Polymer-immobilized fluorinase: Recyclable catalyst for fluorination reactions

Polymer-immobilized fluorinase for the synthesis of 5′-fluoro-5′-deoxyadenosine (FDA) from S-adenosyl-l-methionine (SAM) and fluoride ion in aqueous media is described. The optimal composition of the poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) and the heterogeneous catalytic reaction conditions were developed to yield FDA in 49% within 150 min. In PET radiochemistry, using [¹⁸F]fluoride ion in [¹⁸O]H₂O obtained from the cyclotron, [¹⁸F]FDA was synthesized with 68% fluorination efficiency. The immobilized fluorinase was recycled for up to four runs with 80% of catalytic activity in the final cycle.     

Exploration of a potential difluoromethyl-nucleoside substrate with the fluorinase enzyme

The investigation of a difluoromethyl-bearing nucleoside with the fluorinase enzyme is described. 5′,5′-Difluoro-5′-deoxyadenosine 7 (F₂DA) was synthesised from adenosine, and found to bind to the fluorinase enzyme by isothermal titration calorimetry with similar affinity compared to 5′-fluoro-5′-deoxyadenosine 2 (FDA), the natural product of the enzymatic reaction. F₂DA 7 was found, however, not to undergo the enzyme catalysed reaction with l-selenomethionine, unlike FDA 2, which undergoes reaction with l-selenomethionine to generate Se-adenosylselenomethionine. A co-crystal structure of the fluorinase and F₂DA 7 and tartrate was solved to 1.8 Å, and revealed that the difluoromethyl group bridges interactions known to be essential for activation of the single fluorine in FDA 2. An unusual hydrogen bonding interaction between the hydrogen of the difluoromethyl group and one of the hydroxyl oxygens of the tartrate ligand was also observed. The bridging interactions, coupled with the inherently stronger C–F bond in the difluoromethyl group, offers an explanation for why no reaction is observed.     

Synthesis of S-licarbazepine by asymmetric reduction of oxcarbazepine with Saccharomyces cerevisiae CGMCC No. 2266

S-licarbazepine was synthesized by asymmetric reduction of oxcarbazepine with CGMCC No. 2266. The optimum batch reduction conditions were found to consist of a reaction time of 36 h, temperature of 30 °C, and initial pH value of 7.0. The optimum concentration of the glucose co-substrate was found to be 0.3 mol L⁻¹. The addition of glucose contributed to in situ regeneration of NADPH in cells and improved conversion. Conversion increased with the addition of more biomass and with a decrease in the initial concentration of substrate. Within the membrane reactor, a continuous reduction process was used to improve production efficiency and reduce the inhibition of high-concentration substrate upon reduction. The optimum flux was found to be 20 ml h⁻¹. S-licarbazepine yield was 3.7678 mmol L⁻¹ d⁻¹ in continuous reduction over four days. The enantiometric excess of S-licarbazepine was 100% for both batch and continuous reduction processes.     

A FRET-based assay for the discovery of West Nile Virus NS2B-NS3 protease inhibitors

The West Nile Virus (WNV) has been a worldwide epidemic since the early 1990s. Currently there are no therapeutic treatments for WNV infections. One particular avenue of treatment is inhibition of the NS2B-NS3 protease, an enzyme that is crucial for WNV replication. In our effort to increase the number of NS2B-NS3 protease inhibitors, we report a novel FRET-based high throughput assay for the discovery of WNV NS2B-NS3 protease inhibitors. For this assay, a FRET-based peptide substrate was synthesized and kinetically characterized with the NS2B-NS3 protease. The new substrate exhibits a K_m of 3.35 ± 0.31 μM, a k_cat of 0.0717 ± 0.0016 s^?1 and a k_cat/K_m of 21,400 ± 2000 M^?1 s^?1.     

