Structural characterization of Er3+,Yb3+‐doped Gd2O3 phosphor,synthesized using the solid‐state reaction method,and its luminescence behavior

We report the synthesis and structural characterization of Er³⁺,Yb³⁺‐doped Gd₂O₃ phosphor. The sample was prepared using the conventional solid‐state reaction method, which is the most suitable method for large‐scale production. The prepared phosphor sample was characterized using X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermoluminescence (TL), photoluminescence (PL) and CIE techniques. For PL studies, the excitation and emission spectra of Gd₂O₃ phosphor doped with Er³⁺ and Yb³⁺ were recorded. The excitation spectrum was recorded at a wavelength of 551 nm and showed an intense peak at 276 nm. The emission spectrum was recorded at 276 nm excitation and showed peaks in all blue, green and red regions, which indicate that the prepared phosphor may act as a single host for white light‐emitting diode (WLED) applications, as verified by International de I'Eclairage (CIE) techniques. From the XRD data, the calculated average crystallite size of Er³⁺ and Yb³⁺‐doped Gd₂O₃ phosphor is ~ 38 nm. A TL study was carried out for the phosphor using UV irradiation. The TL glow curve was recorded for UV, beta and gamma irradiations, and the kinetic parameters were also calculated. In addition, the trap parameters of the prepared phosphor were also studied using computerized glow curve deconvolution (CGCD). Copyright © 2015 John Wiley & Sons, Ltd.     

Influence of Er3+ concentration on the photoluminescence characteristics and excitation mechanism of Gd2O3:Er3+ phosphor synthesized via a solid‐state reaction method

An Er³⁺‐doped phosphor of Gd₂O₃ (Gd₂O₃:Er³⁺) was prepared using a conventional solid‐state reaction method. The structure and particle size were determined from X‐ray powder diffraction measurements. The average particle size of the phosphor was in between 20 and 50 nm. The particle size and structure of the phosphor were further confirmed by transmission electron microscopy (TEM) analysis. Luminescence spectra were recorded under excitation wavelengths of 275, 380, 515 and 980 nm. The visible upconversion and downconversion luminescence spectra of the Gd₂O₃:Er³⁺ phosphor were investigated as a function of Er³⁺ ion concentration. The upconverted emission at 980 nm excitation shows enhanced red emission with respect to green emission as the dopant concentration increased. Similar results were observed for downconversion emission under 275 and 380 nm excitation wavelengths. The mechanisms responsible for populating the ⁴S_3/2 and ⁴ F_9/2 levels, for green and red emissions, respectively, are different for different excitations and for different concentrations of Er³⁺. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of erbium‐doped YAlO3 phosphor

In the yttrium aluminium system, the YAlO₃ phosphor is a prominent host because of the yttrium aluminium ratio (1:1). Phosphor was synthesized by the solid‐state reaction method at variable concentrations of erbium (0.1–2.5 mol%). This method is suitable for large‐scale production and is a less time‐consuming method when compared with the soft synthesis method. The prepared sample was characterized by X‐ray diffraction technique and the crystallite size was calculated by Scherer's formula. Vibrational and bending analysis of prepared phosphor for optimized concentration of erbium ion is described based on the Fourier transform infrared spectroscopic technique. The photoluminescence (PL) emission spectra of prepared phosphor for variable concentrations of erbium ion were recorded and the excitation spectrum was found to be at 291 nm with three shoulder peaks at 305, 270 and 242 nm. For 291 nm excitation, the emission spectrum was found at 546 nm and 552 nm. PL intensity increased with increasing concentrations of erbium and after 2 mol% emission intensity decreased due to concentration quenching. Spectrophotometric determination of YAlO₃:Er³⁺ is described by CIE co‐ordinates and shows an intense emission in the green region such that the prepared phosphor can act as a single host for green light emission. Thermoluminescence glow curve analysis of the YAlO₃:Er³⁺ phosphor was recorded for different ultraviolet (UV) light exposures and gamma exposure. Different gamma doses 0.5–2 kGy show a linear response. Kinetic parameters were calculated by the peak shape method. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of annealing on down‐conversion properties of monoclinic Gd2O3:Er3+ nanophosphors

