Surface sensing and stress-signalling in Ulva and fouling diatoms – potential targets for antifouling: a review

Understanding the underlying signalling pathways that enable fouling algae to sense and respond to surfaces is essential in the design of environmentally friendly coatings. Both the green alga Ulva and diverse diatoms are important ecologically and economically as they are persistent biofoulers. Ulva spores exhibit rapid secretion, allowing them to adhere quickly and permanently to a ship, whilst diatoms secrete an abundance of extracellular polymeric substances (EPS), which are highly adaptable to different environmental conditions. There is evidence, now supported by molecular data, for complex calcium and nitric oxide (NO) signalling pathways in both Ulva and diatoms being involved in surface sensing and/or adhesion. Moreover, adaptation to stress has profound effects on the biofouling capability of both types of organism. Targets for future antifouling coatings based on surface sensing are discussed, with an emphasis on pursuing NO-releasing coatings as a potentially universal antifouling strategy.     

Microfluidic accumulation assay probes attachment of biofilm forming diatom cells

Testing of fouling release (FR) technologies is of great relevance for discovery of the next generation of protective marine coatings. In this paper, an accumulation assay to test diatom interaction under laminar flow with the model organism Navicula perminuta is introduced. Using time lapse microscopy with large area sampling allows determination of the accumulation kinetics of the diatom on three model surfaces with different surface properties at different wall shear stresses. The hydrodynamic conditions within the flow cell are described and a suitable shear stress range to perform accumulation experiments is identified at which statistically significant discrimination of surfaces is possible. The observed trends compare well to published adhesion preferences of N. perminuta. Also, previously determined trends of critical wall shear stresses required for cell removal from the same set of functionalized interfaces shows consistent trends. Initial attachment mediated by extracellular polymeric substances (EPS) present outside the diatoms leads to the conclusion that the FR potential of the tested coating candidates can be deducted from dynamic accumulation experiments under well-defined hydrodynamic conditions. As well as testing new coating candidates for their FR properties, monitoring of the adhesion process under flow provides additional information on the mechanism and geometry of attachment and the population kinetics.     

Structure and carbohydrate analysis of the exopolysaccharide capsule of Pseudomonas putida G7

The aromatic hydrocarbon-degrading bacterium, Pseudomonas putida G7, produces exopolymers of potential interest in biotechnological applications. These exopolymers have been shown to have significant metal-binding ability . To initiate the study of the metal–polymer interactions, we explored the physical and chemical nature of the P. putida G7 exopolysaccharide, a major component of the exopolymer. A capsular structure was observed by light microscopy surrounding both planktonic and attached cells in biofilms after immunofluorescence staining with polyclonal antiserum raised against planktonic cells. Further work with planktonic cells showed that the immunostained capsule remained associated with young (log phase) cells, whereas older (stationary phase) cells lost their capsular material to the external milieu. Visualization of frozen, hydrated stationary phase cells by cryo-field emission scanning electron microscopy (cryoFESEM) revealed highly preserved extracellular material. In contrast, conventional scanning electron microscopy (SEM) of stationary phase cells showed rope-like material that most probably results from dehydrated and collapsed exopolymer. Both capsular and released exopolymers were separated from cells, and the released extracellular polysaccharide (EPS) was purified. Deoxycholate–polyacrylamide gel electrophoresis (PAGE) and silver/alcian blue staining of the partially purified material showed that it contained both EPS and lipopolysaccharide (LPS). Further purification of the EPS using a differential solubilization technique to remove LPS yielded highly purified EPS. Gas chromatography–mass spectrometry revealed that the purified EPS contained the monosaccharides, glucose, rhamnose, ribose, N-acetylgalactosamine and glucuronic acid. The structural and chemical properties of the P. putida EPS described here increase our understanding of the mechanisms of toxic metal binding by this well-known Proteobacterium.     

