The disulfide bond pattern of salmon egg lectin 24K from the Chinook salmon Oncorhynchus tshawytscha

The disulfide bonds in the galactose-specific lectin SEL 24K from the egg of the Chinook salmon Oncorhynchus tshawytscha were determined by mass spectrometry. Four predictive in silico tools were used to determine the oxidation state of cysteines in the sequence and possible location of the disulfide bonds. A combination of tryptic digestion, HPLC separation, and chemical modifications were used to establish the location of seven disulfide bonds and one pair of free cysteines. After proteolysis, peptides containing one or two disulfide bonds were identified by reduction and mass spectral comparison. MALDI mass spectrometry was supported by chemical modification (iodoacetamide) and in silico digestion. The assignments of disulfide bonds were further confirmed by mass spectral fragmentation studies including in-source dissociation (ISD) and collision-induced dissociation (CID). The experimentally determined disulfide bonds and free Cys residues were only partially consistent with those generated by several automated public-domain algorithms.     

Combined use of ESI-MS and UV diode-array detection for localization of disulfide bonds in proteins: application to an alpha-L-fucosidase of pea.

A simplified strategy is described for the assignment of disulfide bonds in proteins of medium to high molecular mass (10-30 kDa). The method combines the use of high-performance liquid chromatography coupled to electrospray ionization mass spectrometry (HPLC-ESI-MS) and HPLC with UV diode-array detection (HPLC diode array). The denatured protein is subjected to proteolysis and the peptide mixture is divided into three fractions: (i) underivatized peptides, (ii) ethylpyridylated peptides, and (iii) reduced and ethylpyridylated peptides. The three peptide ensembles are then subjected to chromatographic and spectroscopic analysis. A systematic methodology is described to analyze the large amount of data obtained. The method was applied to the localization of disulfide bonds in alpha-L-fucosidase from pea. The two disulfide bonds were located between residues Cys64 and Cys109 and between Cys162 and Cys169, while Cys127 was free.     

Determination of the disulfide bond arrangement of Newcastle disease virus hemagglutinin neuraminidase. Correlation with a beta-sheet propeller structural fold predicted for paramyxoviridae attachment proteins

Disulfide bonds stabilize the structure and functions of the hemagglutinin neuraminidase attachment glycoprotein (HN) of Newcastle disease virus. Until this study, the disulfide linkages of this HN and structurally similar attachment proteins of other members of the paramyxoviridae family were undefined. To define these linkages, disulfide-linked peptides were produced by peptic digestion of purified HN ectodomains of the Queensland strain of Newcastle disease virus, isolated by reverse phase high performance liquid chromatography, and analyzed by mass spectrometry. Analysis of peptides containing a single disulfide bond revealed Cys(531)-Cys(542) and Cys(172)-Cys(196) linkages and that HN ectodomains dimerize via Cys(123). Another peptide, with a chain containing Cys(186) linked to a chain containing Cys(238), Cys(247), and Cys(251), was cleaved at Met(249) with cyanogen bromide. Subsequent tandem mass spectrometry established Cys(186)-Cys(247) and Cys(238)-Cys(251) linkages. A glycopeptide with a chain containing Cys(344) linked to a chain containing Cys(455), Cys(461), and Cys(465) was treated sequentially with peptide-N-glycosidase F and trypsin. Further treatment of this peptide by one round of manual Edman degradation or tandem mass spectrometry established Cys(344)-Cys(461) and Cys(455)-Cys(465) linkages. These data, establishing the disulfide linkages of all thirteen cysteines of this protein, are consistent with published predictions that the paramyxoviridae HN forms a beta-propeller structural fold.     