Erbium‐doped nano‐sized Gd₂O₃ phosphor was prepared by a solution combustion method in the presence of urea as a fuel. The phosphor was characterized by X‐ray diffractometry (XRD), Fourier transform infra‐red spectroscopy, energy dispersive X‐ray analysis (EDX) and transmission electron microscopy (TEM). The results of the XRD shows that the phosphor has a monoclinic phase, which was further confirmed by the TEM results. Particle size was calculated by the Debye–Scherrer formula. The erbium‐doped Gd₂O₃ nanophosphor was revealed to have good down‐conversion (DC) properties and the intensity of phosphor could be modified by annealing. The effects of annealing at 900°C on the particle size and luminescence properties were studied and compared with freshly prepared Gd₂O₃:Er³⁺ nanoparticles. The average particle sizes were calculated as 8 and 20 nm for the freshly prepared samples and samples annealed at 900°C for 1 h, respectively. The results show that both freshly prepared and annealed Gd₂O₃:Er³⁺ have monoclinic structure. Copyright © 2014 John Wiley & Sons, Ltd.     

Spectral‐converting study of Ba9–3(m+n)/2ErmYbnY2Si6O24 (m = 0.005 – 0.2, n = 0 – 0.3) orthosilicate phosphors

Optical materials composed of Ba_9–3(m+n)/2Er_mYb_nY₂Si₆O₂₄ (m = 0.005–0.2, n = 0–0.3) were prepared using a solid‐state reaction. The X‐ray diffraction patterns of the obtained phosphors were examined to index the peak positions. The photoluminescence (PL) excitation and emission spectra of the Er³⁺‐activated phosphors and the critical emission quenching as a function of Er³⁺ content in the Ba_9–3m/2Er_mY₂Si₆O₂₄ structure were monitored. The spectral conversion properties of Er³⁺ and Er³⁺–Yb³⁺ ions doped in Ba₉Y₂Si₆O₂₄ phosphors were elucidated under diode‐laser irradiation at 980 nm. Up‐conversion emission spectra and the dependence of the emission intensity on pump power for the Ba_8.55Er_0.1Yb_0.2Y₂Si₆O₂₄ phosphor were investigated. The desired up‐conversion of the emitted light, which passed through the green, yellow, orange and red regions of the spectrum, was achieved through the use of appropriate Er³⁺ and/or Yb³⁺ concentrations in the host structure and 980 nm excitation light. The up‐conversion mechanism in the phosphors is described by an energy‐level schematic. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel blue‐emitting SrMg2Al16O27:Eu2+ phosphor for solid‐state lighting

Eu²⁺‐activated SrMg₂Al₁₆O₂₇ novel phosphor was synthesized by a combustion method (550°C furnace). The prepared phosphor was first characterized by X‐ray diffraction (XRD) for confirmation of phase purity. SEM analysis showed the morphology of the phosphor. The photoluminescence characteristics showed broad‐band excitation at 324 nm, which was monitored at 465 nm emission wavelength. The SrMg₂Al₁₆O₂₇:Eu²⁺ phosphor shows broad blue emission centred at 465 nm, emitting a blue light corresponding to 4f⁶5d¹ → 4f⁷ transition. Here we report the photoluminescence characteristics of the prepared phosphor and compare it with commercial BAM:Eu²⁺ phosphor. Copyright © 2011 John Wiley & Sons, Ltd.     

A new Pr3+‐activated molybdate‐based phosphor for application to white LEDs with blue excitation

The novel red‐emitting phosphors K_xSr_1?2xMoO₄:Pr³⁺_x (0.00 ≤ x ≤ 0.04) were prepared by solid‐state reaction. The crystallization and particle sizes of samples were investigated by powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). TEM images were in good agreement with the theoretical calculation data from the XRD patterns. Photoluminescence analysis indicated that there were three excitation peaks under 430–500 nm, and all samples showed the intensely red emission at 648 nm corresponding to the ³P₀ → ³F₂ transition of Pr³⁺. The concentrations of doping ions, temperature and polyethylene glycol in the phosphor system can significantly influence the intensity of the red emission. The photoluminescence spectral intensity reached its maximum at x = 0.02. The results showed that the investigated phosphor is a potential red phosphor for white light‐emitting diodes. Copyright © 2010 John Wiley & Sons, Ltd.     

