Contrasting solution conformations of peptides containing α,α-dialkylated residues with linear and cyclic side chains

The conformational properties of α,α-dialkylated amino acid residues possessing acyclic (diethylglycine, Deg: di-n-propylglycine, Dpg; di-n-butylglycine, Dbg) and cyclic (1-amino-cycloalkane-1-carboxylic acid, Ac_nc) side chains have been compared in solution. The five peptides studied by nmr and CD spectroscopy are Boc-Ala-Xxx-Ala-OMe, where Xxx = Deg(I). Dpg (II), Dbg (III), Ac₆c (IV), and Ac₇c (V). Delineation of solvent-shielded NH groups have been achieved by solvent and temperature dependence of NH chemical shifts in CDCl₃ and (CD₃)₂SO and by paramagnetic radical induced line broadening in pepiide III. In the Dxg peptides the order of solvent exposure of NH groups is Ala(1) > Ala(3) > Dxg(2), whereas in the Ac_nc peptides the order of solvent exposure of NH groups is Ala(1) > Ac_nc(2) > Ala(3). The nmr results suggest that Ac_nc peptides adopt folded β-turn conformations with Ala(1) and Ac_nc(2) occupying i + 1 and i + 2 positions. In contrast, the Dxg peptides favor extended C₅ conformations. The conformational differences in the two series are clearly borne out in CD studies. The solution conformations of peptides I-III are distinctly different from the β-turn structure observed in crystals. Low temperature nmr spectra recorded immediately after dissolution of crystals of peptide II provide evidence for a structural transition. Introduction of an additional hydrogen-bonding function in Boc-Ala-Dpg-Ala-NHMe (VI) results in a stabilization of a consecutive β-turn or incipient 3₁₀-helix in solution. © 1995 John Wiley & Sons, Inc.     

The conformational properties of α,β‐dehydroamino acids with a C‐terminal ester group

α,β‐Dehydroamino acid esters occur in nature. To investigate their conformational properties, a systematic theoretical analysis was performed on the model molecules Ac‐ΔXaa‐OMe [ΔXaa = ΔAla, (E)‐ΔAbu, (Z)‐ΔAbu, ΔVal] at the B3LYP/6‐311+ + G(d,p) level in the gas phase as well as in chloroform and water solutions with the self‐consistent reaction field‐polarisable continuum model method. The Fourier transform IR spectra in CCl₄ and CHCl₃ have been analysed as well as the analogous solid state conformations drawn from The Cambridge Structural Database. The ΔAla residue has a considerable tendency to adopt planar conformations C5 (?, ψ ≈ ? 180°, 180°) and β2 (?, ψ ≈ ? 180°, 0°), regardless of the environment. The ΔVal residue prefers the conformation β2 (?, ψ ≈ ? 120°, 0°) in a low polar environment, but the conformations α (?, ψ ≈ ? 55°, 35°) and β (?, ψ ≈ ? 55°, 145°) when the polarity increases. The ΔAbu residues reveal intermediate properties, but their conformational dispositions depend on configuration of the side chain of residue: (E)‐ΔAbu is similar to ΔAla, whereas (Z)‐ΔAbu to ΔVal. Results indicate that the low‐energy conformation β2 is the characteristic feature of dehydroamino acid esters. The studied molecules constitute conformational patterns for dehydroamino acid esters with various side chain substituents in either or both Z and E positions. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Type II β-turn conformation of pivaloyl-L-prolyl-α-aminoisobutyryl-N-methylamide: Theoretical,spectroscopic, and X-ray studies

Pivaloyl-L -Pro-Aib-N-methylamide has been shown to possess one intramolecular hydrogen bond in (CD₃)₂SO solution, by ¹H-nmr methods, suggesting the existence of β-turns, with Pro-Aib as the corner residues. Theoretical conformational analysis suggests that Type II β-turn conformations are about 2 kcal mol^?1 more stable than Type III structures. A crystallographic study has established the Type II β-turn in the solid state. The molecule crystallizes in the space group P2₁ with a = 5.865 Å, b = 11.421 Å, c = 12.966 Å, β = 97.55°, and Z = 2. The structure has been refined to a final R value of 0.061. The Type II β-turn conformation is stabilized by an intramolecular 4 → 1 hydrogen bond between the methylamide NH and the pivaloyl CO group. The conformational angles are ?_Pro = ?57.8°, ψ_Pro = 139.3°, ?_Aib = 61.4°, and ψ_Aib = 25.1°. The Type II β-turn conformation for Pro-Aib in this peptide is compared with the Type III structures observed for the same segment in larger peptides.     

