Quantitative trait loci (QTL) mapping of blush skin and flowering time in a European pear (<Emphasis Type="Italic">Pyrus communis</Emphasis>) progeny of ‘Flamingo’ × ‘Abate Fetel’

Blush skin and flowering time are agronomic traits of interest to the Agricultural Research Council (ARC) Infruitec-Nietvoorbij pear breeding programme. The genetic control of these traits was investigated in the pear progeny derived from ‘Flamingo’ (blush cultivar) × ‘Abate Fetel’ (slightly blush) made up of 121 seedlings. Blush skin was scored phenotypically over three seasons and flowering time was scored over two seasons. A total of 160 loci from 137 simple sequence repeat (SSR) markers were scored in the progeny and used to construct parental genetic linkage maps. Quantitative trait loci (QTL) analysis revealed two QTLs for blush skin, a major QTL on linkage group (LG) 5 in ‘Flamingo’, and a major QTL on LG9 in ‘Abate Fetel’. Two SSR markers, NB101a and SAmsCO865954, were closely linked with the major QTL on LG5 in ‘Flamingo’, with alleles 139 bp and 462 bp in coupling, respectively. These markers were present in approximately 90% of the seedlings scored as good blush (class 4) based on the average data set. These two markers were used to genotype other pear accessions to validate the QTL on LG5 with the view of marker-assisted selection. Two candidate genes, MYB86 and UDP-glucosyl transferase, were associated with the QTL on LG5 and MYB21 and MYB39 were associated with the QTL on LG9. QTL analysis for flowering time revealed a major QTL located on LG9 in both parents. Marker GD142 with allele 161 bp from ‘Flamingo’ was present in approximately 88% of the seedlings that flowered earlier than either parent, based on the average data set. The QTLs and linked markers will facilitate marker-assisted selection for the improvement of these complex traits.     

Quantitative trait locus (QTL) analysis of fruit-quality traits for mandarin breeding in Japan

The improvement of fruit quality is an important objective in citrus breeding. Using an F₁ segregating population from a cross between citrus cultivars ‘Harehime’ (‘E647’—‘Kiyomi’ [Citrus unshiu Marcow. ‘Miyagawa Wase’ × Citrus sinensis (L.) Osbeck ‘Trovita’] × ‘Osceola’—a cultivar of clementine [Citrus clementina hort. ex Tanaka] × ‘Orland’ [Citrus paradisi Macfad. ‘Duncan’ × Citrus tangerina hort. ex Tanaka] × ‘Miyagawa Wase’) and ‘Yoshida’ ponkan (Citrus reticulata Blanco ‘Yoshida’), a SNP-based genetic linkage map was constructed and quantitative trait locus (QTL) mapping of four fruit-quality traits (fruit weight, sugar content, peel puffing, and water rot) was performed. The constructed genetic linkage map of ‘Harehime’ consisted of 442 single nucleotide polymorphisms (SNPs) on 9 linkage groups (LGs) and covered 635.8 cM of the genome, while that of ‘Yoshida’ ponkan consisted of 332 SNPs on 9 LGs and covered 892.9 cM of its genome. We identified four QTLs associated with fruit weight, one QTL associated with sugar content, three QTLs associated with peel puffing, and one QTL associated with water rot. For these QTL regions, we estimated the haplotypes of the crossed parents and verified the founding cultivars that these QTLs were originated from and their inheritance in descendant cultivars using pedigree information. QTLs identified in this study provide useful information for marker-assisted breeding of citrus in Japan.     

QTL mapping of black rot (Guignardia bidwellii) resistance in the grapevine rootstock ‘Börner’ (V. riparia Gm183 × V. cinerea Arnold)

Key message

In the grapevine cultivar ‘Börner’ QTLs for black rot resistance were detected consistently in several independent experiments. For one QTL on chromosome 14 closely linked markers were developed and a detailed map provided.

