Thermophilic anaerobic treatment of sulphur rich forest industry wastewater

Thermophilic anaerobic treatment of sulphur-rich paper mill wastewater (0.8-3.1 gCOD/l, 340–850 mgSO₄/l; COD:SO₄ 3.4-5.3) was studied in three laboratory-scale, upflow anaerobic sludge blanket (UASB) reactors and in bioassays. The reactors were inoculated with non-adapted thermophilic granular sludge. In the bioassays, no inhibition of the inoculum was detected and about 62% COD removal (sulphide stripped) was obtained. About 70 to 80% of the removed COD was methanised. In the reactors, up to 60–74% COD removal (effluent sulphide stripped) was obtained at loading rates up to 10–30 kgCOD/m³d and hydraulic retention times down to 6 to 2 hours. The effluent total sulphide was up to 150–250 mg/l. Sulphide inhibition could not be confirmed from the reactor performances. The results from bioassays suggested that both the inoculum and sludge from the UASB reactor used acetate mainly for methane production, while sulphide was produced from hydrogen or its precursors.     

Inorganic composition and microbial characteristics of methanogenic granular sludge grown in a thermophilic upflow anaerobic sludge blanket reactor

An upflow anaerobic sludge blanket reactor was operated under thermophilic conditions (55° C) for 160 days by feeding a wastewater containing sucrose as the major carbon source. The reactor exhibited a satisfactory performance due to the formation of well-settling granulated sludge, achieving a total organic carbon (TOC) removal of above 80% at an organic loading rate of 30 kg total organic C m^–3 day^–1. Structural and microbial properties of the methanogenic granular sludge were examined using scanning electron microscope X-ray analyses and serum vial activity tests. All the thermophilic granules developed showed a double-layered structure, comprised of a black core portion and a yellowish exterior portion. The interior cope portion contained abundant crystalline precipitates of calcium carbonate. Calcium-bound phosphorus was also present more prominently in the core portion than in the exterior portion. Methanogenic activities of the thermophilic granules both from acetate and from H₂ increased with increasing vial-test temperature in the range of 55–65° C [from 1.43 to 2.36 kg CH₄ chemical oxygen demand (COD) kg volatile suspended solids (VSS)^–1 day^–1 for acetate and from 0.85 to 1.11 kg CH₄ COD kg VSS^–1 day^–1 for H₂]. On the other hand, propionate-utilizing methanogenic activity was independent of vial-test temperature, and was much lower (0.1–0.12 kg CH₄ COD kg VSS^–1 day^–1) than that from either acetate or H₂. Acetate consumption during vial tests was considerably inhibited by the presence of H₂ in the headspace, indicating that a syntrophic association between acetate oxidizers and H₂-utilizing methane-producing bacteria was responsible for some portion of the overall acetate elimination by the theromophilically grown sludge.     

A hybrid anaerobic solid-liquid bioreactor for food waste digestion

A hybrid anaerobic solid-liquid (HASL) bioreactor is an enhanced two-phase anaerobic system, that consists of a solid waste reactor as the acidification reactor and a wastewater reactor, i.e. an upflow anaerobic sludge blanket (UASB) reactor as the methanogenic reactor. Food waste digestion in HASL bioreactors with pre-acidification and HASL operation stages was investigated in two separate runs. After 8 days of pre-acidification in Run A and 4 days in Run B, total volatile fatty acid (TVFA) and chemical oxygen demand (COD) concentrations in the leachates of both acidification reactors were similar. During HASL operation stage, TVFA and COD removal in the methanogenic phase were 77–100% and 75–95%, respectively. Some 99% of the total methane generated was from the methanogenic phase with a content of 68–70% methane. At the end of operation, about 59–60% of the added volatile solids (VS) were removed with a methane yield of 0.25 l g^–1 VS.     

