Treatment of dye-rich wastewater by an immobilized thermophilic cyanobacterial strain: Phormidium sp.

The removal of Remazol Blue and Reactive Black B by the immobilized thermophilic cyanobacterial strain Phormidium sp. was investigated under thermophilic conditions in a batch system, in order to determine the optimal conditions required for the highest dye removal. In the experiments, performed at pH 8.5, with different initial dye concentrations between 9.1 mg l⁻¹ and 82.1 mg l⁻¹ and at 45 °C, calcium alginate immobilized Phormidium sp. showed high dye decolorization, with maximum uptake yields ranging from 50% to 88% at all dye concentrations tested. When the effects of high dye concentrations on dye removal were investigated, the highest uptake yield in the beads was 50.3% for 82.1 mg l⁻¹ Remazol Blue and 60.0% for 79.5 mg l⁻¹ Reactive Black B. The highest color removal was detected at 45 °C and 50 °C incubation temperatures for all dye concentrations. As the temperature decreased, the removal yield of immobilized Phormidium sp. also decreased. At about 75 mg l⁻¹ initial dye concentrations, the highest specific dye uptake measured was 41.29–41.17 mg g⁻¹ for Remazol Blue and 47.69–43.82 mg g⁻¹ for Reactive Black B at 45 °C and 50 °C incubation temperatures, respectively, after 8 days incubation.     

Isolation of hexavalent chromium resistant bacteria from industrial saline effluents and their ability of bioaccumulation

The mixed cultures has been isolated from industrial saline wastewater contaminated with chromium(VI), using enrichment in the presence of 50 mg l⁻¹ chromium(VI) and 4% (w/v) NaCl at pH 8. In this study, the molasses (M) medium was selected a suitable medium for the effective chromium bioaccumulation by the mixed cultures. Eleven pure isolates obtained from mixed cultures and some of them showed high bioaccumulation in the M media containing about 100 mg l⁻¹ chromium(VI) and 4% NaCl. The strain 8 (99.3%) and 10 (99.1%) were able to bioaccumulate more efficient than the mixed culture (98.9%) in this media. But the highest specific Cr uptake was obtained by the mixed cultures followed by strain 8 and 10 with 56.71, 33.14 and 21.7 mg g⁻¹, respectively. Bioaccumulation of chromium(VI) ions by the strain 8 growing in the media with chromium(VI) and NaCl was studied in a batch system as a function of initial chromium(VI) (86.6–547.6 mg l⁻¹) and NaCl (0, 2, 4, 6% w/v) concentrations. During all the experiments, the uptake yield of the strain 8 was highly affected from NaCl concentrations in the medium at high initial chromium(VI) concentrations. But at low chromium(VI) concentration, strain 8 was not affected from NaCl concentrations in the medium. The maximum uptake yield were obtained in the M media with 2% NaCl as 98.8% for 110.0 mg l⁻¹, 98.6% for 217.1 mg l⁻¹, 98.6% for 381.7 mg l⁻¹ and 98.2% for 547.6 mg l⁻¹ initial chromium(VI) concentrations. The strain 8 tolerated a 6% (w/v) NaCl concentration was able to bioaccumulate more than 95% of the applied chromium(VI) at the 97.6–224.4 mg l⁻¹ initial chromium(VI) concentrations. The results presented in this paper was shown that these pure and mixed cultures might be of use for the bioaccumulation of chromium(VI) from saline wastewater.     

Chromate reduction by resting cells of Achromobacter sp. Ch-1 under aerobic conditions

Chromate reduction was carried out by resting cells of Achromobacter sp. Ch-1 with lactate as electron donor under aerobic conditions. The reduction activity of the samples supplemented with lactate was two times as those without lactate. The reduction rate was influenced by initial pH and lactate concentration. Under the optimal conditions, pH 9.0 and 4000 mg l⁻¹ lactate supplement, reduction rate was 5.45 mg l⁻¹ min⁻¹. The reduction rate decreased with increasing of Cr(VI) concentrations and increased with cell densities proportionally. The maximum reduction limit of Ch-1 cells was obtained at 2107 mg l⁻¹ of Cr(VI).     

