Characterization of the 5'' to 3'' exonuclease associated with Thermus aquaticus DNA polymerase.

Thermus aquaticus DNA polymerase was shown to contain an associated 5' to 3' exonuclease activity. Both polymerase and exonuclease activities cosedimented with a molecular weight of 72,000 during sucrose gradient centrifugation. Using a novel in situ activity gel procedure to simultaneously detect these two activities, we observed both DNA polymerase and exonuclease in a single band following either nondenaturing or denaturing polyacrylamide gel electrophoresis: therefore, DNA polymerase and exonuclease activities reside in the same polypeptide. As determined by SDS-polyacrylamide gel electrophoresis this enzyme has an apparent molecular weight of 92,000. The exonuclease requires a divalent cation (MgCl2 or MnCl2), has a pH optimum of 9.0 and excises primarily deoxyribonucleoside 5'-monophosphate from double-stranded DNA. Neither heat denatured DNA nor the free oligonucleotide (24-mer) were efficient substrates for exonuclease activity. The rate of hydrolysis of a 5'-phosphorylated oligonucleotide (24-mer) annealed to M13mp2 DNA was about twofold faster than the same substrate containing a 5'-hydroxylated residue. Hydrolysis of a 5'-terminal residue from a nick was preferred threefold over the same 5'-end of duplex DNA. The 5' to 3' exonuclease activity appeared to function coordinately with the DNA polymerase to facilitate a nick translational DNA synthesis reaction.     

Experimental and theoretical analysis of the invasive signal amplification reaction

The invasive signal amplification reaction is a sensitive method for single nucleotide polymorphism detection and quantitative determination of viral load and gene expression. The method requires the adjacent binding of upstream and downstream oligonucleotides to a target nucleic acid (either DNA or RNA) to form a specific substrate for the structure-specific 5' nucleases that cleave the downstream oligonucleotide to generate signal. By running the reaction at an elevated temperature, the downstream oligonucleotide cycles on and off the target leading to multiple cleavage events per target molecule without temperature cycling. We have examined the performance of the FEN1 enzymes from Archaeoglobus fulgidus and Methanococcus jannaschii and the DNA polymerase I homologues from Thermus aquaticus and Thermus thermophilus in the invasive signal amplification reaction. We find that the reaction has a distinct temperature optimum which increases with increasing length of the downstream oligonucleotide. Raising the concentration of either the downstream oligonucleotide or the enzyme increases the reaction rate. When the reaction is configured to cycle the upstream instead of the downstream oligonucleotide, only the FEN1 enzymes can support a high level of cleavage. To investigate the origin of the background signal generated during the invasive reaction, the cleavage rates for several nonspecific substrates that arise during the course of a reaction were measured and compared with the rate of the specific reaction. We find that the different 5' nuclease enzymes display a much greater variability in cleavage rates on the nonspecific substrates than on the specific substrate. The experimental data are compared with a theoretical model of the invasive signal amplification reaction.     

The helicase activity associated with hepatitis C virus nonstructural protein 3 (NS3).

To assess the RNA helicase activity of hepatitis C virus (HCV) nonstructural protein 3 (NS3), a polypeptide encompassing amino acids 1175 to 1657, which cover only the putative helicase domain, was expressed in Escherichia coli by a pET expression vector. The protein was purified to near homogeneity and assayed for RNA helicase activity in vitro with double-stranded RNA substrates prepared from a multiple cloning sequence and an HCV 5' nontranslated region (5'-NTR) or 3'-NTR. The enzyme acted successfully on substrates containing both 5' and 3' single-stranded regions (standard) or on substrates containing only the 3' single-stranded regions (3'/3') but failed to act on substrates containing only the 5' single-stranded regions (5'/5') or on substrates lacking the single-stranded regions (blunt). These results thus suggest 3' to 5' directionality for HCV RNA helicase activity. However, a 5'/5' substrate derived from the HCV 5'-NTR was also partially unwound by the enzyme, possibly because of unique properties inherent in the 5' single-stranded regions. Gel mobility shift analyses demonstrated that the HCV NS3 helicase could bind to either 5'- or 3'-tailed substrates but not to substrates lacking a single-stranded region, indicating that the polarity of the RNA strand to which the helicase bound was a more important enzymatic activity determinant. In addition to double-stranded RNA substrates, HCV NS3 helicase activity could displace both RNA and DNA oligonucleotides on a DNA template, suggesting that HCV NS3 too was disposed to DNA helicase activity. This study also demonstrated that RNA helicase activity was dramatically inhibited by the single-stranded polynucleotides. Taken altogether, our results indicate that the HCV NS3 helicase is unique among the RNA helicases characterized so far.     