Tunable mid‐infrared luminescence from Er3+‐doped germanate glass

Er³⁺‐doped germanate glasses with superior thermal stability were prepared. Judd–Ofelt intensity parameters and important spectroscopic properties were discussed in detail. Upon 800 nm and 980 nm LD pumping, 2.7 µm fluorescence characteristics were investigated and it was found that the effective 2.7 µm emission bandwidth can reach to 101.79 nm in prepared glasses. The tunability of the 2.7 µm emission band can be realized by adjusting the Er³⁺ content. Moreover, a high‐emission cross‐section (11.09 ×10^‐21 cm²), large gain bandwidth (772.30 ×10^‐28 cm³) and gain coefficient (6.72 cm^‐1) were obtained in the prepared sample. Hence, Er³⁺‐doped germanate glass might be a promising mid‐infrared material for tunable amplifiers or lasers. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence characterization of KBaPO4:RE (RE = Sm3+,Eu3+,Dy3+) phosphors

KBaPO₄ luminescent powdered phosphors doped with rare earth elements (RE = Sm³⁺,Eu³⁺,Dy³⁺) were successfully synthesized using a wet chemical method to identify the most suitable phosphor for solid‐state lighting based on the measurement of their emission spectra at excitation wavelengths. The X‐ray diffraction pattern of the as‐prepared KBaPO₄ was well matched with its standard JCPDS file no. 330996, indicating the formation of the desired compound. Scanning electron microscopy images revealed irregular morphology, the material crystallized particles aggregated and were non‐uniform with particle sizes ranging from 1 to 100 μm. Photoluminescence excitation and emission spectra clearly indicated that the phosphor containing the Sm³⁺‐activated KBaPO₄ phosphors could be efficiently excited at 403 nm and exhibited an emission mainly including two wavelength peaks at 559 nm and 597 nm. The phosphor containing the Eu³⁺‐activated KBaPO₄ phosphors could be efficiently excited at 396 nm and exhibited a bright red emission mainly including two wavelength peaks at 594 nm and 617 nm. The phosphor containing the Dy³⁺‐activated KBaPO₄ phosphors could be efficiently excited at 349 nm and exhibited wavelength peaks at 474 nm and 570 nm.     

Luminescent properties of MAl(SO4)2Br:Eu3+ (M = Sr or Mg) red phosphors for near‐UV light‐emitting diodes

Eu³⁺‐activated MAl(SO₄)₂Br phosphors (where M = Mg or Sr) are successfully prepared using a wet chemical reaction technique. The samples are characterized by X‐ray diffraction (XRD) and photoluminescence (PL) spectroscopies. The XRD pattern revealed that both the samples are microcrystalline in nature. PL of Eu³⁺‐doped SrAl(SO₄)₂Br and MgAl(SO₄)₂Br phosphors exhibited characteristic red emission coming from the ⁵D₀ → ⁷F₂ (616 nm) electron transition, when excited by 396 nm wavelength of light. The maximum intensity of luminescence was observed at a concentration of 1 mol% Eu³⁺. The intensity of the electric dipole transition at 616 nm is greater than that of the magnetic dipole transition at 594 nm. The results showed that MAl(SO₄)₂Br:Eu³⁺, (M = Mg, Sr) phosphors have potential application in near‐UV light‐emitting diodes as efficient red‐emitting phosphor. Copyright © 2014 John Wiley & Sons, Ltd.     

Investigation on luminescence properties of Eu2+‐doped Ba3Al2O5Cl2 phosphor for near‐UV‐excited white LEDs

Ba₃Al₂O₅Cl₂:Eu²⁺ phosphor was prepared by combustion synthesis (CS). The prepared phosphor was excited at 329 nm; the phosphors shows an efficient bluish‐green wide‐band emission centred at 490 nm, which originates from the 4f⁶d¹ → 4f⁷ transition of Eu²⁺ ions. The excitation spectra of the phosphors have a band centred at 329 nm. It was also characterized by XRD, FT–IR for confirmation of phase purity, and FT–IR analysis indicated the vibrations of metal–oxygen (M–O) groups. SEM shows the morphology of the phosphor at the submicron scale. The results indicate that Ba₃Al₂O₅Cl₂:Eu²⁺ phosphor may be applicable for solid‐state lighting purposes. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminescence investigation of a cerium‐doped yttrium vanadate phosphor

Cerium (Ce³⁺)‐doped (1, 3, and 7 mol%) yttrium vanadate phosphors were prepared using a co‐precipitation technique. The structural and optical properties of the synthesized samples were studied using X‐ray diffraction (XRD), Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), high‐resolution transmission electron microscopy (HR‐TEM), optical absorption, and photoluminescence (PL) spectroscopy techniques. The tetragonal structure and the formation of the nanosized crystallites in the YVO₄:Ce phosphor were confirmed using XRD analysis. HR‐TEM morphology showed rod‐like nanoparticles of different sizes. Optical absorption spectra demonstrated strong absorption bands at 268 and 276 nm. PL spectra showed strong peaks at 546, 574, and 691 nm following excitation at 300 nm. The calculated CIE chromaticity coordinates demonstrated that YVO₄:Ce could be used as a novel phosphor for the development of light‐emitting diode lamps.     