Abstract

Black rot is a serious grapevine disease that causes substantial yield loss under unfavourable conditions. All traditional European grapevine cultivars are susceptible to the causative fungus Guignardia bidwellii which is native to North America. The cultivar ‘Börner’, an interspecific hybrid of V. riparia and V. cinerea, shows a high resistance to black rot. Therefore, a mapping population derived from the cross of the susceptible breeding line V3125 (‘Schiava grossa’ × ‘Riesling’) with ‘Börner’ was used to carry out QTL analysis. A resistance test was established based on potted plants which were artificially inoculated in a climate chamber with in vitro produced G. bidwellii spores. Several rating systems were developed and tested. Finally, a five class scheme was applied for scoring the level of resistance. A major QTL was detected based on a previously constructed genetic map and data from six independent resistance tests in the climate chamber and one rating of natural infections in the field. The QTL is located on linkage group 14 (Rgb1) and explained up to 21.8 % of the phenotypic variation (LOD 10.5). A second stable QTL mapped on linkage group 16 (Rgb2; LOD 4.2) and explained 8.5 % of the phenotypic variation. These two QTLs together with several minor QTLs observed on the integrated map indicate a polygenic nature of the black rot resistance in ‘Börner’. A detailed genetic map is presented for the locus Rgb1 with tightly linked markers valuable for the development for marker-assisted selection for black rot resistance in grapevine breeding.     

Genetic analyses of bolting in bulb onion (Allium cepa L.)

Key message

We present the first evidence for a QTL conditioning an adaptive trait in bulb onion, and the first linkage and population genetics analyses of candidate genes involved in photoperiod and vernalization physiology.

Abstract

Economic production of bulb onion (Allium cepa L.) requires adaptation to photoperiod and temperature such that a bulb is formed in the first year and a flowering umbel in the second. ‘Bolting’, or premature flowering before bulb maturation, is an undesirable trait strongly selected against by breeders during adaptation of germplasm. To identify genome regions associated with adaptive traits we conducted linkage mapping and population genetic analyses of candidate genes, and QTL analysis of bolting using a low-density linkage map. We performed tagged amplicon sequencing of ten candidate genes, including the FT-like gene family, in eight diverse populations to identify polymorphisms and seek evidence of differentiation. Low nucleotide diversity and negative estimates of Tajima’s D were observed for most genes, consistent with purifying selection. Significant population differentiation was observed only in AcFT2 and AcSOC1. Selective genotyping in a large ‘Nasik Red × CUDH2150’ F₂ family revealed genome regions on chromosomes 1, 3 and 6 associated (LOD > 3) with bolting. Validation genotyping of two F₂ families grown in two environments confirmed that a QTL on chromosome 1, which we designate AcBlt1, consistently conditions bolting susceptibility in this cross. The chromosome 3 region, which coincides with a functionally characterised acid invertase, was not associated with bolting in other environments, but showed significant association with bulb sucrose content in this and other mapping pedigrees. These putative QTL and candidate genes were placed on the onion map, enabling future comparative studies of adaptive traits.     

Candidate genes within a 143 kb region of the flower sex locus in <Emphasis Type="Italic">Vitis</Emphasis>

Wild Vitis species are dioecious plants, while the cultivated counterpart, Vitis vinifera subspec. vinifera, generally shows hermaphroditic flowers. In Vitis the genetic determinants of flower sex have previously been mapped to a region on chromosome 2. In a combined strategy of map-based cloning and the use of the publicly available grapevine reference genome sequence, the structure of the grapevine flower sex locus has been elucidated with the subsequent identification of candidate genes which might be involved in the development of the different flower sex types. In a fine mapping approach, the sex locus in grapevine was narrowed down using a population derived from a cross of a genotype with a Vitis vinifera background (‘Schiava Grossa’ × ‘Riesling’) with the male rootstock cv. ‘Börner’ (V. riparia × V. cinerea). A physical map of 143 kb was established from BAC clones spanning the 0.5 cM region defined by the closest flanking recombination break points. Sequencing and gene annotation of the entire region revealed several candidate genes with a potential impact on flower sex formation. One of the presumed candidate genes, an adenine phosphoribosyltransferase, was analysed in more detail. The results led to the development of a marker for the presence or absence of the female alleles, while the male and hermaphroditic alleles are still to be differentiated. The impact of other candidate genes is discussed, especially with regard to plant hormone actions. The markers developed will permit the selection of female breeding lines which do not require laborious emasculation thus considerably simplifying grapevine breeding. The genetic finger prints displayed that our cultivated grapevines frequently carry a female allele while homozygous hermaphrodites are rare.     