Biomimetic characterisation of key surface parameters for the development of fouling resistant materials

Material science provides a direct route to developing a new generation of non-toxic, surface effect-based antifouling technologies with applications ranging from biomedical science to marine transport. The surface topography of materials directly affects fouling resistance and fouling removal, the two key mechanisms for antifouling technologies. However, the field is hindered by the lack of quantified surface characteristics to guide the development of new antifouling materials. Using a biomimetic approach, key surface parameters are defined and quantified and correlated with fouling resistance and fouling removal from the shells of marine molluscs. Laser scanning confocal microscopy was used to acquire images for quantitative surface characterisation using three-dimensional surface parameters, and field assays correlated these with fouling resistance and fouling release. Principle component analysis produced a major component (explaining 54% of total variation between shell surfaces) that correlated with fouling resistance. The five surface parameters positively correlated to increased fouling resistance were, in order of importance, low fractal dimension, high skewness of both the roughness and waviness profiles, higher values of isotropy and lower values of mean surface roughness. The second component (accounting for 20% of variation between shells) positively correlated to fouling release, for which higher values of mean waviness almost exclusively dictated this relationship. This study provides quantified surface parameters to guide the development of new materials with surface properties that confer fouling resistance and release.     

Biomimetic characterisation of key surface parameters for the development of fouling resistant materials

Material science provides a direct route to developing a new generation of non-toxic, surface effect-based antifouling technologies with applications ranging from biomedical science to marine transport. The surface topography of materials directly affects fouling resistance and fouling removal, the two key mechanisms for antifouling technologies. However, the field is hindered by the lack of quantified surface characteristics to guide the development of new antifouling materials. Using a biomimetic approach, key surface parameters are defined and quantified and correlated with fouling resistance and fouling removal from the shells of marine molluscs. Laser scanning confocal microscopy was used to acquire images for quantitative surface characterisation using three-dimensional surface parameters, and field assays correlated these with fouling resistance and fouling release. Principle component analysis produced a major component (explaining 54% of total variation between shell surfaces) that correlated with fouling resistance. The five surface parameters positively correlated to increased fouling resistance were, in order of importance, low fractal dimension, high skewness of both the roughness and waviness profiles, higher values of isotropy and lower values of mean surface roughness. The second component (accounting for 20% of variation between shells) positively correlated to fouling release, for which higher values of mean waviness almost exclusively dictated this relationship. This study provides quantified surface parameters to guide the development of new materials with surface properties that confer fouling resistance and release.     

IR study of self-assembly of capsular exopolymers from Pseudomonas sp. NCIMB 2021 on hydrophilic and hydrophobic surfaces

Capsular exopolymers (EPS) of the bacterium Pseudomonas sp. NCIMB 2021 are allowed to self-assemble on hydrophilic and hydrophobic gold surfaces. Tapping mode atomic force microscopy confirms the differences in the surface topography between EPS adsorbed on both surfaces. Fourier-transform IR spectroscopy indicates that the EPS surface coverage is much greater on the hydrophobic surface. Furthermore, an increased contribution is observed from hydrophobic (i.e., methyl and tyrosyl residues) and electrostatic (i.e., carboxylate residues) groups at the hydrophobic surface, but there is relatively less neutral polymer compared to the hydrophilic surface. The behavior of this EPS is in agreement with the behavior of cells of Pseudomonas sp. NCIMB 2021 at hydrophilic and hydrophobic surfaces.     

The potential for translocation of marine species via small-scale disruptions to antifouling surfaces

Vessel hull fouling is a major vector for the translocation of nonindigenous species (NIS). Antifouling (AF) paints are the primary method for preventing the establishment and translocation of fouling species. However, factors such as paint age, condition and method of application can all reduce the effectiveness of these coatings. Areas of hull that escape AF treatment (through limited application or damage) constitute key areas that may be expected to receive high levels of fouling. The investigation focused on whether small-scale (mm(2) to cm(2)) areas of unprotected surface or experimental 'scrapes' provided sufficient area for the formation of fouling assemblages within otherwise undamaged AF surfaces. Recruitment of fouling taxa such as algae, spirorbids and hydroids was recorded on scrapes as narrow as 0.5 cm wide. The abundance and species richness of fouling assemblages developing on scrapes > or =1 cm often equalled or surpassed levels observed in reference assemblages totally unprotected by AF coatings. Experiments were conducted at three sites within the highly protected and isolated marine park surrounding Lady Elliott Island at the southernmost tip of the Great Barrier Reef, Australia. Several NIS were recorded on scrapes of AF coated surfaces at this location, with 1-cm scrapes showing the greatest species richness and abundance of NIS relative to all other treatments (including controls) at two of the three sites investigated. Slight disruptions to newly antifouled surfaces may be all that is necessary for the establishment of fouling organisms and the translocation of a wide range of invasive taxa to otherwise highly protected marine areas.     

