Four free cysteine residues found in human IgG1 of healthy donors

Modifications with different thiol reagents demonstrated that 28 of 32 cysteine residues of human IgG1 are involved in the formation of disulfide bonds, and four cysteines remain free. So IgG1 is a protein possessing both free SH-groups and disulfide bonds. Only one of the four SH-groups is accessible for silver or mercury ions and hydrophobic reagents, whereas the remaining three SH-groups are masked and can be revealed only after deep denaturation of the protein. Detection of the masked cysteine residues was shown to depend on the kinetics of intramolecular changes occurring during denaturation of the protein and on the method of the assay of the SH-groups.     

Evidence for intramolecular disulfide bond shuffling in the folding of mutant human lysozyme

Our previous results using the Saccharomyces cerevisiae secretion system suggest that intramolecular exchange of disulfide bonds occurs in the folding pathway of human lysozyme in vivo (Taniyama, Y., Yamamoto, Y., Kuroki, R., and Kikuchi, M. (1990) J. Biol. Chem. 265, 7570-7575). Here we report on the results of introducing an artificial disulfide bond in mutants with 2 cysteine residues substituting for Ala83 and Asp91. The mutant (C83/91) protein was not detected in the culture medium of the yeast, probably because of incorrect folding. Thereupon, 2 cysteine residues Cys77 and Cys95 were replaced with Ala in the mutant C83/91, because a native disulfide bond Cys77-Cys95 was found not necessary for correct folding in vivo (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). The resultant mutant (AC83/91) was secreted as two proteins (AC83/91-a and AC83/91-b) with different specific activities. Amino acid and peptide mapping analyses showed that two glutathiones appeared to be attached to the thiol groups of the cysteine residues introduced into AC83/91-a and that four disulfide bonds including an artificial disulfide bond existed in the AC83/91-b molecule. The presence of cysteine residues modified with glutathione may indicate that the non-native disulfide bond Cys83-Cys91 is not so easily formed as a native disulfide bond. These results suggest that the introduction of Cys83 and Cys91 may act to suppress the process of native disulfide bond formation through disulfide bond interchange in the folding of human lysozyme.     

Disulfide bonds in rat cutaneous fatty acid-binding protein

Unlike other fatty acid-binding proteins, cutaneous (epidermal) fatty acid-binding proteins contain a large number of cysteine residues. The status of the five cysteine residues in rat cutaneous fatty acid-binding protein was examined by chemical and mass-spectrometric analyses. Two disulfide bonds were identified, between Cys-67 and Cys-87, and between Cys-120 and Cys-127, though extent of formation of the first disulfide bond was rather low in another preparation. Cys-43 was free cysteine. Homology modeling study of the protein indicated the close proximity of the sulfur atoms of these cysteine pairs, supporting the presence of the disulfide bonds. These disulfide bonds appear not to be directly involved in fatty acid-binding activity, because a recombinant rat protein expressed in Escherichia coli in which all five cysteines are fully reduced showed fatty acid-binding activity as examined by displacement of a fluorescent fatty acid analog by long-chain fatty acids. However, the fact that the evolutionarily distant shark liver fatty acid-binding protein also has a disulfide bond corresponding to the one between Cys-120 and Cys-127, and that fatty acid-binding proteins play multiple roles suggests that some functions of cutaneous fatty acid-binding protein might be regulated by the cellular redox state through formation and reduction of disulfide bonds. Although we cannot completely exclude the possibility of oxidation during preparation and analysis, it is remarkable that a protein in cytosol under normally reducing conditions appears to contain disulfide bonds.     

Metallothionein disulfides are present in metallothionein-overexpressing transgenic mouse heart and increase under conditions of oxidative stress

Metallothionein (MT) releases zinc under oxidative stress conditions in cultured cells. The change in the MT molecule after zinc release in vivo is unknown although in vitro studies have identified MT disulfide bond formation. The present study was undertaken to test the hypothesis that MT disulfide bond formation occurs in vivo. A cardiac-specific MT-overexpressing transgenic mouse model was used. Mice were administered saline as a control or doxorubicin (20 mg/kg), which is an effective anticancer drug but with severe cardiac toxicity at least partially because of the generation of reactive oxygen species. A differential alkylation of cysteine residues in MT of the heart extracts was performed. Free and metal-bound cysteines were first trapped by N-ethylmaleimide and the disulfide bonds were reduced by dithiothreitol followed by alkylation with radiolabeled iodoacetamide. Analyses of the differentially alkylated MTs in the heart extract by high performance liquid chromatography, SDS-PAGE, Western blot, and mass spectrometry revealed that disulfide bonds were present in MT in vivo under both physiological and oxidative stress conditions. More disulfide bonds were found in MT under the oxidative stress conditions. The MT disulfide bonds were likely intramolecular and both alpha- and beta-domains were involved in the disulfide bond formation, although the alpha-domain appeared to be more easily oxidized than the beta-domain. The results suggest that under physiological conditions, the formation of MT disulfide bonds is involved in the regulation of zinc homeostasis. Additional zinc release from MT under oxidative stress conditions is accompanied by more MT disulfide bond formation.     

