Cross‐platform compatibility of de novo‐aligned SNPs in a nonmodel butterfly genus

High‐throughput sequencing methods for genotyping genome‐wide markers are being rapidly adopted for phylogenetics of nonmodel organisms in conservation and biodiversity studies. However, the reproducibility of SNP genotyping and degree of marker overlap or compatibility between datasets from different methodologies have not been tested in nonmodel systems. Using double‐digest restriction site‐associated DNA sequencing, we sequenced a common set of 22 specimens from the butterfly genus Speyeria on two different Illumina platforms, using two variations of library preparation. We then used a de novo approach to bioinformatic locus assembly and SNP discovery for subsequent phylogenetic analyses. We found a high rate of locus recovery despite differences in library preparation and sequencing platforms, as well as overall high levels of data compatibility after data processing and filtering. These results provide the first application of NGS methods for phylogenetic reconstruction in Speyeria and support the use and long‐term viability of SNP genotyping applications in nonmodel systems.     

SNP development from RNA‐seq data in a nonmodel fish: how many individuals are needed for accurate allele frequency prediction?

Single nucleotide polymorphisms (SNPs) are rapidly becoming the marker of choice in population genetics due to a variety of advantages relative to other markers, including higher genomic density, data quality, reproducibility and genotyping efficiency, as well as ease of portability between laboratories. Advances in sequencing technology and methodologies to reduce genomic representation have made the isolation of SNPs feasible for nonmodel organisms. RNA‐seq is one such technique for the discovery of SNPs and development of markers for large‐scale genotyping. Here, we report the development of 192 validated SNP markers for parentage analysis in Tripterygion delaisi (the black‐faced blenny), a small rocky‐shore fish from the Mediterranean Sea. RNA‐seq data for 15 individual samples were used for SNP discovery by applying a series of selection criteria. Genotypes were then collected from 1599 individuals from the same population with the resulting loci. Differences in heterozygosity and allele frequencies were found between the two data sets. Heterozygosity was lower, on average, in the population sample, and the mean difference between the frequencies of particular alleles in the two data sets was 0.135 ± 0.100. We used bootstrap resampling of the sequence data to predict appropriate sample sizes for SNP discovery. As cDNA library production is time‐consuming and expensive, we suggest that using seven individuals for RNA sequencing reduces the probability of discarding highly informative SNP loci, due to lack of observed polymorphism, whereas use of more than 12 samples does not considerably improve prediction of true allele frequencies.     

Minimum sample sizes for population genomics: an empirical study from an Amazonian plant species

High‐throughput DNA sequencing facilitates the analysis of large portions of the genome in nonmodel organisms, ensuring high accuracy of population genetic parameters. However, empirical studies evaluating the appropriate sample size for these kinds of studies are still scarce. In this study, we use double‐digest restriction‐associated DNA sequencing (ddRADseq) to recover thousands of single nucleotide polymorphisms (SNPs) for two physically isolated populations of Amphirrhox longifolia (Violaceae), a nonmodel plant species for which no reference genome is available. We used resampling techniques to construct simulated populations with a random subset of individuals and SNPs to determine how many individuals and biallelic markers should be sampled for accurate estimates of intra‐ and interpopulation genetic diversity. We identified 3646 and 4900 polymorphic SNPs for the two populations of A. longifolia, respectively. Our simulations show that, overall, a sample size greater than eight individuals has little impact on estimates of genetic diversity within A. longifolia populations, when 1000 SNPs or higher are used. Our results also show that even at a very small sample size (i.e. two individuals), accurate estimates of F_ST can be obtained with a large number of SNPs (≥1500). These results highlight the potential of high‐throughput genomic sequencing approaches to address questions related to evolutionary biology in nonmodel organisms. Furthermore, our findings also provide insights into the optimization of sampling strategies in the era of population genomics.     