Bioavailability and extraction of heavy metals from contaminated soil by Atriplex halimus

Pot experiments were performed to evaluate the phytoremediation capacity of plants of Atriplex halimus grown in contaminated mine soils and to investigate the effects of organic amendments on the metal bioavailability and uptake of these metals by plants. Soil samples collected from abandoned mine sites north of Madrid (Spain) were mixed with 0, 30 and 60 Mg ha⁻¹ of two organic amendments, with different pH and nutrients content: pine-bark compost and horse- and sheep-manure compost. The increasing soil organic matter content and pH by the application of manure amendment reduced metal bioavailability in soil stabilising them. The proportion of Cu in the most bioavailable fractions (sum of the water-soluble, exchangeable, acid-soluble and Fe–Mn oxides fractions) decreased with the addition of 60 Mg ha⁻¹ of manure from 62% to 52% in one of the soils studied and from 50% to 30% in the other. This amendment also reduced Zn proportion in water-soluble and exchangeable fractions from 17% to 13% in one of the soils. Manure decreased metal concentrations in shoots of A. halimus, from 97 to 35 mg kg⁻¹ of Cu, from 211 to 98 mg kg⁻¹ of Zn and from 1.4 to 0.6 mg kg⁻¹ of Cd. In these treatments there was a higher plant growth due to the lower metal toxicity and the improvement of nutrients content in soil. This higher growth resulted in a higher total metal accumulation in plant biomass and therefore in a greater amount of metals removed from soil, so manure could be useful for phytoextraction purposes. This amendment increased metal accumulation in shoots from 37 to 138 mg pot⁻¹ of Cu, from 299 to 445 mg pot⁻¹ of Zn and from 1.8 to 3.7 mg pot⁻¹ of Cd. Pine bark amendment did not significantly alter metal availability and its uptake by plants. Plants of A. halimus managed to reduce total Zn concentration in one of the soils from 146 to 130 mg kg⁻¹, but its phytoextraction capacity was insufficient to remediate contaminated soils in the short-to-medium term. However, A. halimus could be, in combination with manure amendment, appropriate for the phytostabilization of metals in mine soils.     

Multiple regeneration pathways in Spathoglottis plicata Blume — A study in vitro

Asymbiotic germination of immature seeds (embryos), and mature seeds and micropropagation of Spathoglottis plicata were described. Effects of three nutrition media namely, Murashige & Skoog (MS); Phytamax (PM); and Phyto-Technology orchid seed sowing medium (P₇₂₃), two carbon sources such as glucose and sucrose at 2–3% (w/v), two plant growth regulators such as 6-benzylaminopurine (BAP; 0.5–3.0 mg l^− 1) and α-naphthalene acetic acid (NAA; 0.5–2.0 mg l^− 1) and peptone (2.0 g l^− 1) were examined on seed germination, early protocorm development and micropropagation. The maximum germination of mature seeds (95%) was recorded in PM medium supplemented with 2% (w/v) sucrose + 2.0 g l^− 1 peptone. For germination of embryos P₇₂₃ medium supplemented with 1.0 mg l^− 1 BAP proved best. Multiple shoot buds or protocorm-like bodies (PLBs) were produced from stem segments of in vitro raised seedlings. Both direct organogenesis and embryogenesis were observed and the morphogenetic response was initiated by different concentrations and combinations of PGRs. The optimum PGR combination for maximal PLB regeneration was 1.0 mg l^− 1 NAA + 2.5 mg l^− 1 BAP, while 1.0 mg l^− 1 NAA + 1.0 mg l^− 1 BAP for shoot bud development. Strong and stout root system was induced in half strength PM medium supplemented with 0.5 mg l^− 1 IAA. The well-rooted plantlets were transferred to pots containing a potting mixture composed of saw dust, coconut coir, humus, and coal pieces at 1:1:1:2 (w/w) with 80% survival in outside environment and flowered after two years of transfer.     