Development of SSR markers linked to QTL reducing leaf hair density and grapevine downy mildew resistance in <Emphasis Type="Italic">Vitis vinifera</Emphasis>

Dense leaf hairs of grapevines have been known to act as a preexisting defense structure for preventing the incidence of grapevine downy mildew, because the pathogen, Plasmopara viticola, needs water to invade grapevines, and water is repelled by a hydrophobic surface due to dense leaf hairs. In the present study, we performed regression analyses of downy mildew resistance with leaf hair density using hybrids of Vitis labrusca origin and confirmed the effect of leaf hairs. Reducing the repelling effect of leaf hairs by detergent application canceled the effect of leaf hair, which confirmed the hypothesis. Thereafter, based on QTL analyses in the population of V. vinifera ‘Muscat of Alexandria’ × the interspecific hybrid ‘Campbell Early,’ we identified a major locus in linkage group (LG) 5 of ‘Muscat of Alexandria’ controlling leaf hair density. This locus was previously reported as a small effect QTL for downy mildew resistance, however we found that the locus had high LOD scores explaining 71.9%–78.5% of the phenotypic variance of leaf hairs. Moreover, this locus was detected as a QTL for downy mildew resistance. The effect of this locus was confirmed in two other hybrid populations. Finally, we could successfully identify three traditional V. vinifera table grapes ‘Muscat of Alexandria,’ ‘Katta Kurgan,’ and ‘Parkent’ as the origin of the allele linked to hairlessness by defining the SSR haplotypes. The use of this locus for marker-assisted selections would be a promising strategy for producing grapevines with resistance by preexisting defense structure.     

Identification of quantitative trait loci (QTL) for fruit-quality traits and number of weeks of flowering in the cultivated strawberry

Fruit quality and repeat flowering are two major foci of several strawberry breeding programs. The identification of quantitative trait loci (QTL) and molecular markers linked to these traits could improve breeding efficiency. In this work, an F₁ population derived from the cross ‘Delmarvel’ × ‘Selva’ was used to develop a genetic linkage map for QTL analyses of fruit-quality traits and number of weeks of flowering. Some QTL for fruit-quality traits were identified on the same homoeologous groups found in previous studies, supporting trait association in multiple genetic backgrounds and utility in multiple breeding programs. None of the QTL for soluble solids colocated with a QTL for titratable acids, and, although the total soluble solid contents were significantly and positively correlated with titratable acids, the correlation coefficient value of 0.2452 and independence of QTL indicate that selection for high soluble solids can be practiced independently of selection for low acidity. One genomic region associated with the total number of weeks of flowering was identified quantitatively on LG IV-S-1. The most significant marker, FxaACAO2I8C-145S, explained 43.3 % of the phenotypic variation. The repeat-flowering trait, scored qualitatively, mapped to the same region as the QTL. Dominance of the repeat-flowering allele was demonstrated by the determination that the repeat-flowering parent was heterozygous. This genomic region appears to be the same region identified in multiple mapping populations and testing environments. Markers linked in multiple populations and testing environments to fruit-quality traits and repeat flowering should be tested widely for use in marker-assisted breeding.     

Heritability and identification of QTLs and underlying candidate genes associated with the architecture of the grapevine cluster (Vitis vinifera L.)

Key message

We have identified 19 QTLs for rachis architecture, a key and complex trait for grapevine production. Fifty out of 1,173 genes underlying these QTLs are candidates to be further explored.

Abstract

In the table grape industry, the rachis architecture has economic and management implications. Therefore, understanding the genetics of this trait is key for its breeding. The aim of this work was to identify genetic determinants of traits associated with the cluster architecture. Characterisations of eight traits was performed on a ‘Ruby Seedless’ × ‘Sultanina’ crossing (F₁: n = 137) during three seasons, with and without gibberellic acid (GA₃) applications. The genotypic effects and the genotype × GA₃ interactions were significant for several traits. Rachis length (rl), lateral shoulder length and node number along the central axis were the most prominent traits. On average, the heritability of these traits was ~71 %, with heritability of rl being 76 % as estimated under different seasons. Quantitative trait loci (QTLs) analyses showed that linkage group 5 (LG₅) and LG₁₈ harboured the largest number of QTLs for these traits. According to the variance explained, the main QTL (corresponding to rl) was found on LG₉. These QTLs were supported mainly by a paternal additive effect and revealed possible pleiotropic effects. Based on the grapevine reference genome, we identified 1,173 genes located under these QTL confidence intervals. Fifty of the 891 annotated genes of this list were selected for their further characterisation because of their possible participation in the rachis architecture. In conclusion, the QTLs detected indicate that these traits and their GA₃ responsiveness have a clear genetic basis. Due to the percentage of the total variance explained, they are good candidates to participate in the genetic determination of the cluster architecture.     

