-G-ELDKWA-G-RILAVERYLKD) containing three neutralizing epitopes (GPGRAFY, ELDKWA, RILAVERYLKD) was conjugated to carrier protein KLH, and then used for immunization in mouse together with aluminium adjuvant or Freund's adjuvant (FA). The candidate MP-KLH multi-epitope vaccine in aluminium adjuvant could induce antibody response very strongly to the epitope peptide C-(RILAVERYLKD-G)2 and the immunosuppressive peptide (P1) (LQARILAVERYLKDQQL) (antibody titer: 1:51200), strongly to the epitope peptide C-(ELDKWA-G)4 and the C-domain peptide (P2) (1:12800), and moderately to the epitope peptide C-(GPGRAFY)4 and the V3 loop peptide (1:1600). The immunoblotting analysis demonstrated that the antibodies in sera could recognize P1, P2, V3 loop peptides and rsgp41 (aa 539-684). These results are similar with that in the case of PI-BSA in FA, and suggest that the multi-epitope vaccine in aluminium could induce high levels of antibodies of predefined multi-epitope specificity, which provides experimental evidence for the new strategy to develop an effective neutralizing antibody-based multi-epitope vaccine against HIV-1.     

Influence of carbohydrate moieties on the immunogenicity of human immunodeficiency virus type 1 recombinant gp160.

The role of carbohydrates in the immunogenicity of human immunodeficiency virus type 1 (HIV-1) glycoproteins (gp160 and gp120) remains poorly understood. We have analyzed the specificity and neutralizing capacity of antibodies raised against native gp160 or against gp160 deglycosylated by either endo F-N glycanase, neuraminidase, or alpha-mannosidase. Rabbits immunized with these immunogens produced antibodies that recognized recombinant gp160 (rgp160) from HIV-1 in a radioimmunoassay and in an enzyme-linked immunosorbent assay. Antibodies elicited by the different forms of deglycosylated gp160 were analyzed for their reactivity against a panel of synthetic peptides. Compared with anti-native gp160 antisera, serum reactivity to most peptides remained unchanged, or it could increase (peptide P41) or decrease. Only antibodies raised against mannosidase-treated gp160 failed to react with a synthetic peptide (peptide P29) within the V3 loop of gp120. Rabbits immunized with desialylated rgp160 generated antibodies which recognized not only rgp160 from HIV-1 but also rgp140 from HIV-2 at high titers. Although all antisera produced against glycosylated or deglycosylated rgp160 could prevent HIV-1 binding to CD4-positive cells in vitro, only antibodies raised against native or desialylated gp160 neutralized HIV-1 infectivity and inhibited syncytium formation between HIV-1-infected cells and noninfected CD4-positive cells, whereas antibodies raised against alpha-mannosidase-treated gp160 inhibited neither virus replication nor syncytium formation. These findings indicate that the carbohydrate moieties of gp160 can modulate the specificity and the protective efficiency of the antibody response to the molecule.     

Identification of interaction between HIV-1 glycoprotein 41 and integrase

Human immunodeficiency virus-1(HIV-1) encodes 15 viral proteins. Protein-protein interactions play a large role in the function of these proteins. In this study, we attempted to identify novel interactions between the HIV-1 proteins to better understand the role played by viral protein-protein interactions in the life cycle of HIV-1. Genes encoding the 15 viral proteins from the HIV-1 strain AD8 were inserted into the plasmids of a yeast two-hybrid system. By screening 120 pairs of proteins, interactions between seven pairs were found. This led to the discovery of an interaction between the HIV-1 proteins integrase(IN) and glycoprotein 41(gp41), which was confirmed by both co-immunoprecipitation(Co-IP) assays and fluorescence resonance energy transfer(FRET)imaging in live cells. In addition, it was found that the amino acids at positions 76–100 of gp41 are required for it to bind to IN. Deletion of this region from gp41 prevented its interaction with IN and reduced the production of HIV-1 in 293 T cells. This study provides new information on HIV-1protein-protein interactions which improves the understanding of the biological functions of gp41 and IN during the virus life cycle.     

