Transgene excision from wheat chromosomes by phage phiC31 integrase

The Streptomyces phage phiC31 integrase was tested for its ability to excise transgenic DNA from the wheat genome by site-specific recombination. Plants that stably express phiC31 integrase were crossed to plants carrying a target construct bearing the phiC31 recognition sites, attP and attB. In the progeny, phiC31 recombinase mediates recombination between the att sites of the target locus, which results in excision of the intervening DNA. Recombination events could be identified in 34 independent wheat lines by PCR and Southern blot analysis and by sequencing of the excision footprints. Recombinant loci were inherited to the subsequent generation. The results presented here establish the integrase-att system as a tool for catalysing the precise elimination of DNA sequences from wheat chromosomes.     

Expression of active <Emphasis Type="Italic">Streptomyces</Emphasis> phage phiC31 integrase in transgenic wheat plants

Site-specific recombination systems are becoming an important tool for the genetic modification of crop plants. Here we report the functional expression of the Streptomyces phage-derived phiC31 recombinase (integrase) in wheat. T-DNA constructs containing a phiC31 integrase transgene were stably transformed into wheat plants via particle gun bombardment. A plant-virus-based assay system was used to monitor the site-specific recombination activity of the recombinant integrase protein in vivo. We established several independent doubled haploid (DH) inbred lines that constitutively express an active integrase enzyme without any apparent detrimental effects on plant growth and development. The potential of phiC31 integrase expression in crop plants related to transgene control technologies or hybrid breeding systems is discussed. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. M. Rubtsova and K. Kempe contributed equally to the paper.     

Gene insertion and replacement in Schizosaccharomyces pombe mediated by the Streptomyces bacteriophage phiC31 site-specific recombination system

The site-specific recombination system used by the Streptomyces bacteriophage phiC31 was tested in the fission yeast Schizosaccharomyces pombe. A target strain with the phage attachment site attP inserted at the leu1 locus was co-transformed with one plasmid containing the bacterial attachment site attB linked to a ura4+ marker, and a second plasmid expressing the phiC31 integrase gene. High-efficiency transformation to the Ura+ phenotype occurred when the integrase gene was expressed. Southern analysis revealed that the attB-ura4+ plasmid integrated into the chromosomal attP site. Sequence analysis showed that the attBxattP recombination was precise. In another approach, DNA with a ura4+ marker flanked by two attB sites in direct orientation was used to transform S. pombe cells bearing an attP duplication. The phiC31 integrase catalyzed two reciprocal cross-overs, resulting in a precise gene replacement. The site-specific insertions are stable, as no excision (the reverse reaction) was observed on maintenance of the integrase gene in the integrant lines. The irreversibility of the phiC31 site-specific recombination system sets it apart from other systems currently used in eukaryotic cells, which reverse readily. Deployment of the phiC31 recombination provides new opportunities for directing transgene and chromosome rearrangements in eukaryotic systems.     

Cre/ lox site-specific recombination controls the excision of a transgene from the rice genome

The Cre/lox site-specific recombination controls the excision of a target DNA segment by recombination between two lox sites flanking it, mediated by the Cre recombinase. We have studied the functional expression of the Cre/lox system to excise a transgene from the rice genome. We developed transgenic plants carrying the target gene, hygromycin phosphotransferase (hpt) flanked by two lox sites and transgenic plants harboring the Cre gene. Each lox plant was crossed with each Cre plant reciprocally. In the Cre/lox hybrid plants, the Cre recombinase mediates recombination between two lox sites, resulting in excision of the hpt gene. The recombination event could be detected because it places the CaMV 35S promoter of the hpt gene adjacent to a promoterless gusA gene; as a result the gusA gene is activated and its expression could be visualized. In 73 Cre/lox hybrid plants from various crosses of T0 transgenic plants, 19 expressed GUS, and in 132 Cre/lox hybrid plants from crosses of T2 transgenic plants, 77 showed GUS expression. Molecular data proved the excision event occurred in all the GUS⁺ plants. Recombination occurred with high efficiency at the early germinal stage, or randomly during somatic development stages. Received. 2 April 2001 / Accepted: 29 June 2001     