Energy minimization studies on α-turns

Using a grid search technique, the entire conformational space of a system of four linked peptide units (tetrapeptide) was scanned to pick out geometrically possible 5→1 type hydrogen-bonded conformations defined as an α-turn. The energy minimization of these conformations led to 23 distinct minimum energy conformations (MECs) falling in 13 different classes. The presence of β and γ turn type hydrogen bonds along with 5→1 type hydrogen bond gave conformational variability in a given class. The occurrence of bifurcated hydrogen bonding network was a characteristic feature of most of the MECs. In many prototype MECs non-glycyl residues such as Ala and Pro could be accommodated. Comparison of MECs with the α-turn examples that are observed in proteins showed that the conformationally worked out MECs occurred in isolation in proteins, with the α-helical α-turn being distinctly the most predominant. © 1998 European Peptide Society and John Wiley & Sons, Ltd.     

Crystal and molecular structure of benzyloxycarbonyl-α-aminoisobutyryl-L-prolyl methylamide: The observation of an X2-Pro3 Type III β-Turn

The crystal and molecular structure of N-benzyloxycarbonyl-α-aminoisobutyryl-L -prolyl methylamide, the amino terminal dipeptide fragment of alamethicin, has been determined using direct methods. The compound crystallizes in the orthorhombic system with the space group P2₁2₁2₁. Cell dimensions are a = 7.705 Å, b = 11.365 Å, and c = 21.904 Å. The structure has been refined using conventional procedures to a final R factor of 0.054. The molecular structure possesses a 4 → 1 intramolecular N-H—O hydrogen bond formed between the CO group of the urethane moiety and the NH group of the methylamide function. The peptide backbone adopts the type III β-turn conformation, with ?₂ = ?51.0°, ψ₂ = ?39.7°, ?₃ = ?65.0°, ψ₃ = ?25.4°. An unusual feature is the occurrence of the proline residue at position 3 of the β-turn. The observed structure supports the view that Aib residues initiate the formation of type III β-turn conformations. The pyrrolidine ring is puckered in C^γ-exo fashion.     

Experimental conformational study of two peptides containing α-aminoisobutyric acid. Crystal structure of N-acetyl-α-aminoisobutyric acid methylamide

Some theoretical studies have predicted that the conformational freedom of the α-aminoisobutyric acid (H-Aib-OH) residue is restricted to the α-helical region of the Ramachandran map. In order to obtain conformational experimental data, two model peptide derivatives, MeCO-Aib-NHMe 1 and Bu^tCO-LPro-Aib-NHMe 2 , have been investigated. The Aib dipeptide 1 crystallizes in the monoclinic system (a = 12.71 Å, b = 10.19 Å, c = 7.29 Å, β = 110.02°, Cc space group) and its crystal structure was elucidated by x-ray diffraction analysis. The azimuthal angles depicting the molecular conformation (? = ?55.5°, ψ = ?39.3°) fall in the α-helical region of the Ramachandran map and molecules are hydrogen-bonded in a three-dimensional network. In CCl₄ solution, ir spectroscopy provides evidence for the occurrence of the so-called ₅ and C₇ conformers stabilized by the intramolecular i → i and i + 2 → i hydrogen bonds, respectively. The tripeptide 2 was studied in various solvents [CCl₄, CD₂Cl₂, CDCl₃, (CD₃)₂SO, and D₂O] by ir and pmr spectroscopies. It was shown to accommodate predominantly the βII folded state stabilized by the i + 3 → i hydrogen bond. All these experimental findings indicate that the Aib residue displays the same conformational behavior as the other natural chiral amino acid residues.     