Activity of hydroperoxide lyase under aqueous and micro-aqueous conditions

Hydroperoxide lyases (HPL E.C. 4.1.2.) are part of the lipoxygenase pathway in plants and catalyze the conversion of fatty acid hydroperoxides into oxo acids and short chain aldehydes. These aldehydes have desirable properties for the food and agricultural industry. HPL activity can be modulated by salts and surfactants, but the mechanisms governing the modulation are not fully understood. Recombinant HPL activity was evaluated by use of factorial experimental design investigating the effects of KCl and Triton X-100 on HPL activity with 13-hydroperoxy-octadecadienoic acid (LA-OOH) and 13-hydroperoxy-octadienoyl sulfate (LS-OOH) as substrates. To investigate solubility issues of the two different substrates, an aqueous and a two-phase micro-aqueous reaction medium was used. The highest HPL activity (8.7 μmol min⁻¹ mg⁻¹) was achieved under aqueous conditions with high salt (1.5 M) and low surfactant (0%, v/v) concentrations and LA-OOH as a substrate. Maximal activity (2.4 μmol min⁻¹ mg⁻¹) under micro-aqueous conditions was achieved with high salt (1.5 M) and high surfactant (0.01%, v/v) concentrations and LS-OOH as a substrate. A significant interaction between salt and surfactant as well as salt and substrate could be identified and a hypothesis for the interaction phenomena is presented.     

The correction of reaction rates in continuous fluorometric assays of enzymes

The kinetic data obtained from the action of a cathepsin D-like enzyme from Biomphalaria glabrata hepatopancreas (digestive gland) on MOCAc-Gly-Lys-Pro-Ile-Leu-Phe-Phe-Arg-Leu-Lys(DNp)-D–Arg-NH₂, was studied as a data prototype, generated by means of a fluorogenic substrate. An initial fluorescence, due to incomplete energy transfer, of about 8% of the values attained after complete substrate hydrolysis; a non-linear standard curve even at μM concentrations and an exponential decay of the steady state fluorescence of reaction product of the order of 10^− 4 × s^− 1 were the main analytical problems encountered. The standard curves for fluorescence of the substrate reaction product after 48 h of hydrolysis, and the reference compound MOCAc-Pro-Leu-Gly-NH₂, were fitted by polynomial approximation and the point derivates used as calibration factors. Time dependence of the calibration factor for the reaction product was − 2.96 × 10^− 4 a.u μM^− 1 × s^− 1 that is, in the same order of observed enzymic reaction rates. A mathematical treatment was devised for obtaining rates corrected for errors derived from the three analytical problems indicated. The method is of general application in continuous fluorometric assays, irrespective of the particular enzyme used, but of special value for substrates that present significant initial fluorescence. The reaction rates were 11% higher; as calculated by means of the calibration factor [substrate] ÷ (final − initial fluorescence intensities), which is the prevalent procedure in the literature; leading to underestimation of K_m and overestimation of V_max.     

Carbon sequestration potential of green roofs using mixed-sewage-sludge substrate in Chengdu World Modern Garden City

Green roofs which use sewage sludge to sequestrate urban carbon dioxide may represent a potential opportunity to evaluate carbon sequestration benefits for the urban development under increasing global climate change. In this study, green roofs composed of 6 small green segments with two different substrates, mixed-sewage-sludge substrate (MSSS, volume ratio of sewage sludge and local-natural soil 1:1), and local-natural soil (LNS), three different substrate depths (20 cm, 25 cm and 30 cm), and three types of native plants (Ligustrum vicaryi, Neottia auriculata, and Liriope spicata) in Chengdu City were established to determine carbon sequestration from July 2012 to July 2013 through assessment of the carbon storage and sequestration. Results show that the average carbon storage of MSSS and LNS on green roofs was respectively 13.15 kg C m⁻² and 8.58 kg C m⁻², and the average carbon sequestration followed the order of LNS (3.89 kg C m⁻² yr⁻¹) > MSSS (3.81 kg C m⁻² yr⁻¹). Thus MSSS could be considered as a potential material for carbon sequestration. The carbon storage and carbon sequestration by native plants on the green roofs followed the order of L. vicaryi > L. spicata > N. auriculata. The whole green roof had a mean carbon storage of 18.28 kg C m⁻² and average carbon sequestration of 6.47 kg C m⁻² yr⁻¹ in the combined biomass and substrate organic matter. The best green roof configuration was L. vicaryi together with MSSS substrate, with a middle-high level of carbon sequestration. It will be feasible and worthwhile to scale-up the adaptable green roof configurations in Chengdu World Modern Garden City.     