Improvement of the anaerobic treatment of potato processing wastewater in a UASB reactor by co-digestion with glycerol

The effect of three different types of glycerol on the performance of up-flow anaerobic sludge blanket (UASB) reactors treating potato processing wastewater was investigated. High COD removal efficiencies were obtained in both control and supplemented UASB reactors (around 85%). By adding 2 ml glycerol product per liter of raw wastewater, the biogas production could be increased by 0.74 l biogas ml⁻¹ glycerol product, which leads to energy values in the range of 810–1270 kWh_electric per m³ product. Moreover, a better in-reactor biomass yield was observed for the supplemented UASB reactor (0.012 g VSS g⁻¹ COD_removed) compared to the UASB control (0.002 g VSS g⁻¹ COD_removed), which suggests a positive effect of glycerol on the sludge blanket growth.     

Methane production from acetamide in an upflow anaerobic sludge-blanket reactor based on a synergistic association between an aerobic rod and methanogens

Acetamide degradation was investigated in a bench-scale upflow anaerobic sludge-blanket (UASB) reactor, successively fed with acetamide, acetate and acetamide, over a period of 343 days, at different hydraulic retention times (t _HR). The reactor was seeded with the sludge previously described [Guyot et al. (1994) Appl Microbiol Biotechnol, 42:452-456], in which methanogenesis from acetamide was performed through a synergistic relationship between an acetamide-degrading, aerobic rod and methanogens. When the reactor was fed acetamide, the chemical oxygen demand (COD) removal efficiency was 86% at volumetric loads less than 1.18 kg COD m^–3 day ^–1. At higher volumetric loads, the efficiency decreased markedly, e.g. 50.9% at a volumetric organic load of 3.39 kg COD m^–3 day^–1 (1 day t _HR) with an accumulation of both acetamide and acetate. The same reactor, when fed with acetate at t _HR 1 day, reached a high COD removal (99%). Evidence of the inhibition of acetate degradation by acetamide is presented. After a long period (135 days) without feeding the reactor with acetamide, the sludge reactor was still capable of degrading acetamide when this substrate was supplied again. It seems that the synergistic degradation of acetamide by aerobes and methanogens present in the UASB reactor sludge is stable over a long period (343 days), in spite of limiting concentrations of dissolved oxygen in the feed.     

Rapid granulation and sludge retention for tetrachloroethylene removal in an upflow anaerobic sludge blanket reactor

A laboratory scale upflow anaerobic sludge blanket (UASB) reactor was operated at 35 °C for over 200 days to investigate the granulation mechanism during tetrachloroethylene (TCE) biodegradation. Anaerobic, unacclimated sludge and glucose were used as seed and primary substrate, respectively. TCE-degrading granules developed after 1.5 months of start-up. They grew at an accelerated pace for 7 months. The TCE-degrading granules had a maximum diameter of 2.5 mm and specific methanogenic activity of 1.32 g chemical oxygen demand (COD) g^–1 total suspended solid (TSS) day^–1. 94% COD and 90% TCE removal efficiencies were achieved when the reactor was operating at loading rates as high as 160 mg TCE l^–1 day^–1 and 14 g COD l^–1 day^–1, after 230 days of continuous operation.     

The use of polyurethane foam for microbial retention in methanogenic fermentation of propionate

Summary The use of polyurethane foam (PUF) as a microbial support carrier was evaluated with a mesophilic propionate-acclimatized sludge. The acclimatized sludge could be immobilized rapidly and stably in PUF of smaller pore size under shaking conditions. The sludge retained in PUF could maintain a high propionate metabolic activity for a long period. High conversion rates of propionate to methane of 23–65 g chemical oxygen demand (COD)·1^–1 · day^–1 could be achieved in reactors packed with PUF-retained sludge. A dense sludge of 0.08–0.25 g mixed-liquor volatile suspended solids (MLVSS)·cm^–3 was retained in PUF. Microscopic analysis suggested that filamentous microorganisms, e.g., Methanothrix spp. could play an important role in the efficient retention of acclimatized sludge in PUF. Offprint requests to: Shiro Nagai     

