Detection of quantitative trait loci for meat quality traits in cattle

A whole-genome scan was carried out to detect quantitative trait loci (QTL) affecting sensory, organoleptic, physical and chemical properties of meat. The study used phenotypic data from 235 second-generation cross-bred bull calves of a Charolais × Holstein experimental population. Loin muscle samples were evaluated for yield force, intramuscular fat and nitrogen contents, myofibrillar fragmentation index, haem pigment concentration, moisture content and pH at 24 h postmortem. A sensory assessment was performed on grilled loin and roasted silverside joints by trained panellists. A linear regression analysis based on 165 markers revealed 35 QTL at the 5% chromosome-wide significance level (20 for sensory traits and 15 for physical and chemical traits), five of which were highly significant ( F -value: ≥9). The most significant QTL was located on chromosome 6 (with the best likely position at 39 cM) and affected haem pigment concentration. The Holstein allele for this QTL was associated with an increase of 0.53 SD in the haem scores. A QTL for pH_24h was identified on chromosome 14 (at 40 cM) and a QTL for moisture content was identified on chromosome 22 (at 21 cM). Two highly significant QTL were identified for sensory panel-assessed traits: beef odour intensity (grilled sample) on chromosome 10 (at 119 cM), and juiciness (roast sample) on chromosome 16 (at 70 cM). The proportion of phenotypic variance explained by the significant QTL ranged from 3.6% (for nitrogen content on chromosome 10) to 9.5% (for juiciness, roast sample on chromosome 16).     

Identification of quantitative trait loci for production traits in commercial pig populations

The aim of this study was to investigate methods for detecting QTL in outbred commercial pig populations. Several QTL for back fat and growth rate, previously detected in experimental resource populations, were examined for segregation in 10 different populations. Two hundred trait-by-population-by-chromosome tests were performed, resulting in 20 tests being significant at the 5% level. In addition, 53 QTL tests for 11 meat quality traits were declared significant, using a subset of the populations. These results show that a considerable amount of phenotypic variance observed in these populations can be explained by major alleles segregating at several of the loci described. Thus, despite a relatively strong selection pressure for growth and back fat traits in these populations, these alleles have not yet reached fixation. The approaches used here demonstrate that it is possible to verify segregation of QTL in commercial populations by limited genotyping of a selection of informative animals. Such verified QTL may be directly exploited in marker-assisted selection (MAS) programs in commercial populations and their molecular basis may be revealed by positional candidate cloning.     

Mapping quantitative trait loci for cytokines in the pig

Increased disease resistance through improved general immune capacity would be beneficial for the welfare and productivity of farm animals. Cytokines are essential diagnostic parameters in veterinary practice. To identify quantitative trait loci (QTL) for cytokine levels in serum in the pig, Interferon‐gamma (IFN‐γ) and Interleukin 10 (IL‐10) levels and the ratio of IFN‐γ to IL‐10 were measured in a composite pig population, before and after challenge with modified live CSF (classical swine fever) vaccine. Through interval mapping using the variance component approach and the permutation test, 11 QTL (five for IFN‐γ, two for IL‐10 and four for the ratio of IFN‐γ to IL‐10) with significance levels of P < 0.10 were identified, of which five were significant at the P < 0.05 level. The most significant QTL (P < 0.01) was found on chromosome 16, with effect on the ratio of IFN‐γ to IL‐10. Within these QTL regions, a number of known genes were revealed and their potential relationships to the studied traits were discussed. Some of these genes may serve as candidate genes for these traits in swine.     

Genetic mapping of quantitative trait loci for meat quality and muscle metabolic traits in cattle

A whole‐genome scan was carried out in New Zealand and Australia to detect quantitative trait loci (QTL) for live animal and carcass composition traits and meat quality attributes in cattle. Backcross calves (385 heifers and 398 steers) were generated, with Jersey and Limousin backgrounds. The New Zealand cattle were reared and finished on pasture, whilst Australian cattle were reared on grass and finished on grain for at least 180 days. This paper reports on meat quality traits (tenderness measured as shear force at 4–5 ages on two muscles as well as associated traits of meat colour, pH and cooking loss) and a number of metabolic traits. For meat quality traits, 18 significant QTL (P < 0.05), located in nine linkage groups, were detected on a genome‐wise basis, in combined‐sire (seven QTL) or within‐sire analyses (11 QTL). For metabolic traits, 11 significant QTL (P < 0.05), located in eight linkage groups, were detected on a genome‐wise basis, in combined‐sire (five QTL) or within‐sire analyses (six QTL). BTA2 and BTA3 had QTL for both metabolic traits and meat quality traits. Six significant QTL for meat quality and metabolic traits were found at the proximal end of chromosome 2. BTA2 and BTA29 were the most common chromosomes harbouring QTL for meat quality traits; QTL for improved tenderness were associated with Limousin‐derived and Jersey‐derived alleles on these two chromosomes, respectively.     

