High-Efficiency Full-Length cDNA Cloning by Biotinylated CAP Trapper

We have devised a method for efficiently constructing high-content full-length cDNA libraries based on chemical introduction of a biotin group into the diol residue of the cap structure of eukaryotic mRNA, followed by RNase I treatment to select full-length cDNA. The selection occurs by trapping the biotin residue at the cap sites using streptavidin-coated magnetic beads, thus eliminating incompletely synthesized cDNAs. When this method was used to construct a mouse brain full-length cDNA library, our evaluation showed that more than 95% of the total clones were of full length, and recombinant clones could be produced with high efficiency (1.2 × 10⁷/10 μg starting mRNA). The analysis of 120 randomly picked clones indicates an unbiased representation of the starting mRNA population.     

Identification of unique transcripts from a mouse full-length, subtracted inner ear cDNA library

A small-scale full-length library construction approach was developed to facilitate production of a mouse full-length cDNA encyclopedia representing approximately 250 enriched, normalized, and/or subtracted cDNA libraries. One library produced using this approach was a subtracted adult mouse inner ear cDNA library (sIEa). The average size of the inserts was approximately 2.5 kb, with the majority ranging from 0.5 to 7.0 kb. From this library 22,574 sequence reads were obtained from 15,958 independent clones. Sequencing and chromosomal localization established 5240 clusters, with 1302 clusters being unique and 359 representing new ESTs. Our sIEa library contributed 56.1% of the 7773 nonredundant Unigene clusters associated with the four mouse inner ear libraries in the NCBI dbEST. Based on homologous chromosomal regions between human and mouse, we identified 1018 UniGene clusters associated with the deafness locus critical regions. Of these, 59 clusters were found only in our sIEa library and represented approximately 50% of the identified critical regions.     

Expression cloning screening of a unique and full-length set of cDNA clones is an efficient method for identifying genes involved in Xenopus neurogenesis

Functional screens, where a large numbers of cDNA clones are assayed for certain biological activity, are a useful tool in elucidating gene function. In Xenopus, gain of function screens are performed by pool screening, whereby RNA transcribed in vitro from groups of cDNA clones, ranging from thousands to a hundred, are injected into early embryos. Once an activity is detected in a pool, the active clone is identified by sib-selection. Such screens are intrinsically biased towards potent genes, whose RNA is active at low quantities. To improve the sensitivity and efficiency of a gain of function screen we have bioinformatically processed an arrayed and EST sequenced set of 100,000 gastrula and neurula cDNA clones, to create a unique and full-length set of approximately 2500 clones. Reducing the redundancy and excluding truncated clones from the starting clone set reduced the total number of clones to be screened, in turn allowing us to reduce the pool size to just eight clones per pool. We report that the efficiency of screening this clone set is five-fold higher compared to a redundant set derived from the same libraries. We have screened 960 cDNA clones from this set, for genes that are involved in neurogenesis. We describe the overexpression phenotypes of 18 single clones, the majority of which show a previously uncharacterised phenotype and some of which are completely novel. In situ hybridisation analysis shows that a large number of these genes are specifically expressed in neural tissue. These results demonstrate the effectiveness of a unique full-length set of cDNA clones for uncovering players in a developmental pathway.     

Isolation and characterization of bovine and mouse terminal deoxynucleotidyltransferase cDNAs expressible in mammalian cells.

We have isolated nearly full-length cDNA clones of terminal deoxynucleotidyltransferase (TdT) from calf thymus and mouse lymphoma cDNA libraries. The libraries were constructed using the pcD vector system which permits the expression of cDNA inserts in mammalian cells. The bovine TdT cDNA clone contains an open reading frame coding for 520 amino acids, Mr 59,678. The mouse TdT cDNA clone contains an open reading frame of 1,587 bp, whose translated cDNA encodes a 60,004 dalton protein. The mouse TdT cDNA clone contains 60 bp in the 3' end region of the coding sequence not found in the bovine TdT cDNA sequence, otherwise, the clones share about 80% homology. A possible nuclear-localization-sequence (Pro-Arg-Lys-Lys-Arg-Pro-Arg) was conserved in the N-terminal region in the mouse and bovine cDNA clones. Bovine and mouse cDNAs transfected into COS7 monkey fibroblasts directed the synthesis of enzymatically active protein of Mr 60,000 which was detected immunologically using polyclonal rabbit antibody against bovine TdT. Bovine TdT expressed in COS7 cells by nearly full-length cDNA clone was localized in the nucleus and the translational product of pOK103 lacking the nuclear-localization-sequence was localized in the cytoplasm.     

High-efficiency cloning of Arabidopsis full-length cDNA by biotinylated CAP trapper

Full-length cDNAs are essential for functional analysis of plant genes. We constructed high-content, full-length cDNA libraries from Arabidopsis thaliana plants based on chemical introduction of a biotin group into the diol residue of the CAP structure of eukaryotic mRNA, followed by RNase I treatment, to select full-length cDNA. More than 90% of the total clones obtained were of full length; recombinant clones were obtained with high efficiency (2.2 × 10⁶/9 μg starting mRNA). Sequence analysis of 111 randomly picked clones indicated that 32 isolated cDNA groups were derived from novel genes in the A. thaliana genome.     

An efficient strategy to isolate full-length cDNAs based on an mRNA cap retention procedure (CAPture).