The potential for translocation of marine species via small-scale disruptions to antifouling surfaces

Vessel hull fouling is a major vector for the translocation of nonindigenous species (NIS). Antifouling (AF) paints are the primary method for preventing the establishment and translocation of fouling species. However, factors such as paint age, condition and method of application can all reduce the effectiveness of these coatings. Areas of hull that escape AF treatment (through limited application or damage) constitute key areas that may be expected to receive high levels of fouling. The investigation focused on whether small-scale (mm² to cm²) areas of unprotected surface or experimental ‘scrapes’ provided sufficient area for the formation of fouling assemblages within otherwise undamaged AF surfaces. Recruitment of fouling taxa such as algae, spirorbids and hydroids was recorded on scrapes as narrow as 0.5 cm wide. The abundance and species richness of fouling assemblages developing on scrapes ≥1 cm often equalled or surpassed levels observed in reference assemblages totally unprotected by AF coatings. Experiments were conducted at three sites within the highly protected and isolated marine park surrounding Lady Elliott Island at the southernmost tip of the Great Barrier Reef, Australia. Several NIS were recorded on scrapes of AF coated surfaces at this location, with 1-cm scrapes showing the greatest species richness and abundance of NIS relative to all other treatments (including controls) at two of the three sites investigated. Slight disruptions to newly antifouled surfaces may be all that is necessary for the establishment of fouling organisms and the translocation of a wide range of invasive taxa to otherwise highly protected marine areas.     

Fractionation of proteins and carbohydrates of extracellular polymeric substances in a membrane bioreactor system

The major operational problem associated with membrane bioreactors (MBR) is membrane fouling, for which extracellular polymeric substances (EPS) are primarily responsible. In this work both the soluble and bound EPS (i.e. SMP and EPS) produced in an MBR system operating under sludge retention times (SRT) of 10, 15, 20 and 33 days were fractionized by means of membranes having variable molecular weight cutoffs (300 kDa, 100 kDa, 10 kDa & 1 kDa). The results show that increasing the SRT leads to a reduction of SMP and EPS and that these reductions are more pronounced for the SRTs in the range 10–20 days. This reduction is more significant for carbohydrates than for proteins. The decrease of SMP and EPS with increasing SRT from 10 to 20 days led to a significant decrease of the level of fouling. The further increase of SRT to 33 days did not significantly impact on the level of fouling as the SMP and EPS concentrations did not change much.     

The role of nano-roughness in antifouling

Nano-engineered superhydrophobic surfaces have been investigated for potential fouling resistance properties. Integrating hydrophobic materials with nanoscale roughness generates surfaces with superhydrophobicity that have water contact angles (θ) >150° and concomitant low hysteresis (<10°). Three superhydrophobic coatings (SHCs) differing in their chemical composition and architecture were tested against major fouling species (Amphora sp., Ulva rigida, Polysiphonia sphaerocarpa, Bugula neritina, Amphibalanus amphitrite) in settlement assays. The SHC which had nanoscale roughness alone (SHC 3) deterred the settlement of all the tested fouling organisms, compared to selective settlement on the SHCs with nano- and micro-scale architectures. The presence of air incursions or nanobubbles at the interface of the SHCs when immersed was characterized using small angle X-ray scattering, a technique sensitive to local changes in electron density contrast resulting from partial or complete wetting of a rough interface. The coating with broad spectrum antifouling properties (SHC 3) had a noticeably larger amount of unwetted interface when immersed, likely due to the comparatively high work of adhesion (60.77 mJ m^?2 for SHC 3 compared to 5.78 mJ m^?2 for the other two SHCs) required for creating solid/liquid interface from the solid/vapour interface. This is the first example of a non-toxic, fouling resistant surface against a broad spectrum of fouling organisms ranging from plant cells and non-motile spores, to complex invertebrate larvae with highly selective sensory mechanisms. The only physical property differentiating the immersed surfaces is the nano-architectured roughness which supports longer standing air incursions providing a novel non-toxic broad spectrum mechanism for the prevention of biofouling.     