Evaluation of trapping parameters of γ‐rays irradiated Dy3+‐doped LaPO4 phosphors

Thermoluminescence (TL) materials are widely used in radiation measurements. The best‐known applications of TL materials are in the dosimetry of ionizing radiation, and in CTV screen phosphors, scintillators, X‐ray laser materials, etc. The TL glow curve and its kinetic parameters for annealed LaPO₄ at different constant temperatures and for Dy³⁺‐doped LaPO₄ phosphors irradiated by gamma‐rays are reported here. The samples were irradiated using a ⁶⁰Co gamma‐ray source at a dose of 10 Gy and the heating rate used for TL measurements was 5ºC/s. The samples were characterized using X‐ray diffraction (XRD), Fourier transform infrared, transmission electron microscopy and TL techniques. The XRD pattern shows that the prepared phosphor has a good crystalline structure with an average crystallite size of ~ 18 nm. The samples show good TL peaks for 0.05, 0.1 and 0.2 mole % doping concentrations of Dy³⁺ ions and anneal above 400ºC. The TL glow curve characteristics of annealed LaPO₄ and Dy³⁺‐doped LaPO₄ were analyzed and trapping parameters calculated using various methods. All TL glow curves obey the second‐order kinetics with a single glow peak, which reveals that only one set of trapping parameter is set for a particular temperature. The TL sensitivity was found to depend upon the annealing temperature and Dy³⁺ doping concentration. The prepared sample may be a new nano phosphor and be useful in TL dosimetry. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhanced green emissions of Er3+/Yb3+ co‐doped Gd2(MoO4)3 by co‐excited up‐conversion processes

Improving the emission from rare earth ions doped materials is of great importance to broaden their application in bio‐imaging, photovoltaics and temperature sensing. The green emissions of Gd₂(MoO₄)₃:Er³⁺/Yb³⁺ powder upon co‐excitation with 980 and 808 nm lasers were investigated in this paper. Distinct enhancement of green emissions was observed compared with single laser excitation. Based on the energy level structure of Er³⁺, the enhancement mechanism was discussed. Moreover, the result of temperature‐dependent enhancement revealed that the enhancement factor reached its maximum (2.5) as the sample heated to 120°C, which is due to the competition of two major thermal effects acting in the co‐excited up‐conversion processes. In addition, the same enhancement of green emissions was also observed in Gd₂(MoO₄)₃:Er³⁺ powder and NaYF₄:Er³⁺/Yb³⁺ powder.     

Investigation of UV‐emitting Gd3+‐doped LiCaBO3 phosphor

Incorporating the Gd³⁺ rare earth ion in the LiCaBO₃ host lattice resulted in narrow‐band UV‐B emission peaking at 315 nm, with excitation at 274 nm. The LiCaBO₃:Gd³⁺ phosphor was synthesized via the solid‐state diffusion method. The structural, morphological and luminescence properties of this phosphor were characterized by X‐ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and photoluminescence (PL) spectroscopy. Electron paramagnetic resonance (EPR) characterization of the as‐prepared phosphors is also reported here. XRD studies confirmed the crystal formation and phase purity of the prepared phosphors. A series of different dopant concentrations was synthesized and the concentration‐quenching effect was studied. Critical energy transfer distance between activator ions was determined and the mechanism governing the concentration quenching is also reported in this paper. Copyright © 2015 John Wiley & Sons, Ltd.     

Fracto‐mechanoluminescence and thermoluminescence properties of UV and γ‐irradiated Ca2Al2SiO7:Ce3+ phosphor

Ce³⁺‐doped calcium aluminosilicate phosphor was prepared by a combustion‐assisted method at an initiating temperature of 600°C. Structural characterization was carried out using X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The absorption spectra of Ca₂Al₂SiO₇:Ce³⁺ showed an absorption edge at 230 nm. The optical characterization of Ca₂Al₂SiO₇:Ce³⁺ phosphor was investigated in a fracto‐mechanoluminescence (FML) and thermoluminescence (TL) study. The peak of ML intensity increased as the height of impact of the moving piston increased. The TL intensity of Ca₂Al₂SiO₇:Ce³⁺ was recorded for different exposure times of UV and γ‐irradiation and it was observed that TL intensity was maximum for a UV irradiation time of 30 min and for a γ‐dose of 1180 Gy. The TL intensity had three peaks for UV irradiation at temperatures 82°C, 125°C and 203°C. Also the TL intensity had a single peak at 152°C for γ‐irradiation. The TL and ML emission spectra of Ca₂Al₂SiO₇:Ce³⁺ phosphor showed maximum emission at 400 nm. The possible mechanisms involved in the TL and ML processes of the Ca₂Al₂SiO₇:Ce³⁺ phosphor are also explained. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation and up‐conversion luminescence properties of LaOBr:Yb3+/Er3+ nanofibers via electrospinning