Conformational behavior of α,α-dialkylated peptides

The preferred conformations of N-acetyl-N′-methyl amides of some dialkylglycines have been determined by empirical conformational-energy calculations; minimum-energy conformations were located by minimizing the energy with respect to all the dihedral angles of the molecules. The conformational space of these compounds is sterically restricted, and low-energy conformations are found only in the regions of fully extended and helical structures. Increasing the bulkiness of the substituents on the C^α, the fully extended conformation becomes gradually more stable than the helical structure preferred in the cases of dimethylglycine. This trend is, however, strongly dependent on the bond angles between the substituents on the C^α atom: In particular, helical structures are favored by standard values (111°) of the N-C^α-C′ angle, while fully extended conformations are favored by smaller values of the same angle, as experimentally observed, for instance, in the case of α,α-di-n-propylglycine.     

Structural versatility of peptides from Cα, α-disubstituted glycines: Crystal-state conformational analysis of homopeptides from Cα-methyl,Cα-benzylglycine [(αMe)Phe]n

The molecular and crystal structures of one derivative and three homopeptides (from the di-to the tetrapeptide level) of the chiral, C^{α, α}-disubstituted glycine C^α-methyl, C^α-benzylglycine [(αMe)Phe], have been determined by x-ray diffraction. The derivative is mClAc-D -(αMe)Phe-OH, and the peptides are pBrBz-[D -(αMe)Phe]₂-NHMe, pBrBz-[D -(αMe)Phe]₃-OH hemihydrate, and pBrBz-[D -(αMe)Phe]₄-OtBu sesquihydrate. All (αMe)Phe residues prefer ?,ψ torsion angles in the helical region of the conformational map. The dipeptide methylamide and the tripeptide carboxylic acid adopt a β-turn conformation with a 1 ← 4 C?O…?H? N intramolecular H bond. The structure of the tripeptide carboxylic acid is further stabilized by a 1 ← 4 C?O…?H? O intramolecular H bond, forming an “oxy-analogue” of a β-turn. The tetrapeptide ester is folded in a regular (incipient) 3₁₀-helix. In general, the relationship between (αMe)Phe chirality and helix screw sense is opposite to that exhibited by protein amino acids. A comparison is made with the conclusions extracted from published work on homopeptides from other C^α-methylated α-amino acids. © 1993 John Wiley & Sons, Inc.     

Homooligopeptides composed of hydrophobic amino acid residues interact in a specific manner by taking α-helix or β-structure toward lipid bilayers

In order to investigate the role of each amino acid residue in determining the secondary structure of the transmembrane segment of membrane proteins in a lipid bilayer, we made a conformational analysis by CD for lipid-soluble homooligopeptides, benzyloxycarbonyl-(Z-) Aaa_n-OEt (n = 5-7), composed of Ala, Leu, Val, and Phe, in three media of trifluoroethanol, sodium dodecyl sulfaie micelle, and phospholipid liposomes. The lipid-peptide interaction was also studied through the observation of bilayer phase transition by differential scanning cahrimetry (DSC). The CD studies showed that peptides except for Phe oligomers are present as a mainly random structure in trifluoroethanol, as a mixture of α-helix, β-sheet, β-turn, and /or random in micelles above the critical micellization concentration and preferably as an extended structure of α-helical or β-structure in dipalmitoyl-D,L -α-phosphatidylcholine (DPPC) liposomes of gel state. That the β-structure content of Val oligomers in lipid bilayers is much higher than that in micelles and the oligopeptides of Leu (n = 7) and Ala (n = 6) can take an α-helical structure with one to two turns in lipid bilayers despite their short chain lengths indicates that lipid bilayers can stabilize the extended structure of both α-helical and β-structures of the peptides. The DSC study for bilayer phase transition of DPPC / peptide mixtures showed that the Leu oligomer virtually affects neither the temperature nor the enthalpy of the transition, while Val and Ala oligomers slightly reduce the transition enthalpy without altering the transition temperature. In contrast, the Phe oligomer affects the phase transition in much more complicated manner. The decreasing tendency of the transition enthalpy was more pronounced for the Ala oligomer as compared with the Leu and Val oligomers, which means that the isopropyl group of the side chain has a less perturbing effect on the lipid acyl chain than the methyl group of Ala. © 1995 John Wiley & Sons, Inc.     