Mapping quantitative trait loci for quality factors in an inter-class cross of US and Chinese wheat

Wheat quality factors are critical in determining the suitability of wheat (Triticum aestivum L.) for end-use product and economic value, and they are prime targets for marker-assisted selection. Objectives of this study were to identify quantitative trait loci (QTLs) that ultimately influence wheat market class and milling quality. A population of 132 F₁₂ recombinant inbred lines (RILs) was derived by single-seed descent from a cross between the Chinese hard wheat line Ning7840 and the soft wheat cultivar Clark and grown at three Oklahoma locations from 2001 to 2003. Milling factors such as test weight (volumetric grain weight, TW), kernel weight (KW), and kernel diameter (KD) and market class factors such as wheat grain protein content (GPC) and kernel hardness index (HI) were characterized on the basis of a genetic map constructed from 367 SSR and 241 AFLP markers covering all 21 chromosomes. Composite interval mapping identified eight QTLs for TW, seven for KW, six for KD, two each for GPC and HI measured by near-infrared reflectance (NIR) spectroscopy, and four for HI measured by single kernel characterization system. Positive phenotypic correlations were found among milling factors. Consistent co-localized QTLs were identified for TW, KW, and KD on the short arms of chromosomes 5A and 6A. A common QTL was identified for TW and KD on the long arm of chromosome 5A. A consistent major QTL for HI peaked at the Pinb-D1 locus on the short arm of chromosome 5D and explained up to 85% of the phenotypic variation for hardness. We identified QTLs for GPC on 4B and the short arm of 3A chromosomes. The consistency of quality factor QTLs across environments reveals their potential for marker-assisted selection.     

Detection of multiple quantitative trait loci and their pleiotropic effects in outbred pig populations

Background

Simultaneous detection of multiple QTLs (quantitative trait loci) may allow more accurate estimation of genetic effects. We have analyzed outbred commercial pig populations with different single and multiple models to clarify their genetic properties and in addition, we have investigated pleiotropy among growth and obesity traits based on allelic correlation within a gamete.

Methods

Three closed populations, (A) 427 individuals from a Yorkshire and Large White synthetic breed, (B) 547 Large White individuals and (C) 531 Large White individuals, were analyzed using a variance component method with one-QTL and two-QTL models. Six markers on chromosome 4 and five to seven markers on chromosome 7 were used.

Results

Population A displayed a high test statistic for the fat trait when applying the two-QTL model with two positions on two chromosomes. The estimated heritabilities for polygenic effects and for the first and second QTL were 19%, 17% and 21%, respectively. The high correlation of the estimated allelic effect on the same gamete and QTL test statistics suggested that the two separate QTL which were detected on different chromosomes both have pleiotropic effects on the two fat traits. Analysis of population B using the one-QTL model for three fat traits found a similar peak position on chromosome 7. Allelic effects of three fat traits from the same gamete were highly correlated suggesting the presence of a pleiotropic QTL. In population C, three growth traits also displayed similar peak positions on chromosome 7 and allelic effects from the same gamete were correlated.

Conclusion

Detection of the second QTL in a model reduced the polygenic heritability and should improve accuracy of estimated heritabilities for both QTLs.     

Detection of quantitative trait loci for growth and fatness in pigs

A quantitative trait locus (QTL) analysis of growth and fatness data from a three-generation experimental cross between Meishan (MS) and Large White (LW) pig breeds is presented. Six boars and 23 F1 sows, the progeny of six LW boars and six MS sows, produced 530 F2 males and 573 F2 females. Nine growth traits, i.e. body weight at birth and at 3, 10, 13, 17 and 22 weeks of age, average daily gain from birth to 3 weeks, from 3 to 10 weeks and from 10 to 22 weeks of age, as well as backfat thickness at 13, 17 and 22 weeks of age and at 40 and 60 kg live weight were analysed. Animals were typed for a total of 137 markers covering the entire porcine genome. Analyses were performed using two interval mapping methods: a line-cross (LC) regression method where founder lines were assumed to be fixed for different QTL alleles and a half-/full-sib (HFS) maximum likelihood method where allele substitution effects were estimated within each half-/full-sib family. Both methods revealed highly significant gene effects for growth on chromosomes 1, 4 and 7 and for backfat thickness on chromosomes 1, 4, 5, 7 and X, and significant gene effects on chromosome 6 for growth and backfat thickness. Suggestive QTLs were also revealed by both methods on chromosomes 2 and 3 for growth and 2 for backfat thickness. Significant gene effects were detected for growth on chromosomes 11, 13, 14, 16 and 18 and for backfat thickness on chromosome 8, 10, 13 and 14. LW alleles were associated with high growth rate and low backfat thickness, except for those of chromosome 7 and to a lesser extent early-growth alleles on chromosomes 1 and 2 and backfat thickness alleles on chromosome 6.     