Profile of the disulfide bonds in acetylcholinesterase

The inter- and intrasubunit disulfide bridges for the 11 S form of acetylcholinesterase isolated from Torpedo californica have been identified. Localized within the basal lamina of the synapse, the dimensionally asymmetric forms of acetylcholinesterase contain either two (13 S) or three (17 S) sets of catalytic subunits linked to collagenous and noncollagenous structural subunits. Limited proteolysis of these molecules yields a tetramer of catalytic subunits that sediments at 11 S. Each catalytic subunit contains 8 cysteine residues which were identified following tryptic digestion of the reduced, 14C-carboxymethylated protein. The tryptic peptides were purified by gel filtration followed by reverse-phase high performance liquid chromatography (HPLC) and then sequenced. The disulfide bonding profile was determined by treating the native, nonreduced 11 S form of acetylcholinesterase with a fluorescent, sulfhydryl-specific reagent, monobromobimane, prior to tryptic digestion. Peptides again were resolved by gel filtration and reverse-phase HPLC. One fluorescent cysteine-containing peptide was identified, indicating that a single sulfhydryl residue, Cys231, was present in its reduced form. Three pairs of disulfide-bonded peptides were identified. These were localized in the polypeptide chain based on the cDNA-deduced sequence of the protein and were identified as Cys67-Cys94, Cys254-Cys265, and Cys402-Cys521. Hence, three loops are found in the secondary structure. Cys572, located in the carboxyl-terminal tryptic peptide, was disulfide-bonded to an identical peptide and most likely forms an intersubunit cross-link. Since the 6 cysteine residues in acetylcholinesterase that are involved in intrachain disulfide bonds are conserved in the sequence of the homologous protein thyroglobulin, it is likely that both proteins share a common folding pattern in their respective tertiary structures. Cys231 and the carboxyl-terminal cysteine residue Cys572 are not conserved in thyroglobulin.     

Determination of the positions of the disulfide bonds in aqualysin I (a thermophilic alkaline serine protease) of Thermus aquaticus YT-1

Aqualysin I is a heat-stable alkaline serine protease produced by Thermus aquaticus YT-1. Aqualysin I comprises 281 amino acid residues and contains four cysteine residues. The cysteine residues seemed to form disulfide bonds in the molecule. Thus, the positions of the disulfide bonds were investigated. Disulfide bond-containing peptides were identified by peptide mapping with HPLC before and after carboxymethylation of chymotryptic peptides of aqualysin I. The disulfide bond-containing peptides were isolated and then carboxymethylated. Carboxymethylcysteine-containing peptides were purified, and their amino acid compositions and sequences were determined. Based on the data obtained and the primary structure of aqualysin I, it was concluded that two disulfide bonds were formed between Cys67 and Cys99, and between Cys163 and Cys194.     

Human tissue factor contains thioester-linked palmitate and stearate on the cytoplasmic half-cystine

The state of the five half-cystine residues in human tissue factor (TF) has been characterized. The results indicate that the four half-cystines in the extracellular domain of TF form two disulfide bonds and the half-cystine in the cytoplasmic region is acylated by palmitic acid and stearic acid. The extracellular disulfide cross-links, Cys49-Cys57 and Cys186-Cys209, were deduced from the analysis of tryptic peptides. Acylation of the cytoplasmic half-cystine was demonstrated by purifying and characterizing fibroblast TF from cells labeled with [3H]palmitic acid. Radiolabeled fibroblast TF was observed by autoradiography following sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The tritiated material covalently bound to the protein was identified as [3H]palmitate and [3H]stearate by reverse-phase high-pressure liquid chromatography. Deacylation of TF with hydroxylamine resulted in the spontaneous generation of disulfide-linked TF dimers. This result suggests that the disulfide-linked TF dimer, a minor component of most TF preparations, and the recently described heterodimeric form of TF are artifacts produced by deacylation of Cys245 and subsequent interchain disulfide bond formation.     