Chain length effects on helix-hairpin distribution in short peptides with Aib-DAla and Aib-Aib segments

The Aib-D Ala dipeptide segment has a tendency to form both type-I'/III' and type-I/III β-turns. The occurrence of prime turns facilitates the formation of β-hairpin conformations, while type-I/III turns can nucleate helix formation. The octapeptide Boc-Leu-Phe-Val-Aib-DAla-Leu-Phe-Val-OMe (1) has been previously shown to form a β-hairpin in the crystalline state and in solution. The effects of sequence truncation have been examined using the model peptides Boc-Phe-Val-Aib-Xxx-Leu-Phe-NHMe (2, 6), Boc-Val-Aib-Xxx-Leu-NHMe (3, 7), and Boc-Aib-Xxx-NHMe (4, 8), where Xxx=DAla, Aib. For peptides with central Aib-Aib segments, Boc-Phe-Val-Aib-Aib-Leu-Phe-NHMe (6), Boc-Val-Aib-Aib-Leu-NHMe (7), and Boc-Aib-Aib-NHMe (8) helical conformations have been established by NMR studies in both hydrogen bonding (CD3OH) and non-hydrogen bonding (CDCl3) solvents. In contrast, the corresponding hexapeptide Boc-Phe-Val-Aib-DAla-Leu-Phe-Val-NHMe (2) favors helical conformations in CDCl3 and β-hairpin conformations in CD3 OH. The β-turn conformations (type-I'/III) stabilized by intramolecular 4→1 hydrogen bonds are observed for the peptide Boc-Aib-D Ala-NHMe (4) and Boc-Aib-Aib-NHMe (8) in crystals. The tetrapeptide Boc-Val-Aib-Aib-Leu-NHMe (7) adopts an incipient 3(10)-helical conformation stabilized by three 4→1 hydrogen bonds. The peptide Boc-Val-Aib-DAla-Leu-NHMe (3) adopts a novel α-turn conformation, stabilized by three intramolecular hydrogen bonds (two 4→1 and one 5→1). The Aib-DAla segment adopts a type-I' β-turn conformation. The observation of an NOE between Val (1) NH?HNCH3 (5) in CD3OH suggests, that the solid state conformation is maintained in methanol solutions.     

Conformational analysis and molecular dynamics simulation of α-(1 → 2) and α-(1 → 3) linked rhamnose oligosaccharides: Reconciliation with optical rotation and NMR experiments

Molecular mechanics and dynamics calculations were carried out on the disaccharides α-L-Rhap-(1 → 2)-α-L-Rhap-(1 → OMe) (1) and α-L-Rhap-(1 → 3)-α-L-Rhap-(1 OMe) (2), and the trisaccharide α-L-Rhap-(1 → 2)-α-L-Rhap-(1 → 3)-α-L-Rhap-(1 → OMe) (3). The semiflexible conformational behavior of these molecules was characterized by the occupation of a combination of different glycosidic linkage and side-chain conformational positions whose relative occupations were sensitive to dielectric screening. Molecular dynamics simulations of the trisaccharide 3 showed little difference between the linkage conformations in the trisaccharide and the component disaccharides 1 and 2. Experimental optical rotation data of 1 and 2 were obtained as a function of temperature in varying solvents. The molecular models were combined with the semiempirical theory of Stevens and Sathyanarayana to yield calculated optical rotations. Interpretation of the data of both 1 and 2 implied that a combination of conformations, both in glycosidic and side-chain positions, could explain the experimental data. Solvents effects were important in influencing the conformational mix and averaged optical rotation. Three-bond heteronuclear coupling constants ³J_{C, H} were obtained for the glycosidic linkages of 1 and 2 in D₂O and DMSO. Analysis of the coupling constants with a Karplus curve showed that small reductions in the glycosidic torsion angles of the conformations of the models used here of ca. 10°–15° in ϕ and 5°–10° in ψ were required to give better agreement with experiment; a combination of conformations for both 1 and 2 was consistent with the data. There was a negligible influence on the coupling constants of 1 on changing the solvent from D₂O to DMSO. © 1997 John Wiley & Sons, Inc.     

