Potential of Live Spirulina platensis on Biosorption of Hexavalent Chromium and Its Conversion to Trivalent Chromium

Microalga biomass has been described worldwide according their capacity to realize biosorption of toxic metals. Chromium is one of the most toxic metals that could contaminate superficial and underground water. Considering the importance of Spirulina biomass in production of supplements for humans and for animal feed we assessed the biosorption of hexavalent chromium by living Spirulina platensis and its capacity to convert hexavalent chromium to trivalent chromium, less toxic, through its metabolism during growth. The active biomass was grown in Zarrouk medium diluted to 50% with distilled water, keeping the experiments under controlled conditions of aeration, temperature of 30°C and lighting of 1,800 lux. Hexavalent chromium was added using a potassium dichromate solution in fed-batch mode with the aim of evaluate the effect of several additions contaminant in the kinetic parameters of the culture. Cell growth was affected by the presence of chromium added at the beginning of cultures, and the best growth rates were obtained at lower metal concentrations in the medium. The biomass removed until 65.2% of hexavalent chromium added to the media, being 90.4% converted into trivalent chromium in the media and 9.6% retained in the biomass as trivalent chromium (0.931 mg.g^?1).     

Degradation of Chlorpyrifos by an alkaline phosphatase from the cyanobacterium <Emphasis Type="Italic">Spirulina platensis</Emphasis>

Spirulina is a photosynthetic, filamentous, spiral-shaped, multicellular, blue-green microalga. The two most important species are Spirulina maxima and Spirulina platensis. Spirulina is considered an excellent food, lacking toxicity and having corrective properties against viral attacks, anemia, tumor growth and malnutrition. We have observed that cultures of Spirulina platensis grow in media containing up to 80 ppm of the organophosphorous pesticide, Chlorpyrifos. It was found to be due to an alkaline phosphatase (ALP) activity that was detected in cell free extracts of Spirulina platensis. This activity was purified from the cell free extracts using ammonium sulphate precipitation and gel filtration and shown to belong to the class of EC 3.1.3.1 ALP. The purified enzyme degrades 100 ppm Chlorpyrifos to 20 ppm in 1 h transforming it into its primary metabolite 3, 5, 6-trichloro-2-pyridinol. This is the first report of degradation of Chlorpyrifos by Spirulina platensis whose enzymic mechanism has been clearly identified. These findings have immense potential for harnessing Spirulina platensis in bioremediation of polluted ecosystems.     

SCREENING OF PHOTOSYNTHETIC O2‐EVOLVING PROKARYOTES FOR AN INSULIN‐LIKE ANTIGEN1

Diabetes mellitus (DM), a metabolic disorder, is becoming a major health problem worldwide. Insulin is the single hope for management of type 1 diabetes, but it is not always available or suitable. For finding additional bioresources, the present study was performed. ELISA‐based preliminary screening of cyanobacterial biomass using antihuman insulin antibody have detected an insulin‐like antigen in Spirulina platensis S‐5, Spirulina NCCU‐482, and Spirulina NCCU‐483. Their similarity with insulin‐like antigen was further confirmed by electrophoretic mobility using bovine insulin as marker.     

Internally illuminated photobioreactor using a novel type of light-emitting diode (LED) bar for cultivation of <Emphasis Type="Italic">Arthrospira platensis</Emphasis>

The biochemical properties of Spirulina platensis in an internally illuminated photobioreactor (IlPBR) were investigated under different light-emitted diode (LED) wavelengths; blue (λ_max= 450 and 460 nm), green (λ_max= 525 nm), red (λ_max = 630 and 660 nm), and white (6,500K), with various light intensities (200, 500, 1,000, and 2,000 μmol/m²/sec) were examined. The highest specific growth rate, maximum biomass, and phycocyanin productivity occurred under the red LEDs (0.39/day, 0.10 g/L/day, and 0.14 g/g-cell/day, respectively) at 1,000 μmol/m²/sec; the lowest growth rate was obtained under blue LEDs. Indeed, the size of trichomes was changed into short form under blue LEDs at all light intensities or all LEDs at 2,000 μmol/m²/sec for the first 2 days after inoculation, and S. platensis did not grow in the IlPBR under the dark condition. These results provide a base for different approaches for designing the pilot scale photobioreactor and developing cost-effective light sources.     