Mapping QTLs for physiological and biochemical traits related to grain yield under control and terminal heat stress conditions in bread wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

In order to detect genomic regions with different effects for some of the physiological and biochemical traits of wheat, four experiments were conducted at Research Farm of Agricultural and Natural Resources Research Center of Zabol in 2015–2016 and 2016–2017 growing seasons. The experiments were carried out using four alpha lattice designs with two replications under non-stress and terminal heat stress conditions. Plant materials used in this study included 167 recombinant inbred lines and their parents (‘SeriM82’ and ‘Babax’). Six traits including grain yield (GY), proline content (PRO), water soluble carbohydrates (WSC), maximum efficiency of photosystem II (Fv/Fm), cytoplasmic membrane stability (CMS) and chlorophyll content (CHL) were evaluated. Genetic linkage map consisted of 211 AFLP marker, 120 SSR marker and 144 DArT markers with 1864 cm length and 4.4 cm mean distance. QTL analysis was carried out using a mixed-model-based composite interval mapping (MCIM) method. By the combined analysis of normal phenotypic values, 27 additive QTLs and five pairs of epistatic effects were identified for studied traits, among which two additive and one epistatic QTL showed significant QTL?×?environment interactions. By the combined analysis of stress phenotypic values, a total of 26 QTLs with additive effects and 5 epistatic QTLs were detected, among which one additive and one epistatic QTL showed QTL?×?environment interactions. Six QTLs with major effects (QGY-2B, QGY-2D, QPro-5B, QWSC-4A, QFv/Fm-6A and QCMS-4B), which were common between two conditions could be useful for marker-assisted selection (MAS) in order to develop heat tolerant and high-performance wheat varieties.     

QTL mapping in autotetraploids using SNP dosage information

Key message

Dense linkage maps derived by analysing SNP dosage in autotetraploids provide detailed information about the location of, and genetic model at, quantitative trait loci.

Abstract

Recent developments in sequencing and genotyping technologies enable researchers to generate high-density single nucleotide polymorphism (SNP) genotype data for mapping studies. For polyploid species, the SNP genotypes are informative about allele dosage, and Hackett et al. (PLoS ONE 8:e63939, 2013) presented theory about how dosage information can be used in linkage map construction and quantitative trait locus (QTL) mapping for an F₁ population in an autotetraploid species. Here, QTL mapping using dosage information is explored for simulated phenotypic traits of moderate heritability and possibly non-additive effects. Different mapping strategies are compared, looking at additive and more complicated models, and model fitting as a single step or by iteratively re-weighted modelling. We recommend fitting an additive model without iterative re-weighting, and then exploring non-additive models for the genotype means estimated at the most likely position. We apply this strategy to re-analyse traits of high heritability from a potato population of 190 F₁ individuals: flower colour, maturity, height and resistance to late blight (Phytophthora infestans (Mont.) de Bary) and potato cyst nematode (Globodera pallida), using a map of 3839 SNPs. The approximate confidence intervals for QTL locations have been improved by the detailed linkage map, and more information about the genetic model at each QTL has been revealed. For several of the reported QTLs, candidate SNPs can be identified, and used to propose candidate trait genes. We conclude that the high marker density is informative about the genetic model at loci of large effects, but that larger populations are needed to detect smaller QTLs.     