Effect of pH on phase separated anaerobic digestion

A pilot scale experiment was performed for a year to develop a two-phase anaerobic process for piggery wastewater treatment (COD: 6,000 mg/L, BOD: 4,000 mg/L, SS: 500 gm/L, pH 8.4, alkalinity 6,000 mg/L). The acidogenic reactor had a total volume of 3 m³, and the methanogenic reactor, an, anaerobic up-flow sludge filter, combining a filter and a sludge bed, was also of total volume 3 m³ (1.5 m³ of upper packing material). Temperatures of the acidogenic and methanogenic reactors kept at 20°C and 35°C., respectively. When the pH of the acidogenic reactor was controlled at 6.0–7.0 with HCl, the COD removal efficiency increased from 50 to 80% over a period of six months, and as a result, the COD of the final effluent fell in the range of 1,000–1,500 mg/L. BOD removal efficiency over the same period was above 90%, and 300 to 400 mg/L was maintained in the final effluent. The average SS in the final effluent was 270 mg/L. The methane production was 0.32 m³ CH₄/kg COD_removed and methane content of the methanogenic reactor was high value at 80–90%., When the pH of the acidogenic reactor was not controlled over the final two months, the pH reached 8.2 and acid conversion decreased compared with that of pH controlled, while COD removal was similar to the pH controlled operation. Without pH control, the methane content in the gas from methanogenic reactor improved to 90%, compared to 80% with pH control.     

The influence of anaerobic pretreatment on the nitrogen removal from biosynthetic pharmaceutical wastewaters

The C:N ratio of the pharmaceutical wastewaters is usually suitable for a combination of the anaerobic pretreatment with the high COD removal and aerobic posttreatment with the efficient biological N removal. This kind of anaerobic-aerobic process was tested in semipilot scale by using a UASB reactor and an activated sludge system with a predenitrification (total volume 100 1). It was found that at a total HRT of 2.3 days an average of 97.5% of COD and 73.5% of total N was removed. The UASB reactor was operated at 30°C with a volumetric loading rate of 8.7 kg.m^-3.d^-1, the efficiency of COD removal was 92.2%. The processes, which take part in the biological removal of nitrogen, especially the nitrification, were running with lower rates than usually observed in aerobic treatment systems.Abbreviations AAO anaerobic anoxic oxic configuration - AOO anaerobic oxic oxic configuration - B _V volumetric organic loading rate (kg COD.m^-3. d^-1) - dB _x specific COD removal rate (mg COD. g^-1 VSS. d^-1) - DNR denitrification rate (mg N–NO₃. g^-1 VSS. h^-1) - E_COD efficiency of COD removal (%) - HRT hydraulic retention time (d) - NR nitrification rate (mg N–NO₃. g^-1 VSS. h^-1) - R recirculation ratio (%) - SBP specific biogas production (m³.kg^-1 removed COD) - SRT solids retention time; sludge age (d) - SS suspended solids (g.1^-1) - UASB upflow anaerobic sludge blanket reactor - VSS volatile suspended solids (g.1^-1)     

Two-stage anaerobic digestion of tomato, cucumber, common reed and grass silage in leach-bed reactors and upflow anaerobic sludge blanket reactors

Anaerobic digestion of tomato, cucumber, common reed and grass silage was studied in four separate two-stage reactor configuration consisting of leach bed reactor (LBR) and upflow anaerobic sludge blanket reactor (UASB). LBR studies showed that COD solubilization for cucumber and grass silage was higher (50%) than tomato (35%) and common reed (15%). Results also showed that 31-39% of initial TKN present in tomato and cucumber was solubilized in the leachates and 47-54% of the solubilized TKN was converted to NH₄-N. The corresponding values for common reed and grass silage were 38-50% and 18-36%, respectively. Biomethanation of the leachates in UASB reactors resulted in methane yields of 0.03-0.14 m³ CH₄ kg⁻¹VS_fed for the studied crop materials. Thus, high COD solubilization, high nitrogen mineralization and solubilization rates were feasible during anaerobic digestion of lignocellulosic materials in a two-stage LBR-UASB reactor system.     