Structure of an antifreeze polypeptide from the sea raven. Disulfide bonds and similarity to lectin-binding proteins.

The antifreeze polypeptide (AFP) from the sea raven, Hemitripterus americanus, is a member of the cystine-rich class of blood antifreeze proteins which enable survival of certain fishes at sub-zero temperatures. Sea raven AFP contains 129 residues with 10 half-cystine residues. We have analyzed these half-cystine residues and established that all 10 of the half-cystine residues appeared to be involved in disulfide bond formation and that disulfide bonds linked Cys7 to Cys18, Cys35 to Cys125, and Cys89 to Cys117. These assignments were established by extensive proteolytic digestions of native AFP using pepsin and thermolysin and purification of the peptides by Sephadex G-15 gel filtration chromatography, anion exchange chromatography, and C18 reverse-phase high performance liquid chromatography. Cystine-containing peptides were detected by a colorimetric assay using nitrothiosulfobenzoate. Disulfide-containing peptides were reduced and alkylated, purified, and analyzed by amino acid analysis. The unreduced disulfide-linked peptides were sequenced directly by automated Edman degradations to confirm the disulfide assignments. Possible arrangements of the two remaining disulfide bonds include linkages Cys69/111 to Cys100/101. The sea raven AFP shares structural similarity with pancreatic stone protein and several lectin-binding proteins, especially with respect to half-cystines, glycines, and bulky aromatic residues. Two of the disulfide linkages we determined for sea raven AFP: Cys7-Cys18 and Cys35-Cys125, are conserved in these proteins. These similarities in covalent structure suggest that the sea raven AFP, pancreatic stone protein, and several lectin-binding proteins comprise a family of proteins which may possess a common fold.     

Disulfide bond formation during the folding of influenza virus hemagglutinin

To study the importance of individual sulfhydryl residues during the folding and assembly in vivo of influenza virus hemagglutinin (HA), we have constructed and expressed a series of mutant HA proteins in which cysteines involved in three disulfide bonds have been substituted by serine residues. Investigations of the structure and intracellular transport of the mutant proteins indicate that (a) cysteine residues in the ectodomain are essential both for efficient folding of HA and for stabilization of the folded molecule; (b) cysteine residues in the globular portion of the ectodomain are likely to form native disulfide bonds rapidly and directly, without involvement of intermediate, nonnative linkages; and (c) cysteine residues in the stalk portion of the ectodomain also appear not to form intermediate disulfide bonds, even though they have the opportunity to do so, being separated from their correct partners by hundreds of amino acids including two or more other sulfhydryl residues. We propose a role for the cellular protein BiP in shielding the cysteine residues of the stalk domain during the folding process, thus preventing them from forming intermediate, nonnative disulfide bonds.     

Identification and quantification of S-nitrosylation by cysteine reactive tandem mass tag switch assay

Redox-switches are critical cysteine thiols that are modified in response to changes in the cell's environment conferring a functional effect. S-nitrosylation (SNO) is emerging as an important modulator of these regulatory switches; however, much remains unknown about the nature of these specific cysteine residues and how oxidative signals are interpreted. Because of their labile nature, SNO-modifications are routinely detected using the biotin switch assay. Here, a new isotope coded cysteine thiol-reactive multiplex reagent, cysTMT(6), is used in place of biotin, for the specific detection of SNO-modifications and determination of individual protein thiol-reactivity. S-nitrosylation was measured in human pulmonary arterial endothelia cells in vitro and in vivo using the cysTMT(6) quantitative switch assay coupled with mass spectrometry. Cell lysates were treated with S-nitrosoglutathione and used to identify 220 SNO-modified cysteines on 179 proteins. Using this approach it was possible to discriminate potential artifacts including instances of reduced protein disulfide bonds (6) and S-glutathionylation (5) as well as diminished ambiguity in site assignment. Quantitative analysis over a range of NO-donor concentrations (2, 10, 20 μm; GSNO) revealed a continuum of reactivity to SNO-modification. Cysteine response was validated in living cells, demonstrating a greater number of less sensitive cysteine residues are modified with increasing oxidative stimuli. Of note, the majority of available cysteines were found to be unmodified in the current treatment suggesting significant additional capacity for oxidative modifications. These results indicate a possible mechanism for the cell to gauge the magnitude of oxidative stimuli through the progressive and specific accumulation of modified redox-switches.     