Relationship between conformation and geometry as evidenced by molecular dynamics simulation of Cα,α-dialkylated glycines

The relationship between the local backbone conformation and bond angles at C^α of symmetrically substituted C^α,α-dialkylated glycines (C^α,α-dimethylglycine or α-aminoisobutyric acid, Aib; C^α,α-diethylglycine, Deg; C^α,α-di-n-propylglycine, Dpg) has been investigated by molecular dynamics (MD) simulation adopting flat bottom harmonic potentials, instead of the usual harmonic restraints, for the C^α bond angles. The MD simulations show that the C^α bond angles are related to the local backbone conformation, irrespectively of the side-chain length of Aib, Deg, and Dpg residues. Moreover, the N-C^α-C′ (τ) angle is the most sensitive conformational parameter and, in the folded form, is always larger and more flexible than in the extended one. © 1998 John Wiley & Sons, Inc. Biopoly 46: 239–244, 1998     

Design of Peptides Using α,β-Dehydro-residues: Synthesis,Crystal Structure and Molecular Conformation of N-Boc-L-Val-ΔPhe–ΔPhe-L-Ala-OCH3

To obtain general rules of peptide design using α,β-dehydro-residues, a sequence with two consecutive ΔPhe-residues, Boc-L -Val-ΔPhe–ΔPhe- L -Ala-OCH₃, was synthesized by azlactone method in solution phase. The peptide was crystallized from its solution in an acetone/water mixture (70:30) in space group P6₁ with a=b=14.912(3) Å, c= 25.548(5) Å, V=4912.0(6) ų. The structure was determined by direct methods and refined by a full matrix least-squares procedure to an R value of 0.079 for 2891 observed [I?3σ(I)] reflections. The backbone torsion angles ?₁=?54(1)°, ψ₁= 129(1)°, ω₁=?177(1)°, ?₂ =57(1)°, ψ₂=15(1)°, ω₂ =?170(1)°, ?₃=80(1)°, ψ₃ =7(2)°, ω₃=?177(1)°, ?₄ =?108(1)° and ψ^T₄=?34 (1)° suggest that the peptide adopts a folded conformation with two overlapping β-turns of types II and III′. These turns are stabilized by two intramolecular hydrogen bonds between the CO of the Boc group and the NH of ΔPhe³ and the CO of Val¹ and the NH of Ala⁴. The torsion angles of ΔPhe² and ΔPhe³ side chains are similar and indicate that the two ΔPhe residues are essentially planar. The folded molecules form head-to- tail intermolecular hydrogen bonds giving rise to continuous helical columns which run parallel to the c-axis. This structure established the formation of two β-turns of types II and III′ respectively for sequences containing two consecutive ΔPhe residues at (i+2) and (i+3) positions with a branched β-carbon residue at one end of the tetrapeptide.     

Design and synthesis of novel nonpolar host peptides for the determination of the 310- and α-helix compatibilities of α-amino acid buildig blocks: An assessment of α,α-disubstituted glycines

The present work describes three novel nonpolar host peptide sequences that provide a ready assessment of the 3₁₀- and α-helix compatibilities of natural and unnatural amino acids at different positions of small- to medium-size peptides. The unpolar peptides containing Ala, Aib, and a C-terminal p-iodoanilide group were designed in such a way that the peptides could be rapidly assembled in a modular fashion, were highly soluble in solvent mixtures of triflouroethanol and H₂O for CD- and two-dimensional (2D) nmr spectroscopic analyses, and showed excellent crystallinity suited for x-ray structure analysis. To validate our approach we synthesized 9-mer peptides 79a–96 (Table IV), 12-mer peptides 99–110c (Table V), and 10-mer peptides 120a–125d and 129–133 (Table VI and Scheme 8) incorporating a series of optically pure cyclic and open-chain (R)- and (S)-α,α-disubstituted glycines 1–10 (Figure 2). These amino acids are known to significantly modulate the conformations of small peptides. Based on x-ray structures of 9-mers 79a, 80, and 87 (Figures 4–7), 10-mers 124c, 131, and 132 (Figures 9–12), and 12-mer peptide 102b (Figure 13), CD spectra of all peptides recorded in acidic, neutral, and basic media and detailed 2D-nmr analyses of 9-mer peptide 86 and 12-mer 102b, several interesting conformational observations were made. Especially interesting results were obtained using the convex constraint CD analysis proposed by Fasman on 9-mer peptides 79a–d, 80, 81, 86, and 87, which allowed us to determine the relative content of 3₁₀- and α-helical conformations. These results were fully supported by the corresponding x-ray and 2D-nmr analyses. As a striking example we found that the (S)- and (R)-β-tetralin derived amino acids (R)- and (S)-1 show excellent α-helix stabilisation, more pronounced than Aib and Ala. These novel reference peptide sequences should help establish a scale for natural and unnatural amino acids concerning their intrinsic 3₁₀- and α-helix compatibilities at different positions of medium-sized peptides and thus improve our understanding in the folding processes of peptides. © 1997 John Wiley & Sons, Inc. Biopoly 42: 575–626, 1997     