Isolation and characterization of environmental bacteria capable of extracellular biosorption of mercury

Accumulation of toxic metals in the environment represents a public health and wildlife concern. Bacteria resistant to toxic metals constitute an attractive biomass for the development of systems to decontaminate soils, sediments, or waters. In particular, biosorption of metals within the bacterial cell wall or secreted extracellular polymeric substances (EPS) is an emerging process for the bioremediation of contaminated water. Here the isolation of bacteria from soil, effluents, and river sediments contaminated with toxic metals permitted the selection of seven bacterial isolates tolerant to mercury and associated with a mucoid phenotype indicative of the production of EPS. Inductively coupled plasma-optical emission spectroscopy and transmission electron microscopy in conjunction with X-ray energy dispersive spectrometry revealed that bacteria incubated in the presence of HgCl2 sequestered mercury extracellularly as spherical or amorphous deposits. Killed bacterial biomass incubated in the presence of HgCl2 also generated spherical extracellular mercury deposits, with a sequestration capacity (40 to 120 mg mercury per g [dry weight] of biomass) superior to that of live bacteria (1 to 2 mg mercury per g [dry weight] of biomass). The seven strains were shown to produce EPS, which were characterized by Fourier transform-infrared (FT-IR) spectroscopy and chemical analysis of neutral-carbohydrate, uronic acid, and protein contents. The results highlight the high potential of Hg-tolerant bacteria for applications in the bioremediation of mercury through biosorption onto the biomass surface or secreted EPS.     

Screening of Marine Algal Extracts for Anti-settlement Activities against Microalgae and Macroalgae

The ban on the use of TBT-based antifouling paints for boats under 25 m in length has lead to a search for new non-toxic antifoulants. One of the most promising alternative technologies to heavy metal based antifouling paint is the development of antifouling coatings whose active ingredients are naturally occurring compounds from marine organisms. This is based on the principle that marine organisms also face the problem of the presence of epibionts on their own surfaces. In this study, the antifouling activity of a series of aqueous, ethanolic and dichloromethane extracts from thirty algae from the North East Atlantic coast was investigated. The extracts were tested in laboratory assays against species representative of two major groups of fouling organisms, viz . macroalgae and microalgae. The activity of several extracts was comparable to that of heavy metals and biocides (such as TBTO and CuSO 4 ) currently used in antifouling paints and their lack of toxicity with respect to the larvae of oysters and sea urchins suggests a potential for novel active ingredients.     

Correlating membrane fouling with sludge characteristics in membrane bioreactors: an especial interest in EPS and sludge morphology analysis

Two submerged membrane bioreactors were operated for a period of 3 months to study the filtration behavior of normal sludge and bulking sludge. Comparison of sludge morphology and bound extracellular polymeric substances (EPS) from the two systems was made to elucidate the different filtration characteristics. Experimental results showed that the membrane fouling behavior induced by bulking sludge was more severe than normal sludge. Concomitantly, the adsorption tests and atomic force microscopy observation confirmed that the EPS properties played an important role in membrane adsorption, eventually causing the different fouling behavior. Correlations between image analysis information and diluted sludge volume index (DSVI) have been identified. The combinations of EFLI/FAI (the ratio between extended filamentous lengths and floc area), from factor and floc elongation related parameters (aspect ratio or roundness) were the preferred input candidates in autoregressive exogenous model to describe the filamentous bulking phenomena, which aided in predicting membrane fouling.     

