Thermosensitive Poloxamer 407/Poly(Acrylic Acid) Hydrogels with Potential Application as Injectable Drug Delivery System

Thermosensitive hydrogels are of great interest for in situ gelling drug delivery. The thermosensitive vehicle with a gelation temperature in a range of 30–36°C would be convenient to be injected as liquid and transform into gel after injection. To prepare novel hydrogels gelling near body temperature, the gelation temperature of poloxamer 407 (PX) were tailored by mixing PX with poly(acrylic acid) (PAA). The gelation behaviors of PX/PAA systems as well as the interaction mechanism were investigated by tube inversion, viscoelastic, shear viscosity, DSC, SEM, and FTIR studies. The gelation temperature of the plain PX solutions at high concentration of 18, 20, and 22% (w/w) gelled at temperature below 28°C, which is out of the suitable temperature range. Mixing PX with PAA to obtain 18 and 20% (w/w) PX with 1% (w/w) PAA increased the gelation temperature to the desired temperature range of 30–36°C. The intermolecular entanglements and hydrogen bonds between PX and PAA may be responsible for the modulation of the gelation features of PX. The mixtures behaved low viscosity liquid at room temperature with shear thinning behavior enabling their injectability and rapidly gelled at body temperature. The gel strength increased, while the pore size decreased with increasing PX concentration. Metronidazole, an antibiotic used for periodontitis, was incorporated into the matrices, and the drug did not hinder their gelling ability. The gels showed the sustained drug release characteristic. The thermosensitive PX/PAA hydrogel could be a promising injectable in situ gelling system for periodontal drug delivery.     

Thermoreversible-mucoadhesive Gel for nasal delivery of sumatriptan

The purpose of the present study was to develop intranasal delivery systems of sumatriptan using thermoreversible polymer Pluronic F127 (PF 127) and mucoadhesive polymer Carbopol 934P (C934P). Formulations were modulated so as to have gelation temperature below 34°C to ensure gelation at physiological temperature after intranasal administration. Gelation temperature was determined by physical appearance as well as by rheological measurement. The gelation temperatures of the formulations decreased by addition of increasing concentrations of Carbopol (ie, from 29°C for 18% PF127 to 23.9°C for 18% PF127, 0.5% Carbopol). The mucoadhesive force in terms of detachment stress, determined using sheep nasal mucosal membrane, increased with increasing concentration of Carbopol. The results of in vitro drug permeation studies across sheep nasal mucosa indicate that effective permeation coefficient could be significantly increased by using in situ gelling formulation with Carbopol concentration 0.3% or greater. Finally, histopathological examination did not detect any damage during in vitro permeation studies. In conclusion, the PF 127 gel formulation of sumatriptan, with in situ gelling and mucoadhesive properties with increased permeation rate is promising for prolonging nasal residence time and thereby nasal absorption. Published: August 4, 2006     

Thermoreversible Nasal In situ Gel of Venlafaxine Hydrochloride: Formulation, Characterization, and Pharmacodynamic Evaluation

In order to improve the bioavailability of the antidepressant drug, venlafaxine hydrochloride, in situ mucoadhesive thermoreversible gel, was formulated using Lutrol F127 (18%) as a thermo gelling polymer. Mucoadhesion was modulated by trying carbopol 934, PVP K30, HPMC K4M, sodium alginate, tamarind seed gum, and carrageenan as mucoadhesive polymers. Results revealed that as the concentration of mucoadhesive polymer increased the mucoadhesive strength increased but gelation temperature decreased. Formulation was optimized on the basis of clarity, pH, gelation temperature, mucoadhesive strength, gel strength, viscosity, drug content, diffusion through sheep nasal mucosa, histopathological evaluation of mucosa, and pharmacodynamic study in rats. Final formulation T5 containing 18% Lutrol F127 and 0.3% PVP K30 was considered as an optimized formulation. T5 released 97.86 ± 0.073% drug in 150 min with a flux of 0.1545 mg cm⁻² min⁻¹ and gelation temperature 31.17 ± 0.30°C. Histopathological evaluation of nasal mucosa revealed that T5 formulation was safe for nasal administration as it caused no damage to nasal epithelium. From the results of pharmacodynamic study, mainly forced swim test (FST), it was concluded that venlafaxine hydrochloride was more effective as an antidepressant by nasal route as in situ gel nasal drops in comparison to oral administration of equivalent dose.Key words: lutrol F127, mucoadhesive, nasal in situ gel, thermoreversible, venlafaxine HCl     