Construction of transgenic Drosophila by using the site-specific integrase from phage phiC31

The phiC31 integrase functions efficiently in vitro and in Escherichia coli, yeast, and mammalian cells, mediating unidirectional site-specific recombination between its attB and attP recognition sites. Here we show that this site-specific integration system also functions efficiently in Drosophila melanogaster in cultured cells and in embryos. Intramolecular recombination in S2 cells on transfected plasmid DNA carrying the attB and attP recognition sites occurred at a frequency of 47%. In addition, several endogenous pseudo attP sites were identified in the fly genome that were recognized by the integrase and used as substrates for integration in S2 cells. Two lines of Drosophila were created by integrating an attP site into the genome with a P element. phiC31 integrase injected into embryos as mRNA functioned to promote integration of an attB-containing plasmid into the attP site, resulting in up to 55% of fertile adults producing transgenic offspring. A total of 100% of these progeny carried a precise integration event at the genomic attP site. These experiments demonstrate the potential for precise genetic engineering of the Drosophila genome with the phiC31 integrase system and will likely benefit research in Drosophila and other insects.     

phiC31-integrase-mediated, site-specific integration of transgenes in the silkworm, Bombyx mori (Lepidoptera: Bombycidae)

Transgenic silkworms can be useful for investigating the functions of genes in the post-genomic era. However, the common method of using a transposon as an insertion tool may result in the random integration of a foreign gene into the genome and suffer from a strong position effect. To overcome these problems, it is necessary to develop a site-specific integration system. It is known that phiC31 integrase has the capacity to mediate recombination between the target sequences attP and attB. To test the availability of site-specific integration in the silkworm, we first examined the efficiency of recombination between the target sites of the two plasmids in silkworm embryos and found that the frequency of recombination was very high. Then we constructed a host strain that possessed the target sequence attP using the common method. We injected the donor plasmid together with the phiC31 integrase mRNA into the embryos of the host strain and obtained positive lines. Structural analysis of the lines showed that site-specific integration occurred by recombination between the genomic attP site and the attB site of the donor plasmid. We can conclude from the results that phiC31 integrase has the ability to mediate the site-specific integration of transgenes into the silkworm chromosome.     

Targeted engineering of the Drosophila genome

The application of phiC31 phage integrase in Drosophila for unidirectional and site-specific DNA integration was pioneered by Groth et al. in 2004 1 and quickly triggered a wave of innovative tools taking advantage of these unique properties of phiC31. Three recent papers have further developed novel approaches that combine the phiC31-mediated DNA integration with the homologous recombination (HR)-based gene targeting 2 3 for the purpose of efficient and targeted modifications of Drosophila genomic loci. Despite significant differences, the general strategies are similar in principle in the SIRT (site-specific integrase mediated repeated targeting) approach by Gao et al. 4, the IMAGO (integrase-mediated approach for gene knock-out) approach by Choi et al. 5 and the genomic engineering approach developed by our group 6. All three use HR-based gene targeting to first implant a single or a pair of phiC31-attP recombination sites into the target locus. Flies carrying such targeted insertions of attP sites can then be used as "founder lines", in which modified DNA sequences ("knock-in DNA") can be repeatedly and efficiently inserted back into the target locus via phiC31-mediated integration. Thus, by carrying out the targeting experiments only once, one can then directedly and efficiently modify the target locus into virtually any desired knock-in allele. Here we give a brief overview of the SIRT, IMAGO, and genomic engineering approaches and propose a revised genomic engineering scheme in which a single ends-out targeting event will generate founder lines suitable for both recombinase-mediated cassette exchange (RMCE) and single-site based integration of knock-in DNA.     