Production of a collagenase from Candida albicans URM3622

Culture conditions (pH, time, temperature, inoculum size, orbital agitation speed and substrate concentration) for an extracellular collagenase produced by Candida albicans URM3622 were studied using three experimental designs (one 2⁶⁻² fractionary factorial and two 2³ full factorial). The analysis of the 2⁶⁻² fractionary design data indicated that agitation speed and substrate concentration had the most significant effect on collagenase production. Based on these results, two successive 2³ full factorial design experiments were run in which the effects of substrate concentration, orbital agitation speed and pH were further studied. These two sets of experiments showed that all variables chosen were significant for the enzyme production, with the maximum collagenolytic activity of 6.8 ± 0.4 U achieved at pH 7.0 with an orbital agitation speed of 160 rpm and 2% substrate concentration. Maximum collagenolytic activity was observed at pH 8.2 and 45 °C. The collagenase was stable within a pH range of 7.2–8.2 and over a temperature range of 28–45 °C. These results clearly indicate that C. albicans URM3622 is a potential resource for collagenase production and could be of interest for pharmaceutical, cosmetic and food industry.     

A new fungal peroxidase with alkaline-tolerant,chloride-enhancing activity and dye decolorization capacity

A new fungal peroxidase (Pspd) from Perenniporia subacida was purified by ammonium sulfate precipitation, DEAE-cellulose DE52 anionic exchange and Sepharose GL-6B chromatography, resulting in a high specific activity of 9.138 U mg⁻¹, 3.622-fold higher than that of crude enzyme at the same level. Polyacrylamide gel electrophoresis and UV–vis adsorption spectrum analysis showed that the purified enzyme is a heme-containing monomer with a molecular mass of 43.0 kDa. Optimal peroxidase activity was obtained at pH 5.5 and 30 °C when using 100.0 mM n-propanol as substrate, and under these conditions, the catalytic efficiency (k_cat/K_m) is 1.57 s⁻¹ μM⁻¹. Pspd was inhibited by l-cysteine, dithiothreitol, EDTA and sodium azide, but stimulated by Mn²⁺, Na⁺, Mg²⁺ and K⁺. The enzyme is stable over a broad pH range of 7.0–8.5 after incubation for 72 h, which indicated that the enzyme is lasting alkaline-tolerant. It was worth noting that the chloride at relatively low concentrations can enhance the peroxidase activity, with concomitant increase in substrate affinity. Additionally, Pspd performed high decolorization capability toward structurally various dyes and the capability was independent of the oxidizing mediators, with 75.31% of Neutral Red (50.0 mg L⁻¹) being decolorized by 1.5 U mL⁻¹ pure enzyme after incubation for 72 h. These properties demonstrated that Pspd has potentials for textile dyes decolorization applications.     

Enzymatic hydrolysis of corncob and ethanol production from cellulosic hydrolysate

 Enzymatic hydrolysis of corncob and ethanol fermentation from cellulosic hydrolysate were investigated. After corncob was pretreated by 1% H₂SO₄ at 108 °C for 3 h, the cellulosic residue was hydrolyzed by cellulase from Trichoderma reesei ZU-02 and the hydrolysis yield was 67.5%. Poor cellobiase activity in T. reesei cellulase restricted the conversion of cellobiose to glucose, and the accumulation of cellobiose caused severe feedback inhibition to the activities of β-1,4-endoglucanase and β-1,4-exoglucanase in cellulase system. Supplementing cellobiase from Aspergillus niger ZU-07 greatly reduced the inhibitory effect caused by cellobiose, and the hydrolysis yield was improved to 83.9% with enhanced cellobiase activity of 6.5 CBU g⁻¹ substrate. Fed-batch hydrolysis process was started with a batch hydrolysis containing 100 g l⁻¹ substrate, with cellulosic residue added at 6 and 12 h twice to get a final substrate concentration of 200 g l⁻¹. After 60 h of reaction, the reducing sugar concentration reached 116.3 g l⁻¹ with a hydrolysis yield of 79.5%. Further fermentation of cellulosic hydrolysate containing 95.3 g l⁻¹ glucose was performed using Saccharomyces cerevisiae 316, and 45.7 g l⁻¹ ethanol was obtained within 18 h. The research results are meaningful in fuel ethanol production from agricultural residue instead of grain starch.     