Mass production of SNP markers in a nonmodel passerine bird through RAD sequencing and contig mapping to the zebra finch genome

Here, we present an adaptation of restriction‐site‐associated DNA sequencing (RAD‐seq) to the Illumina HiSeq2000 technology that we used to produce SNP markers in very large quantities at low cost per unit in the Réunion grey white‐eye (Zosterops borbonicus), a nonmodel passerine bird species with no reference genome. We sequenced a set of six pools of 18–25 individuals using a single sequencing lane. This allowed us to build around 600 000 contigs, among which at least 386 000 could be mapped to the zebra finch (Taeniopygia guttata) genome. This yielded more than 80 000 SNPs that could be mapped unambiguously and are evenly distributed across the genome. Thus, our approach provides a good illustration of the high potential of paired‐end RAD sequencing of pooled DNA samples combined with comparative assembly to the zebra finch genome to build large contigs and characterize vast numbers of informative SNPs in nonmodel passerine bird species in a very efficient and cost‐effective way.     

Population structure of Atlantic mackerel inferred from RAD‐seq‐derived SNP markers: effects of sequence clustering parameters and hierarchical SNP selection

Restriction‐site‐associated DNA sequencing (RAD‐seq) and related methods are revolutionizing the field of population genomics in nonmodel organisms as they allow generating an unprecedented number of single nucleotide polymorphisms (SNPs) even when no genomic information is available. Yet, RAD‐seq data analyses rely on assumptions on nature and number of nucleotide variants present in a single locus, the choice of which may lead to an under‐ or overestimated number of SNPs and/or to incorrectly called genotypes. Using the Atlantic mackerel (Scomber scombrus L.) and a close relative, the Atlantic chub mackerel (Scomber colias), as case study, here we explore the sensitivity of population structure inferences to two crucial aspects in RAD‐seq data analysis: the maximum number of mismatches allowed to merge reads into a locus and the relatedness of the individuals used for genotype calling and SNP selection. Our study resolves the population structure of the Atlantic mackerel, but, most importantly, provides insights into the effects of alternative RAD‐seq data analysis strategies on population structure inferences that are directly applicable to other species.     

A simple route to single-nucleotide polymorphisms in a nonmodel species: identification and characterization of SNPs in the Artic ringed seal (Pusa hispida hispida)

Although single-nucleotide polymorphisms (SNPs) have become the marker of choice in the field of human genetics, these markers are only slowly emerging in ecological, evolutionary and conservation genetic analyses of nonmodel species. This is partly because of difficulties associated with the discovery and characterization of SNP markers. Herein, we adopted a simple straightforward approach to identifying SNPs, based on screening of a random genomic library. In total, we identified 768 SNPs in the ringed seal, Pusa hispida hispida, in samples from Greenland and Svalbard. Using three seal samples, SNPs were discovered at a rate of one SNP per 402 bp, whereas re-sequencing of 96 seals increased the density to one SNP per 29 bp. Although applicable to any species of interest, the approach is especially well suited for SNP discovery in nonmodel organisms and is easily implemented in any standard genetics laboratory, circumventing the need for prior genomic data and use of next-generation sequencing facilities.     

Restriction site associated DNA (RAD) for de novo sequencing and marker discovery in sugarcane borer,Diatraea saccharalis Fab. (Lepidoptera: Crambidae)

We present the development of a genomic library using RADseq (restriction site associated DNA sequencing) protocol for marker discovery that can be applied on evolutionary studies of the sugarcane borer Diatraea saccharalis, an important South American insect pest. A RADtag protocol combined with Illumina paired‐end sequencing allowed de novo discovery of 12 811 SNPs and a high‐quality assembly of 122.8M paired‐end reads from six individuals, representing 40 Gb of sequencing data. Approximately 1.7 Mb of the sugarcane borer genome distributed over 5289 minicontigs were obtained upon assembly of second reads from first reads RADtag loci where at least one SNP was discovered and genotyped. Minicontig lengths ranged from 200 to 611 bp and were used for functional annotation and microsatellite discovery. These markers will be used in future studies to understand gene flow and adaptation to host plants and control tactics.     