An inducible constitutive expression system in Bombyx mori mediated by phiC31 integrase

Inducible gene-expression systems play important roles in gene functional assays in the post-genome era. Streptomyces phage-derived phiC31 integrase, which mediates an irreversible site-specific cassette exchange between the phage attachment site (attP) and the bacterial attachment site (attB), provides a promising option for the construction of a controllable gene-expression system. Here, we report a phiC31 integrase-mediated promoter flip system (FLIP) for the inducible expression of target genes in silkworm (Bombyx mori). First, we constructed a FLIP reporter system, in which a BmAct4 promoter with enhanced translational efficiency was flanked by the attB and attP sites in a head-to-head orientation and further linked in a reverse orientation to a DsRed reporter gene. The coexpression of a C-terminal modified phiC31-NLS integrase carrying a simian virus 40 (SV40) nuclear localization signal (NLS) effectively flipped the BmAct4 promoter through an attB/attP exchange, thereby activating the downstream expression of DsRed in a silkworm embryo-derived cell line, BmE. Subsequently, the FLIP system, together with a system continuously expressing the phiC31-NLS integrase, was used to construct binary transgenic silkworm lines. Hybridization between FLIP and phiC31-NLS transgenic silkworm lines resulted in the successful flipping of the BmAct4 promoter, with an approximately 39% heritable transformation efficiency in silkworm offspring, leading to the constitutive and high-level expression of DsRed in silkworms, which accounted for approximately 0.81% of the silkworm pupal weight. Our successful development of the FLIP system offers an effective alternative for manipulating gene expression in silkworms and other lepidopteran species.     

In vivo site-specific integration of transgene in silkworm via PhiC31 integrase-mediated cassette exchange

Current techniques for genetic engineering of the silkworm Bombyx mori genome utilize transposable elements, which result in positional effects and insertional mutagenesis through random insertion of exogenous DNA. New methods for introducing transgenes at specific positions are therefore needed to overcome the limitations of transposon-based strategies. Although site-specific recombination systems have proven powerful tools for genome manipulation in many organisms, their use has not yet been well established for the integration of transgenes in the silkworm. We describe a method for integrating target genes at pre-defined chromosomal sites in the silkworm via phiC31/att site-specific recombination system-mediated cassette exchange. Successful recombinase-mediated cassette exchange (RMCE) was observed in the two transgenic target strains with an estimated transformation efficiency of 3.84–7.01%. Our results suggest that RMCE events between chromosomal attP/attP target sites and incoming attB/attB sites were more frequent than those in the reciprocal direction. This is the first report of in vivo RMCE via phiC31 integrase in the silkworm, and thus represents a key step toward establishing genome manipulation technologies in silkworms and other lepidopteran species.     

Transgene excision in zebrafish using the phiC31 integrase

Genome engineering strategies employing site‐specific recombinases (SSRs) have become invaluable to the study of gene function in model organisms. One such SSR, the integrase encoded by the Streptomyces bacteriophage phiC31, promotes recombination between heterotypic attP and attB sites. In the present study I have examined the feasibility of the use of phiC31 integrase for intramolecular recombination strategies in zebrafish embryos. I report here that (1) phiC31 integrase is functional in zebrafish cells, (2) phiC31 integrase can excise a transgene cassette flanked by an attB and an attP site, analogous to a common use of the Cre/lox SSR system, (3) phiC31 integrase functions in the zebrafish germline, and (4) a phiC31 integrase‐estrogen receptor hormone‐binding domain variant fusion protein catalyzes attB‐attP recombination in zebrafish embryos in a 4‐hydroxytamoxifen‐dependent manner, albeit less efficiently than phiC31 alone. These features should make this a useful approach for genome manipulations in the zebrafish. genesis 48:137–143, 2010. © 2010 Wiley‐Liss, Inc.     