Use of response surface methodology for the optimization of the lipase-catalyzed synthesis of mannosyl myristate in pure ionic liquid

The purpose of the present study is to find the conditions allowing to reach the highest 24 h-yield (24 h-η) for the synthesis of mannosyl myristate catalyzed by the immobilized lipase B from Candida antarctica (Novozym^® 435) in the ionic liquid (IL) [Bmpyrr][TFO] (1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate). A full factorial design (FFD) was used in order to study the influence of three variables (temperature, mannose/vinyl myristate ratio and total substrate quantity) on the 24 h-η. This design led to a model based on a second order polynomial response function. The resulting predicted contour plots have shown that the highest 24 h-η should be obtained with high temperatures, low sugar/vinyl ester molar ratio and intermediate total substrate quantities (mmol). The model has been successfully verified and experimentally confirmed at the optimal conditions of 80 °C, substrate molar ratio of 1/10 and total substrate quantity of 0.26 mmol leading to the highest predicted 24 h-η of 72.2%.     

Purification and characterization of a new carbonyl reductase from Leifsonia xyli HS0904 involved in stereoselective reduction of 3,5-bis(trifluoromethyl) acetophenone

Leifsonia xyli HS0904 can stereoselectively catalyze the bioreduction of 3,5-bis(trifluoromethyl) acetophenone (BTAP) to its corresponding alcohol, which is a valuable chiral intermediate in the pharmaceuticals. In this study, a new carbonyl reductase derived from L. xyli HS0904 was purified and its biochemical properties were determined in detail. The carbonyl reductase was purified by 530-fold with a specific activity of 13.2 U mg⁻¹ and found to be a homodimer with a molecular mass of 49 kDa, in which the subunit molecular-weight was about 24 kDa. The purified enzyme exhibited a maximum enzyme activity at 34 °C and pH 7.2, and retained over 90% of its initial activity at 4 °C and pH 7.0 for 24 h. The addition of various additives, such as Ca²⁺, Mg²⁺, Mn²⁺, l-cysteine, l-glutathione, urea, PEG 1000 and PEG 4000, could enhance the enzyme activity. The maximal reaction rate (V_max) and apparent Michaelis–Menten constant (K_m) of the purified carbonyl reductase for BTAP and NADH were confirmed as 33.9 U mg⁻¹, 0.383 mM and 69.9 U mg⁻¹, 0.412 mM, respectively. Furthermore, this enzyme was found to have a broad spectrum of substrate specificity and can asymmetrically catalyze the reduction of a variety of ketones and keto esters.     

Optimization of biomass production with enhanced glucan and dietary fibres content by Pleurotus ostreatus ATHUM 4438 under submerged culture

This work was aimed at optimizing biomass production by the edible basidiomycete Pleurotus ostreatus ATHUM 4438 in a submerged process with enhanced glucan and dietary fibres content. β-Glucan from Pleurotus sp. (pleuran) has been used as food supplements due to its immunosuppressive activity. Like other dietary fibre components, oyster mushroom polysaccharides can stimulate the growth of colon microorganisms (probiotics), i.e. act as prebiotics. We used the FF MicroPlate for substrate utilization and growth monitoring. The pattern of substrate catabolism forms a substrate assimilation fingerprint which is useful in selecting media components for media optimization of maximum biomass production. Different carbon sources (95) were used and then 8 of them were tested in shake flask cultures. The effect of various organic and complex nitrogen sources on biomass production was also examined and response surface methodology based on central composite design was applied to explore the optimal medium composition. When the optimized culture medium was tested in a 20-L stirred tank bioreactor, using 57 g L⁻¹ xylose and 37 g L⁻¹ corn steep liquor, high yields (39.2 g L⁻¹) of dry biomass was obtained. The yield coefficients for total glucan and dietary fibres on mycelial biomass formed were 140 ± 4 and 625 ± 9 mg g⁻¹ mycelium dry weight, respectively.     