Mapping liver fat female-dependent quantitative trait loci in collaborative cross mice

Non-alcoholic fatty liver disease (NAFLD) is the most common cause of chronic liver disease in the western world, with spectrum from simple steatosis to non-alcoholic steatohepatitis, which can progress to cirrhosis. NAFLD developments are known to be affected by host genetic background. Herein we emphasize the power of collaborative cross (CC) mouse for dissecting this complex trait and revealing quantitative trait loci (QTL) controlling hepatic fat accumulation in mice. 168 female and 338 male mice from 24 and 37 CC lines, respectively, of 18–20 weeks old, maintained on standard rodent diet, since weaning. Hepatic fat content was assessed, using dual DEXA scan in the liver. Using the available high-density genotype markers of the CC line, QTL mapping associated with percentage liver fat accumulation was performed. Our results revealed significant fatty liver accumulation QTL that were specifically, mapped in females. Two significant QTLs on chromosomes 17 and 18, with genomic intervals 3 and 2 Mb, respectively, were mapped. A third QTL, with a less significant P value, was mapped to chromosome 4, with genomic interval of 2 Mb. These QTLs were named Flal1–Flal3, referring to Fatty Liver Accumulation Locus 1–3, for the QTLs on chromosomes 17, 18, and 4, respectively. Unfortunately, no QTL was mapped with males. Searching the mouse genome database suggested several candidate genes involved in hepatic fat accumulation. Our results show that susceptibility to hepatic fat accumulations is a complex trait, controlled by multiple genetic factors in female mice, but not in male.     

Mapping quantitative trait loci with DNA microsatellites in a commercial dairy cattle population

Individual loci affecting economically important traits can be located using genetic linkage between quantitative trait loci and genetic markers. In the ‘granddaughter’ experimental design, heterozygous grandsires and their sons are genotyped for the genetic marker, while the quantitative trait records of the granddaughters are used for statistical analysis. Ten DNA microsatellite markers were used to look for associations with quantitative trait loci affecting milk production traits in seven Israeli Holstein grandsire families. At least 60% more grandsires were heterozygous, and 40% fewer individuals were discarded because of unknown paternal allele origin, as compared with diallelic markers. The effects of paternal alleles for locus D21S4 on kg milk and protein were significant (P < 0.025). The allele substitution effects for sire 783 were 283 kg milk and 5.7 kg protein. For both traits, progeny of sire 783 that inherited allele ‘18’ had higher evaluations than progeny that inherited allele ‘21’. These results were verified by genotyping 151 of his daughters. Thus, the rate of genetic gain for protein production can be increased by selecting progeny of sire 783 carrying allele ‘18’ at this locus.     

Detection of quantitative trait loci for androstenone, skatole and boar taint in a cross between Large White and Meishan pigs

'Boar taint' is a strong perspiration-like, urine-like unpleasant odour given off upon heating or cooking of meat from some intact (uncastrated) male pigs. Data from the F(2) generation of a Large White (LW) x Meishan (MS) crossbred population were analysed to detect quantitative trait loci (QTL) for traits associated with boar taint. Fat samples from 178 intact male pigs slaughtered at 85 +/- 5 kg were analysed for the major contributors to boar taint (androstenone, indole and skatole). Fat and lean samples from cooked meat were scored for boar, abnormal and pork flavour and odour by a trained sensory panel (SP). A scan with 117 markers covering the whole genome was performed in the F(2) individuals, together with their F(1) parents and purebred grandparents. At the 5% chromosomal significance threshold (approximately equal to the genome-wide suggestive significance threshold), QTL were detected for the laboratory estimate of androstenone on chromosomes 2, 4, 6, 7 and 9. However, only on chromosome 6 were there QTL for boar flavour (BF) traits in the same or adjacent marker intervals as a QTL for the laboratory estimate of androstenone. On chromosome 14, QTL were detected for the laboratory estimates of indole and skatole, the SP score for skatole and the scores for BF in lean and BF in fat. In all five cases, the MS allele generally increased the estimate or score, compared with the LW allele, but it appeared that desirable and undesirable alleles were present in both breeds. This locus on chromosome 14 has considerable potential for use to reduce the incidence of boar taint, especially if further research can identify the causative polymorphism or strongly associated markers.     