藻源污染物特性对高藻水微滤处理过程中膜污染的影响

采用不同生长时期的藻细胞、藻源型有机物(AOM)及原藻液进行过滤实验,研究不同生长时期的藻源污染物对膜污染的影响特性及机制。利用UMFI法分析不同生长时期的藻细胞、AOM及原藻液的污染程度;采用CRITIC分析法定量分析了不同生长时期的AOM和藻细胞在混合过滤过程中对膜污染的贡献率,同时采用混合污染堵塞模型分析了不同生长时期的原藻液不同过滤阶段的主要污染堵塞类型。结果表明, 3个生长时期的藻细胞及AOM的膜污染程度均为对数期最轻;值得注意的是,在原藻液过滤过程中藻细胞及AOM的膜污染贡献率随着生长时期的不同而有所变化,其中AOM的污染权重随着生长时期的延长不断减小,而藻细胞的污染权重随着生长时期的延长不断增大。不同生长时期的原藻液过滤过程中均呈现两段式污染堵塞类型,并且后段均为滤饼堵塞。研究不仅阐明了藻源型污染物特性对微滤处理高藻水膜污染的影响机制,同时也为改善膜污染的技术开发提供参考。     

Toxic and non-toxic Nodularia strains can be distinguished from each other and from eukaryotic algae with chlorophyll fluorescence fingerprinting

Chlorophyll fluorescence induction curves of toxic and non-toxic strains of the cyanobacterium Nodularia were measured and compared with fluorescence curves measured from four species of eukaryotic algae. Both cyanobacteria and algae were isolated from the Baltic Sea. The results show that Nodularia strains can be distinguished from the eukaryotes by applying a pattern recognition procedure to the fluorescence induction curves, suggesting that the fluorescence fingerprinting technique might be useful in environmental monitoring of marine algae. The six studied Nodularia strains could not be distinguished from each other from their fluorescence induction kinetics. However, their fluorescence curves fell into two clear categories, the toxic and the non-toxic Nodularia. Emission spectroscopy and differences in the fluorescence induction curves showed that the ratio of the intensity of the Photosystem I emission peak to the Photosystem II peak is higher in non-toxic Nodularia than in the toxic strains, suggesting that the toxicity affects the structure of the photosynthesis machinery. The effect on photosynthesis may be related to the ability of the microcystins to chelate iron.     

Amphiphilic triblock copolymers with PEGylated hydrocarbon structures as environmentally friendly marine antifouling and fouling-release coatings

The ideal marine antifouling (AF)/fouling-release (FR) coating should be non-toxic, while effectively either resisting the attachment of marine organisms (AF) or significantly reducing their strength of attachment (FR). Many recent studies have shown that amphiphilic polymeric materials provide a promising solution to producing such coatings due to their surface dual functionality. In this work, poly(ethylene glycol) (PEG) of different molecular weights (M_w?=?350, 550) was coupled to a saturated difunctional alkyl alcohol to generate amphiphilic surfactants (PEG-hydrocarbon-OH). The resulting macromolecules were then used as side chains to covalently modify a pre-synthesized PS₈?_K-b-P(E/B)₂₅?_K-b-PI₁₀?_K (SEBI or K3) triblock copolymer, and the final polymers were applied to glass substrata through an established multilayer surface coating technique to prepare fouling resistant coatings. The coated surfaces were characterized with AFM, XPS and NEXAFS, and evaluated in laboratory assays with two important fouling algae, Ulva linza (a green macroalga) and Navicula incerta, a biofilm-forming diatom. The results suggest that these polymer-coated surfaces undergo surface reconstruction upon changing the contact medium (polymer/air vs polymer/water), due to the preferential interfacial aggregation of the PEG segment on the surface in water. The amphiphilic polymer-coated surfaces showed promising results as both AF and FR coatings. The sample with longer PEG chain lengths (M_w?=?550?g?mol^?1) exhibited excellent properties against both algae, highlighting the importance of the chemical structures on ultimate biological performance. Besides reporting synthesis and characterization of this new type of amphiphilic surface material, this work also provides insight into the nature of PEG/hydrocarbon amphiphilic coatings, and this understanding may help in the design of future generations of fluorine-free, environmentally friendly AF/FR polymeric coatings.     