The elimination of a selectable marker gene in the doubled haploid progeny of co-transformed barley plants

Following the production of transgenic plants, the selectable marker gene(s) used in the process are redundant, and their retention may be undesirable. They can be removed by exploiting segregation among the progeny of co-transformants carrying both the selectable marker gene and the effector transgene. Here we show that the doubled haploid technology widely used in conventional barley breeding programmes represents a useful means of fixing a transgene, while simultaneously removing the unwanted selectable marker gene. Primary barley co-transformants involving hpt::gfp (the selectable marker) and gus (a model transgene of interest) were produced via Agrobacterium-mediated gene transfer to immature embryos using two respective T-DNAs. These plants were then subjected to embryogenic pollen culture to separate independently integrated transgenes in doubled haploid progeny. A comparison between 14 combinations, involving two Agrobacterium strains carrying various plasmids, revealed that the highest rate of independent co-transformation was achieved when a single Agrobacterium clone carried two binary vectors. Using this principle along with Agrobacterium strain LBA4404, selectable marker-free, gus homozygous lines were eventually obtained from 1.5 per 100 immature embryos inoculated. Compared to the segregation of uncoupled T-DNAs in conventionally produced progeny, the incorporation of haploid technology improves the time and resource efficiency of producing true-breeding, selectable marker-free transgenic barley.     

Mutational Analysis of Highly Conserved Residues in the Phage PhiC31 Integrase Reveals Key Amino Acids Necessary for the DNA Recombination

Background

Amino acid sequence alignment of phage phiC31 integrase with the serine recombinases family revealed highly conserved regions outside the catalytic domain. Until now, no system mutational or biochemical studies have been carried out to assess the roles of these conserved residues in the recombinaton of phiC31 integrase.

Methodology/Principal Findings

To determine the functional roles of these conserved residues, a series of conserved residues were targeted by site-directed mutagenesis. Out of the 17 mutants, 11 mutants showed impaired or no recombination ability, as analyzed by recombination assay both in vivo and in vitro. Results of DNA binding activity assays showed that mutants (R18A, I141A, L143A,E153A, I432A and V571A) exhibited a great decrease in DNA binding affinity, and mutants (G182A/F183A, C374A, C376A/G377A, Y393A and V566A) had completely lost their ability to bind to the specific target DNA attB as compared with wild-type protein. Further analysis of mutants (R18A, I141A, L143A and E153A) synapse and cleavage showed that these mutants were blocked in recombination at the stage of strand cleavage.

Conclusions/Significance

This data reveals that some of the highly conserved residues both in the N-terminus and C-terminus region of phiC31 integrase, play vital roles in the substrate binding and cleavage. The cysteine-rich motif and the C-tail val-rich region of phiC31 integrase may represent the major DNA binding domains of phiC31 integrase.     

PhiC31 integrase induces efficient site-specific excision in zebrafish

Site-specific recombinases catalyze recombination between specific targeting sites to delete, insert, invert, or exchange DNA with high fidelity. In addition to the widely used Cre and Flp recombinases, the phiC31 integrase system from Streptomyces phage may also be used for these genetic manipulations in eukaryotic cells. Unlike Cre and Flp, phiC31 recognizes two heterotypic sites, attB and attP, for recombination. While the phiC31 system has been recently applied in mouse and human cell lines and in Drosophila, it has not been demonstrated whether it can also catalyze efficient DNA recombination in zebrafish. Here we show that phiC31 integrase efficiently induces site-specific deletion of episomal targets as well as chromosomal targets in zebrafish embryos. Thus, the phiC31 system can be used in zebrafish for genetic manipulations, expanding the repertoire of available tools for genetic manipulation in this vertebrate model.     

PhiC31 integrase mediates integration in cultured synovial cells and enhances gene expression in rabbit joints