Development of SNP‐genotyping arrays in two shellfish species

Use of SNPs has been favoured due to their abundance in plant and animal genomes, accompanied by the falling cost and rising throughput capacity for detection and genotyping. Here, we present in vitro (obtained from targeted sequencing) and in silico discovery of SNPs, and the design of medium‐throughput genotyping arrays for two oyster species, the Pacific oyster, Crassostrea gigas, and European flat oyster, Ostrea edulis. Two sets of 384 SNP markers were designed for two Illumina GoldenGate arrays and genotyped on more than 1000 samples for each species. In each case, oyster samples were obtained from wild and selected populations and from three‐generation families segregating for traits of interest in aquaculture. The rate of successfully genotyped polymorphic SNPs was about 60% for each species. Effects of SNP origin and quality on genotyping success (Illumina functionality Score) were analysed and compared with other model and nonmodel species. Furthermore, a simulation was made based on a subset of the C. gigas SNP array with a minor allele frequency of 0.3 and typical crosses used in shellfish hatcheries. This simulation indicated that at least 150 markers were needed to perform an accurate parental assignment. Such panels might provide valuable tools to improve our understanding of the connectivity between wild (and selected) populations and could contribute to future selective breeding programmes.     

Next-generation RAD sequencing identifies thousands of SNPs for assessing hybridization between rainbow and westslope cutthroat trout

The increased numbers of genetic markers produced by genomic techniques have the potential to both identify hybrid individuals and localize chromosomal regions responding to selection and contributing to introgression. We used restriction-site-associated DNA sequencing to identify a dense set of candidate SNP loci with fixed allelic differences between introduced rainbow trout (Oncorhynchus mykiss) and native westslope cutthroat trout (Oncorhynchus clarkii lewisi). We distinguished candidate SNPs from homeologs (paralogs resulting from whole-genome duplication) by detecting excessively high observed heterozygosity and deviations from Hardy-Weinberg proportions. We identified 2923 candidate species-specific SNPs from a single Illumina sequencing lane containing 24 barcode-labelled individuals. Published sequence data and ongoing genome sequencing of rainbow trout will allow physical mapping of SNP loci for genome-wide scans and will also provide flanking sequence for design of qPCR-based TaqMan(?) assays for high-throughput, low-cost hybrid identification using a subset of 50-100 loci. This study demonstrates that it is now feasible to identify thousands of informative SNPs in nonmodel species quickly and at reasonable cost, even if no prior genomic information is available.     

SNP discovery using Paired‐End RAD‐tag sequencing on pooled genomic DNA of Sisymbrium austriacum (Brassicaceae)

Single nucleotide polymorphisms SNPs are rapidly replacing anonymous markers in population genomic studies, but their use in non model organisms is hampered by the scarcity of cost‐effective approaches to uncover genome‐wide variation in a comprehensive subset of individuals. The screening of one or only a few individuals induces ascertainment bias. To discover SNPs for a population genomic study of the Pyrenean rocket (Sisymbrium austriacum subsp. chrysanthum), we undertook a pooled RAD‐PE (Restriction site Associated DNA Paired‐End sequencing) approach. RAD tags were generated from the PstI‐digested pooled genomic DNA of 12 individuals sampled across the species distribution range and paired‐end sequenced using Illumina technology to produce ~24.5 Mb of sequences, covering ~7% of the specie's genome. Sequences were assembled into ~76 000 contigs with a mean length of 323 bp (N₅₀ = 357 bp, sequencing depth = 24x). In all, >15 000 SNPs were called, of which 47% were annotated in putative genic regions based on homology with the Arabidopsis thaliana genome. Gene ontology (GO) slim categorization demonstrated that the identified SNPs covered extant genic variation well. The validation of 300 SNPs on a larger set of individuals using a KASPar assay underpinned the utility of pooled RAD‐PE as an inexpensive genome‐wide SNP discovery technique (success rate: 87%). In addition to SNPs, we discovered >600 putative SSR markers.     