Three Antigenic Regions in p17 of Human Immunodeficiency Virus Type 1 (HIV-1) Revealed by Mouse Monoclonal Antibodies and Human Antibodies in HIV-1 Carrier Sera

We investigated the murine antibody response to recombinant p17 (rp17) of human immunodeficiency virus type 1 (HIV-1) and the human antibody response directed to p17 in HIV-1 infection. Three large peptides covering residues 12-29, 53-87 and 87-115 of p17 were synthesized. The cysteine residues 57 and 87 of peptide 53-87 were reoxidized to form a disulfide bridge. Eighteen out of 19 murine monoclonal anti-rp17 antibodies had relatively high affinities (K_A = 1.9 × 10⁵?1.4 × 10⁸ M^?1) with one of the 3 p17 peptides in the liquid phase. Each monoclonal antibody reacted only with one particular peptide and had no reactivity with the other 2 p17 peptides. All the monoclonal antibodies reacted with rp17 in the liquid phase with a reasonable degree of affinity (K_A = 2.0 × 10⁵?1.8 × 10⁷ M^?1). Four HIV-1 carrier sera, which were positive in ELISA using rp17 as the antigen, reacted positively in an ELISA using 3 p17 peptides which were used to titrate murine monoclonal antibodies. Murine monoclonal antibodies having specificity for the 3 p17 peptides stained live HIV-1-infected cells by means of indirect membrane immunofluorescence, irrespective of their specificity. This suggests that the various portions of p17 (at least 3 regions of p17) were exposed on the surface of live infected cells, probably as short polypeptide chains.     

A synthetic peptide bearing the HIV-1 integrase 161-173 amino acid residues mediates active nuclear import and binding to importin alpha: characterization of a functional nuclear localization signal

In spite of recent efforts to elucidate the nuclear import pathway of the human immunodeficiency virus type 1 (HIV-1) integrase protein (IN), its exact route as well as the domains that mediate its import are still unknown. Here, we show that a synthetic peptide bearing the amino acid residues 161-173 of the HIV-1 IN is able to mediate active import of covalently attached bovine serum albumin molecules into nuclei of permeabilized cells and therefore was designated as nuclear localization signal-IN (NLS(IN)). A peptide bearing residues 161-173 in the reversed order showed low karyophilic properties. Active nuclear import was demonstrated by using fluorescence microscopy and a quantitative ELISA-based assay system. Nuclear import was blocked by addition of the NLS(IN) peptide, as well as by a peptide bearing the NLS of the simian virus 40 T-antigen (NLS-SV40). The NLS(IN) peptide partially inhibited nuclear import mediated by the full-length recombinant HIV-1 IN protein, indicating that the sequence of the NLS(IN) is involved in mediating nuclear import of the IN protein. The NLS(IN) as well as the full-length IN protein interacted specifically with importin alpha, binding of which was blocked by the NLS(IN) peptide itself as well as by the NLS-SV40.     

Design,synthesis and activity evaluation of novel peptide fusion inhibitors targeting HIV-1 gp41

Human immunodeficiency virus type 1 (HIV-1), the pathogen of acquired immunodeficiency syndrome (AIDS), causes about 2 million people to death every year. Fusion inhibitors targeted the envelope protein (gp41) represent a novel and alternative approach for anti-AIDS therapy, which terminates the HIV-1 life cycle at an early stage. Using CP621-652 as a template, a series of peptides were designed, synthesized and evaluated in vitro assays. An interesting phenomenon was found that the substitution of hydrophobic residues at solvent accessible sites could increase the anti-HIV activity when the C-terminal sequence was extended with an enough numbers of amino acids. After the active peptides was synthesized and evaluated, peptide 8 showed the best anti-HIV-1 IIIB whole cell activity (MAGI IC₅₀ = 53.02 nM). Further study indicated that peptide 8 bound with the gp41 NHR helix, and then blocked the conformation of 6-helix, thus inhibited virus–cell membrane fusion. The results would be helpful for the design of peptide fusion inhibitors against HIV-1 infection.     