Continuous anaerobic treatment of wastewaters containing formaldehyde and urea

The toxicity of formaldehyde (FA) in batch assays, using volatile fatty acids (VFA) as co-substrate, and the continuous anaerobic treatment of wastewaters containing FA in upflow anaerobic sludge blanket (UASB) reactors was investigated. In batch studies, FA exerted a 50% methanogenic toxicity on VFA at concentrations of around 100 mg/l, 2.5 times lower than values reported with sucrose. Although at FA concentrations higher than 200 mg/l methanogenesis was completely inhibited, a partial recovery of the bacterial activity was observed after 250 h when the FA had been removed from the medium. The continuous anaerobic degradation of FA at concentrations up to 2 g/l, using 1.6 g/l of glucose as co-substrate, was studied in a UASB reactor. A stable and efficient operation was observed at organic loading rates (OLR) of 6.0 g COD/l·d and with a COD/FA ratio as low as 1.4. A synthetic substrate with the same characteristics as the effluents produced during fibreboard adhesives manufacturing (based on urea-FA), i.e. 0.95 g FA/l and 0.35 g urea/l, was treated in a UASB reactor. The applied OLR and nitrogen loading rate (NLR) were 3.45 g COD/l·d and 0.58 g N/l·d, respectively. COD removal efficiencies were maintained at 90–95%, FA and urea being completely degraded.     

Influence of biogas-induced mixing on granulation in UASB reactors

Studies have been carried out to correlate biogas-induced mixing and granulation in upflow anaerobic sludge blanket (UASB) reactors, treating low-strength as well as high-strength biodegradable wastewaters. A dimensionless granulation index (GI) has been framed taking into account the mixing in sludge bed due to produced biogas. Analysis of full-scale, pilot-scale and lab-scale UASB reactors treating actual wastewaters reveals the significance of biogas-induced mixing, represented by GI, on granulation of biomass in the reactors. For obtaining proper granulation in UASB reactors (percentage granules greater than 50%, w/w), resulting in higher chemical oxygen demand (COD) removal efficiency, it is recommended to maintain GI values in the range of 15,000–57,000.     

Cotton yarn and fabric finishing wastewater treatment in upflow anaerobic filter

Summary Wastewater from cotton yarn and fabric finishing was successfully treated in an upflow anaerobic filter at 35°C up to a COD loading of 1 Kgr COD/m³ · day; the COD removal varied from 50 to 90% and production of biogas was 0,2–0.4 L/g influent COD, having 70–80% CH₄. At higher COD loading biogas production stopped although COD removal remainedca 50%.     

Performance of upflow anaerobic sludge blanket (UASB) reactor treating wastewaters containing carbon tetrachloride

The anaerobic biodegradation of carbon tetrachloride (CT) was investigated during the granulation process by reducing the hydraulic retention time, increasing the chemical oxygen demand (COD) and CT loadings in a 2l laboratory-scale upflow anaerobic sludge blanket (UASB) reactor. Anaerobic unacclimated sludge and glucose were used as seed and primary substrate, respectively. Granules were developed 4 weeks after start-up, which grew at an accelerated rate for 8 months, and then became fully grown. The effect of operational parameters such as influent CT concentrations, COD, CT loading, food to biomass ratio and specific methanogenic activity (SMA) were also considered during granulation. The granular sludge cultivated had a maximum diameter of 2.1 mm and SMA of 1.6 g COD/g total suspended solid (TSS) day. COD and CT removal efficiencies of 92 and 88% were achieved when the reactor was firstly operating at CT and COD loading rates of 17.5 mg/l day and 12.5 g/l day, respectively. This corresponds to hydraulic retention time of 0.28 day and food to biomass ratio of 0.5 g COD/g TSS day. Kinetic coefficients of maximum specific substrate utilization rate, half velocity coefficient, growth yield coefficient and decay coefficient were determined to be 2.4 × 10^–3 mg CT/TSS day^–1, 1.37 mg CT/l, 0.69 mg TSS/mg CT and 0.046 day^–1, respectively for CT biotransformation during granulation.     