Developing genomic resources in two Linum species via 454 pyrosequencing and genomic reduction

Recent advances in next-generation DNA sequencing (NGS) have enhanced the development of genomic resources such as contigs or single-nucleotide polymorphisms (SNPs) for evolutionary studies of a nonmodel species with a complex and unsequenced genome. This study presents an application of a NGS technique in combination with genomic reduction and advanced bioinformatics tools to identify contigs and SNPs from multiple samples of two Linum species. A full Roche 454 GS FLX run of 16 diverse Linum samples representing cultivated flax (Linum usitatissimum L.) and its wild progenitor (Linum bienne Mill.) generated approximately 1.6 million sequence reads with a total length of 498 Mbp. Application of the computational pipeline de novo identification of alleles identified 713 contigs and 1067 SNPs. A blast search revealed alignments of all 713 contigs with 491 existing Linum scaffolds and gene annotations associated with 512 contigs. Sanger sequencing confirmed 95% of 79 selected contigs and 94% of 272 SNPs and identified 211 new SNPs and 19 new indels. The scored 454 SNP data were highly imbalanced for assayed samples. These findings not only are useful for evolutionary studies of Linum species but also help to illustrate the utility of NGS technologies in SNP discovery for nonmodel organisms.     

Double‐digest RAD sequencing using Ion Proton semiconductor platform (ddRADseq‐ion) with nonmodel organisms

Research in evolutionary biology involving nonmodel organisms is rapidly shifting from using traditional molecular markers such as mtDNA and microsatellites to higher throughput SNP genotyping methodologies to address questions in population genetics, phylogenetics and genetic mapping. Restriction site associated DNA sequencing (RAD sequencing or RADseq) has become an established method for SNP genotyping on Illumina sequencing platforms. Here, we developed a protocol and adapters for double‐digest RAD sequencing for Ion Torrent (Life Technologies; Ion Proton, Ion PGM) semiconductor sequencing. We sequenced thirteen genomic libraries of three different nonmodel vertebrate species on Ion Proton with PI chips: Arctic charr Salvelinus alpinus, European whitefish Coregonus lavaretus and common lizard Zootoca vivipara. This resulted in ~962 million single‐end reads overall and a mean of ~74 million reads per library. We filtered the genomic data using Stacks, a bioinformatic tool to process RAD sequencing data. On average, we obtained ~11 000 polymorphic loci per library of 6–30 individuals. We validate our new method by technical and biological replication, by reconstructing phylogenetic relationships, and using a hybrid genetic cross to track genomic variants. Finally, we discuss the differences between using the different sequencing platforms in the context of RAD sequencing, assessing possible advantages and disadvantages. We show that our protocol can be used for Ion semiconductor sequencing platforms for the rapid and cost‐effective generation of variable and reproducible genetic markers.     

CropSNPdb: a database of SNP array data for Brassica crops and hexaploid bread wheat

Advances in sequencing technology have led to a rapid rise in the genomic data available for plants, driving new insights into the evolution, domestication and improvement of crops. Single nucleotide polymorphisms (SNPs) are a major component of crop genomic diversity, and are invaluable as genetic markers in research and breeding programs. High‐throughput SNP arrays, or ‘SNP chips’, can generate reproducible sets of informative SNP markers and have been broadly adopted. Although there are many public repositories for sequencing data, which are routinely uploaded, there are no formal repositories for crop SNP array data. To make SNP array data more easily accessible, we have developed CropSNPdb ( http://snpdb.appliedbioinformatics.com.au ), a database for SNP array data produced by the Illumina Infinium? hexaploid bread wheat (Triticum aestivum) 90K and Brassica 60K arrays. We currently host SNPs from datasets covering 526 Brassica lines and 309 bread wheat lines, and provide search, download and upload utilities for users. CropSNPdb provides a useful repository for these data, which can be applied for a range of genomics and molecular crop‐breeding activities.     