Healing quantitative trait loci in a combined cross analysis using related mouse strain crosses

Inbred mouse strains MRL and LG share the ability to fully heal ear hole punches with the full range of appropriate tissues without scarring. They also share a common ancestry, MRL being formed from a multi-strain cross with two final backcrosses to LG before being inbred by brother-sister mating. Many gene-mapping studies for healing ability have been performed using these two strains, resulting in the location of about 20 quantitative trait loci (QTLs). Here, we combine two of these crosses (N = 638), MRL/lpr × C57BL/6NTac and LG/J × SM/J, in a single combined cross analysis to increase the mapping power, decrease QTL support intervals, separate multiple QTLs and establish allelic states at individual QTL. The combined cross analysis located 11 QTLs, 6 affecting only one cross (5 LG × SM and 1 MRL × B6) and 5 affecting both crosses, approximately the number of common QTLs expected given strain SNP similarity. Amongst the five QTLs mapped in both crosses, three had significantly different genetic effects, additive in one cross and over or underdominant in the other. It is possible that allelic states at these three loci are different in SM and B6 because they lead to differences in dominance interactions with the LG and MRL alleles. QTL support intervals are 40% smaller in the combined cross analysis than in either of the single crosses. Combined cross analysis was successful in enhancing the interpretation of earlier QTL results for these strains.     

Quantitative trait loci analysis of egg and meat production traits in a red junglefowlxWhite Leghorn cross

Egg and production traits are of considerable economic importance in chickens. Using a White Leghorn x red junglefowl F(2) intercross, standard production measures of liver weight and colour, egg size, eggshell thickness, egg taste and meat quality were taken. A total of 160 markers covering 29 autosomes and the Z chromosome were genotyped on 175-243 individuals, depending on the trait under consideration. A total of nine significant quantitative trait loci (QTL) and three suggestive QTL were found on chicken chromosomes 1, 2, 4, 5, 7, 8, 10, 12, E47W24 and E22C19W28.     

A further look at quantitative trait loci affecting growth and fatness in a cross between Meishan and Large White pig populations

A detailed quantitative trait locus (QTL) analysis of growth and fatness data from a three generation experimental cross between Large White (LW) and Meishan (MS) pig breeds was carried out to search for sex × QTL interactions, imprinting effects and multiple linked QTLs. A total of 530 F₂ males and 573 F₂ females issued from 6 F₁ boars and 23 F₁ sows were typed for a total of 137 markers covering the entire porcine genome. Nine growth traits and three backfat thickness measurements were analysed. All analyses were performed using line cross regression procedures. A QTL with sex-specific expression was revealed in the proximal region of chromosome 8, although some confusion between herd and sex effects could not be discarded. This previously undetected QTL affected male growth during the fattening period, with a favourable additive effect of the LW allele. The analyses also revealed the presence of two linked QTLs segregating on chromosome 1, affecting growth traits during the post-weaning period. The first QTL, previously detected using a single QTL model, was located at the end of the q arm of chromosome 1 and had a favourable MS allele. The second QTL had a favourable LW allele and was located in the proximal extremity of the q arm of chromosome 1. Suggestive genomic imprinting was found in the distal region of chromosome 9 affecting growth during the fattening period.     

Detection of closely linked multiple quantitative trait loci using a genetic algorithm

The existence of a quantitative trait locus (QTL) is usually tested using the likelihood of the quantitative trait on the basis of phenotypic character data plus the recombination fraction between QTL and flanking markers. When doing this, the likelihood is calculated for all possible locations on the linkage map. When multiple QTL are suspected close by, it is impractical to calculate the likelihood for all possible combinations of numbers and locations of QTL. Here, we propose a genetic algorithm (GA) for the heuristic solution of this problem. GA can globally search the optimum by improving the "genotype" with alterations called "recombination" and "mutation." The "genotype" of our GA is the number and location of QTL. The "fitness" is a function based on the likelihood plus Akaike's information criterion (AIC), which helps avoid false-positive QTL. A simulation study comparing the new method with existing QTL mapping packages shows the advantage of the new GA. The GA reliably distinguishes multiple QTL located in a single marker interval.     

Novel genetic selection system for quantitative trait loci of quality protein maize

Quality protein maize combines a high-lysine trait with kernel hardness, for which a new, simpler genetic selection was designed.     