LaOBr:Yb³⁺/Er³⁺ nanofibers were synthesized for the first time by calcinating electrospun PVP/[La(NO₃)₃ + Er(NO₃)₃ + Yb(NO₃)₃ + NH₄Br] composites. The morphology and properties of the final products were investigated in detail using scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS), X‐ray diffractometry (XRD) and fluorescence spectroscopy. The results indicate that LaOBr:Yb³⁺/Er³⁺ nanofibers are tetragonal in structure with a space group of P4/nmm. The diameter of LaOBr:Yb³⁺/Er³⁺ nanofibers is ~ 147 nm. Under the excitation of a 980‐nm diode laser, LaOBr:Yb³⁺/Er³⁺ nanofibers emit strong green and red up‐conversion emission centering at 519, 541 and 667 nm, ascribed to the ²H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴ F_9/2 → ⁴I_15/2 energy‐level transitions of Er³⁺ ions, respectively. The up‐conversion luminescent mechanism of LaOBr:Yb³⁺/Er³⁺ nanofibers is advanced. Moreover, near‐infrared emission of LaOBr:Yb³⁺/Er³⁺ nanofibers is obtained under the excitation of a 532‐nm laser. The formation mechanism of LaOBr:Yb³⁺/Er³⁺ nanofibers is proposed. LaOBr:Yb³⁺/Er³⁺ nanofibers could be important up‐conversion luminescent materials. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence in Sr4Al14O25:Ce3+ aluminate phosphor

Cerium‐doped Sr₄Al₁₄O₂₅ phosphor is prepared using a single‐step combustion synthesis and its X‐ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) and thermoluminescence (TL) properties are characterized. XRD reveals the formation of the desired phase in the prepared sample. SEM micrographs of the prepared Sr₄Al₁₄O₂₅ phosphor show that the particle size is 10 µm. The prepared Sr₄Al₁₄O₂₅, along with Sr₄Al₁₄O₂₅:Ce_x (x = 0.5–5 mol%) shows a PL emission peak at 314 nm under UV excitation of 262 nm wavelength due to 5d → 4f transition. The phosphor is suitable for higher concentrations of Ce ions. The TL glow peak reveals three clearly visible distinct peaks at temperatures around 130, 231 and 336ºC. The three peaks are separated by deconvolution and kinetic parameters calculated using Chen's peak shape method. The calculation shows that the reaction follows second‐order kinetics with activation energy (E) values of 0.52, 0.81 and 1.12 eV, and frequency factor (s) values of 5.58 × 10⁵, 4.53 × 10⁷ and 4.57 × 10⁸ s^‐1 for the three individual peaks. Copyright © 2014 John Wiley & Sons, Ltd.     

Study of luminescence properties of dysprosium‐doped CaAl12O19 phosphor for white light‐emitting diodes

Dy³⁺‐doped CaAl₁₂O₁₉ phosphors were synthesized utilizing a combustion method. Crystal structure and morphological examinations were performed respectively using X‐ray diffraction (XRD) and scanning electron microscopy (SEM) techniques to identify the phase and morphology of the synthesized samples. Fourier transform infrared spectroscopy (FTIR) estimations were carried out using the KBr method. Photoluminescence properties (excitation and emission) were recorded at room temperature. CaAl₁₂O₁₉:Dy³⁺ phosphor showed two emission peaks respectively under a 350‐nm excitation wavelength, centered at 477 nm and 573 nm. Dipole–dipole interaction via nonradiative energy shifting has been considered as the major cause of concentration quenching when Dy³⁺ concentration was more than 3 mol%. The CIE chromaticity coordinates positioned at (0.3185, 0.3580) for the CaAl₁₂O₁₉:0.03Dy³⁺ phosphor had a correlated color temperature (CCT) of 6057 K, which is situated in the cool white area. Existing results point out that the CaAl₁₂O₁₉:0.03Dy³⁺ phosphor could be a favorable candidate for use in white light‐emitting diodes (WLEDs).