Copper dependence of the biotin switch assay: modified assay for measuring cellular and blood nitrosated proteins

Studies have shown that modification of critical cysteine residues in proteins leads to the regulation of protein function. These modifications include disulfide bond formation, glutathionylation, sulfenic and sulfinic acid formation, and S-nitrosation. The biotin switch assay was developed to specifically detect protein S-nitrosation (S. R. Jaffrey et al., Nat. Cell Biol. 3:193-197; 2001). In this assay, proteins are denatured with SDS in the presence of methyl methane thiosulfonate (MMTS) to block free thiols. After acetone precipitation or Sephadex G25 separation to remove excess MMTS, HPDP-biotin and 1 mM ascorbate are added to reduce the S-nitrosothiol bonds and label the reduced thiols with biotin. The proteins are then separated by nonreducing SDS PAGE and detected using either streptavidin-HRP or anti-biotin-HRP conjugate. Our examination of this labeling scheme has revealed that the extent of labeling depends on the buffer composition and, importantly, on the choice of metal-ion chelator (DTPA vs EDTA). Unexpectedly, using purified S-nitrosated albumin, we have found that "contaminating" copper is required for the ascorbate-dependent degradation of S-nitrosothiol; this is consistent with the fact that ascorbate itself does not rapidly reduce S-nitrosothiols. Removal of copper from buffers by DTPA and other copper chelators preserves approximately 90% of the S-nitrosothiol, whereas the inclusion of copper and ascorbate completely eliminates the S-nitrosothiol in the preparation and increases the specific biotin labeling. These biotin switch experiments were confirmed using triiodide-based and copper-based reductive chemiluminescence. Additional modifications of the assay using N-ethylmaleimide for thiol blockade, ferricyanide pretreatment to stabilize S-nitrosated hemoglobin, and cyanine dye labeling instead of biotin are presented for the measurement of cellular and blood S-nitrosothiols. These results indicate that degradation of S-nitrosothiol in the standard biotin switch assay is metal-ion dependent and that experimental variability in S-nitrosothiol yields using this assay occurs secondary to the inclusion of metal-ion chelators in reagents and variable metal-ion contamination of buffers and labware. The addition of copper to ascorbate allows for a simple assay modification that dramatically increases sensitivity while maintaining specificity.     

S-linked protein homocysteinylation: identifying targets based on structural, physicochemical and protein–protein interactions of homocysteinylated proteins

An elevated level of homocysteine, a thiol-containing amino acid is associated with a wide spectrum of disease conditions. A majority (>80 %) of the circulating homocysteine exist in protein-bound form. Homocysteine can bind to free cysteine residues in the protein or could cleave accessible cysteine disulfide bonds via thiol disulfide exchange reaction. Binding of homocysteine to proteins could potentially alter the structure and/or function of the protein. To date only 21 proteins have been experimentally shown to bind homocysteine. In this study we attempted to identify other proteins that could potentially bind to homocysteine based on the criteria that such proteins will have significant 3D structural homology with the proteins that have been experimentally validated and have solvent accessible cysteine residues either with high dihedral strain energy (for cysteine–cysteine disulfide bonds) or low pKa (for free cysteine residues). This analysis led us to the identification of 78 such proteins of which 68 proteins had 154 solvent accessible disulfide cysteine pairs with high dihedral strain energy and 10 proteins had free cysteine residues with low pKa that could potentially bind to homocysteine. Further, protein–protein interaction network was built to identify the interacting partners of these putative homocysteine binding proteins. We found that the 21 experimentally validated proteins had 174 interacting partners while the 78 proteins identified in our analysis had 445 first interacting partners. These proteins are mainly involved in biological activities such as complement and coagulation pathway, focal adhesion, ECM-receptor, ErbB signalling and cancer pathways, etc. paralleling the disease-specific attributes associated with hyperhomocysteinemia.     