Naphthalene and biphenyl oxidation by two marine Pseudomonas strains isolated from Venice Lagoon sediment

A sediment sample from Venice Lagoon was found to be contaminated with 475 mg Kg⁻¹ polycyclic aromatic hydrocarbons (PAHs). Naphthalene was the principal pollutant at 26% of total PAHs. Two strains of Pseudomonas SN1 and SB1 were isolated from sediment amended with 2% naphthalene. 16S rRNA gene sequence analysis indicated that the two strains have about 99% nucleotide identity with strains of the genus Pseudomonas, and are very close to Pseudomonas stutzeri. Their metabolic profiles showed significant nutritional differences, the most significant of which was that SN1 grows in marine mineral medium spiked with naphthalene and SB1 grows with biphenyl as sole carbon and energy sources. Pseudomonas sp. SN1 had a doubling time of 3.1 h with 2% naphthalene and SB1 had a doubling time of 19.5 h with 2% biphenyl. Strain SN1 oxidised naphthalene at 564±32 mg O₂ l⁻¹ d⁻¹ and SB1 oxidised biphenyl at 426±25 mg O₂ l⁻¹ d⁻¹ in respirometry reaction vessels under controlled conditions. Screening of the two strains for dioxygenase genes involved in the first step of the two hydrocarbon degradation pathways, by polymerase chain reaction, showed naphthalene dioxygenase in SN1 and biphenyl dioxygenase in SB1. The strains each have a different catechol 2,3-dioxygenase responsible for cleavage of the aromatic ring.     

Mathematical analysis of trickling filter response to pentachlorophenol shock load

The response of a laboratory trickling filter to a step increase in pentachlorophenol (PCP) feed concentration was analyzed using continuous stirred tank (CSTR) and plug flow reactor (PFR) models. The CSTR model provided a slightly better fit to experimental data than the plug flow model when specific growth rate, μ, and PCP-degrading biomass concentration before the shock load, X₀, were variable parameters but was clearly superior when the mean residence time, τ, was added as a third parameter. The three-parameter CSTR model accurately represented six of seven concentration response curves corresponding to step increases in PCP feed concentration of 12–165 mg l⁻¹ and 20–150 mg l⁻¹. The continuing improvement in system response to repetitive 20–150 mg l⁻¹ shock loads was reflected by a monotonic increase in the optimal estimates of initial rate of biomass production.     

Protocorm culture of Dendrobium candidum in balloon type bubble bioreactors

Protocorm cultures of Dendrobium candidum were established in balloon type bubble bioreactors using Murashige and Skoog (MS) medium with 0.5 mg l⁻¹ α-naphthaleneacetic acid (NAA), 2.5% (w/v) sucrose, 5:25 mM NH₄:NO₃ and 1% (v/v) banana homogenate for the production of biomass and bioactive compounds. In 3 l bioreactor containing 2 l medium, a maximum protocorm biomass (21.0 g l⁻¹ dry biomass) and also optimum quantities of total polysaccharides (389.3 mg g⁻¹ DW), coumarins (18.0 mg g⁻¹ DW), polyphenolics (11.9 mg g⁻¹ DW), and flavonoids (4.5 mg g⁻¹ DW) were achieved after 7 weeks of culture. Based on these studies, 5 and 10 l bioreactor cultures were established to harvest 80 g and 160 g dry biomass. In 10 l bioreactors, the protocorms grown were accumulated with optimal levels of polysaccharides (424.1 mg g⁻¹ DW), coumarins (15.8 mg g⁻¹ DW), polyphenols (9.03 mg g⁻¹ DW) and flavonoids (4.7 mg g⁻¹ DW). The bioreactor technology developed here will be useful for the production of important bioactive compounds from D. candidum.     

Degradation of phenol by a halotolerant strain of Penicillium chrysogenum

The lowest 50% lethal (effective) concentration, L(E)C₅₀, of phenol in a battery of seven microbiotests with species representing different trophic levels was 1–10 mg l⁻¹, classifying it as “toxic”. A phenol-degrading microorganism was isolated from soil samples of the salt mine of Clona in Portugal, after enrichment in the presence of phenol and high salt concentration. Based on cultural and morphological characteristics, the strain CLONA2 was identified as belonging to Penicillium chrysogenum. It was found to be a halotolerant fungus able to grow in a nutrient-rich medium with 5.8% NaCl. It degraded at least 300 mg l⁻¹ phenol as sole source of carbon and energy, without accumulation of intermediates. The samples were also tested for toxicity using the Microtox^® assay. Data showed that P. chrysogenum CLONA2 could be effectively utilized to reduce phenol toxicity. The results suggest also that phenol under saline conditions can be successfully mineralized by P. chrysogenum CLONA2.     