Acetate treatment in 70°C upflow anaerobic sludge-blanket (UASB) reactors: start-up with thermophilic inocula and the kinetics of the UASB sludges

This study focused on the use of thermophilic anaerobic granulae in the start-up of 70°C acetate-fed upflow anaerobic sludge-blanket (UASB) reactors and the kinetics of granulae grown at 70°C. In the UASB reactors, chemical oxygen demand removal commenced within 48 h of the start-up. The maximum reduction in chemical oxygen demand was 84% with the feed containing yeast and 71% without a yeast supplement. In the bioassays, the yeast-grown sludge converted 98% of the acetate consumed to methane as compared to 92% for the sludge grown without yeast. The highest initial specific methane production rate (µ_{CH 4}) of the UASB sludges grown at 70°C was 0.088 h^–1 at an acetate concentration of 4.6 mM. The higher initial acetate concentration was found to prolong the lag-phase in methane production significantly and to decrease the µ_{CH 4}. The half-saturation constant (K _s), the inhibition constant (K _i), the inhibition response coefficient (n), and the µ_{CH 4} ^max, calculated according to a modified Haldane equation, were 1.5 mM, 2.8 mM, 0.8, and 0.28 h^–1, respectively. The prolonged starvation of the 70°C sludge (15 days) decreased the µ_{CH 4} from about 0.022 h^–1 to 0.011 h^–1 and increased the lag phase in methane production from 6 h to 24 h as compared to non-starved sludge.     

Comparison of startup and anaerobic wastewater treatment in UASB, hybrid and baffled reactor

An experimental study was carried out to compare the performance of selected anaerobic high rate reactors operated simultaneously at 37?°C. The three reactors, namely upflow anaerobic sludge bed reactor (UASB), hybrid of UASB reactor and anaerobic filter (anaerobic hybrid reactor – AHR) and anaerobic baffled reactor (ABR), were inoculated with the anaerobic digested sludge from municipal wastewater treatment plant and tested with synthetic wastewater. This wastewater contained sodium acetate and glucose with balanced nutrients and trace elements (COD 6000?mg?·?l^?1). Organic loading rate (B _v ) was increased gradually from an initial 0.5?kg?·?m^?3?·?d^?1 to 15?kg?·?m^?3?·?d^?1 in all the reactors. From the comparison of the reactors' performance, the lowest biomass wash-out resulted from ABR. In the UASB, significant biomass wash-out was observed at the B _v 6?kg?·?m^?3?·?d^?1, and in the AHR at the B _v 12?kg?·?m^?3?·?d^?1. The demand of sodium bicarbonate for pH maintenance in ABR was two times higher as for UASB and AHR. The efficiency of COD removal was comparable for all three reactors – 80–90%. A faster biomass granulation was observed in the ABR than in the other two reactors. This fact is explained by the kinetic selection of filamentous bacteria of the Methanotrix sp. under a high (over 1.5?g?·?l^?1) acetate concentration.     

Comparison of CSTR and UASB reactor configuration for the treatment of sulfate rich wastewaters under acidifying conditions

The effects of lowering the operational pH from 6 to 5 on mesophilic (30 °C) sulfate reduction during the acidification of sucrose at an organic loading rate of 5 gCOD (l_reactor d)⁻¹ and at a COD/SO₄²⁻ ratio of 4 were evaluated in a CSTR and in a UASB reactor. The HRT was 24 h and 10 h, respectively. Acidification was complete in both reactors at pH 6 and the lowering of the operational pH to 5 did not affect the acidification efficiency in the CSTR but decreased the acidification efficiency of the UASB to 72%. The decrease to pH 5 caused an increase in the effluent butyrate and ethanol concentrations in both reactors. Lowering the pH from 6 to 5 caused a decrease in sulfate reduction efficiencies in both reactors, from 43% to 25% in the CSTR and from 95% to 34% in the UASB reactor. The acidification and sulfate reduction efficiencies at pH 5 could be increased to 94% and 67%, respectively, by increasing the HRT of the UASB reactor to 24 h.     