Heterotrophic production of Chlorella sp. TISTR 8990—biomass growth and composition under various production conditions

The green microalga Chlorella sp. TISTR 8990 was grown heterotrophically in the dark using various concentrations of a basal glucose medium with a carbon‐to‐nitrogen mass ratio of 29:1. The final biomass concentration and the rate of growth were highest in the fivefold concentrated basal glucose medium (25 g L^?1 glucose, 2.5 g L^?1 KNO₃) in batch operations. Improving oxygen transfer in the culture by increasing the agitation rate and decreasing the culture volume in 500‐mL shake flasks improved growth and glucose utilization. A maximum biomass concentration of nearly 12 g L^?1 was obtained within 4 days at 300 rpm, 30°C, with a glucose utilization of nearly 76% in batch culture. The total fatty acid (TFA) content of the biomass and the TFA productivity were 102 mg g^?1 and 305 mg L^?1 day^?1, respectively. A repeated fed‐batch culture with four cycles of feeding with the fivefold concentrated medium in a 3‐L bioreactor was evaluated for biomass production. The total culture period was 11 days. A maximum biomass concentration of nearly 26 g L^?1 was obtained with a TFA productivity of 223 mg L^?1 day^?1. The final biomass contained (w/w) 13.5% lipids, 20.8% protein and 17.2% starch. Of the fatty acids produced, 52% (w/w) were saturated, 41% were monounsaturated and 7% were polyunsaturated (PUFA). A low content of PUFA in TFA feedstock is required for producing high quality biodiesel. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1589–1600, 2017     

Modelling of Spirulina platensis growth in fresh water using response surface methodology

The influence of nutrient addition on the growth rate of Spirulina platensis in the Mangueira Lagoon water was studied in order to investigate the feasibility of using this water for biomass production. The addition of urea and sodium bicarbonate was studied through surface response methodology, over concentration ranges from 0.0 to 0.01170 M, and 0.0–19.70 gl^–1 respectively. The growth of Spirulina platensis in Mangueira Lagoon water with no addition of nutrients was carried out and compared with the biomass growth after nutrient addition. The results indicated that the optimal level of nutrients was 0.00585 M urea and without the addition of sodium bicarbonate. The biomass concentration was 1.4 gl^–1 in 780 h of cultivation and the doubling time (t _d) was 3.85 days. In 300 h, the biomass concentration in the medium without nutrient addition was 0.9 gl^–1, with a doubling time of 3.80 days.     

Ferric chloride flocculation plus carbon adsorption allows to reuse spent culture medium of Arthrospira platensis

Arthrospira platensis cultivation produces a saline spent medium that must be treated to allow its reuse, thus saving water and avoiding environmental pollution. This study evaluates the association of flocculation followed by adsorption to treat the spent medium by applying different concentrations of granular activated carbon (GAC) and ferric chloride (F), and using different residence times (T). The simultaneous optimization of the independent variables GAC, F, and T was performed using both a 2³ central composite design and a response surface methodology. The cells cultivated in the medium obtained after the optimal conditions of treatment (GAC = 54.2 g L^?1, F = 10.0 mg L^?1, and T = 30.8 min) provided the highest maximum cell concentration, X_m = 3140 ± 77 mg L^?1 in 0.5 L Erlenmeyer flasks with the highest protein biomass content (44.9%). The treated medium in such conditions was also used in a 3.5 L tubular photobioreactor (PBR), reaching X_m = 4033 ± 110 mg L^?1 and biomass with high contents of both protein (47.3 ± 2.6%) and chlorophyll (9.7 ± 0.3 mg g dry cell^?1). Therefore, this study can contribute to diminishing costs of A. platensis production by reusing its culture medium and improving its biomass quality in PBRs.     

A comparison of the carotenoids of strains of Oscillatoria and Spirulina (Cyanobacteria)

The qualitative and quantitative carotenoid composition is reported for (i) a red and a green strain of Oscillatoria limnetica and a green strain of Spirulina platensis cultivated under identical conditions and (ii) a red and a green strain of Spirulina subsalsa grown under identical conditions. No correlation between colour and carotenoid content was obtained. However, differences in carotenoid composition within the Oscillatoria and Spirulina strains were observed. Both oscillol diglycoside ex Oscillatoria limnetica and myxol glycoside ex Spirulina platensis were mixed α-glycosides with chinovose-fucose present in ca 7:2 ratio. Analytical procedures are given. The chemosystematic implications for the current taxonomy of the genera Oscillatoria and Spirulina are discussed.     