Decolorization of azo dye by immobilized Pseudomonas luteola entrapped in alginate–silicate sol–gel beads

Pseudomonas luteola was immobilized by entrapment in alginate–silicate sol–gel beads for decolorization of the azo dye, Reactive Red 22. The influences of biomass loading and operating conditions on specific decolorization rate and dye removal efficiency were studied in details. The immobilized cells were found to be less sensitive to changes in agitation rates (dissolved oxygen levels) and pH values. Michaelis–Menten kinetics could be used to describe the decolorization kinetics with the kinetic parameters being 36.5 mg g⁻¹ h⁻¹, 300.1 mg l⁻¹ and 18.2 mg g⁻¹ h⁻¹, 449.8 mg l⁻¹ for free and immobilized cells, respectively. After five repeated batch cycles, the decolorization rate of the free cells decreased by nearly 54%, while immobilized cells still retained 82% of their original activity. The immobilized cells exhibited better thermal stability during storage and reaction when compared with free cells. From SEM observation, a dense silicate gel layer was found to surround the macroporous alginate–silicate core, which resulted in much improved mechanical stability over that of alginate beads when tested under shaking conditions. Alginate–silicate matrices appeared to be the best matrix for immobilization of P. luteola in decolorization of Reactive Red 22 when compared with previous results using synthetic or natural polymer matrices.     

Treatment of dye (Remazol Blue) and heavy metals using yeast cells with the purpose of managing polluted textile wastewaters

The bioaccumulation of chromium(VI), nickel(II), copper(II), and reactive dye by the yeast Rhodotorula mucilaginosa has been investigated in media containing molasses as a carbon and energy source. Optimal pH values for the yeast cells to remove the pollutants were pH 4 for copper(II) and dye, pH 6 for chromium(VI) and dye, and pH 5 for nickel(II) and dye in media containing 50 mg l^?1 heavy metal and 50 mg l^?1 Remazol Blue. The maximum dye bioaccumulation was observed within 4–6 days and uptake yields varied from 93% to 97%. The highest copper(II) removal yields measured were 30.6% for 45.4 mg l^?1 and 32.4% for 95.9 mg l^?1 initial copper(II) concentrations. The nickel(II) removal yield was 45.5% for 22.3 mg l^?1, 38.0% for 34.7 mg l^?1, and 30.3% for 62.2 mg l^?1. Higher chromium(VI) removal yields were obtained, such as 94.5% for 49.2 mg l^?1 and 87.7% for 129.2 mg l^?1 initial chromium(VI) concentration. The maximum dye and heavy metal bioaccumulation yield was investigated in media with a constant dye (approximately 50 mg l^?1) and increasing heavy metal concentration. In the medium with 48.9–98.8 mg l^?1 copper(II) and constant dye concentration, the maximum copper(II) bioaccumulation was 27.7% and 27.9% whereas the maximum dye bioaccumulation was 96.1% and 95.3%. The maximum chromium(VI) bioaccumulation in the medium with dye was 95.2% and 80.3% at 48.2 and 102.2 mg l^?1 chromium(VI) concentrations. In these media dye bioaccumulation was 76.1% and 35.1%, respectively. The highest nickel(II) removal was 6.1%, 20.3% and 16.0% in the medium with 23.8 mg l^?1 nickel(II) + 37.8 mg l^?1 dye, 38.1 mg l^?1 nickel(II) + 33.4 mg l^?1 dye and 59.0 mg l^?1 nickel(II) + 39.2 mg l^?1 dye, respectively. The maximum dye bioaccumulation yield in the media with nickel(II) was 94.1%, 78.0% and 58.7%, respectively.     