A crude sword bean (Canavalia gladiata) extract is gelated by cooling

White sword bean (Canavalia gladiata) seeds have the potential to be utilized in the manufacturing of processed foods owing to their high protein and carbohydrate content. Our previous reports explored the use of the sword bean as a source of food materials by preparing extracts in distilled water. In the present study, we found that one such extract can be gelated by cooling. The gelling substances were extracted by boiling and simultaneously stirring a suspension containing ground beans. Few proteins were present in the gelated extract. We also examined the conditions under which gelation occurred and the gel melting temperature. The extract gelated at temperatures below 10 °C, and the resulting gel melted at those above 65 °C. This is the first report that gelling substances can be extracted from sword beans in large quantities. We expect that this gelling agent can be used for the production of processed foods.     

Formulation and Evaluation of <Emphasis Type="Italic">In Situ</Emphasis> Gelling Systems for Intranasal Administration of Gastrodin

Gastrodin is the major bioactive constituent of the traditional Chinese drug “Tianma.” It is used in the treatment of some nervous system diseases and can be transported to the brain via intranasal administration. In the current paper, the development of a novel ion-activated in situ gelling system for the nasal delivery of gastrodin is discussed. An in situ perfusion model was used to determine the absorption-rate constant of gastrodin through rat nasal mucosa. The optimal formulation was determined by measuring the critical cation concentration, anti-dilution capacity, gel expansion coefficient, water-holding capacity, and adhesive capacity. The best formulation consisted of 10% gastrodin, 0.5% deacetylated gellan gum as the gelatinizer, and 0.03% ethylparaben as the preservative. The rheological properties of gastrodin nasal in situ gels were also investigated. The viscosity and elasticity sharply increased at temperatures below 25°C. When physiological concentrations of cations were added into the preparation, the mixture gelled into a semi-solid. The results of an accelerated stability test show that gastrodin nasal in situ gels can be stable for more than 2 years. Mucociliary toxicity was evaluated using the in situ toad palate model and the rat nasal mucociliary method; both models demonstrated no measurable ciliotoxicity. Pharmacodynamic studies suggest that similar acesodyne and sedative effects were induced following intranasal administration of 50 mg/kg gastrodin nasal in situ gels or oral administration of 100 mg/kg gastrodin solution. The in situ gel preparation is a safe and effective nasal delivery system for gastrodin.     

Thermodynamics of gelation of sickle cell deoxyhemoglobin.

This paper describes the thermodynamic behavior of gels of deoxyhemoglobin S. The solubility of the protein with respect to assembled hemoglobin fibers has been measured using a sedimentation technique. The solubility in 0.15 m-potassium phosphate buffer (pH 7.15) is found to decrease with increasing temperature, attain a minimum value of 0.16 g cm^?3 at 37 °C, and then increase at higher temperatures. The amount of polymer present at various hemoglobin concentrations and temperatures is presented as part of a phase diagram that may be useful for the calibration of other measurement techniques. The effects of varying pH and urea concentration upon the solubility have also been studied.The heat absorption accompanying gelation has been measured by scanning calorimetry. Using sedimentation data on the amount of polymer formed, molar enthalpy changes are obtained. There is a large negative heat capacity change of ? 197 cal deg. mol^?1 and ΔH = 0 near 37 °C. Calorimetric molar enthalpy changes are found to agree with those calculated from the temperature dependence of the solubility by the van't Hoff equation.Our previous two-phase, two-component thermodynamic model of gelation is extended to include the effects of solution non-ideality. A large contribution to the activity of the hemoglobin in the solution phase results from the geometric effect of excluded volume. Incorporating solution phase non-ideality permits the calculation of standard state thermodynamic quantities for the gelation process at 37 °C: ΔG^O ? ?3 k cal mol^?1, ΔH^O ~ 0, ΔS^O ~ 10 cal deg.^?1 mol^?1. The excluded volume effect is also capable of explaining observations of the minimum gelling concentrations of hemoglobin mixtures containing deoxyhemoglobin S without requiring copolymerization of the non-S hemoglobin.     