Global conformations,hydrodynamics, and X-ray scattering properties of Taq and Escherichia coli DNA polymerases in solution

Escherichia coli polymerase 1 (Pol 1) and Thermus aquaticus Taq polymerase are homologous Type I DNA polymerases, each comprised of a polymerase domain, a proofreading domain (inactive in Taq), and a 5' nuclease domain. "Klenow" and "Klentaq" are the large fragments of Pol 1 and Taq and are functional polymerases lacking the 5' nuclease domain. In the available crystal structures of full-length Taq, the 5' nuclease domain is positioned in two different orientations: in one structure, it is extended out into solution, whereas in the other, it is folded up against the polymerase domain in a more compact structure. Analytical ultracentrifugation experiments report s20,w values of 5.05 for Taq, 4.1 for Klentaq, 5.3 for E. coli Pol 1, and 4.6 for Klenow. Measured partial specific volumes are all quite similar, indicating no significant differences in packing density between the mesophilic and thermophilic proteins. Small angle x-ray scattering studies report radii of gyration of 38.3 A for Taq, 30.7 A for Klentaq, and 30.5 A for Klenow. The hydrodynamic and x-ray scattering properties of the polymerases were also calculated directly from the different crystal structures using the programs HYDROPRO (Garcia De La Torre, J., Huertas, M. L., and Carrasco, B. (2000) Biophys J. 78, 719-730) and CRYSOL (Svergun, D. I., Barberato, C., and Koch, M. H. J. (1995) J. Appl. Crystalogr. 28, 768-773), respectively. The combined experimental and computational characterizations indicate that the full-length polymerases in solution are in a conformation where the 5' nuclease domain is extended into solution. Further, the radius of gyration, and hence the global conformation of Taq polymerase, is not altered by the binding of either matched primer template DNA or ddATP.     

Contacts between the 5' nuclease of DNA polymerase I and its DNA substrate

The 5' nuclease of DNA polymerase I (Pol I) of Escherichia coli is a member of an important class of prokaryotic and eukaryotic nucleases, involved in DNA replication and repair, with specificity for the junction between single-stranded and duplex DNA. We have investigated the interaction of the 5' nuclease domain with DNA substrates from the standpoint of both the protein and the DNA. Phosphate ethylation interference showed that the nuclease binds to the nucleotides immediately surrounding the cleavage site and also contacts the complementary strand one-half turn away, indicating that contacts are made to one face only of the duplex portion of the DNA substrate. Phosphodiester contacts were investigated further using DNA substrates carrying unique methylphosphonate substitutions, together with mutations in the 5' nuclease. These experiments suggested that two highly conserved basic residues, Lys(78) and Arg(81), are close to the phosphodiester immediately 5' to the cleavage site, while a third highly conserved residue, Arg(20), may interact with the phosphodiester 3' to the cleavage site. Our results provide strong support for a DNA binding model proposed for the related exonuclease from bacteriophage T5, in which the conserved basic residues mentioned above define the two ends of a helical arch that forms part of the single-stranded DNA-binding region. The nine highly conserved carboxylates in the active site region appear to play a relatively minor role in substrate binding, although they are crucial for catalysis. In addition to binding the DNA backbone around the cleavage point, the 5' nuclease also has a binding site for one or two frayed bases at the 3' end of an upstream primer strand. In agreement with work in related systems, 5' nuclease cleavage is blocked by duplex DNA in the 5' tail, but the enzyme is quite tolerant of abasic DNA or polarity reversal within the 5' tail.     