High throughput screening of disulfide‐containing proteins in a complex mixture

The formation of disulfide bonds between cysteine residues is crucial for the stabilization of native protein structures and, thus, determination of disulfide linkages is an important facet of protein structural characterization. Nonetheless, the identification of disulfide bond linkages remains a significant analytical challenge, particularly in large proteins with complex disulfide patterns. Herein, we have developed a new LC/MS strategy for rapid screening of disulfides in an intact protein mixture after a straightforward reduction step with tris(2‐carboxyethyl)phosphine. LC/MS analysis of reduced and nonreduced protein mixtures quickly revealed disulfide‐containing proteins owing to a 2 Da mass increase per disulfide reduction and, subsequently, the total number of disulfide bonds in the intact proteins could be determined. We have demonstrated the effectiveness of this method in a protein mixture composed of both disulfide‐containing and disulfide‐free proteins. Our method is simple (no need for proteolytic digestion, alkylation, or the removal of reducing agents prior to MS analysis), high throughput (fast on‐line LC/MS analysis), and reliable (no S–S scrambling), underscoring its potential as a rapid disulfide screening method for proteomics applications.     

Sulfhydryl oxidase-catalyzed formation of disulfide bonds in reduced ribonuclease

Sulfhydryl oxidase isolated from bovine skim milk membrane vesicles catalyzes de novo formation of disulfide bonds with the substrates cysteine, cysteine-containing peptides, and reduced proteins using molecular oxygen as the electron acceptor. Initial rates for sulfhydryl oxidase-catalyzed oxidation of reduced ribonuclease exhibited typical Michaelis-Menten kinetics at low substrate concentrations. Substrate inhibition of the oxidative activity was observed at ribonuclease concentrations greater than 40 microM, similar to that observed with reduced glutathione or other small thiol substrates. The inhibition was more pronounced when ribonuclease activity was used to monitor the rates, presumably due to concentration-dependent formation of nonnative disulfide bonds. Thus, a maximum in the rate of regain of ribonuclease activity was observed at a 40 microM concentration, while optimum recovery was observed at 30 microM. The Michaelis constant obtained with reduced ribonuclease is 17.4 microM which corresponds to a sulfhydryl concentration of 0.14 mM, a value that compares favorably with the best small thiol substrate, reduced glutathione. Disulfide-containing intermediates in the oxidation pathway, as determined by ion-exchange chromatography of alkylated reaction mixtures, appeared to be similar for air oxidation and enzyme-catalyzed oxidation of the protein. The pH optimum, tissue location, and kinetic characteristics of sulfhydryl oxidase are compatible with a suggested physiological function of direct catalysis of disulfide bond formation in secretory proteins or indirect participation through provision of oxidized glutathione for protein disulfide-isomerase-catalyzed thiol/disulfide interchange.     

Conformational stability and activity of ribonuclease T1 with zero, one, and two intact disulfide bonds

Ribonuclease T1 has two disulfide bonds linking cysteine residues 2-10 and 6-103. We have prepared a derivative of ribonuclease T1 in which one disulfide bond is broken and the cysteine residues carboxymethylated, (2-10)-RCM-T1, and three derivatives in which both disulfides are broken and the cysteine residues reduced, R-T1, carboxamidomethylated, RCAM-T1, or carboxymethylated, RCM-T1. The RNA hydrolyzing activity of these proteins has been measured, and urea and thermal denaturation studies have been used to determine conformational stability. The activity, melting temperature, and conformational stability of the proteins are: ribonuclease T1 (100%, 59.3 degrees C, 10.2 kcal/mol), (2-10)-RCM-T1 (86%, 53.3 degrees C, 6.8 kcal/mol), R-T1 (53%, 27.2 degrees C, 3.0 kcal/mol), RCAM-T1 (43%, 21.2 degrees C, 1.5 kcal/mol), and RCM-T1 (35%, 16.6 degrees C, 0.9 kcal/mol). Thus, the conformational stability is decreased by 3.4 kcal/mol when one disulfide bond is broken and by 7.2-9.3 kcal/mol when both disulfide bonds are broken. It is quite remarkable that RNase T1 can fold and function with both disulfide bonds broken and the cysteine residues carboxymethylated. The large decrease in the stability is due mainly to an increase in the conformational entropy of the unfolded protein which results when the constraints of the disulfide bonds on the flexibility are removed. We propose a new equation for predicting the effect of a cross-link on the conformational entropy of a protein: delta Sconf = -2.1 - (3/2)R 1n n, where n is the number of residues between the side chains which are cross-linked. This equation gives much better agreement with experimental results than other forms of this equation which have been used previously.     