Improvement of biodegradation in compact co-current biotrickling filter by high recycle liquid flow rate: Performance and biodegradation kinetics of ammonia removal

As a microbial-environmental-control-type deodorizing system, we have developed a compact biotrickling filter system for small-scale livestock farms. The performance of the compact co-current biotrickling filter operated at high recycle liquid flow rates was systematically examined. In particular, we studied improvements in the nitrification ability of the system due to the resultant enhancement of absorption and dissolution of NH₃ and absorption of O₂ with the high flow rates of recycle liquid flowing downward co-currently with gas flow. At the empty bed residence time of 50 s, almost complete removal of NH₃ was obtained with recycle liquid flow rates of 103 and 205 L m⁻³ day⁻¹ for 20 days while the inlet NH₃ concentration was increased from 200 to 500 ppm. With a recycle liquid flow rate of 411 L m⁻³ day⁻¹ the removal efficiency remained above 95% for 57 days while the inlet NH₃ concentration was increased from 200 to 700 ppm. The biodegradation kinetics for NH₃ removal was successfully analyzed using the Haldane substrate inhibition kinetics. The present data and kinetic analyses showed that the substrate inhibition was suppressed and the biodegradation of ammonia in the compact biotrickling filter could be improved by the high recycle liquid flow rate.     

Proposed kinetic mechanism of the production of biodiesel from palm oil using lipase

Experimental determination of the separate effects of palm oil and methanol concentrations on the rate of their enzymatic transesterification was used to propose suitable mechanismic steps and to test the generated kinetic model. The reaction took place in n-hexane organic medium and the lipase used was from Mucor miehei. At a constant methanol concentration of 300 mol m⁻³, it was found that, initially as the palm oil concentration increased, the initial reaction rate increased. However, the initial rate dropped sharply at substrate concentrations larger than 1250 mol m⁻³. Similar behaviour was observed for methanol concentration effect, where at a constant substrate concentration of 1000 mol m⁻³, the initial rate of reaction dropped at methanol concentrations larger than 3000 mol m⁻³. Ping Pong Bi Bi mechanism with inhibition by both reactants was adopted as it best explains the experimental findings. A mathematical model was developed from a proposed kinetic mechanism and was used to identify the regions where the effect of inhibition by both substrates arised. The proposed model equation is essential for predicting the rate of methanolysis of palm oil in a batch or a continuous reactor and for determining the optimal conditions for biodiesel production.     

Online immobilized enzyme microreactor for the glucose oxidase enzymolysis and enzyme inhibition assay

An online immobilized glucose oxidase (GOx) capillary microreactor was developed based on an enzymatic redox reaction with 1,4-benzoquinone as an acceptor of electrons, replacing the molecular oxygen typically used in a GOx reaction to achieve direct ultraviolet detection without derivation. A high efficiency of enzymolysis was obtained at 1 mg ml^?1 1,4-benzoquinone for 5 min of incubation at 25 °C, and baseline separation of the substrate and product could be achieved with a resolution of 3.85 by employing 20 mM phosphate buffer (pH 8.0) containing 40 mg ml^?1 sulfated β-cyclodextrin as an additive, a constant voltage of 15 kV, and a detection wavelength of 220 nm. In addition, an online enzyme inhibition study was performed on the immobilized GOx microreactor with metal ions Ag⁺ and Cu²⁺ used as model inhibitors. The results indicate that Ag⁺ (IC₅₀ = 69.16 μM) has a markedly higher inhibitory effect than Cu²⁺ (IC₅₀ = 1.33 mM). The protocol described can be applied in high-throughput screening of enzyme reactions and inhibitors.     

Efficient synthesis of l-tert-leucine through reductive amination using leucine dehydrogenase and formate dehydrogenase coexpressed in recombinant E. coli

Enantiopure l-tert-leucine (l-Tle) was synthesized through reductive amination of trimethylpyruvate catalyzed by cell-free extracts of recombinant Escherichia coli coexpressing leucine dehydrogenase (LeuDH) and formate dehydrogenase (FDH). The leudh gene from Lysinibacillus sphaericus CGMCC 1.1677 encoding LeuDH was cloned and coexpressed with NAD⁺-dependent FDH from Candida boidinii for NADH regeneration. The batch reaction conditions for the synthesis of l-Tle were systematically optimized. Two substrate feeding modes (intermittent and continuous) were addressed to alleviate substrate inhibition and thus improve the space-time yield. The continuous feeding process was conveniently performed in water at an overall substrate concentration up to 1.5 M, with both conversion and ee of >99% and space-time yield of 786 g L⁻¹ d⁻¹, respectively. Furthermore, the preparation was successfully scaled up to a 1 L scale, demonstrating the developed procedure showed a great industrial potential for the production of enantiopure l-Tle.     