Molecular dissection of QTL governing grain size traits employing association and linkage mapping in Basmati rice

Grain size is one of the key traits that determines the quality of Basmati rice from the consumers’ as well as the traders’ point of view. Though many genes governing grain size have been identified in indica and japonica, little work has been done in Basmati rice. The present study aims at dissection of a QTL region governing grain size traits in Basmati employing association and linkage mapping approaches. Association mapping revealed that three markers, i.e., RM 6024 (grain breadth), RM1237 and RM18582 (grain length-breadth ratio), which cover 889 kb in the targeted QTL region have been significantly associated with grain size traits. Using linkage mapping, the targeted QTL region has been further delimited to a physical distance of 268 kb that comprises 24 annotated genes. The gene expression analysis of parents, revealed 19 genes differentially expressing within the QTL. Of them, 15 genes showed high expression in Basmati370, while four were expressed in Jaya, and whereas five genes did not show any differential expression between parents. Among differentially expressed genes, a highly expressed gene in Basmati370, Os05g0374200 (Cytokinin dehydrogenase 1 precursor) seems to be involved in accumulation of cytokinins, thus affecting the grain size. Therefore, our findings demonstrated that by complimenting association and linkage mapping, it is likely to dissect a QTL governing grain size traits in Basmati rice and also the QTL could be a potential target for marker-assisted breeding and map-based cloning studies.     

Genetic dissection of powdery mildew resistance in interspecific half-sib grapevine families using SNP-based maps

Quantitative trait locus (QTL) identification in perennial fruit crops is impeded largely by their lengthy generation time, resulting in costly and labor-intensive maintenance of breeding programs. In a grapevine (genus Vitis) breeding program, although experimental families are typically unreplicated, the genetic backgrounds may contain similar progenitors previously selected due to their contribution of favorable alleles. In this study, we investigated the utility of joint QTL identification provided by analyzing half-sib families. The genetic control of powdery mildew was studied using two half-sib F₁ families, namely GE0711/1009 (MN1264 × MN1214; N = 147) and GE1025 (MN1264 × MN1246; N = 125) with multiple species in their ancestry. Maternal genetic maps consisting of 1077 and 1641 single nucleotide polymorphism (SNP) markers, respectively, were constructed using a pseudo-testcross strategy. Ratings of field resistance to powdery mildew were obtained based on whole-plant evaluation of disease severity. This 2-year analysis uncovered two QTLs that were validated on a consensus map in these half-sib families with improved precision relative to the parental maps. Examination of haplotype combinations based on the two QTL regions identified strong association of haplotypes inherited from ‘Seyval blanc’, through MN1264, with powdery mildew resistance. This investigation also encompassed the use of microsatellite markers to establish a correlation between 206-bp (UDV-015b) and 357-bp (VViv67) fragment sizes with resistance-carrying haplotypes. Our work is one of the first reports in grapevine demonstrating the use of SNP-based maps and haplotypes for QTL identification and tagging of powdery mildew resistance in half-sib families.     

An ultra-dense integrated linkage map for hexaploid chrysanthemum enables multi-allelic QTL analysis

Key message

We constructed the first integrated genetic linkage map in a polysomic hexaploid. This enabled us to estimate inheritance of parental haplotypes in the offspring and detect multi-allelic QTL.

Abstract

Construction and use of linkage maps are challenging in hexaploids with polysomic inheritance. Full map integration requires calculations of recombination frequency between markers with complex segregation types. In addition, detection of QTL in hexaploids requires information on all six alleles at one locus for each individual. We describe a method that we used to construct a fully integrated linkage map for chrysanthemum (Chrysanthemum × morifolium, 2n = 6x = 54). A bi-parental F1 population of 406 individuals was genotyped with an 183,000 SNP genotyping array. The resulting linkage map consisted of 30,312 segregating SNP markers of all possible marker dosage types, representing nine chromosomal linkage groups and 107 out of 108 expected homologues. Synteny with lettuce (Lactuca sativa) showed local colinearity. Overall, it was high enough to number the chrysanthemum chromosomal linkage groups according to those in lettuce. We used the integrated and phased linkage map to reconstruct inheritance of parental haplotypes in the F1 population. Estimated probabilities for the parental haplotypes were used for multi-allelic QTL analyses on four traits with different underlying genetic architectures. This resulted in the identification of major QTL that were affected by multiple alleles having a differential effect on the phenotype. The presented linkage map sets a standard for future genetic mapping analyses in chrysanthemum and closely related species. Moreover, the described methods are a major step forward for linkage mapping and QTL analysis in hexaploids.