Comparative Study to Investigate the Effect of Meloxicam or Minocycline HCl In Situ Gel System on Local Treatment of Periodontal Pockets

In situ gelling formulations allow easy application to the target area. Gelation is induced by physiological stimuli at the site of application where the formula attains semisolid properties and exerts sustained drug release. In situ gelling formulations containing either 3% meloxicam (Mx) or 2% minocycline HCl (MH) were prepared for local application into the periodontal pockets. Gel formulations were based on the thermosensitive Pluronic^® (Pl) and the pH-sensitive Carbopol^® (C) polymers. C gels were prepared in combination with HPMC (H) to decrease its acidity. The total percent drug released from Pl formulae was 21.72% after 1 week for Mx and 85% after 3 days for MH. Their release kinetics data indicated anomalous non-Fickian behavior that could be controlled by both diffusion and chain relaxation. Addition of MH to C/H gels (1:2.5) resulted in liquefaction, followed by drug precipitation. Regarding C/H gel containing Mx, it showed a prolonged release rate up to 7 days with an initial burst effect; the kinetics data revealed Fickian-diffusion mechanism. The in vitro antibacterial activity studies for MH gel in Pl revealed that the drug released exceeded the minimum inhibitory concentration (MIC) of MH against Staphylococcus aureus ATCC 6538; placebo gel showed no effect on the microorganism. Clinical evaluation of Pl gels containing either Mx or MH showed significant improvement in chronic periodontitis patients, manifested by decrease in pocket depth and gingival index and increase in bone density.     

Poloxamer 407-based intranasal thermoreversible gel of zolmitriptan-loaded nanoethosomes: formulation,optimization, evaluation and permeation studies

Zolmitriptan is the drug of choice for migraine, but low oral bioavailability (<50%) and recurrence of migraine lead to frequent dosing and increase in associated side effects. Increase in the residence time of drug at the site of drug absorption along with direct nose to brain targeting of zolmitriptan can be a solution to the existing problems. Hence, in the present investigation, thermoreversible intranasal gel of zolmitriptan-loaded nanoethosomes was formulated by using mucoadhesive polymers to increase the residence of the drug into the nasal cavity. The preparation of ethosomes was optimized by using 3² factorial design for percent drug entrapment efficiency, vesicle size, zeta potential, and polydispersity index. Optimized formulation E6 showed the vesicle size (171.67?nm) and entrapment efficiency (66%) when compared with the other formulations. Thermoreversible gels prepared by using poloxamer 407 showed the phase transition temperature at 32–33?°C which was in line with the nasal physiological temperature. The optimized ethosomes were loaded into the thermoreversible mucoadhesive gel optimized by varying concentrations of poloxamer 407, carbopol 934, HPMC K100, and evaluated for gel strength, gelation temperature, mucoadhesive strength, in vitro drug release, and ex vivo drug permeation, where G3 and G6 were found to be optimized formulations. In vitro drug release was studied by different kinetic models suggested that G3 (n?=?0.582) and G6 (n?=?0.648) showed Korsemeyer–Peppas (K_KP) model indicating non-Fickian release profiles. A permeation coefficient of 5.92 and 5.9?µg/cm² for G3 and G6, respectively, revealed very little difference in release rate after 24?h between both the formulations. Non-toxic nature of the gels on columnar epithelial cells was confirmed by histopathological evaluation.     