Predictive modeling of biomass production by Spirulina platensis as function of nitrate and NaCl concentrations

Effects of nitrate (2.0, 2.5, and 3.0 g L^?1) and salt (0.5, 1.0, 1.5, 2.0 g L^?1) concentrations on biomass production by Spirulina platensis was examined in the Schlösser medium. The highest (p < 0.001) biomass yields and chlorophyll a content was observed at 2.5 g L^?1 nitrate and 1.5 g L^?1 NaCl as 3.495 g L^?1 and 29.92 mg L^?1, respectively. Increment rate of biomass production was especially found between 72 and 216 h. Modified Richards, Schnute, Logistic and Gompertz models was successfully predicted (r² > 0.96 and RSS ? 0.003) biomass production by S. platensis as function of nitrate and salt concentrations. Low residual sum of squares (RSS) and high regression coefficients (r²) indicated that used models were well fitted to the experiment data and it could be regarded as sufficient to describe biomass production of Spirulina sp. Biological variables i.e. production rate (μ) and lag time (λ) for S. platensis ranged 0.012–0.034 h^?1 and 2.43–5.85 h, respectively from biomass production were successfully predicted by modified Logistic model according to low RSS and F-testing value.     

The expression of the Cuphea palustris thioesterase CpFatB2 in Yarrowia lipolytica triggers oleic acid accumulation

The conversion of industrial by‐products into high‐value added compounds is a challenging issue. Crude glycerol, a by‐product of the biodiesel production chain, could represent an alternative carbon source for the cultivation of oleaginous yeasts. Here, we developed five minimal synthetic glycerol‐based media, with different C/N ratios, and we analyzed the production of biomass and fatty acids by Yarrowia lipolytica Po1g strain. We identified two media at the expense of which Y. lipolytica was able to accumulate ～5 g L^?1 of biomass and 0.8 g L^?1 of fatty acids (0.16 g of fatty acids per g of dry weight). These optimized media contained 0.5 g L^?1 of urea or ammonium sulfate and 20 g L^?1 of glycerol, and were devoid of yeast extract. Moreover, Y. lipolytica was engineered by inserting the FatB2 gene, coding for the CpFatB2 thioesterase from Cuphea palustris, in order to modify the fatty acid composition towards the accumulation of medium‐chain fatty acids. Contrary to the expected, the expression of the heterologous gene increased the production of oleic acid, and concomitantly decreased the level of saturated fatty acids. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 32:26–35, 2016     

Nutritional optimization of Arthrospira platensis for starch and Total carbohydrates production

Present study aims to optimize the production of starch and total carbohydrates from Arthrospira platensis. Growing concerns toward unprecedented environmental issues associated with plastic pollution has created a tremendous impetus to develop new biomaterials for the production of bioplastic. Starch-based biopolymers from algae serve as sustainable feedstock for thermoplastic starch production due to their abundant availability and low cost. A. platensis was cultivated in Zarrouk's medium at 32 ± 1°C and exposed to red light with a photoperiod of 12:12 hr light/dark. Growth kinetics studies showed that the maximum specific growth rate (μ_max) obtained was 0.059 day⁻¹ with the doubling time (t_d) of 11.748 days. Subsequently, Zarrouk's medium with different concentrations of sulfur, phosphorus and nitrogen was prepared to establish the nutrient-limiting conditions to enhance the accumulation of starch and total carbohydrates. In this study, the highest starch accumulated was 6.406 ± 0.622 mg L⁻¹ under optimized phosphorus limitation (0.025 g L⁻¹) conditions. Nitrogen limitation (0.250 g L⁻¹) results demonstrated significant influenced (p < 0.05) on total carbohydrates (67.573 ± 2.893 mg L⁻¹) accumulation in A. platensis. The starch accumulation in A. platensis was significantly affected (p < 0.05) by phosphorus limitation (0.0025 g L⁻¹). Subsequently, the optimized phosphorus concentration was coupled with mixotrophic cultivation to further enhance the starch accumulation. The results obtained indicated that, the starch (11.426 ± 0.314 mg L⁻¹) and carbohydrates (43.053 ± 2.986 mg L⁻¹) concentration obtained was significantly high (p < 0.05) under mixotrophic cultivation. Therefore, it shown that nutrient limitation and mixotrophic cultivation are viable strategies to enhance the accumulation of starch and total carbohydrates in A. platensis.     