The disulfide structure of mouse lysosome-associated membrane protein 1

The disulfide structure of mouse lysosome-associated membrane protein 1 has been determined by reverse-phase isolation and sequence analysis of the cysteine-containing tryptic fragments of the reduced and non-reduced deglycosylated protein. Half-cystines were distinguished (a) by their localization within tryptic or chymotryptic peptides that formed reverse-phase peaks unique to the reduced digests and (b) by their 3H-carboxymethylation only after reduction of the protein. The disulfide arrangement of the cysteines was assigned after isolation of disulfide-linked peptide pairs. Each pair chromatographed as a peak present in the nonreduced (but not the corresponding reduced) tryptic digest. NH2-terminal sequencing as well as reduction, alkylation, and rechromatography of the disulfide-linked fragments led to the following assignment of disulfide bonds: Cys11 and Cys50, Cys125 and Cys161, Cys198 and Cys235, and Cys303 and Cys340. This structure creates four 36-38-residue loops that are symmetrically placed within the two halves of the protein's intraluminal domain. The loops formed by the Cys11-Cys50 and Cys198-Cys235 bridges are homologous, and the Cys125-Cys161 and Cys303-cys340 loops form a second set of homologous domains. The conservation of cysteine residues among lysosome-associated membrane proteins 1 and 2 suggests that this disulfide arrangement is common to both members of this family of lysosomal membrane glycoproteins.     

A subgroup-specific antigenic site in the G protein of respiratory syncytial virus forms a disulfide-bonded loop.

An antigenic site (represented by 15 amino acids, residues 174 to 188, designated peptide 12) of the large glycoprotein G of respiratory syncytial virus was demonstrated to be subgroup specific in peptide enzyme-linked immunosorbent assay tests with murine monoclonal antibodies and human postinfection sera. The role of individual amino acids in this subgroup-specific site was determined by use of single-amino-acid-deletion sets of peptides. When monoclonal antibodies were reacted with the deletion sets, a broad amino acid dependence of 11 or 12 residues, Cys-176 (Ile-175 in subgroup B) to Cys-186, was found. Human postinfection sera exhibited a narrower reaction profile (for subgroup A, Cys-182 to Trp-183; for subgroup B, Cys-176 to Lys-183). Reduction of peptides on microtiter plates by treatment with dithiothreitol completely destroyed their antigenic activity in tests with monoclonal antibodies and human postinfection sera of subgroup B. A variant of peptide 12 containing all four cysteines of the G protein (represented by 16 amino acids, residues 172 to 187, designated peptide 12var) also was subgroup specific. We concluded that the activity of the antigenic site in tests with monoclonal antibodies for subgroups A and B appears to depend on intrapeptide disulfide bonds. Reactions with postinfection sera of subgroup B also may depend on a disulfide bond. In contrast, postinfection sera of subgroup A appeared to have the capacity to identify a subgroup-specific site in a linear form of the selected 15-amino-acid-long peptide. Treatment of peptides with dithiothreitol had no effect on their antigenic activity in tests with human postinfection sera of subgroup A. These findings have relevance for molecular engineering of peptide antigens for use in respiratory syncytial virus subgroup-specific site-directed serology.     

Identification of disulfide-containing peptides by performic acid oxidation and mass spectrometry

In addition to reducing the analysis time, the direct examination of proteolytic digests by fast atom bombardment mass spectrometry (FABMS) greatly extends the information that is available from peptide mapping experiments. Mass spectral data are particularly useful for identifying post-translationally modified peptides. For example, the molecular weight of a disulfide-containing peptide may be used to locate the disulfide bond in the protein from which the peptide was derived. This paper describes a new procedure, which is useful for identifying disulfide-bonded peptides. Peptides are treated with performic acid to modify certain residues and thereby cause a characteristic change in the peptide molecular weight. This change in molecular weight is determined by FABMS and used to help identify peptides. Results for a series of small peptides demonstrate that Cys, Met, and Trp are the only residues that undergo a change in molecular weight under the conditions used here. Furthermore, these changes in molecular weight are diagnostic for each of the residues. Cysteinyl-containing peptides are of particular interest, because their identification is essential for locating disulfide bonds. The molecular weight of a peptide increases by 48 mu for each cysteinyl residue present. This approach is used to identify peptides that contain both cysteinyl and cystinyl residues in the peptic digest of bovine insulin. The method is extended to the analysis of a tryptic digest of cyanogen bromide-treated ribonuclease A. A computer-assisted analysis procedure is used to demonstrate the specificity with which peptide molecular weight is related to specific segments of the protein.(ABSTRACT TRUNCATED AT 250 WORDS)     

Positions of disulfide bonds and N-glycosylation site in juvenile hormone binding protein