XM-6: A new gel-forming bacterial polysaccharide

A new extracellular microbial polysaccharide, XM-6, has been isolated from cultures of an Enterobacter species and shows unusual gelation properties of potential technological significance. The polysaccharide contains d-glucose, l-fucose and d-glucuronate in the approximate molar ratio 3:1:1. No significant amounts of acetate or pyruvate were detected. d-Glucuronate and some d-glucose are destroyed on periodate oxidation, but l-fucose and some d-glucose may be recovered intact, indicating the presence of some 1,3 linkages in the primary structure. The major oligosaccharide isolated from autohydrolysates was an aldobiuronic acid containing equal amounts of d-glucose and l-fucose.Thermally-reversible gels are formed on addition of salt to solutions of the polysaccharide. A preliminary investigation of the mechanism of gelation by optical rotation, circular dichroism, high resolution n.m.r. and mechanical spectroscopy suggests interchain association through conformationally ordered ‘junction zones’, with specific incorporation of site-bound cations within the ordered structures. In the sol state the polysaccharide shows the shear-rate and temperature dependence of viscosity typical of a disordered (‘random coil’) polymer solution. Divalent cations are, in general, more effective than monovalent cations in promoting gelation of XM-6, while trivalent cations normally cause precipitation. Within Groups I and II, optimum gelation is achieved with Na⁺ and Ca²⁺ (ionic radius ? 0·1 nm), with larger and smaller ions becoming progressively less effective. Both gel strength and melting temperature increase with increasing salt concentration.XM-6 forms gels of reasonable strength at unusually low concentrations of the polysaccharide. For example, gels comparable to those required for normal industrial or food applications may be obtained using 0·3% w/v XM-6 and 1% w/v NaCl. Gel strength increases with increasing polymer concentration but there is no systematic variation in melting point. The sol-gel transition of XM-6 is unusually sharp and, by suitable adjustment of salt concentration, can be made to occur just below body temperature (e.g. 30–35°C), with obvious implications for biomedical or food applications.     

Systematic Development of Transethosomal Gel System of Piroxicam: Formulation Optimization, <Emphasis Type="Italic">In Vitro</Emphasis> Evaluation,and <Emphasis Type="Italic">Ex Vivo</Emphasis> Assessment

Piroxicam is used in the treatment of rheumatoid arthritis, osteoarthritis, and other inflammatory diseases. Upon oral administration, it is reported to cause ulcerative colitis, gastrointestinal irritation, edema and peptic ulcer. Hence, an alternative delivery system has been designed in the form of transethosome. The present study describes the preparation, optimization, characterization, and ex vivo study of piroxicam-loaded transethosomal gel using the central composite design. On the basis of the prescreening study, the concentration of lipids and ethanol was kept in the range of 2–4% w/v and 0–40% v/v, respectively. Formulation was optimized by measuring drug retention in the skin, drug permeation, entrapment efficiency, and vesicle size. Optimized formulation was incorporated in hydrogel and compared with other analogous vesicular (liposomes, ethosomes, and transfersomes) gels for the aforementioned responses. Among the various lipids used, soya phosphatidylcholine (SPL 70) and ethanol in various percentages were found to affect drug retention in the skin, drug permeation, vesicle size, and entrapment efficiency. The optimized batch of transethosome has shown 392.730 μg cm^?2 drug retention in the skin, 44.312 μg cm^?2 h^?1 drug permeation, 68.434% entrapment efficiency, and 655.369 nm vesicle size, respectively. It was observed that the developed transethosomes were found superior in all the responses as compared to other vesicular formulations with improved stability and highest elasticity. Similar observations were noted with its gel formulation.     

Herbs in exercise and sports

Background

Central administration of ??-amino butyric acid (GABA) induces lower body temperature in animals in hot ambient air. However, it is still unknown whether oral GABA administration affects temperature regulation at rest in a hot environment in humans. Therefore, in the present study, we specifically hypothesized that systemic administration of GABA in humans would induce hypothermia in a hot environment and that this response would be observed in association with decreased heat production.

Methods

Eight male participants drank a 200-ml sports drink with 1 g of GABA (trial G) or without GABA (trial C), then rested for 30 minutes in a sitting position in a hot environment (ambient air temperature 33°C, relative humidity 50%).

Results

We found that changes in esophageal temperature from before drinking the sports drink were lower in trial G than in trial C (-0.046 ± 0.079°C vs 0.001 ± 0.063°C; P < 0.05), with lower heat production calculated by oxygen consumption (41 ± 5 W/m² vs 47 ± 8 W/m²; P < 0.05).

Conclusions

In this study, we have demonstrated that a single oral administration of GABA induced a larger decrease in body core temperature compared to a control condition during rest in a hot environment and that this response was concomitant with a decrease in total heat production.     