Large-scale cultivation of Spirulina in a floating horizontal photobioreactor without aeration or an agitation device

A low-cost floating photobioreactor (PBR) without the use of aeration and/or an agitation device, in which carbon was supplied in the form of bicarbonate and only wave energy was utilized for mixing, was developed in our previous study. Scaling up is a common challenge in the practical application of PBRs and has not yet been demonstrated for this new design. To fill this gap, cultivation of Spirulina platensis was conducted in this study. The results demonstrated that S. platensis had the highest productivity at 0.3 mol L⁻¹ sodium bicarbonate, but the highest carbon utilization (104 ± 2.6%) was obtained at 0.1 mol L⁻¹. Culture of Spirulina aerated with pure oxygen resulted in only minor inhibition of growth, indicating that its productivity will not be significantly reduced even if dissolved oxygen is accumulated to a high level due to intermittent mixing resulting from the use of wave energy. In cultivation using a floating horizontal photobioreactor at the 1.0 m² scale, the highest biomass concentration of 2.24 ± 0.05 g L⁻¹ was obtained with a culture depth of 5.0 cm and the highest biomass productivity of 18.9 g m⁻² day⁻¹ was obtained with a depth of 10.0 cm. This PBR was scaled up to 10 m² (1000 L) with few challenges; biomass concentration and productivity during ocean testing were little different than those at the 1.0 m² (100 L) scale. However, the larger PBR had an apparent carbon utilization efficiency of 45.0 ± 2.8%, significantly higher than the 39.4 ± 0.9% obtained at the 1 m² scale. These results verified the ease of scaling up floating horizontal photobioreactors and showed their great potential in commercial applications.

     

Far‐red dependent changes in the chemical composition of Spirulina platensis

The influence of far‐red light (FRL) was studied on the chemical composition of Spirulina platensis biomass. The following light compositions were used during the culture white light, blue‐red LED light (BRL) and BRL supplemented with FRL (BRFRL). Chlorophyll and phenol contents were measured by spectrophotometric methods, whereas presence of carotenoids, lipids, and phycobiliproteins were estimated by Fourier‐transform Raman spectrometry. Additionally, phenol content was investigated by fluorescence intensity of algae culture in the range of 430–650 nm. The content of chlorophyll and phenols in algae cells depended on the spectral composition of light and was the highest under BRL (16.7 ± 0.5 and 9.1 ± 0.6, respectively). It was shown that there is a positive linear correlation (R = 0.902 at p < 0.0000001) between the ratio of relative fluorescence intensity of S. platensis suspensions at 450 nm to the suspensions at 540 nm (F450/F540) and the content of phenolic compounds in the biomass. Changes in the F450/F540 ratio can explain approximately 80% changes of phenol contents in algae cells. Spirulina platensis Raman spectra demonstrated that the biomass of algae growing under white light and BRL had a significantly higher intensity of phycobiliprotein bands than the algae growing under BRFRL.     

Arthrospira platensis biomass with high protein content cultivated in continuous process using urea as nitrogen source

Aims: Arthrospira platensis has been studied for single‐cell protein production because of its biomass composition and its ability of growing in alternative media. This work evaluated the effects of different dilution rates (D) and urea concentrations (N₀) on A. platensis continuous culture, in terms of growth, kinetic parameters, biomass composition and nitrogen removal. Methods and results: Arthrospira platensis was continuously cultivated in a glass‐made vertical column photobioreactor agitated with Rushton turbines. There were used different dilution rates (0·04–0·44 day^?1) and urea concentrations (0·5 and 5 mmol l^?1). With N₀ = 5 mmol l^?1, the maximum steady‐state biomass concentration was1415 mg l^?1, achieved with D = 0·04 day^?1, but the highest protein content (71·9%) was obtained by applying D = 0·12 day^?1, attaining a protein productivity of 106·41 mg l^?1 day^?1. Nitrogen removal reached 99% on steady‐state conditions. Conclusions: The best results were achieved by applying N₀ = 5 mmol l^?1; however, urea led to inhibitory conditions at D ≥ 0·16 day^?1, inducing the system wash‐out. The agitation afforded satisfactory mixture and did not harm the trichomes structure. Significance and Impact of the Study: These results can enhance the basis for the continuous removal of nitrogenous wastewater pollutants using cyanobacteria, with an easily assembled photobioreactor.     