Bioprocess strategies for mass multiplication of and metabolite synthesis by plant growth promoting pseudomonads for agronomical applications

The exponential substrate feeding (open-loop) and automated feedback substrate feeding (closed loop) strategies were developed to obtain high cell densities of fluorescent pseudomonad strains R62 and R81 and enhanced production of antifungal compound 2,4-diacetylphloroglucinol (DAPG) from glycerol as a sole carbon source. The exponential feeding strategy resulted in increased glycerol accumulation during the fed-batch cultivation when the predetermined specific growth rate (μ) was set at 0.10 or 0.20 h^?1 (<μ_m = 0.29 h^?1). Automated feeding strategies using dissolved oxygen (DO) or pH as feedback signals resulted in minimal to zero accumulation of glycerol for both the strains. In case of DO-based feeding strategy, biomass productivity of 0.24 g/(L h) and 0.29 g/(L h) was obtained for R62 and R81, respectively. Using pH-based feeding strategy, biomass productivity could be increased to a maximum of 0.51 and 0.54 g/(L h), for the strains R62 and R81, respectively, whereas the DAPG concentration was enhanced to 298 mg/L for R62 and 342 mg/L for R81 strains. These yields of DAPG are thus far the highest reported from GRAS organisms.     

Characterization of an extracellular thermophilic alkaline esterase produced by Bacillus subtilis DR8806

This work is a report of the characterization of an alkaline lipolytic enzyme isolated from Bacillus subtilis DR8806. The extracellular extract was concentrated using ammonium sulfate, and ultrafiltration. The active enzyme was purified by Q-sepharose ion exchange chromatography. The molecular mass of the enzyme was estimated to be 60.25 kDa based on SDS-PAGE (sodium dodecyl sulfate polyacrylamide gel electrophoresis). The optimum pH and temperature of this enzyme were observed to be 8.0 and 50 °C, respectively. The enzyme exhibited a half-life of 72 min at its optimum temperature. It was stable in the presence of metal ions (10 mM) such as Ca²⁺, K⁺ and Na⁺, whereas Cu²⁺, Fe²⁺, Zn²⁺, Mn²⁺, Co²⁺, Mg²⁺ and Hg²⁺ were found to have inhibitory effects. However, the enzyme activity was not affected significantly by 1% Triton X-100. The study of substrate specificity showed that the purified enzyme has a preferential specificity for small ester of p-nitrophenyl acetate (C₂), and it was the most efficiently hydrolyzed substrate as compared to the other esters. The kinetic parameters showed that the enzyme has K_m of 4.2 mM and V_max of 151 μmol min⁻¹ mg⁻¹ for p-nitrophenyl acetate. The hydrolysis rates of the fluorescence substrates were increased in the presence of the purified enzyme. Regarding the features of the enzyme, it may be utilized as a novel candidate for industrial applications.     

Phosphorus sorption by sediments in a subtropical constructed wetland receiving stormwater runoff

This study investigated the potential of using a mixture of fishpond bund material, completely decomposed granite and river sand as substrate in a constructed wetland for phosphorus removal. Core samples were collected from the newly constructed Hong Kong Wetland Park (HKWP) receiving influent stormwater from a nearby new town, and batch incubation experiments were conducted to determine the P sorption characteristics of sediments. The HKWP sediments adsorbed the majority of available P in the initial 20 min of incubation, with a first-order rate constant of 1.01–2.11 h^?1. Sediments in the reedbeds and freshwater marshes possessed a great capacity for P adsorption with the high Langmuir sorption maxima (478–858 mg kg^?1) and Freundlich adsorption constants (417–672 L kg^?1) obtained, attributable to the high amorphous iron and aluminium concentrations compared to other constructed wetlands. Moreover, sediment equilibrium P concentrations were generally low (4.6–23.6 μg L^?1), facilitating a net P adsorption by sediments under moderate P loadings. Yet, the amount of P adsorbed by the HKWP sediments was limited by the low ambient porewater P concentrations and there was even a risk of P desorption when sediments in the freshwater marshes were resuspended into the water column. While substrates in the HKWP demonstrated a great potential for P adsorption, consideration should also be given to P loadings in influent water to fully utilize the P sorption capacity of sediments and enhance the P removal efficiency of constructed wetlands.