The ability to generate cDNA libraries is one of the most fundamental procedures in contemporary molecular biology. One of the major drawbacks of current methods is that most cDNAs present in any given library are incomplete, rendering the characterization of genes an inefficient and time-consuming task. We have developed an affinity selection procedure using a fusion protein containing the murine cap-binding protein (eukaryotic initiation factor 4E), coupled to a solid support matrix, that allows for the purification of mRNAs via the 5' cap structure. When combined with a single-strand-specific RNase digestion step, specific retention of complete cDNA-RNA duplexes following first-strand synthesis is achieved. This method can be used to generate cDNA libraries in which polyadenylated and nonpolyadenylated mRNAs are equally represented and to enrich for full-length or 5'-end clones, thus facilitating cDNA cloning and promoter mapping.     

A simple,rapid, efficient and inexpensive strategy for sequencing clones from cDNA libraries

In this report, we describe a simple, rapid, efficient and inexpensive strategy for sequencing inserted DNAs from clones of cDNA or gDNA libraries. This strategy uses PCR products directly amplified from transformed bacterial colonies, with universal primers within the vector. The method can be applied for sequencing cDNA or gDNA libraries with up to 4 ∼ 5 kb insert sizes, without overnight liquid culture or plasmid DNA preparation steps. We successfully used this method to analyze clones from full-length, enriched cDNA libraries. Although simple, following this strategy will significantly help researchers to avoid unnecessary steps in the analysis of a cDNA library.     

Cloning full-length, cap-trapper-selected cDNAs by using the single-strand linker ligation method.

We have developed the single-strand linker ligation method (SSLLM), which uses DNA ligase to add a dsDNA linker to single-stranded (ss) full-length cDNA. The linkers have random 6-bp (dN6 or dGN5) 3' overhangs that can ligate to any cDNA sequence, thereby facilitating the production of cDNA libraries with titers exceeding 1 x 10(6) independent clones. We confirmed that the 5' ends of cDNA inserts cloned by using SSLLM are full-length and include the 5' untranslated regions. The great advantage of our method is that the elimination of the GC tail simplifies the sequencing and protein translation of the full-length clones. Further, our method tags ss cDNAs more efficiently than does the traditional RNA ligase reaction.     

Isolation and sequence analysis of cDNA for rat carboxypeptidase E [EC 3.4.17.10], a neuropeptide processing enzyme

Carboxypeptidase E (CPE) is the carboxypeptidase B-like enzyme associated with the biosynthesis of numerous peptide hormones and neurotransmitters. This enzyme has been previously purified to homogeneity from bovine tissues, and cDNA clones (non-full length) isolated from a bovine pituitary cDNA library. In the present study, cDNA encoding full-length rat CPE has been isolated and sequenced. Both the nucleotide and amino acid sequences of rat CPE show substantial homology with the bovine sequences. The bovine and rat nucleotide sequences are homologous within the entire coding region, as well as within several portions of the 3'-untranslated region. The predicted amino acid sequence of rat CPE is greater than 90% homologous with the bovine enzyme. Northern blot analyses indicate a single species of CPE mRNA approximately 2100 nucleotides in length to be present in many neural and endocrine tissues. High levels of CPE mRNA are present in rat hypothalamus, hippocampus, midbrain, striatum, and cerebral cortex; and moderate levels are present in the brain stem, cerebellum, heart, adrenal, and eye. Low levels are detected in testis and duodenum, but not in liver or thymus. This tissue-specific expression of CPE mRNA is consistent with the proposed role for this enzyme in the production of numerous peptide hormones and neurotransmitters.     

Expression sequence tag-specific full-length cDNA cloning: actin cDNAs

Current strategies for cDNA cloning are based on construction of cDNA libraries and colony screening. The process of obtaining a full-length cDNA clone can be highly time and labor intensive. Using the human actin gene as a model target cDNA, we have developed an RNA-capture method for rapid cloning of full-length cDNAs. The approach involves the capture of mRNA with expressed sequence tag (EST)-derived, biotin labeled antisense "capture" primers and streptavidin-coated magnetic beads. Full-length cDNA is then synthesized from purified EST-specific mRNA and cloned directly into plasmid vectors. The results of using beta-actin-based capture primers on cytoplasmic RNA were the isolation of both beta- and gamma-actin cDNA clones. Of the 16 actin-specific cDNA clones analyzed, 15 (93%) were full-length. This approach for cloning full-length cDNAs from available ESTs or partial cDNA sequences will facilitate a more rapid and efficient characterization of gene structure and function.     

Generation of full-length cDNA libraries enriched for differentially expressed genes for functional genomics

Here, we describe the application of a RecA-based cloning technology to generate full-length cDNA libraries enriched for genes that are differentially expressed between tumor and normal tissue samples. First, we show that the RecA-based method can be used to enrich cDNA libraries for several target genes in a single reaction. Then, we demonstrate that this method can be extended to enrich a cDNA library for many full-length cDNA clones using fragments derived from a subtracted cDNA population. The results of these studies show that this RecA-mediated cloning technology can be used to convert subtracted cDNAs or a mixture of several cDNA fragments corresponding to differentially expressed genes into a full-length library in a single reaction. This procedure yields a population of expression-ready clones that can be used for further high-throughput functional screening.