The juvenile hormone binding protein (JHBP) from Galleria mellonella hemolymph is a glycoprotein composed of 225 amino acid residues. It contains four Cys residues forming two disulfide bridges. In this study, the topography of the disulfide bonds as well as the site of glycan attachment in the JHBP molecule from G. mellonella was determined, using electrospray mass spectrometry. The MS analysis was performed on tryptic digests of JHBP. Our results show that the disulfide bridges link Cys10 and Cys17, and Cys151 and Cys195. Of the two potential N-glycosylation sites in JHBP, Asn4, and Asn94, only Asn94 is glycosylated. This site of glycosylation is also found in the fully biologically active recombinant JHBP expressed in the yeast Pichia pastoris.     

Assignment of the disulfide bonds in the sweet protein brazzein

The thermostable sweet protein brazzein consists of 54 amino acid residues and has four intramolecular disulfide bonds, the location of which is unknown. We found that brazzein resists enzymatic hydrolysis at enzyme/substrate ratios (w/w) of 1:100-1:10 at 35–40°C for 24–48 h. Brazzein was hydrolyzed using thermolysin at an enzyme/substrate ratio of 1:1 (w/w) in water, pH 5.5. for 6 h and at 50°C. The disulfide bonds were determined, by a combination of mass spectrometric analysis and amino acid sequencing of cystine-containing peptides, to be between Cys4-Cys52, Cys16-Cys37, Cys22-Cys47, and Cys26-Cys49. These disulfide bonds contribute to its thermostability. © 1996 John Wiley & Sons, Inc.     

2,2′‐Dipyridyl diselenide: A chemoselective tool for cysteine deprotection and disulfide bond formation

There are many examples of bioactive, disulfide‐rich peptides and proteins whose biological activity relies on proper disulfide connectivity. Regioselective disulfide bond formation is a strategy for the synthesis of these bioactive peptides, but many of these methods suffer from a lack of orthogonality between pairs of protected cysteine (Cys) residues, efficiency, and high yields. Here, we show the utilization of 2,2′‐dipyridyl diselenide (PySeSePy) as a chemical tool for the removal of Cys‐protecting groups and regioselective formation of disulfide bonds in peptides. We found that peptides containing either Cys(Mob) or Cys(Acm) groups treated with PySeSePy in trifluoroacetic acid (TFA) (with or without triisopropylsilane (TIS) were converted to Cys‐S–SePy adducts at 37 °C and various incubation times. This novel Cys‐S–SePy adduct is able to be chemoselectively reduced by five‐fold excess ascorbate at pH 4.5, a condition that should spare already installed peptide disulfide bonds from reduction. This chemoselective reduction by ascorbate will undoubtedly find utility in numerous biotechnological applications. We applied our new chemistry to the iodine‐free synthesis of the human intestinal hormone guanylin, which contains two disulfide bonds. While we originally envisioned using ascorbate to chemoselectively reduce one of the formed Cys‐S–SePy adducts to catalyze disulfide bond formation, we found that when pairs of Cys(Acm) residues were treated with PySeSePy in TFA, the second disulfide bond formed spontaneously. Spontaneous formation of the second disulfide is most likely driven by the formation of the thermodynamically favored diselenide (PySeSePy) from the two Cys‐S–SePy adducts. Thus, we have developed a one‐pot method for concomitant deprotection and disulfide bond formation of Cys(Acm) pairs in the presence of an existing disulfide bond.     

Use of proline-specific endopeptidase in the isolation of all four "native" disulfides of hen egg white lysozyme