Microcapsules and Transdermal Patch: A Comparative Approach for Improved Delivery of Antidiabetic Drug

Glibenclamide (GL)-loaded microcapsules (MC) and transdermal patches (TDP) were formulated and in vitro and in vivo parameters compared to find out the best route of drug administration. The formulation TDP1 having a drug–polymer ratio 1:1 showed comparatively higher GL release and better permeation across mice skin (p < 0.05). From the comparative study, it was concluded that the transdermal system of GL produced better improvement compared to oral microcapsule administration (p < 0.05). The transdermal system exhibited comparatively slow and continuous supply of GL at a desired rate to systemic circulation avoiding metabolism, which improved day-to-day glycemic control in diabetic subjects. Transdermal system of GL exhibited better control of hyperglycemia and prolonged plasma half-life by transdermal systems (9.6 ± 1.2 h) in comparison with oral microcapsule (5.84 ± 2.1 h), indicating that the drug, when administered by transdermal systems, will remain in the body for a longer period. From the glucose tolerance test, transdermal route effectively maintained the normoglycemic levels in contrast to the oral group (MC1), which produced remarkable hypoglycemia ranging from −12.6 ± 2.1% to −18 ± 2.3%. The significantly high (p < 0.05) area under the curve values observed with transdermal system (1,346.2 ± 92.3 ng ml⁻¹ h⁻¹) also indicate increased bioavailability of the drug from these systems compared to the oral route (829.8 ± 76.4 ng ml⁻¹ h⁻¹).     

Enhanced Heat-induced Gelation of β-Lactoglobulin by α-Lactalbumin

Heat-induced gelation in a mixed system of α-lactalbumin (La) and β-lactoglobulin (Lg) was studied to elucidate the gelling properties of whey protein. An Lg concentration of 4% (w/v) was required for the formation of a self-supporting gel following heating at 80°C for 30 min in a 100 mM potassium phosphate buffer (pH 6.8). Solutions of La, even up to a protein concentration of 8% (w/v), did not gel under the same conditions. The addition of 6% La to 2% Lg caused a significant increase in the gel hardness, although each protein did not individually form a gel at these concentrations. By adding La to Lg, firmer gels were formed at a lower heating temperature, compared to that from Lg alone. La and Lg interacted to form a soluble aggregate through a thiol-disulfide interchange reaction during gel formation, and such an interaction was critical in the formation and stabilization of the gel network structure. We conclude that the enhancing effect of La on the gel hardness of Lg was due to the formation of a specific soluble aggregate, and that such an interaction between these proteins contributes to the properties of whey protein gels.     

Cellulose Derivatives Enhanced Stability of Alginate-Based Beads Loaded with <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> LAB12 against Low pH,High Temperature and Prolonged Storage

The susceptibility of probiotics to low pH and high temperature has limited their use as nutraceuticals. In this study, enhanced protection of probiotics via microencapsulation was achieved. Lactobacillus plantarum LAB12 were immobilised within polymeric matrix comprised of alginate (Alg) with supplementation of cellulose derivatives (methylcellulose (MC), sodium carboxymethyl cellulose (NaCMC) or hydroxypropyl methylcellulose (HPMC)). L. plantarum LAB12 encapsulated in Alg-HPMC(1.0) and Alg-MC(1.0) elicited improved survivability (91%) in simulated gastric conditions and facilitated maximal release (～100%) in simulated intestinal condition. Alg-HPMC(1.0) and Alg-MC(1.0) significantly reduced (P < 0.05) the viability loss of LAB12 (viability loss <7%) when compared to Alg alone (viability loss <13%) under extreme temperatures (75 and 90 °C). Four-week storage of encapsulated LAB12 at 4 °C yielded viable counts >7 log CFU g^?1. Alg-MC and Alg-HPMC improved the survival of LAB12 against simulated gastric condition (9.24 and 9.55 log CFU g^?1, respectively), temperature up to 90 °C (9.54 and 9.86 log CFU g^?1, respectively) and 4-week of storage at 4 °C (8.61 and 9.23 log CFU g^?1, respectively) with sustained release of probiotic in intestinal condition (>9 log CFU g^?1). These findings strongly suggest the potential of cellulose derivatives supplemented Alg bead as protective micro-transport for probiotic strains. They can be safely incorporated into new functional food or nutraceutical products.     