Acetate Degradation at 70°C in Upflow Anaerobic Sludge Blanket Reactors and Temperature Response of Granules Grown at 70°C

Anaerobic acetate degradation at 70°C and at 55°C (as a reference) was studied by running laboratory upflow anaerobic sludge blanket (UASB) reactors inoculated with mesophilic granular sludge. In UASB reactors fed with acetate-containing media (3 g of chemical oxygen demand [COD] per liter, corresponding to 47 mM acetate) approximately 50 days was needed at 70°C and less than 15 days was needed at 55°C to achieve an effluent COD of 500 to 700 mg/liter. In the UASB reactors at both 70 and 55°C up to 90% of the COD was removed. Batch assays showed that sludges from two 70°C UASB reactors, one run at a low effluent acetate concentration and the other run at a high effluent acetate concentration, exhibited slightly different responses to temperatures in the range from 37 to 70°C. Both 70°C sludges, as well as the 55°C sludge, produced methane at temperatures of 37 to 73°C. The 55°C sludge exhibited shorter lag phases than the 70°C sludges and higher specific methane production rates between 37 and 65°C.     

Scanning electron microscopy of biofilm development in anaerobic fixed-bed reactors: Influence of the inoculum

Summary Scanning electron microscopy was applied to evaluate the influence of inoculum on efficiency of initial biofilm formation and reactor performance. Five anaerobic fixed-bed reactors were inoculated with anaerobic sludges from different sources and operated in parallel under identical conditions with defined wastewater and acetate, propionate and butyrate as constituents In all sludges Methanothrix sp. was the predominant acetotroph. The reactors inoculated with anaerobic sludge adapted to the wastewater achieved the highest space loading with 21.0 g COD/l·d after 58 days. The inoculation with granular sludge from an upflow anaerobic sludge blanket (UASB) reactor resulted in significantly less reactor efficiency. Time course of biofilm formation and biofilm thickness (ranging from 20–200 m) depended on the type of inoculum.     

Effects of alternative carbon sources on biological transformation of nitrophenols

The removal of nitrophenols under denitrifying conditions was studied in bench-scale upflow anaerobic sludge blanket (UASB) reactors (R1, R2, R3 and R4) using three different carbon sources. Initially acetate was used as carbon source (substrate) in all the four reactors followed by glucose and methanol. Reactor R1 was kept as control and R2, R3, R4 were fed with 30 mg/l concentration of 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), and 2,4-dinitrophenol (2,4-DNP), respectively. Throughout the study the hydraulic retention time (HRT) and COD/NO₃ ^-–N ratio were kept as 24 h and 10, respectively. 2-Aminophenol (2-AP), 4-aminophenol (4-AP) and 2-amino,4-nitrophenol (2-A,4-NP) were found as the major intermediate metabolites of 2-NP, 4-NP and 2,4-DNP degradation, respectively. Methanol was found to be a better carbon source for 4-NP and 2,4-DNP degradation as compared to acetate and glucose, while 2-NP degradation was not influenced much by the change of substrate. Nitrate nitrogen removal was always more than 99%. COD removal efficiency of the nitrophenol fed reactors varied from 85.7% to 97.7%. The oxidation-reduction potential (ORP) inside the reactors dropped, up to –300 mv, with glucose as carbon source. As the reactors were switched over to methanol, ORP increased to –190 mv. The granular sludge developed inside the reactors was light brown in colour when acetate and glucose were used as substrate, which turned dark brown to black at the end of methanol run. Biomass yield in terms of volatile suspended solids was observed as 0.15, 0.089 and 0.14 g per gram of COD removal for acetate, glucose and methanol, respectively.