Use of the effluent from biogas production for cultivation of Spirulina

The effluent from the biogas process was tested as a nutrient source during cultivation of the protein-rich and edible microalgae Spirulina (Arthrospira platensis) and compared with conventional Spirulina medium. Equal biomass production was observed until late exponential phase and no significant differences could be observed between the treatments in protein amount, amino acid composition, and total lipid concentration. The concentration of the pigment phycocyanin differed significantly between Spirulina medium and the effluent-based medium (63.3 ± 11.7 and 86.2 ± 1.9 mg g⁻¹, respectively). Slightly higher concentrations of saturated fatty acids, mainly palmitic acid, were observed in the biomass produced in Spirulina medium than in that produced in the effluent-based medium. In the biomass produced in the effluent-based medium, the cadmium concentration was 0.07 ± 0.05 mg kg⁻¹ of dry weight, whereas it was below the detection limit in the biomass produced in Spirulina medium. There is a need to identify new food and feed resources and a possible future scenario is to integrate Spirulina production into the biogas plant for protein production as it contains more than 60% of protein on dry weight basis. In that scenario, it is important to control heavy metal concentrations in the biogas slurry fed to Spirulina.

     

COMBINED EFFECTS OF ULTRAVIOLET RADIATION AND TEMPERATURE ON MORPHOLOGY,PHOTOSYNTHESIS, AND DNA OF ARTHROSPIRA (SPIRULINA) PLATENSIS (CYANOPHYTA)1

Natural levels of solar UVR were shown to break and alter the spiral structure of Arthrospira (Spirulina) platensis (Nordst.) Gomont during winter. However, this phenomenon was not observed during summer at temperatures of ～30°C. Since little has been documented on the interactive effects of solar UV radiation (UVR; 280–400 nm) and temperature on cyanobacteria, the morphology, photosynthesis, and DNA damage of A. platensis were examined using two radiation treatments (PAR [400–700 nm] and PAB [PAR + UV‐A + UV‐B: 280–700]), three temperatures (15, 22, and 30°C), and three biomass concentrations (100, 160, and 240 mg dwt [dry weight] · L^?1). UVR caused a breakage of the spiral structure at 15°C and 22°C, but not at 30°C. High PAR levels also induced a significant breakage at 15°C and 22°C, but only at low biomass densities, and to lesser extent when compared with the PAB treatment. A. platensis was able to alter its spiral structure by increasing helix tightness at the highest temperature tested. The photochemical efficiency was depressed to undetectable levels at 15°C but was relatively high at 30°C even under the treatment with UVR in 8 h. At 30°C, UVR led to 93%–97% less DNA damage when compared with 15°C after 8 h of exposure. UV‐absorbing compounds were determined as negligible at all light and temperature combinations. The possible mechanisms for the temperature‐dependent effects of UVR on this organism are discussed in this paper.     

Innovative development of membrane sparger for carbon dioxide supply in microalgae cultures

The present study was aimed to develop a membrane sparger (MS) integrated into a tubular photobioreactor to promote the increase of the carbon dioxide (CO₂) fixation by Spirulina sp. LEB 18 cultures. The use of MS for the CO₂ supply in Spirulina cultures resulted not only in the increase of DIC concentrations but also in the highest accumulated DIC concentration in the liquid medium (127.4 mg L⁻¹ d⁻¹). The highest values of biomass concentration (1.98 g L⁻¹), biomass productivity (131.8 mg L⁻¹ d⁻¹), carbon in biomass (47.9% w w⁻¹), CO₂ fixation rate (231.6 mg L⁻¹ d⁻¹), and CO₂ use efficiency (80.5% w w⁻¹) by Spirulina were verified with MS, compared to the culture with conventional sparger for CO₂ supply. Spirulina biomass in both culture conditions had high protein contents varying from 64.9 to 69% (w w⁻¹). MS can be considered an innovative system for the supply of carbon for the microalgae cultivation and biomass production. Moreover, the use of membrane system might contribute to increased process efficiency with a reduced cost of biomass production.     