Biosorption of Chromium,Cadmium, and Cobalt from Aqueous Solution by Immobilized Living Cells of Chryseomonas luteola TEM 05

Abstract

In this work, the potential use of the immobilized cells of Chryseomonas luteola TEM 05 for the removal of Cr⁺⁶, Cd⁺² and Co⁺² ions from aqueous solutions was investigated. The living cells of C. luteola TEM 05 were firstly entrapped both in carrageenan and chitosan coated carrageenan gels and then used in biosoption of the metal ions in batch reactors at pH 6.0, 25°C, in 100 mg L^?1 of each metal solution. Besides this, a process of competitive biosorption of these metal ions was also described and compared to single metal ion adsorption in solution. According to the immobilization results, the replacement of KCl by KCl-chitosan as gelling agent improved the mechanical strength and thermal stability of the gel. In addition, the C. luteola TEM 05 immobilized carrageenan-chitosan gel system was quite more efficient for the fast adsorption of metal ions from aqueous solution than the carrageenan gels without biomass.     

Novel Jojoba Oil-Based Emulsion Gel Formulations for Clotrimazole Delivery

Jojoba oil-based emulgel formulations were prepared using different concentrations of various gelling agents, such as hydroxypropyl methylcellulose (HPMC) and Carbopol 934 P and combination of both. The prepared emulgels were physically evaluated for their stability after temperature cycle test, centrifugation and long-term shelf storage for 1 year at room temperature. The in vitro release at 37°C was studied to define the effect of the concentration and type of the gelling agent. A comparison between the formulated emulgels and two commercially available products, Candistan® and Canesten® creams, was carried out to judge their efficacy and stability. The prepared emulgels exhibited non-Newtonian shear thinning behavior with little or no thixotropy. Four emulgels showed excellent stability as they demonstrated consistent rheological model under different treatment conditions. The in vitro release test showed variation in the extent of percent drug released. The drug release from the commercial preparation was lower than some of the prepared emulgel formulae. One formula containing combination of the two gelling agents (HPMC and Carbopol 934 P), showed excellent stability and high extent of clotrimazole release was microbiologically evaluated against Candida albicans using cylinder and plate method. The selected formula showed superior antimycotic activity compared to the commercially available formulation. Further in vivo animal studies for the obtained stable formula is recommended.     

The Effect of Different Oral Doses of Hydroalcoholic Extract of Silymarin on the Blood Oxidative Stress Indicators in Streptozotocin Induced Diabetic Rats

The effect of oral administration of different doses of hydroalcoholic extract of silymarin on body weight, glucose concentration and indicators of oxidative stress superoxide dismutase (SOD), glutathione peroxidase (GPX), catalase (CAT) and malondialdehyde (MDA) was investigated in the present study. Fifty adult male Wistar rats were used. The animals were divided into five groups and oral route of administration was used in control group (0.9 %, NaCl), control group patients (0.9 %, NaCl), diabetic group (100 mg/kg, silymarin), diabetic group (125 mg/kg, silymarin), diabetic group (250 mg/kg, silymarin) for 14 days with gavage. Diabetes was induced by a single injection of streptozotocin (45 mg/kg, i.p.). Before and 3 days after injection, and at 7 and 14 days of treatment, the fasting glucose level and weight were measured. At the end of 14 days, animals were anesthetized with ether and blood samples were taken by heart puncture and were analyzed for oxidative stress indicators. The results showed that hydroalcoholic extract of silymarin can increase the average body weight and decrease glucose and, at the end of 14 days, decrease MDA level and increase the level of antioxidant enzymes (SOD, GPX, CAT) in red blood cells in a dose-dependent manner (P < 0.05). In conclusion, the hydroalcoholic extract of silymarin has an overall beneficial effect on body weight, glucose level and oxidative stress. Therefore, silymarin may reduce oxidative stress via increasing antioxidant enzyme activity.     