Analysis and separation of residues important for the chemoattractant and antimicrobial activities of beta-defensin 3

beta-Defensins are important in mammalian immunity displaying both antimicrobial and chemoattractant activities. Three canonical disulfide intramolecular bonds are believed to be dispensable for antimicrobial activity but essential for chemoattractant ability. However, here we show that HBD3 (human beta-defensin 3) alkylated with iodoactemide and devoid of any disulfide bonds is still a potent chemoattractant. Furthermore, when the canonical six cysteine residues are replaced with alanine, the peptide is no longer active as a chemoattractant. These findings are replicated by the murine ortholog Defb14. We restore the chemoattractant activity of Defb14 and HBD3 by introduction of a single cysteine in the fifth position (Cys V) of the beta-defensin six cysteine motif. In contrast, a peptide with a single cysteine at the first position (Cys I) is inactive. Moreover, a range of overlapping linear fragments of Defb14 do not act as chemoattractants, suggesting that the chemotactic activity of this peptide is not dependent solely on an epitope surrounding Cys V. Full-length peptides either with alkylated cysteine residues or with cysteine residues replaced with alanine are still strongly antimicrobial. Defb14 peptide fragments were also tested for antimicrobial activity, and peptides derived from the N-terminal region display potent antimicrobial activity. Thus, the chemoattractant and antimicrobial activities of beta-defensins can be separated, and both of these functions are independent of intramolecular disulfide bonds. These findings are important for further understanding of the mechanism of action of defensins and for therapeutic design.     

Paired natural cysteine mutation mapping: aid to constraining models of protein tertiary structure.

This paper discusses the benefit of mapping paired cysteine mutation patterns as a guide to identifying the positions of protein disulfide bonds. This information can facilitate the computer modeling of protein tertiary structure. First, a simple, paired natural-cysteine-mutation map is presented that identifies the positions of putative disulfide bonds in protein families. The method is based on the observation that if, during the process of evolution, a disulfide-bonded cysteine residue is not conserved, then it is likely that its counterpart will also be mutated. For each target protein, protein databases were searched for the primary amino acid sequences of all known members of distinct protein families. Primary sequence alignment was carried out using PileUp algorithms in the GCG package. To search for correlated mutations, we listed only the positions where cysteine residues were highly conserved and emphasized the mutated residues. In proteins of known three-dimensional structure, a striking pattern of paired cysteine mutations correlated with the positions of known disulfide bridges. For proteins of unknown architecture, the mutation maps showed several positions where disulfide bridging might occur.     

Methylthioadenosine phosphorylase from the archaeon Pyrococcus furiosus. Mechanism of the reaction and assignment of disulfide bonds.

The extremely heat-stable 5'-methylthioadenosine phosphorylase from the hyperthermophilic archaeon Pyrococcus furiosus was cloned, expressed to high levels in Escherichia coli, and purified to homogeneity by heat precipitation and affinity chromatography. The recombinant enzyme was subjected to a kinetic analysis including initial velocity and product inhibition studies. The reaction follows an ordered Bi-Bi mechanism and phosphate binding precedes nucleoside binding in the phosphorolytic direction. 5'-Methylthioadenosine phosphorylase from Pyrococcus furiosus is a hexameric protein with five cysteine residues per subunit. Analysis of the fragments obtained after digestion of the protein alkylated without previous reduction identified two intrasubunit disulfide bridges. The enzyme is very resistant to chemical denaturation and the transition midpoint for guanidinium chloride-induced unfolding was determined to be 3.0 M after 22 h incubation. This value decreases to 2.0 M in the presence of 30 mM dithiothreitol, furnishing evidence that disulfide bonds are needed for protein stability. The guanidinium chloride-induced unfolding is completely reversible as demonstrated by the analysis of the refolding process by activity assays, fluorescence measurements and SDS/PAGE. The finding of multiple disulfide bridges in 5'-methylthioadenosine phosphorylase from Pyrococcus furiosus argues strongly that disulfide bond formation may be a significant molecular strategy for stabilizing intracellular hyperthermophilic proteins.     

In situ maleimide bridging of disulfides and a new approach to protein PEGylation

The introduction of non-natural entities into proteins by chemical modification has numerous applications in fundamental biological science and for the development and manipulation of peptide and protein therapeutics. The reduction of native disulfide bonds provides a convenient method to access two nucleophilic cysteine residues that can serve as ideal attachment points for such chemical modification. The optimum bioconjugation strategy utilizing these cysteine residues should include the reconstruction of a bridge to mimic the role of the disulfide bond, maintaining structure and stability of the protein. Furthermore, the bridging chemical modification should be as rapid as possible to prevent problems associated with protein unfolding, aggregation, or disulfide scrambling. This study reports on an in situ disulfide reduction-bridging strategy that ensures rapid sequestration of the free cysteine residues in a bridge, using dithiomaleimides. This approach is then used to PEGylate the peptide hormone somatostatin and retention of biological activity is demonstrated.     