The disulfide peptides from the tryptic digestion of cyanogen bromide-treated hen egg white lysozyme (HEWL) were isolated by reverse phase high performance liquid chromatography (HPLC) and identified by amino acid analysis. Three peptides containing the I-VIII, II-VII, and III-V + IV-VI disulfide bonds were obtained. The two-disulfide peptide was further digested with proline-specific endopeptidase (PCE) (EC 3.4.21.26). Amino acid analysis of digest peptides separated by HPLC showed four peptides with the IV-VI disulfide bond as well as a peptide with the III-V disulfide bond. The IV-VI peptides were produced by hydrolysis of several alanine-X bonds as well as the prolyl-cystine bond. Our studies show that alanyl peptide bonds to lysyl, seryl, and leucyl residues are susceptible to hydrolysis by PCE preparations, thus substantially extending its known specificity range. The two-disulfide peptide was also digested sequentially with thermolysin and PCE; the resulting IV-VI and III-V peptides were identified by HPLC and amino acid analysis. PCE showed substantial activity at pH 5.3 as well as at pH 8.3. The lower pH is useful in studies of proteins or peptides where base-catalyzed reactions must be limited.     

Determination of three disulfide bonds and one free sulfhydryl in the beta subunit of (Na,K)-ATPase

The oxidation state of the 7 cyst(e)ine residues of the beta subunit of lamb kidney (Na,K)-ATPase was determined. The fluorescent sulfhydryl-reactive reagent 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole was utilized before and after reduction of disulfide bonds to determine the number and location of disulfide bonds present in the beta subunit. Treatment of tryptic peptides of the beta subunit separated by reverse phase high performance liquid chromatography with a reducing agent and 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole allowed identification of which residues were disulfide-linked. The results indicated that there is only one free sulfhydryl, Cys44, and that Cys125 is disulfide-bonded to Cys148, Cys158 is disulfide-linked to Cys174, and Cys212 is disulfide-bonded to Cys275. All three disulfide bonds were shown to be reduced in the presence of high concentrations of beta-mercaptoethanol and elevated temperature. These conditions also lead to a loss of (Na,K)-ATPase activity.     

Amino acid sequence of an active fragment of potato proteinase inhibitor IIa.

The complete amino acid sequence of an active fragment of potato proteinase inhibitor IIa has been established by the Edman degradation procedure and the carboxypeptidase technique. Sequence analyses were carried out on the reduced and carboxymethylated active fragment and its tryptic peptides. To aid in the alignment of some tryptic peptides, the partial sequences of two fragments obtained by selective tryptic cleavage of the reactive site peptide bond of inhibitor IIa at acidic pH, with subsequent reduction and carboxymethylation, were also analyzed. The active fragment consisted of 45 amino acid residues including 6 half-cystine residues. Degradation of the intact active fragment by subtilisin [EC 3.4.21.14.] at pH 6.5. yielded 3 cystine-containing peptides. Sequence analyses of these peptides revealed that the 3 disulfide linkages were located between Cys(10) and Cys(24), Cys(14) and Cys(35), and Cys(20) and Cys(43). The reactive site peptide bond of inhibitor IIa, a Lys-Ser bond, was located between positions 32 and 33 of the active fragment. The overall sequence of the active fragment was quite different from those of potato chymotrypsin inhibitor I (subunit A) and potato carboxypeptidase inhibitor.     

Determination of the disulfide structure of sillucin, a highly knotted, cysteine-rich peptide, by cyanylation/cleavage mass mapping

The disulfide structure of sillucin, a highly knotted, cysteine-rich, antimicrobial peptide, isolated from Rhizomucor pusillus, has been determined to be Cys2--Cys7, Cys12--Cys24, Cys13--Cys30, and Cys14--Cys21 by disulfide mass mapping based on partial reduction and CN-induced cleavage enabled by cyanylation. The denatured 30-residue peptide was subjected to partial reduction by tris(2-carboxyethyl)phosphine hydrochloride at pH 3 to produce a mixture of partially reduced sillucin species; the nascent sulfhydryl groups were immediately cyanylated by 1-cyano-4-(dimethylamino)pyridinium tetrafluoroborate. The cyanylated species, separated and collected during reversed phase high-performance liquid chromatography, were treated with aqueous ammonia, which cleaved the peptide chain on the N-terminal side of cyanylated cysteine residues. The CN-induced cleavage mixture was analyzed by matrix-assisted laser desorption ionization time-of-flight mass spectrometry before and after complete reduction of residual disulfide bonds in partially reduced and cyanylated species to mass map the truncated peptides to the sequence. Because the masses of the CN-induced cleavage fragments of both singly and doubly reduced and cyanylated sillucin are related to the linkages of the disulfide bonds in the original molecule, the presence of certain truncated peptide(s) can be used to positively identify the linkage of a specific disulfide bond or exclude the presence of other possible linkages.     