Stress responses and specific metal exclusion on mine soils based on germination and growth studies by Australian golden wattle

We reported the Australian golden wattle as a copper stabilizer in abandoned copper mine soils earlier. Here we investigate to confirm this plant’s suitability to grow on metal contaminated mine soils based on stress indication. The seeds of Acacia pycnantha collected from mining area were germinated after heat and no heat treatment on two types of irrigation. The daily irrigated and heat treated seeds gave up to 85% germination on sandy soil. The A. pycnantha was grown under greenhouse condition in six different soils collected from abandoned copper mine at Kapunda in South Australia. Among the six soil samples, soil-1 with the highest copper concentration produced 2.05 mmol g⁻¹ tissue of proline. Proline expression was prominent in more saline soils (1, 5 and 6) having electrical conductivity (EC) 1184, 1364 and 1256 μS, respectively. Chlorophyll a, b and carotenoid levels in plants showed a gradually decreasing trend in all the soils as experiment progressed. The plants grown on soil sample-1, containing 4083 ± 103 mg kg⁻¹ of copper resulted in 18 ± 2 mg kg⁻¹ accumulation in its leaf. The calcium accumulation was significant up to 11648 ± 1209 mg kg⁻¹ in leaf. Although pore water samples showed higher Cu concentration in soils, an increased mobility of arsenic and lead was observed in all the soil samples. Our experiment points out the need for proper monitoring of revegetation processes to avoid revegetation and reclamation failure.     

Evaluation of zinc tolerance and accumulation potential of the coastal shrub Limoniastrum monopetalum (L.) Boiss.

The coastal shrub Limoniastrum monopetalum is capable of growth in soil containing extremely high concentrations of heavy metals. A greenhouse experiment was conducted in order to investigate the effects of a range of Zn concentrations (0–130 mmol l⁻¹) on growth and photosynthetic performance, by measuring relative growth rate, total leaf area, plant height, gas exchange, chlorophyll fluorescence parameters and photosynthetic pigment concentrations. We also determined the total zinc, nitrogen, phosphorus, sulphur, calcium, magnesium, sodium, potassium, iron and copper concentrations in the plant tissues. The study species demonstrated hypertolerance to Zn stress, since survival was recorded with leaf concentrations of up to 1700 mg Zn kg⁻¹ dry mass when treated with 130 mmol Zn l⁻¹. L. monopetalum exhibited little overall effects on photosynthetic function at Zn levels of up to 90 mmol l⁻¹. At greater external Zn concentration, plant growth was negatively affected, due in all probability to the recorded decline in net photosynthetic rate, which may be linked to the adverse effect of the metal on photosynthetic electron transport. Growth parameters were virtually unaffected by leaf tissue concentrations as high as 1400 mg Zn kg⁻¹ dry mass thus indicating that this species could play an important role in the phytoremediation of Zn-polluted areas.     

Production of an anti-MUC1 C595 dbFv antibody fragment in recombinant Escherichia coli

The production of C595 diabody fragment (dbFv) in Escherichia coli (E. coli) HB2151 clone has been explored. The comparison of fermentation processes mode demonstrated that a higher biomass inoculum operation enhanced C595 dbFv production. It was demonstrated that a concentration of 12.1 mg l⁻¹ broth of dbFv and a cell concentration of 23.6 g l⁻¹ broth were achieved at the end of 75 l fermentation.     

Sulfate reduction and microbial community of autotrophic biocathode in response to acidity

Microbial electrolysis cells (MECs) with autotrophic biocathode are a promising technology for removal of pollutants in wastewater. The aim of this study was to investigate the effect of initial acidity of wastewater on performance of sulfate-reducing biocathodes. MECs with biocathodes were operated with initial pH values of catholyte ranged from 3.0 to 7.0. The optimum initial pH value was 6.0 with a maximum sulfate reductive rate and biomass of 57 mg L⁻¹ d⁻¹ and 2.1 ± 0.4 mg g⁻¹, respectively. With initial pH 7.0, the pH value of catholyte increased to 9.8 ± 0.2 after an operation cycle, which resulted in low performance of the biocathode. A considerable sulfate reductive rate of 31 ± 0.85 mg L⁻¹ d⁻¹ was achieved with initial pH 3.0. Desulfovibrio sp. grew dominantly with abundance of 46%–66% in the cathode biofilm with initial pH values from 3.0 to 6.0 and contributed to the sulfate reduction. Clostridium and Parapedobacter also had high abundance in pH 6.0 cathode, indicated that interspecies electron transfer between electrochemical active and sulfate-reducing bacteria could play an important role in sulfate removal. The results suggest that acidity of catholyte is an important factor to be considered to utilize autotrophic biocathode MECs for wastewater treatment.     