MORPHOLOGICAL REVERSION OF SPIRULINA (ARTHROSPIRA) PLATENSIS (CYANOPHYTA): FROM LINEAR TO HELICAL1

The cyanobacterium Spirulina Turpin is characterized by its regularly coiled trichomes. Under some conditions, its helical filaments can convert to abnormal morphologies, such as irregularly curved and even linear shapes, that had been considered as a permanent degeneration that could not be reversed. However, here we found that the linear filaments of Spirulina platensis Geitler could spontaneously revert to the helical form with the same morphology as the original filaments. Further studies showed that the ultrastructural, physiological, and biochemical characteristics of linear filaments were different from those of the original filaments, whereas they were the same for the reverted and the original filaments. The SDS‐PAGE analysis revealed at least four proteins or subunits related to Spirulina morphogenesis: The 21.9‐kDa and the 20.3‐kDa proteins were highly expressed in the helical filaments, whereas the 52.0‐kDa and the 31.8‐kDa proteins were highly expressed in the linear filaments. The random amplified polymorphic DNA analysis with 96 random primers showed that the genetic background of the reverted filaments was the same as that of the original filaments but distinct from that of the linear filaments. The results indicated that linear filaments of Spirulina could revert to the original morphology under certain conditions, and their other distinctive traits were regained.     

Chlorella vulgaris as a lipid source: Cultivation on air and seawater‐simulating medium in a helicoidal photobioreactor

The freshwater microalga Chlorella vulgaris was cultured batchwise on the seawater‐simulating Schlösser medium either in a 1.1‐L‐working volume helicoidal photobioreactor (HeP) or Erlenmeyer flask (EF) as control and continuously supplying air as CO₂ source. In these systems, maximum biomass concentration reached 1.65 ± 0.17 g L^?1 and 1.25 ± 0.06 g L^?1, and maximum cell productivity 197.6 ± 20.4 mg L^?1 day^?1 and 160.8 ± 12.2 mg L^?1 day^?1, respectively. Compared to the Bold's Basal medium, commonly employed to cultivate this microorganism on a bench‐scale, the Schlösser medium ensured significant increases in all the growth parameters, namely maximum cell concentration (268% in EF and 126% in HeP), maximum biomass productivity (554% in EF and 72% in HeP), average specific growth rate (67% in EF and 42% in HeP), and maximum specific growth rate (233% in EF and 22% in HeP). The lipid fraction of biomass collected at the end of runs was analyzed in terms of both lipid content and fatty acid profile. It was found that the seawater‐simulating medium, despite of a 56–63% reduction of the overall biomass lipid content compared to the Bold's Basal one, led in HeP to significant increases in both the glycerides‐to‐total lipid ratio and polyunsaturated fatty acid content compared to the other conditions taken as an average. These results as a whole suggest that the HeP configuration could be a successful alternative to the present means to cultivate C. vulgaris as a lipid source. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:279–284, 2016     

Phylogenetic relatedness among Spirulina and related cyanobacterial genera

Molecular polymorphisms in a selected set of Spirulina and related genera using random primers based on repetitive sequences along with biochemical parameters, led to the unambiguous differentiation of the strains and understanding of their phylogenetic relationships. A combination of 10 sets of dual primers generated 100% distinct polymorphic bands ranging from 150 to 5,000 bp. Total number of fragments ranged from 68 to 159 whereas polymorphic bands ranged from 13 to 32 for different Random Amplified Polymorphic DNA (RAPD) reactions. Spirulina platensis strains, Sp-2 and Sp-3, possessed quite comparable chlorophyll and protein content besides having maximum similarity coefficient (0.88) between them on the basis of RAPD reactions, thus proved to be closely related. Sp-8 (Spirulina from Loktak Lake) having the highest protein content and protein: chlorophyll ratio, showed close similarity with the mutant of Spirulina platensis (Sp-7) on the basis of RAPD analysis. Duncan’s Multiple Range Test (DMRT) ranking for the biochemical parameters were quite closer for the strains of Spirulina and Arthrospira. This is also supported by the cluster analysis based on RAPD data, as the strains of Spirulina and Arthrospira are placed together in the same subcluster in the dendrogram. The comparative closeness among the strains of Lyngbya, Oscillatoria and Phormidium is reflected by the low content of protein and protein: chlorophyll ratio, which is also supported by the dendrogram based upon RAPD; thus, exhibiting the usefulness of multiplex RAPD along with biochemical parameters for the phylogenetic analysis of Spirulina and related genera.