Streptococcus pneumoniae DNA polymerase I lacks 3''-to-5'' exonuclease activity: localization of the 5''-to-3'' exonucleolytic domain.

The Streptococcus pneumoniae polA gene was altered at various positions by deletions and insertions. The polypeptides encoded by these mutant polA genes were identified in S. pneumoniae. Three of them were enzymatically active. One was a fused protein containing the first 11 amino acid residues of gene 10 from coliphage T7 and the carboxyl-terminal two-thirds of pneumococcal DNA polymerase I; it possessed only polymerase activity. The other two enzymatically active proteins, which contained 620 and 351 amino acid residues from the amino terminus, respectively, lacked polymerase activity and showed only exonuclease activity. These two polymerase-deficient proteins and the wild-type protein were hyperproduced in Escherichia coli and purified. In contrast to the DNA polymerase I of Escherichia coli but similar to the corresponding enzyme of Thermus aquaticus, the pneumococcal enzyme appeared to lack 3'-to-5' exonuclease activity. The 5'-to-3' exonuclease domain was located in the amino-terminal region of the wild-type pneumococcal protein. This exonuclease activity excised deoxyribonucleoside 5'-monophosphate from both double- and single-stranded DNAs. It degraded oligonucleotide substrates to a decameric final product.     

Crystal structure of the 2'-5' RNA ligase from Thermus thermophilus HB8

The 2'-5' RNA ligase family members are bacterial and archaeal RNA ligases that ligate 5' and 3' half-tRNA molecules with 2',3'-cyclic phosphate and 5'-hydroxyl termini, respectively, to the product containing the 2'-5' phosphodiester linkage. Here, the crystal structure of the 2'-5' RNA ligase protein from an extreme thermophile, Thermus thermophilus HB8, was solved at 2.5A resolution. The structure of the 2'-5' RNA ligase superimposes well on that of the Arabidopsis thaliana cyclic phosphodiesterase (CPDase), which hydrolyzes ADP-ribose 1",2"-cyclic phosphate (a product of the tRNA splicing reaction) to the monoester ADP-ribose 1"-phosphate. Although the sequence identity between the two proteins is remarkably low (9.3%), the 2'-5' RNA ligase and CPDase structures have two HX(T/S)X motifs in their corresponding positions. The HX(T/S)X motifs play important roles in the CPDase activity, and are conserved in both the CPDases and 2'-5' RNA ligases. Therefore, the catalytic mechanism of the 2'-5' RNA ligase may be similar to that of the CPDase. On the other hand, the electrostatic potential of the cavity of the 2'-5' RNA ligase is positive, but that of the CPDase is negative. Furthermore, in the CPDase, two loops with low B-factors cover the cavity. In contrast, in the 2'-5' RNA ligase, the corresponding loops form an open conformation and are flexible. These characteristics may be due to the differences in the substrates, tRNA and ADP-ribose 1",2"-cyclic phosphate.     