Effects of Yucca schidigera extract on fermentation and degradation of steroidal saponins in the rumen simulation technique (RUSITEC)

A rumen simulation technique (RUSITEC) apparatus with eight 940 ml fermentation vessels was used to study the effects of the steroidal saponins in Yucca schidigera extract (YE) on ruminal microbial activity and saponin degradation. The YE contained approximately 4.4% (w/w) saponin, as smilagenin equivalents, and was included at 0 (control) or 0.5 mg ml⁻¹ (n=4) in the McDougall's buffer infused continuously into the vessels (dilution rate=0.75 day⁻¹). Each vessel received 5 g chopped alfalfa hay and 5 g concentrate (as-fed basis) daily for 22 days. Ammonia concentrations were lower (P<0.05) in effluent from vessels receiving YE than from controls for the first half of the study, but did not differ thereafter. Total amounts of VFA in effluent were not affected (P>0.05) by YE, but molar proportions of iso-butyric and iso-valeric acids were lower (P<0.05) in the YE vessels than in the controls in the first half of the experiment. Yucca extract at 0.5 mg ml⁻¹ did not affect (P>0.05) dry matter disappearance (DMD) from hay or from concentrate, nor did it affect total gas or methane production, or bacterial numbers (total or cellulolytic populations) in homogenates prepared from fermenter vessel liquid and feed particles. Protozoal numbers in the homogenates were substantially reduced (P<0.01) by YE (at 0.5 mg ml⁻¹), protease activity was increased (P<0.05), deaminase activity and activity against Ala₂ were unaffected (P>0.05) and activity against Ala₅ was reduced by 25% (P>0.05). When the homogenates from control and YE-supplemented (0.5 mg ml⁻¹) vessels were used to inoculate roll tubes containing 0 or 5 mg ml⁻¹ of YE, fewer colonies developed (P<0.01) in roll tubes containing YE than in those without YE, irrespective of the source of inoculum. Homogenates were also assayed for saponin degradation and for protease, peptidase and deaminase activities. Inoculum from the vessels receiving YE degraded saponin slightly during a 2 h incubation. Yucca extract at 0.5 mg ml⁻¹ altered proteolytic activity and reduced protozoal numbers, but did not affect DMD or bacterial activity, and did not induce resistance to YE at a concentration of 5 mg ml⁻¹.     

Response of miscanthus to toxic cadmium applications during the period of maximum growth

Plants of miscanthus were grown in a Cd-free solution up to 1 month before heading and then were exposed to 0, 0.75, 1.5, 2.25 and 3 mg l⁻¹ cadmium for 36 days. All cadmium levels were toxic to miscanthus. Growth response was not dose-dependent and two toxicity thresholds were identified: one between 0 and 0.75 mg l⁻¹ Cd, the other between 2.25 and 3 mg l⁻¹ Cd. The former caused a biomass decrease by about 50%, whereas the latter completely inhibited growth and disrupted the mechanisms that restricted Cd translocation to the shoot. Growth of the aerial part was affected by cadmium more than that of the hypogeal one. Cadmium did not change the N concentration of different plant parts, but markedly reduced the N uptake of the plant, the N net uptake rate (NUR) and the N net translocation rate (NTR) from the rhizome to the aerial part. These two indexes equalled zero when plants ceased to grow. Otherwise, the Cd-NUR increased with Cd supply and the Cd-NTR from rhizome to aerial part showed the highest increment when plants did not grow at all. This suggests different uptake pathways for the two elements, active for nitrogen and passive for cadmium. The Cd concentration and the Cd content markedly increased with all Cd levels, following the order roots ≫ rhizome > culms > leaves. The Cd concentration and the Cd content of aerial organs increased with Cd supply, but increments were highest between 2.25 and 3 mg l⁻¹ Cd. The highest Cd concentrations were recorded in plants grown with 3 mg l⁻¹ Cd and were 41 and 122 mg kg⁻¹, respectively, for the aerial and the hypogeal plant parts. The hypogeal plant part retained most of the cadmium taken up from solution, accounting for approximately 87% of total plant cadmium with the three lower Cd levels, and for 73% with the highest one. The maximum Cd content of the entire plant was achieved with the two higher Cd levels and was approximately 4.7 mg, while the Cd content of the aerial part was highest with 3 mg l⁻¹ Cd (1.2 mg Cd per plant) and that of the hypogeal one with 2.25 mg l⁻¹ Cd (4 mg Cd per plant). The highest aerial content achieved in this experiment was 10-fold that obtained in a previous research when small-sized plants were exposed to the same Cd level.     