BACKGROUND: Gene transfer to synovium in joints has been shown to be an effective approach for treating pathologies associated with rheumatoid arthritis (RA) and related joint disorders. However, the efficiency and duration of gene delivery has been limiting for successful gene therapy for arthritis. The transient gene expression that often accompanies non-viral gene delivery can be prolonged by integration of vector DNA into the host genome. We report a novel approach for non-viral gene therapy to joints that utilizes phage phiC31 integrase to bring about unidirectional genomic integration. METHODS: Rabbit and human synovial cells were co-transfected with a plasmid expressing phiC31 integrase and a plasmid containing the transgene and an attB site. Cells were cultured with or without G418 selection and the number of neo-resistant colonies or eGFP cells determined, respectively. Plasmid rescue, PCR query, and DNA sequence analysis were performed to reveal integration sites in the rabbit and human genomes. For in vivo studies, attB-reporter gene plasmids and a plasmid expressing phiC31 integrase were intra-articularly injected into rabbit knees. Joint sections were used for histological analysis of beta-gal expression, and synovial cells were isolated to measure luciferase expression. RESULTS: We demonstrated that co-transfection of a plasmid expressing phiC31 integrase with a plasmid containing the transgene and attB increased the frequency of transgene expression in rabbit synovial fibroblasts and primary human RA synoviocytes. Plasmid rescue and DNA sequence analysis of plasmid-chromosome junctions revealed integration at endogenous pseudo attP sequences in the rabbit genome, and PCR query detected integration at previously characterized integration sites in the human genome. Significantly higher levels of transgene expression were detected in vivo in rabbit knees after intra-articular injection of attB-reporter gene plasmids and a plasmid expressing phiC31 integrase. CONCLUSION: The ability of phiC31 integrase to facilitate genomic integration in synovial cells and increase transgene expression in the rabbit synovium suggests that, in combination with more efficient DNA delivery methods, this integrase system could be beneficial for treatment of rheumatoid arthritis and other joint disorders.     

Optimized transgenesis in Xenopus laevis/gilli isogenetic clones for immunological studies

Xenopus laevis provides a unique animal model, alternative to mouse, to study immunology. Even though, several methodologies have been developed for the generation of transgenic Xenopus, to date none have been adapted for the X. laevis/gilli (LG) isogenetic clones that are essential for immunological studies. Since LG clones are generated via gynogenesis, transgenic methods using transgene integration into the sperm nuclei are not suited. Therefore, we have tested three alternative methods for LG transgenesis: the phiC31 integrase, the Sleeping Beauty transposase, and the I-SceI meganuclease. All three techniques produced transgenic LG clones; however, the I-SceI meganuclease was most effective. It resulted in high transgenesis efficiency (35-50%), bright nonmosaic GFP expression as well as stable germline transmission with 100% of the progeny carrying the transgene. Production of transgenic LG clones will allow us to modulate immune gene expression and further strengthen X. laevis as a biomedical model.     

New methods for tightly regulated gene expression and highly efficient chromosomal integration of cloned genes for Methanosarcina species

A highly efficient method for chromosomal integration of cloned DNA into Methanosarcina spp. was developed utilizing the site-specific recombination system from the Streptomyces phage φC31. Host strains expressing the φC31 integrase gene and carrying an appropriate recombination site can be transformed with non-replicating plasmids carrying the complementary recombination site at efficiencies similar to those obtained with self-replicating vectors. We have also constructed a series of hybrid promoters that combine the highly expressed M. barkeri PmcrB promoter with binding sites for the tetracycline-responsive, bacterial TetR protein. These promoters are tightly regulated by the presence or absence of tetracycline in strains that express the tetR gene. The hybrid promoters can be used in genetic experiments to test gene essentiality by placing a gene of interest under their control. Thus, growth of strains with tetR-regulated essential genes becomes tetracycline-dependent. A series of plasmid vectors that utilize the site-specific recombination system for construction of reporter gene fusions and for tetracycline regulated expression of cloned genes are reported. These vectors were used to test the efficiency of translation at a variety of start codons. Fusions using an ATG start site were the most active, whereas those using GTG and TTG were approximately one half or one fourth as active, respectively. The CTG fusion was 95% less active than the ATG fusion.     