     

Functions of EDS1-like and PAD4 genes in grapevine defenses against powdery mildew

The molecular interactions between grapevine and the obligate biotrophic fungus Erysiphe necator are not understood in depth. One reason for this is the recalcitrance of grapevine to genetic modifications. Using defense-related Arabidopsis mutants that are susceptible to pathogens, we were able to analyze key components in grapevine defense responses. We have examined the functions of defense genes associated with the salicylic acid (SA) pathway, including ENHANCED DISEASE SUSCEPTIBILITY 1 (EDS1), EDS1-LIKE 2 (EDL2), EDL5 and PHYTOALEXIN DEFICIENT 4 (PAD4) of two grapevine species, Vitis vinifera cv. Cabernet Sauvignon, which is susceptible to E. necator, and V. aestivalis cv. Norton, which is resistant. Both VaEDS1 and VvEDS1 were previously found to functionally complement the Arabidopsis eds1-1 mutant. Here we show that the promoters of both VaEDS1 and VvEDS1 were induced by SA, indicating that the heightened defense of Norton is related to its high SA level. Other than Va/VvEDS1, only VaEDL2 complemented Arabidopsis eds1-1, whereas Va/VvPAD4 did not complement Arabidopsis pad4-1. Bimolecular fluorescence complementation results indicated that Vitis EDS1 and EDL2 proteins interact with Vitis PAD4 and AtPAD4, suggesting that Vitis EDS1/EDL2 forms a complex with PAD4 to confer resistance, as is known from Arabidopsis. However, Vitis EDL5 and PAD4 did not interact with Arabidopsis EDS1 or PAD4, correlating with their inability to function in Arabidopsis. Together, our study suggests a more complicated EDS1/PAD4 module in grapevine and provides insight into molecular mechanisms that determine disease resistance levels in Vitis species native to the North American continent.     

Tetralocular ovary and high silique width in yellow sarson lines of Brassica rapa (subspecies trilocularis) are due to a mutation in Bra034340 gene,a homologue of CLAVATA3 in Arabidopsis

Key message

Genetic locus for tetralocular ovary ( tet - o ) in Brassica rapa was identified and it was shown that the number of locules and width of silique are associated.

Abstract

Brassica rapa is a highly polymorphic species containing many vegetables and oleiferous types. An interesting group of oleiferous types is the yellow sarson group (subspecies trilocularis) grown mostly in eastern India. This group contains lines that have bilocular ovaries, a defining trait of Brassicaceae, but also lines that have tetralocular ovaries. Yellow sarson lines commonly have high silique width which is further enhanced in the tetralocular types. We mapped the locus influencing tetralocular ovary in B. rapa using three mapping populations (F₂, F₆ and F₇) derived from a cross between Chiifu (subspecies pekinensis, having bilocular ovary) and Tetralocular (having tetralocular ovary). QTL mapping of silique width was undertaken using the three mapping populations and a F₂ population derived from a cross between Chiifu and YSPB-24 (a bilocular line belonging to yellow sarson group). Qualitative mapping of the trait governing locule number (tet-o) in B. rapa mapped the locus to linkage group A4. QTL mapping for silique width detected a major QTL on LG A4, co-mapping with the tet-o locus in bilocular/tetralocular cross. This QTL was not detected in the bilocular/bilocular cross. Saturation mapping of the tet-o region with SNP markers identified Bra034340, a homologue of CLAVATA3 of Arabidopsis thaliana, as the candidate gene for locule number. A C → T transition at position 176 of the coding sequence of Bra034340 revealed co-segregation with the tetralocular phenotype. The study of silique related traits is of interest both for understanding evolution under artificial selection and for breeding of cultivated Brassica species.     

Linkage analysis and identification of quantitative trait loci associated with freeze tolerance and turf quality traits in St. Augustinegrass