Genetic mapping of quantitative trait loci affecting carcass and meat quality traits in Beijing ducks (Anas platyrhynchos)

Quantitative trait loci (QTL) for carcass and meat quality traits were detected in a sample of 224 progeny from four males in line VI and 12 females in line V of Beijing ducks. These lines were selected for high body weight at 42 days of age (line VI) or high egg production at 360 days of age (line V). Traits were weights of the carcass, head, neck, shanks, wings, legs, thighs, breast, heart, liver, crop, gizzard, abdominal fat (AFW) and skin fat, as well as fat thickness in the tail, and pH value, shear force, drip loss (DL) (%) and cooking loss (CL) (%) of the breast. Using a half-sib analysis with a multiple QTL model, linkage between the carcass and meat quality traits and 95 microsatellite markers was investigated. Eight genome-wide significant QTL for weight of crop, skin fat, liver, neck, shanks, wings, DL were detected on linkage groups CAU4 and CAU6. One genome-wide suggestive QTL and one chromosome-wide significant QTL for weight of breast were found on CAU1 and CAU4 respectively. Fifteen chromosome-wide suggestive QTL influencing weight of AFW, breast, crop, heart, carcass, thighs, liver, shanks, gizzard, fat thickness in tail, DL (%) and CL (%) were mapped on CAU2, CAU4, CAU5, CAU6, CAU7, CAU10 and CAU13. In addition, two linked QTL for weight of liver and DL (%) were located on CAU2 and CAU7 respectively. The detection of QTL in ducks is a step towards identification of genes influencing these traits and their use for genetic improvement in this species.     

Mapping quantitative trait loci controlling silking date in a diallel cross among four lines of maize

 We describe and apply an interval mapping method for quantitative trait locus (QTL) detection using F₃ and testcross progenies derived from F₂ populations obtained from a diallel cross among four elite lines of maize. Linear model-based procedures were used for the test and estimation of putative QTL effects together with genetic interactions including epistasis. We mapped QTL associated with silking date and explored their genetic effects. Ten QTL were detected, and these explained more than 40% of the phenotypic variance. Most of these QTL had consistent and stable effects among genetic backgrounds and did not show significant epistasis. QTL-by-environment interaction was important for four QTL and was essentially due to changes in magnitude of allelic effects. These results show the efficiency of our method in several genetic situations as well as the power of the diallel design in detecting QTL simultaneously over several populations. Received: 2 September 1996 / Accepted: 20 December 1996     

Bayesian LASSO for quantitative trait loci mapping

The mapping of quantitative trait loci (QTL) is to identify molecular markers or genomic loci that influence the variation of complex traits. The problem is complicated by the facts that QTL data usually contain a large number of markers across the entire genome and most of them have little or no effect on the phenotype. In this article, we propose several Bayesian hierarchical models for mapping multiple QTL that simultaneously fit and estimate all possible genetic effects associated with all markers. The proposed models use prior distributions for the genetic effects that are scale mixtures of normal distributions with mean zero and variances distributed to give each effect a high probability of being near zero. We consider two types of priors for the variances, exponential and scaled inverse-chi(2) distributions, which result in a Bayesian version of the popular least absolute shrinkage and selection operator (LASSO) model and the well-known Student's t model, respectively. Unlike most applications where fixed values are preset for hyperparameters in the priors, we treat all hyperparameters as unknowns and estimate them along with other parameters. Markov chain Monte Carlo (MCMC) algorithms are developed to simulate the parameters from the posteriors. The methods are illustrated using well-known barley data.     

Detection of quantitative trait loci for body weights and conformation traits in Beijing ducks

Quantitative trait loci (QTL) for body weights and conformation traits were detected in Beijing ducks. Traits included body weights (BW) at hatching and at 1-7 weeks of age; lengths of the body (BL), keel bone (KBL), shank (SL) and neck (NL) at 7 weeks of age; width of breast (BTW) at 7 weeks; and girths of shank (SG) and breast (BG) at 7 weeks. Using a half-sib analysis with a multiple-QTL model, linkage between the phenotypic traits and 95 microsatellite markers was studied. Six genome-wide suggestive QTL for three body weights and two conformation traits were identified in CAU1, CAU2, CAU6 and CAU12. Chromosome-wide significant QTL influencing one body weight trait and one conformation trait were located in CAU4 and CAU10 respectively. Twelve chromosome-wide suggestive QTL for six body weight traits and four conformation traits were found in seven linkage groups (CAU1, CAU2, CAU3, CAU4, CAU6, CAU10 and CAU12). In addition, the QTL in CAU6 at 21 and 73 cM jointly affected SG and explained 10.6% of the phenotypic variation. This study provides the first evidence for QTL involved in body weights and conformation traits in ducks, and will stimulate further investigations into the genetic architecture of these traits in this species.