Using Mendelian Inheritance To Improve High-Throughput SNP Discovery

Restriction site-associated DNA sequencing or genotyping-by-sequencing (GBS) approaches allow for rapid and cost-effective discovery and genotyping of thousands of single-nucleotide polymorphisms (SNPs) in multiple individuals. However, rigorous quality control practices are needed to avoid high levels of error and bias with these reduced representation methods. We developed a formal statistical framework for filtering spurious loci, using Mendelian inheritance patterns in nuclear families, that accommodates variable-quality genotype calls and missing data—both rampant issues with GBS data—and for identifying sex-linked SNPs. Simulations predict excellent performance of both the Mendelian filter and the sex-linkage assignment under a variety of conditions. We further evaluate our method by applying it to real GBS data and validating a subset of high-quality SNPs. These results demonstrate that our metric of Mendelian inheritance is a powerful quality filter for GBS loci that is complementary to standard coverage and Hardy–Weinberg filters. The described method, implemented in the software MendelChecker, will improve quality control during SNP discovery in nonmodel as well as model organisms.     

Genomewide single nucleotide polymorphism discovery in Atlantic salmon (Salmo salar): validation in wild and farmed American and European populations

A considerable number of single nucleotide polymorphisms (SNPs) are required to elucidate genotype–phenotype associations and determine the molecular basis of important traits. In this work, we carried out de novo SNP discovery accounting for both genome duplication and genetic variation from American and European salmon populations. A total of 9 736 473 nonredundant SNPs were identified across a set of 20 fish by whole‐genome sequencing. After applying six bioinformatic filtering steps, 200 K SNPs were selected to develop an Affymetrix Axiom^® myDesign Custom Array. This array was used to genotype 480 fish representing wild and farmed salmon from Europe, North America and Chile. A total of 159 099 (79.6%) SNPs were validated as high quality based on clustering properties. A total of 151 509 validated SNPs showed a unique position in the genome. When comparing these SNPs against 238 572 markers currently available in two other Atlantic salmon arrays, only 4.6% of the SNP overlapped with the panel developed in this study. This novel high‐density SNP panel will be very useful for the dissection of economically and ecologically relevant traits, enhancing breeding programmes through genomic selection as well as supporting genetic studies in both wild and farmed populations of Atlantic salmon using high‐resolution genomewide information.     

Application of SNPs for population genetics of nonmodel organisms: new opportunities and challenges

Recent improvements in the speed, cost and accuracy of next generation sequencing are revolutionizing the discovery of single nucleotide polymorphisms (SNPs). SNPs are increasingly being used as an addition to the molecular ecology toolkit in nonmodel organisms, but their efficient use remains challenging. Here, we discuss common issues when employing SNP markers, including the high numbers of markers typically employed, the effects of ascertainment bias and the inclusion of nonneutral loci in a marker panel. We provide a critique of considerations specifically associated with the application and population genetic analysis of SNPs in nonmodel taxa, focusing specifically on some of the most commonly applied methods.     

Optimization of the genotyping‐by‐sequencing strategy for population genomic analysis in conifers

Flexibility and low cost make genotyping‐by‐sequencing (GBS) an ideal tool for population genomic studies of nonmodel species. However, to utilize the potential of the method fully, many parameters affecting library quality and single nucleotide polymorphism (SNP) discovery require optimization, especially for conifer genomes with a high repetitive DNA content. In this study, we explored strategies for effective GBS analysis in pine species. We constructed GBS libraries using HpaII, PstI and EcoRI‐MseI digestions with different multiplexing levels and examined the effect of restriction enzymes on library complexity and the impact of sequencing depth and size selection of restriction fragments on sequence coverage bias. We tested and compared UNEAK, Stacks and GATK pipelines for the GBS data, and then developed a reference‐free SNP calling strategy for haploid pine genomes. Our GBS procedure proved to be effective in SNP discovery, producing 7000–11 000 and 14 751 SNPs within and among three pine species, respectively, from a PstI library. This investigation provides guidance for the design and analysis of GBS experiments, particularly for organisms for which genomic information is lacking.