Microbial behaviors involved in cake fouling in membrane bioreactors under different solids retention times

Biomass characteristics and membrane performances in the MBRs operated at a high flux of 30 L/m² h under different SRTs (10, 30 days, and infinity) were monitored. Results showed that more serious cake-fouling happened in the SRT-infinity MBR, which correlated with the activated sludge characteristics such as smaller floc size and greater EPS amount. DGGE analysis indicated that the microbial community shifted in different ways under various SRTs, which also influenced EPS productions in the MBRs. Different microbial communities were developed on the membrane surfaces at various operating stages and SRTs. Possibly, the activated sludge characteristics (such as MLSS concentration, EPS properties) and hydrodynamic conditions influenced by the SRTs were associated with cake layer development and membrane fouling propensity. Insight into the EPS characteristics and deposition behaviors of bacterial flocs will be crucial to explore appropriate biofouling control strategies in MBRs.     

Interaction between Calcite and Phosphorus in Biomineralization Processes in Tufa Carbonates

Using electron microscopy techniques (SEM, LTSEM) coupled with analytical methods (XRD and EDS) the role of phosphorus has been assessed in the formation of freshwater calcite deposits (tufa) in a small pond of the Ruidera Lakes (Spain). Differences between the cell walls and sheaths of bacteria and eukaryotic algae as well as the existence of additional layers of extracellular polymeric substances (EPS) were features that lead to differences in the process of induced calcite biomineralization. Phosphorus has influence in the biomineralization of the EPS, sheaths and cell walls of cyanobacteria allowing for fossil preservation whereas does not participate in the calcite precipitation around algae and mosses. This variability may explain the different positive or negative roles played by natural or artificial inputs of phosphorus in hard water lakes and the different morphological features of calcite precipitates associated with eukaryotic and cyanobacteria picoplankton found in natural environments. The biomineralization observed is in agreement with the isotopic composition of the tufa layers that reflect the variations in environmental conditions around biological communities. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Physicochemical properties and membrane biofouling of extra-cellular polysaccharide produced by a Micrococcus luteus strain

The physicochemical properties of the extra-cellular polysaccharide (EPS) produced by a Micrococcus luteus strain, a dominating strain isolated from membrane biofouling layer, were determined in this study. The EPS isolated from this strain was measured to have an average molecular weight of 63,540 Da and some typical polysaccharide absorption peaks in Fourier transform infrared spectrum. Monosaccharide components of the EPS contained rhamnose, fucose, arabinose, xylose, mannose, galactose and glucose in a molar ratio of 0.2074:0.0454:0.0262:0.0446:1.7942:1.2086:0.4578. Pseudo plastic properties were also observed for the EPS through the rheological measurement. The EPS was further characterized for its behavior to cause membrane flux decline. The results showed that both flux declines for polyvinylidenefluoride (PVDF) and polypropylene membranes became more severe as EPS feed concentration increased. A higher irreversible fouling for the PVDF membrane suggested that the EPS had the larger fouling potential to this microfiltration membrane.     

Enhanced visualization of microbial biofilms by staining and environmental scanning electron microscopy

Bacterial biofilms, i.e. surface-associated cells covered in hydrated extracellular polymeric substances (EPS), are often studied with high-resolution electron microscopy (EM). However, conventional desiccation and high vacuum EM protocols collapse EPS matrices which, in turn, deform biofilm appearances. Alternatively, wet-mode environmental scanning electron microscopy (ESEM) is performed under a moderate vacuum and without biofilm drying. If completely untreated, however, EPS is not electron dense and thus is not resolved well in ESEM. Therefore, this study was towards adapting several conventional SEM staining protocols for improved resolution of biofilms and EPS using ESEM. Three different biofilm types were used: 1) Pseudomonas aeruginosa unsaturated biofilms cultured on membranes, 2) P. aeruginosa cultured in moist sand, and 3) mixed community biofilms cultured on substrates in an estuary. Working with the first specimen type, a staining protocol using ruthenium red, glutaraldehyde, osmium tetroxide and lysine was optimized for best topographic resolution. A quantitative image analysis tool that maps relief, newly adopted here for studying biofilms, was used to compare micrographs. When the optimized staining and ESEM protocols were applied to moist sand cultures and aquatic biofilms, the smoothening effect that bacterial biofilms have on rough sand, and the roughening that aquatic biofilms impart on initially smooth coupons, were each quantifiable. This study thus provides transferable staining and ESEM imaging protocols suitable for a wide range of biofilms, plus a novel tool for quantifying biofilm image data.