Structure-specific DNA-induced conformational changes in Taq polymerase revealed by small angle neutron scattering

The DNA polymerase I from Thermus aquaticus (Taq polymerase) performs lagging-strand DNA synthesis and DNA repair. Taq polymerase contains a polymerase domain for synthesizing a new DNA strand and a 5'-nuclease domain for cleaving RNA primers or damaged DNA strands. The extended crystal structure of Taq polymerase poses a puzzle on how this enzyme coordinates its polymerase and the nuclease activities to generate only a nick. Using contrast variation solution small angle neutron scattering, we have examined the conformational changes that occur in Taq polymerase upon binding "overlap flap" DNA, a structure-specific DNA substrate that mimics the substrate in strand replacement reactions. In solution, apoTaq polymerase has an overall expanded equilibrium conformation similar to that in the crystal structure. Upon binding to the DNA substrate, both the polymerase and the nuclease domains adopt more compact overall conformations, but these changes are not enough to bring the two active sites close enough to generate a nick. Reconstruction of the three-dimensional molecular envelope from small angle neutron scattering data shows that in the DNA-bound form, the nuclease domain is lifted up relative to its position in the non-DNA-bound form so as to be in closer contact with the thumb and palm subdomains of the polymerase domain. The results suggest that a form of structure sensing is responsible for the coordination of the polymerase and nuclease activities in nick generation. However, interactions between the polymerase and the nuclease domains can assist in the transfer of the DNA substrate from one active site to the other.     

X-ray structure and activity of the yeast Pop2 protein: a nuclease subunit of the mRNA deadenylase complex

In Saccharomyces cerevisiae, a large complex, known as the Ccr4–Not complex, containing two nucleases, is responsible for mRNA deadenylation. One of these nucleases is called Pop2 and has been identified by similarity with PARN, a human poly(A) nuclease. Here, we present the crystal structure of the nuclease domain of Pop2 at 2.3 Å resolution. The domain has the fold of the DnaQ family and represents the first structure of an RNase from the DEDD superfamily. Despite the presence of two non-canonical residues in the active site, the domain displays RNase activity on a broad range of RNA substrates. Site-directed mutagenesis of active-site residues demonstrates the intrinsic ability of the Pop2 RNase D domain to digest RNA. This first structure of a nuclease involved in the 3′–5′ deadenylation of mRNA in yeast provides information for the understanding of the mechanism by which the Ccr4–Not complex achieves its functions.     

Junction ribonuclease: a ribonuclease HII orthologue from Thermus thermophilus HB8 prefers the RNA-DNA junction to the RNA/DNA heteroduplex

The genome of an extremely thermophilic bacterium, Thermus thermophilus HB8, contains a single ORF (open reading frame) encoding an RNase-HII-like sequence. Despite the presence of significant amino acid sequence identities with RNase (ribonuclease) HII enzymes, the ORF TTHA0198 could not suppress the temperature-sensitive growth defect of an RNase-H-deficient Escherichia coli mutant and the purified recombinant protein could not cleave an RNA strand of an RNA/DNA heteroduplex, suggesting that the TTHA0198 exhibited no RNase H activity both in vivo and in vitro. When oligomeric RNA-DNA/DNAs were used as a mimic substrate for Okazaki fragments, however, the protein cleaved them only at the 5' side of the last ribonucleotide at the RNA-DNA junction. In fact, the TTHA0198 protein prefers the RNA-DNA junction to the RNA/DNA hybrid. We have referred to this activity as JRNase (junction RNase) activity, which recognizes an RNA-DNA junction of the RNA-DNA/DNA heteroduplex and cleaves it leaving a mono-ribonucleotide at the 5' terminus of the RNA-DNA junction. E. coli and Deinococcus radiodurans RNases HII also cleaved the RNA-DNA/DNA substrates at the same site with a different metal-ion preference from that for RNase H activity, implying that the enzymes have JRNase activity as well as RNase H activity. The specialization in the JRNase activity of the RNase HII orthologue from T. thermophilus HB8 (Tth-JRNase) suggests that the JRNase activity of RNase HII enzymes might be independent of the RNase H activity.     