St. Augustinegrass [Stenotaphrum secundatum (Walt.) Kuntze] is a warm-season turfgrass commonly grown in the southern USA. In this study, the first linkage map for all nine haploid chromosomes of the species was constructed for cultivar ‘Raleigh’ and cultivar ‘Seville’ using a pseudo-F₂ mapping strategy. A total of 160 simple sequence repeat markers were mapped to nine linkage groups (LGs) covering a total distance of 1176.24 cM. To demonstrate the usefulness of the map, quantitative trait loci (QTL) were mapped controlling field winter survival, laboratory-based freeze tolerance, and turf quality traits. Multiple genomic regions associated with these traits were identified. Moreover, overlapping QTL were found for winterkill and spring green up on LG 3 (99.21 cM); turf quality, turf density, and leaf texture on LG 3 (68.57–69.50 cM); and surviving green tissue and regrowth on LGs 1 (38.31 cM), 3 (77.70 cM), 6 (49.51 cM), and 9 (34.20 cM). Additional regions, where QTL identified in both field and laboratory-based/controlled environment freeze testing co-located, provided strong support that these regions are good candidates for true gene locations. These results present the first complete linkage map produced for St. Augustinegrass, providing a template for further genetic mapping. Additionally, markers linked to the QTL identified may be useful to breeders for transferring these traits into new breeding lines and cultivars.     

QTL mapping of domestication and diversifying selection related traits in round-fruited semi-wild Xishuangbanna cucumber (<Emphasis Type="Italic">Cucumis sativus</Emphasis> L. var. <Emphasis Type="Italic">xishuangbannanesis</Emphasis>)

Key message

QTL analysis revealed 11 QTL underlying flowering time and fruit size variation in the semi-wild Xishuangbanna cucumber, of which, FT6.2 and FS5.2 played the most important roles in determining photoperiod-dependent flowering time and round-fruit shape, respectively.

Abstract

Flowering time and fruit size are two important traits in domestication and diversifying selection in cucumber, but their genetic basis is not well understood. Here we reported QTL mapping results on flowering time and fruit size with F₂ and F_2:3 segregating populations derived from the cross between WI7200, a small fruited, early flowering primitive cultivated cucumber and WI7167, a round-fruited, later flowering semi-wild Xishuangbanna (XIS) cucumber. A linkage map with 267 microsatellite marker loci was developed with 138 F₂ plants. Phenotypic data of male and female flowering time, fruit length and diameter and three other traits (mature fruit weight and number, and seedling hypocotyl length) were collected in multiple environments. Three flowering time QTL, FT1.1, FT5.1 and FT6.2 were identified, in which FT6.2 played the most important role in conferring less photoperiod sensitive early flowering during domestication whereas FT1.1 seemed more influential in regulating flowering time within the cultivated cucumber. Eight consensus fruit size QTL distributed in 7 chromosomes were detected, each of which contributed to both longitudinal and radial growth in cucumber fruit development. Among them, FS5.2 on chromosome 5 exhibited the largest effect on the determination of round fruit shape that was characteristic of the WI7167 XIS cucumber. Possible roles of these flowering time and fruit size QTL in domestication of cucumber and crop evolution of the semi-wild XIS cucumber, as well as the genetic basis of round fruit shape in cucumber are discussed.

     

Genome-wide association mapping of yield and yield components of spring wheat under contrasting moisture regimes

Key message

A stable QTL that may be used in marker-assisted selection in wheat breeding programs was detected for yield, yield components and drought tolerance-related traits in spring wheat association mapping panel.

Abstract

Genome-wide association mapping has become a widespread method of quantitative trait locus (QTL) identification for many crop plants including wheat (Triticum aestivum L.). Its benefit over traditional bi-parental mapping approaches depends on the extent of linkage disequilibrium in the mapping population. The objectives of this study were to determine linkage disequilibrium decay rate and population structure in a spring wheat association mapping panel (n = 285–294) and to identify markers associated with yield and yield components, morphological, phenological, and drought tolerance-related traits. The study was conducted under fully irrigated and rain-fed conditions at Greeley, CO, USA and Melkassa, Ethiopia in 2010 and 2011 (five total environments). Genotypic data were generated using diversity array technology markers. Linkage disequilibrium decay rate extended over a longer genetic distance for the D genome (6.8 cM) than for the A and B genomes (1.7 and 2.0 cM, respectively). Seven subpopulations were identified with population structure analysis. A stable QTL was detected for grain yield on chromosome 2DS both under irrigated and rain-fed conditions. A multi-trait region significant for yield and yield components was found on chromosome 5B. Grain yield QTL on chromosome 1BS co-localized with harvest index QTL. Vegetation indices shared QTL with harvest index on chromosome 1AL and 5A. After validation in relevant genetic backgrounds and environments, QTL detected in this study for yield, yield components and drought tolerance-related traits may be used in marker-assisted selection in wheat breeding programs.