Bacteriophage recombination systems and biotechnical applications

Bacteriophage recombination systems have been widely used in biotechnology for modifying prokaryotic species, for creating transgenic animals and plants, and more recently, for human cell gene manipulation. In contrast to homologous recombination, which benefits from the endogenous recombination machinery of the cell, site-specific recombination requires an exogenous source of recombinase in mammalian cells. The mechanism of bacteriophage evolution and their coexistence with bacterial cells has become a point of interest ever since bacterial viruses’ life cycles were first explored. Phage recombinases have already been exploited as valuable genetic tools and new phage enzymes, and their potential application to genetic engineering and genome manipulation, vectorology, and generation of new transgene delivery vectors, and cell therapy are attractive areas of research that continue to be investigated. The significance and role of phage recombination systems in biotechnology is reviewed in this paper, with specific focus on homologous and site-specific recombination conferred by the coli phages, λ, and N15, the integrase from the Streptomyces phage, ΦC31, the recombination system of phage P1, and the recently characterized recombination functions of Yersinia phage, PY54. Key steps of the molecular mechanisms involving phage recombination functions and their application to molecular engineering, our novel exploitations of the PY54-derived recombination system, and its application to the development of new DNA vectors are discussed.     

Efficient reversal of phiC31 integrase recombination in mammalian cells

Over the past decade, the integrase enzyme from phage phiC31 has proven to be a useful genome engineering tool in a wide variety of species, including mammalian cells. The enzyme efficiently mediates recombination between two distinct sequences, attP and attB, producing recombinant product sites, attL and attR. The reaction proceeds exclusively in a unidirectional manner, because integrase is unable to synapse attL and attR. To date, use of phiC31 integrase has been limited to attP × attB recombination. The factor needed for the reverse reaction – the excisionase or recombination directionality factor (RDF) – was identified recently and shown to function in vitro and in bacterial cells. To determine whether the phiC31 RDF could also function in mammalian cells, we cloned and tested several vectors that permit assessment of phiC31 RDF activity in mammalian environments. In the human and mouse cell lines tested (HeLa, HEK293, and NIH3T3), we observed robust RDF activity, using plasmid and/or genomic assays. This work is the first to demonstrate attL–attR serine integrase activity in mammalian cells and validates phiC31 RDF as a new tool that will enable future studies to take advantage of phiC31 integrase recombination in the forward or reverse direction.     

Efficient in vitro plant regeneration and generation of transgenic plants in barley (Hordeum vulgare L.) using particle bombardment

Plant regeneration from immature embryos of 15 Indian barley genotypes (Hordeum vulgare L.) was examined. Highest percent callus induction and number of regenerated plantlets were obtained in cultivars BL 2 (94.4 %; 12.1), RD 2668 (92.6 %; 9.1) and RD 2552 (90.8 %; 7.8). The highly responding cultivar BL 2 was selected for further development of transformation protocol. The plasmid DNA isolated from pCAMBIA1381 harbouring hptII gene as selectable marker and gusA gene as reporter was used. Particle bombardment was used for transformation of immature embryos and regeneration of transgenic plants in Indian barley genotype for the first time. Transformation experiments were carried out using different parameters and optimum conditions for DNA delivery was standardized. The transient expression of gusA gene was investigated as a preliminary test of optimum DNA delivery and for selecting the most appropriate bombardment parameters. The optimum conditions were: gold microparticles (diameter 1.0 μm) shot with 1,100 psi rupture disc pressure. The 3 cm distance between rupture disk and macrocarrier and 9 cm target tissue distance yielded high transient GUS expression. The immature embryos were bombarded twice to increase area for efficient gene delivery. Osmotic medium optimization with 0.4 M sorbitol and preculture of immature embryos for 5 days prior to bombardment resulted into efficient gene transfer in barley. Selection of transformed tissue was performed after 7 days resting step on selection medium containing 50 mg?l^?1 hygromycin. After two more selection steps, green shoots were rooted on MSB₅ medium with 50 mg?l^?1 hygromycin. PCR analysis using primers specific for hptII and gusA genes and Southern blot analysis with hptII probes confirmed the stable integration of transgene in barley genome. Molecular analysis of T₁ generation plantlets revealed the amplification of selectable marker hptII gene in the progeny.