Wheat (Triticum vulgare) chloroplast nuclease ChSI exhibits 5' flap structure-specific endonuclease activity

The structure-specific ChSI nuclease from wheat (Triticum vulgare) chloroplast stroma has been previously purified and characterized in our laboratory. It is a single-strand-specific DNA and RNA endonuclease. Although the enzyme has been initially characterized and used as a structural probe, its biological function is still unknown. Localization of the ChSI enzyme inside chloroplasts, possessing their own DNA that is generally highly exposed to UV light and often affected by numerous redox reactions and electron transfer processes, might suggest, however, that this enzyme could be involved in DNA repair. The repair of some types of DNA damage has been shown to proceed through branched DNA intermediates which are substrates for the structure-specific DNA endonucleases. Thus we tested the substrate specificity of ChSI endonuclease toward various branched DNAs containing 5' flap, 5' pseudoflap, 3' pseudoflap, or single-stranded bulged structural motifs. It appears that ChSI has a high 5' flap structure-specific endonucleolytic activity. The catalytic efficiency (k(cat)/K(M)) of the enzyme is significantly higher for the 5' flap substrate than for single-stranded DNA. The ChSI 5' flap activity was inhibited by high concentrations of Mg(2+), Mn(2+), Zn(2+), or Ca(2+). However, low concentrations of divalent cations could restore the loss of ChSI activity as a consequence of EDTA pretreatment. In contrast to other known 5' flap nucleases, the chloroplast enzyme ChSI does not possess any 5'-->3' exonuclease activity on double-stranded DNA. Therefore, we conclude that ChSI is a 5' flap structure-specific endonuclease with nucleolytic activity toward single-stranded substrates.     

Molecular requirements for duplex recognition and cleavage by eukaryotic RNase III: discovery of an RNA-dependent DNA cleavage activity of yeast Rnt1p

Members of the double-stranded RNA (dsRNA) specific RNase III family are known to use a conserved dsRNA-binding domain (dsRBD) to distinguish RNA A-form helices from DNA B-form ones, however, the basis of this selectivity and its effect on cleavage specificity remain unknown. Here, we directly examine the molecular requirements for dsRNA recognition and cleavage by the budding yeast RNase III (Rnt1p), and compare it to both bacterial RNase III and fission yeast RNase III (Pac1). We synthesized substrates with either chemically modified nucleotides near the cleavage sites, or with different DNA/RNA combinations, and investigated their binding and cleavage by Rnt1p. Substitution for the ribonucleotide vicinal to the scissile phosphodiester linkage with 2'-deoxy-2'-fluoro-beta-d-ribose (2' F-RNA), a deoxyribonucleotide, or a 2'-O-methylribonucleotide permitted cleavage by Rnt1p, while the introduction of a 2', 5'-phosphodiester linkage permitted binding, but not cleavage. This indicates that the position of the phosphodiester link with respect to the nuclease domain, and not the 2'-OH group, is critical for cleavage by Rnt1p. Surprisingly, Rnt1p bound to a DNA helix capped with an NGNN tetraribonucleotide loop indicating that the binding of at least one member of the RNase III family is not restricted to RNA. The results also suggest that the dsRBD may accommodate B-form DNA duplexes. Interestingly, Rnt1p, but not Pac1 nor bacterial RNase III, cleaved the DNA strand of a DNA/RNA hybrid, indicating that A-form RNA helix is not essential for cleavage by Rnt1p. In contrast, RNA/DNA hybrids bound to, but were not cleaved by Rnt1p, underscoring the critical role for the nucleotide located at 3' end of the tetraloop and suggesting an asymmetrical mode of substrate recognition. In cell extracts, the native enzyme effectively cleaved the DNA/RNA hybrid, indicating much broader Rnt1p substrate specificity than previously thought. The discovery of this novel RNA-dependent deoxyribonuclease activity has potential implications in devising new antiviral strategies that target actively transcribed DNA.     