Mode of disulfide bond formation of a heat-stable enterotoxin (STh) produced by a human strain of enterotoxigenic Escherichia coli

To determine the modes of three disulfide linkages in the heat-stable enterotoxin (STh) produced by a human strain of enterotoxigenic Escherichia coli, we synthesized STh(6-18), which consists of 13 amino acid residues and has the same intramolecular disulfide linkages as native STh [(1985) FEBS Lett. 181, 138-142], by stepwise and selective formation of disulfide bonds using different types of removable protecting groups for the Cys residues. Synthesis of the peptide with different modes of disulfide bond formation provided three peptides consistent with standard STh(6-18) in their physicochemical and biological properties, thereby indicating that the disulfide bonds in STh(6-18) are Cys-Cys-Glu-Leu-Cys-Cys-Asn-Pro-Ala-Cys-Thr-Gly-Cys.     

Amino acid sequence of Streptomyces metallo-proteinase inhibitor from Streptomyces nigrescens TK-23

Streptomyces Metallo-Proteinase Inhibitor (S-MPI) consists of 102 amino acid residues, including one methionine and two disulfide bridges. The complete amino acid sequence of S-MPI, including two disulfide bridges, was determined by sequencing of tryptic and chymotryptic peptides of two fragments obtained by cyanogen bromide cleavage followed by reduction and S-pyridylethylation of the protein. Incubation of the inhibitor with thermolysin slowly cleaved one peptide bond, Cys(64)-Val(65), which might be a reactive site of S-MPI.     

Determination of disulfide bonds in gamma-46 gliadin

The disulfide bonds in gamma-46 gliadin were identified: Cys173--Cys192, Cys212--Cys291, Cys165--Cys199 (or Cys200), Cys283--Cys200 (or Cys199). The disulfide-containing peptides were obtained by limited hydrolysis of the intact protein with chymotrypsin at an enzyme/substrate ratio of 1:1000 at 20 degrees C for 22 h with subsequent digestion of disulfide-containing fragments with trypsin and chymotrypsin. The locations of disulfide bonds were determined by sequencing disulfide-containing fractions and constituent peptides and comparison of the obtained sequences with the partial amino acid sequence of gamma-46 gliadin determined earlier.     

Disulfide bond structure of the atrial natriuretic peptide receptor extracellular domain: conserved disulfide bonds among guanylate cyclase-coupled receptors

The disulfide bond structure of the extracellular domain of rat atrial natriuretic peptide (ANP) receptor (NPR-ECD) has been determined by mass spectrometry (MS) and Edman sequencing. Recombinant NPR-ECD expressed in COS-1 cells and purified from the culture medium binds ANP with as high affinity as the natural ANP receptor. Reaction with iodoacetic acid yielded no S-carboxymethylcysteine, indicating that all six Cys residues in NPR-ECD are involved in disulfide bonds. Electrospray ionization MS of NPR-ECD deglycosylated by peptide-N-glycosidase F gave a molecular mass of 48377.5+/-1.6 Da, which was consistent with the presence of three disulfide bonds. Liquid chromatography MS analysis of a lysylendopeptidase digest yielded three cystine-containing fragments with disulfide bonds Cys(60)-Cys(86), Cys(164)-Cys(213) and Cys(423)-Cys(432) based on their observed masses. These bonds were confirmed by Edman sequencing of each of the three fragments. No evidence for an inter-molecular disulfide bond was found. The six Cys residues in NPR-ECD, forming a 1-2, 3-4, 5-6 disulfide pairing pattern, are strictly conserved among A-type natriuretic peptide receptors and are similar in B-type receptors. We found that in other families of guanylate cyclase-coupled receptors, the Cys residues involved in 1-2 and 5-6 disulfide pairs are conserved in nearly all, suggesting an important contribution of these disulfide bonds to the receptor's structure and function.