Evaluation of distant carbon sources in biosurfactant production by a gamma ray-induced Pseudomonas putida mutant

Pseudomonas putida 33 wild strain, subjected to gamma ray mutagenesis and designated as P. putida 300-B mutant was used as microbial rhamnolipid-producer by using distant carbon sources (viz. hydrocarbons, waste frying oils ‘WFOs’, vegetable oil refinery wastes and molasses) in the minimal media under shake flask conditions. The behavior of glucose as co-substrate and growth initiator was examined. The 300-B mutant strain showed its ability to grow on all the substrates tested and produced rhamnolipid surfactants to different extents however; soybean and corn WFOs were observed to be preferred carbon sources followed by kerosene and paraffin oils, respectively. The best cell biomass (3.5 g l⁻¹) and rhamnolipids yield (4.1 g l⁻¹) were obtained with soybean WFO as carbon source and glucose as growth initiator under fed-batch cultivation showing an optimum specific growth rate (μ) of 0.272 h⁻¹, specific product yield (q_p) of 0.318 g g⁻¹ h and volumetric productivity (P_V) of 0.024 g l⁻¹ h. The critical micelle concentration of its culture supernatant was observed to be 91 mg rhamnolipids l⁻¹ and surface tension as 31.2 mN m⁻¹.     

A phenanthrene-degrading strain Sphingomonas sp. GY2B isolated from contaminated soils

This study systematically characterized an aerobic bacterial strain Sphingomonas sp. GY2B for biotransformation of phenanthrene. The strain was isolated from soils contaminated with polycyclic aromatic hydrocarbons (PAHs) and was shown to efficiently use phenanthrene as the sole carbon and energy source. The antibiotics discs susceptibility test revealed that the bacterium was susceptible to some commonly used antibiotics, such as cefuroxime, chloramphenicol, erythromycin and tetracycline. It showed better growth at pH 7.4 and 30 °C and in a mineral salts medium (MSM) with phenanthrene at 100 mg L⁻¹ as the substrate. The results indicated that 99.8% of the substrate had been degraded and that salicylate route was likely the metabolic pathway. When added as the second organic chemical, glucose could enhance the bacterial growth at low concentration (10–200 mg L⁻¹), but could inhibit cell growth at high concentration (>500 mg L⁻¹). Further study showed that strain GY2B could also use naphthalene, phenol, 1-hydroxy-2-naphthoic acid, 2-naphthol, salicylic acid and catechol as the sole carbon and energy source, but did not grow on 1-naphthol which could be co-metabolized in the present of phenanthrene or 1-hydroxy-2-naphthoic acid.     

Improved production of lycopene and β-carotene by Blakeslea trispora with oxygen-vectors

Lycopene and β-carotene production were increased when oxygen-vectors, n-hexane and n-dodecane, were added to cultures of Blakeslea trispora because of the enhanced dissolved oxygen concentrations. With 1% (v/v) n-hexane or n-dodecane added in the medium, lycopene production was 51% or 78% higher and β-carotene production was 44% or 65% higher than that of the control, respectively. The highest lycopene and β-carotene production, 533 mg l⁻¹and 596 mg l⁻¹, were obtained when 1% (v/v) n-dodecane and 0.1% (w/v) Span 20 were added together, which were 2.1-fold and 1.8-fold of the control, respectively.