Domain exchange: chimeras of Thermus aquaticus DNA polymerase, Escherichia coli DNA polymerase I and Thermotoga neapolitana DNA polymerase

The intervening domain of the thermostable Thermus aquaticus DNA polymerase (TAQ: polymerase), which has no catalytic activity, has been exchanged for the 3'-5' exonuclease domain of the homologous mesophile Escherichia coli DNA polymerase I (E.coli pol I) and the homologous thermostable Thermotoga neapolitana DNA polymerase (TNE: polymerase). Three chimeric DNA polymerases have been constructed using the three-dimensional (3D) structure of the Klenow fragment of the E.coli pol I and 3D models of the intervening and polymerase domains of the TAQ: polymerase and the TNE: polymerase: chimera TaqEc1 (exchange of residues 292-423 from TAQ: polymerase for residues 327-519 of E.coli pol I), chimera TaqTne1 (exchange of residues 292-423 of TAQ: polymerase for residues 295-485 of TNE: polymerase) and chimera TaqTne2 (exchange of residues 292-448 of TAQ: polymerase for residues 295-510 of TNE: polymerase). The chimera TaqEc1 showed characteristics from both parental polymerases at an intermediate temperature of 50 degrees C: high polymerase activity, processivity, 3'-5' exonuclease activity and proof-reading function. In comparison, the chimeras TaqTne1 and TaqTne2 showed no significant 3'-5' exonuclease activity and no proof-reading function. The chimera TaqTne1 showed an optimum temperature at 60 degrees C, decreased polymerase activity compared with the TAQ: polymerase and reduced processivity. The chimera TaqTne2 showed high polymerase activity at 72 degrees C, processivity and less reduced thermostability compared with the chimera TaqTne1.     

Development of nonradioactive microtiter plate assays for nuclease activity

We have developed two microtiter plate assays for the detection of DNA cleavage by nucleases, using 3'-biotinylated oligonucleotide substrates. In the covalently linked oligonucleotide nuclease assay (CLONA), the biotinylated substrates are phosphorylated at the 5' end to facilitate their covalent immobilization on CovaLink NH plates. The cleavage of the covalently immobilized substrate by nucleases results in biotin release. The uncleaved substrate molecules are detected with an enzyme-avidin conjugate. The affinity-linked oligonucleotide nuclease assay (ALONA) makes use of substrates with a digoxigenin on the 5' end of the 3'-biotinylated DNA strand. The substrate binds specifically to the wells of streptavidin-coated microtiter plates, in which the nuclease reaction takes place. Uncleaved substrate retains the digoxigenin label, which is detected with an enzyme-labeled anti-digoxigenin antibody. We assessed the efficiency of these two assays by measuring S1 nuclease and DNase I activities, and the inhibitory effect of EDTA and aurintricarboxylic acid on the reaction. Both methods are more convenient than the standard radioactive nuclease assay and are suitable for high-throughput screening of potential nuclease inhibitors, nucleases, and catalytic antibodies. The ALONA assay was found to be more sensitive than the CLONA assay, with a performance similar to that of the standard nuclease assay.     

Purification and characterization of Thermus thermophilus UvrD

The DNA helicase UvrD (helicase II) protein plays an important role in nucleotide excision repair, mismatch repair, rolling circular plasmid replication, and in DNA replication. A homologue of the Escherichia coli uvrD gene was previously identified in Thermus thermophilus; however, to date, a UvrD helicase has not been purified and characterized from a thermophile. Here we report the purification and characterization of a UvrD protein from Thermus thermophilus HB8. The purified UvrD has a temperature range from 10 degrees to >65 degrees C, with an optimum of 50 degrees C, within the temperature limits of the assay. The enzyme had a requirement for divalent metal ions and nucleoside triphosphates which related to enzyme activity in the order ATP > dATP > dGTP > GTP > CTP > dCTP > UTP. A simple real-time helicase assay was developed that should facilitate detailed kinetic studies of the enzyme. Evaluation of helicase substrates using this assay showed that the enzyme was highly active on a double-stranded DNA with 5' recessed ends in comparison with substrates with 3' recessed or blunt ends, and supports enzyme translocation in a 3'-5' direction relative to the strand bound by the enzyme.