Bioprospecting of thermo- and osmo-tolerant fungi from mango pulp–peel compost for bioethanol production

The persistent edaphic stress on microbial succession due to dynamic changes during composting was explored for selection of multi-stress tolerant microbe(s) desirable for ethanol production. A total of 23 strains were isolated from mango compost using four successive enrichments in YP broth (g l^?1): glucose, 100; 150; 250 with ethanol (40) and cycloheximide (0.4) at 40 °C, pH 6.0. Based on multi-gene ribotyping, 14 yeasts (61 %) of Saccharomycetaceae, 2 filamentous fungi (8.6 %) and 7 bacteria (30.4 %) were obtained. Phenetic and phylogenetic analysis of the 14 yeasts revealed 64.3 % tolerant to 500 g l^?1 glucose, growth at 45 °C and resemblance to Candida sp. (14.3 %), Kluyveromyces marxianus (35.7 %), Pichia kudriavzevii (21.4 %) and Saccharomyces cerevisiae (28.6 %). Assessment of the 14 yeasts in glucose fermentation medium (pH 4.5 at 40 °C) showed ethanol productivity of ≥92 % by 12 yeasts with theoretical yields of 90–97 %. Fermentation of molasses (150 g l^?1 glucose equivalent) by P. kudriavzevii D1C at 40 °C resulted in 73.70 ± 0.02 g l^?1 ethanol and productivity of 4.91 ± 0.01 g l^?1 h^?1. Assessment of P. kudriavzevii D1C revealed multi-stress tolerance towards 5-hydroxymethyl furfural, ethanol (20 %, v/v), high gravity and H₂O₂ (0.3 M) indicating suitability for ethanol production using high gravity molasses and pre-treated lignocellulosic biomass fermentation.     

The Effect of Gel Microstructure on Simulated Gastric Digestion of Protein Gels

The objective of this study was to analyse the impact of the gel structure obtained by different heat-induced temperatures on the in vitro gastric digestibility at pH 2. To achieve this, gels were prepared from soy protein, pea protein, albumin from chicken egg white and whey protein isolate at varying temperatures (90, 120 and 140 °C) for 30 min. Gels were characterised prior to digestion via microstructure and SDS-PAGE analysis. Subsequently, the gastric digestion process was followed via the protein hydrolysis and HPSEC analysis up to 180 min. Peptides of different sizes (<5 kDa) were gradually formed during the digestion. Our results showed that gels induced at 140 °C were digested faster. The protein source and gelation temperature had great influence on the in vitro gastric protein digestibility.     

Chronic hypoxic incubation blunts thermally dependent cholinergic tone on the cardiovascular system in embryonic American alligator (Alligator mississippiensis)

Environmental conditions play a major role in shaping reptilian embryonic development, but studies addressing the impact of interactions between chronic and acute environmental stressors on embryonic systems are lacking. In the present study, we investigated thermal dependence of cholinergic and adrenergic cardiovascular tone in embryonic American alligators (Alligator mississippiensis) and assessed possible phenotypic plasticity in a chronic hypoxic incubation treatment. We compared changes in heart rate (f _H) and mean arterial blood pressure (P _M) for chronically hypoxic and normoxic-incubated embryos after cholinergic and adrenergic blockade following three different acute temperature treatments: (1) 30 °C (control incubation temperature), (2) acute, progressive decrease 30–24 °C then held at 24 °C, and (3) acute, progressive increase 30–36 °C then held at 36 °C. f _H progressively fell in response to decreasing temperature and rose in response to increasing temperature. P _M did not significantly change with decreasing temperature, but was lowered significantly with increasing acute temperature in the normoxic group at 90 % of development only. Propranolol administration (β adrenergic antagonist) produced a significant f _H decrease at 24, 30, and 36 °C that was similar at all temperatures for all groups. For normoxic-incubated embryos at 90 % of development, atropine administration (cholinergic antagonist) significantly increased f _H in both 24 and 36 °C treatments, but not in the 30 °C control treatment. This atropine response at 24 and 36 °C demonstrated acute thermally dependent cholinergic tone on f _H late in development for normoxic-incubated, but not chronically hypoxic-incubated embryos. Collectively, data indicated that cardiovascular control mechanisms in embryonic alligators may be activated by thermal extremes, and the maturation of control mechanisms was delayed by chronic hypoxia.