Characterization of the disulfide bonds and free cysteine residues of the Chlamydia trachomatis mouse pneumonitis major outer membrane protein

Members of the genus Chlamydia lack a peptidoglycan layer. As a substitute for peptidoglycan, it has been proposed that several cysteine rich proteins, including the major outer membrane protein (MOMP), form disulfide bonds to provide rigidity to the cell wall. Alignment of the amino acids sequences of the MOMP from various serovars of Chlamydia showed that they have from 7 to 10 cysteine residues and seven of them are highly conserved. Which of these are free cysteine residues and which are involved in disulfide bonds is unknown. The complexity of the outer membrane of Chlamydia precludes at this point the characterization of the structure of the cysteines directly in the bacteria. Therefore, mass spectrometric analysis of a purified and refolded MOMP was used in this study. Characterization of the structure of this preparation of the MOMP is critical because it has been shown, in an animal model, to be a very effective vaccine against respiratory and genital infections. Here, we demonstrated that in this MOMP preparation four cysteines are involved in disulfide bonds, with intramolecular pairs formed between Cys(48) and Cys(55) and between Cys(201) and Cys(203). A stepwise alkylation, reduction, alkylation process using two different alkylating reagents was required to establish the Cys(48)-Cys(55) disulfide pair. The other residues in MOMP, Cys(51), Cys(136), Cys(226), and Cys(351), are free cysteines and could potentially form disulfide-linked complexes with other MOMP or other membrane proteins.     

Disulphide bond formation in food protein aggregation and gelation

In this short review we discuss the role of cysteine residues and cystine bridges for the functional aggregation of food proteins. We evaluate how formation and cleavage of disulphide bonds proceeds at a molecular level, and how inter- and intramolecular disulfide bonds can be detected and modified. The differences between heat-, high-pressure-, and denaturant-induced unfolding and aggregation are discussed. The effect of disulphide bonding between aggregates of proteins and protein mixtures on the functional macroscopic properties of space filling networks in protein gels is briefly presented.     

Analysis of nitrated proteins by nitrotyrosine-specific affinity probes and mass spectrometry

Tyrosine nitration is a well-established protein modification that occurs in disease states associated with oxidative stress and increased nitric oxide synthase activity. Nitration of specific tyrosine residues has been reported to affect protein structure and function, suggesting that 3-nitrotyrosine formation may not only be a disease marker but may also be involved in the pathogenesis of some diseases and in normal regulatory processes. It has been, however, difficult to identify sites of nitration. We describe a method that combines specific isolation of nitrated proteins with mass spectrometric determination of the amino acid sequence and the site of nitration of individual proteins. A complex protein mixture, e.g., serum or cell lysate, was enriched for nitrotyrosine-containing proteins by immunoprecipitation with antinitrotyrosine antibodies. The nitrotyrosines were then reduced to aminotyrosines with a strong reducing agent in parallel in-gel and in-solution procedures. Using nitrated human serum albumin as a model, we reduced the disulfide bonds with dithiothreitol and alkylated the free sulfhydryl groups with iodoacetamide. The nitrotyrosines were next reduced to aminotyrosines with sodium dithionite, and-at pH 5.0-cleavable biotin tags were selectively attached to the aminotyrosines and the albumin was then digested with trypsin. The biotinylated tryptic peptides were purified on a streptavidin affinity column and identified by mass spectrometry. We have also purified nitrated human serum albumin from an enriched sample of SJL mouse plasma and confirmed its identity by peptide mass fingerprinting and MASCOT.     

2,2'-Bispyridyl disulfide rapidly induces intramolecular disulfide bonds in peptides.

A linear peptide containing two reduced cysteine residues can be rapidly converted to its oxidized cyclic form containing an intramolecular disulfide bond by adding an excess of 2,2'-bispyridyl disulfide (2,2'-dipyridyl disulfide or 2,2'-dithiodipyridine) to conventional buffer solutions. The reactants and products are easily separated by reverse-phase chromatography. This reaction will find wide application in forming intramolecular disulfide bonds because of its selectivity for free sulfhydryl groups, quickness, safety, and applicability under acidic conditions.