Peptide inhibitors of HIV-1 integrase: From mechanistic studies to improved lead compounds

The HIV-1 integrase enzyme (IN) catalyzes integration of viral DNA into the host genome. We previously developed peptides that inhibit IN in vitro and HIV-1 replication in cells. Here we present the design, synthesis and evaluation of several derivatives of one of these inhibitory peptides, the 20-mer IN1. The peptide corresponding to the N-terminal half of IN1 (IN1 1–10) was easier to synthesize and much more soluble than the 20-mer IN1. IN1 1–10 bound IN with improved affinity and inhibited IN activity as well as HIV replication and integration in infected cells. While IN1 bound the IN tetramer, its shorter derivatives bound dimeric IN. Mapping the peptide binding sites in IN provided a model that explains this difference. We conclude that IN1 1–10 is an improved lead compound for further development of IN inhibitors.     

Correlation between shiftide activity and HIV-1 integrase inhibition by a peptide selected from a combinatorial library

The human immunodeficiency virus type 1 (HIV-1) integrase (IN) protein is an emerging target for the development of anti-HIV drugs. We recently described a new approach for inhibiting IN by “shiftides”—peptides that inhibit the protein by shifting its oligomerization equilibrium from the active dimer to the inactive tetramer. In this study, we used the yeast two-hybrid system with the HIV-1 IN as a bait and a combinatorial peptide aptamer library as a prey to select peptides of 20 amino acids that specifically bind IN. Five non-homologous peptides, designated as IN-1 to IN-5, were selected. ELISA studies confirmed that IN binds the free peptides. All the five peptides interact with IN with comparable affinity (K_d≈10 μM), as was revealed by fluorescence anisotropy studies. Only one peptide, IN-1, inhibited the enzymatic activity of IN in vitro and the HIV-1 replication in cultured cells. In correlation, fluorescence anisotropy binding experiments revealed that of the five peptides, only the inhibitory IN-1 inhibited the DNA binding of IN. Analytical gel filtration experiments revealed that only the IN-1 and not the four other peptides shifted the oligomerization equilibrium of IN towards the tetramer. Thus, the results show a distinct correlation between the ability of the selected peptides to inhibit IN activity and that to shift its oligomerization equilibrium.     

Peptides derived from HIV-1 Rev inhibit HIV-1 integrase in a shiftide mechanism

The HIV-1 Integrase protein (IN) mediates the integration of the viral cDNA into the host genome. IN is an emerging target for anti-HIV drug design, and the first IN-inhibitor was recently approved by the FDA. We have developed a new approach for inhibiting IN by "shiftides": peptides derived from its cellular binding protein LEDGF/p75 that inhibit IN by shifting its oligomerization equilibrium from the active dimer to an inactive tetramer. In addition, we described two peptides derived from the HIV-1 Rev protein that interact with IN and inhibit its activity in vitro and in cells. In the current study, we show that the Rev-derived peptides also act as shiftides. Analytical gel filtration and cross-linking experiments showed that IN was dimeric when bound to the viral DNA, but tetrameric in the presence of the Rev-derived peptides. Fluorescence anisotropy studies revealed that the Rev-derived peptides inhibited the DNA binding of IN. The Rev-derived peptides inhibited IN catalytic activity in vitro in a concentration-dependent manner. Inhibition was much more significant when the peptides were added to free IN before it bound the viral DNA than when the peptides were added to a preformed IN-DNA complex. This confirms that the inhibition is due to the ability of the peptides to shift the oligomerization equilibrium of the free IN toward a tetramer that binds much weaker to the viral DNA. We conclude that protein-protein interactions of IN may serve as a general valuable source for shiftide design.