Design of peptides using α,β-dehydro-residues: Synthesis,crystal structure and molecular conformation of Boc-L-Val- ΔPhe-ΔPhe-L-Val-OCH3

The peptide Boc-L-Val-ΔPhe-ΔPhe-L-Val-OCH₃ was synthesized by the azlactone method in solution phase, and its crystal and molecular structures were determined by x-ray diffraction method. Single crystals were grown by slow evaporation from a methanol/water solution at 6°C. The crystals belong to an orthorhombic space group P2₁2₁2₁ with a = 10.478 (6) Å, b = 13.953 (1), c = 24.347 (2) and Z = 4. The structure was determined by direct methods and refined by least squares procedure to an R value of 0.052. The structure consists of a peptide and a water molecule. The peptide adopts two overlapping β-turn conformations of Types II and I′ with torsion angles: ϕ₁ = -54.8 (6), ψ₁ = 130.5 (4), ϕ₂ = 65.8 (5), ψ₂ = 12.8 (6), ϕ₃ = 79.4 (5), ψ₃ = 3.9 (7)°. The conformation is stabilized by intramolecular hydrogen bonds involving Boc CO and NH of ΔPhe³ and CO of Val¹ and NH of Val⁴. The molecules are tightly packed in the unit cell. The crystal structure is stabilized by hydrogen bonds involving NH of ΔPhe² and CO of a symmetry related (x-½, ½ -y, -z) ΔPhe². The solvent-water molecule forms two hydrogen bonds with peptide molecule involving NH of Val¹ as an acceptor and another with CO of a symmetry related (1 -x, y-½, ½ -z) ΔPhe³ as a donor. These studies indicate that a tetrapeptide with two consecutive ΔPhe residues sequenced with valines on both ends adopts two overlapping β-turns of Types II and I′. © 1996 John Wiley & Sons, Inc.     

Studies on the conformation of amino acids. IX. Conformations of butyl, seryl, threonyl, cystennyl, and valyl residues in a dipeptide unit

Potential energies of conformation of a dipeptide unit with butyl, seryl, threonyl, eysteinyl, and valyl side groups have been computed by using classical energy expressions. The presence of a γ-atom introduces characteristic restrictions on the backbone rotational angles ? and ψ the γ-atom itself is restricted to three staggered positions about the C^α—C^β bond. The important results are that a γ-carbon in position I (χ¹ ? 60°) cannot be accommodated in the standard right-and left-handed α-helices, whereas a γ-oxygen or sulfur could easily be accommodated in the right-handed α-helix. Further, a γ-carbon or a heteroatom in position II (χ¹ ? 180°) does not favor a conformation ψ ? 180°, compared to two other positions. The valyl side group significantly reduces the allowed ? and ψ values and energetically prefers a β-conformation compared to right-or left-handed α-helical conformations. The less favorable α-helical conformation is possible only for γ (III, II) combination of the valyl residue. The observed ?, ψ, and χ¹ values of all the amino acid residues in the three protein molecules, lysozyme, myoglobin, and chymotrypsin are compared with the theoretical predictions and the agreement is excellent. The results bring out the important fact that even in large molecules, the conformation of local segments are predominantly governed by the short-range intramolecular interactions.     

Vibrational analysis of peptides,polypeptides, and proteins. XVIII. Conformational sensitivity of the α-helix spectrum: αI- and αII-Poly(L-alanine)

The α_II-helix (? = ?70.47°, ψ = ?35.75°) is a structure having the same n and h as the (standard) α_I-helix (? = ?57.37°, ψ = ?47.49°). Its conformational angles are commonly found in proteins. Using an improved α-helix force field, we have compared the vibrational frequencies of these two structures. Despite the small conformational differences, there are significant predicted differences in frequencies, particularly in the amide A, amide I, and amide II bands, and in the conformation-sensitive region below 900 cm^?1. This analysis indicates that α_II-helices are likely to be present in bacteriorhodopsin [Krimm, S. & Dwivedi, A. M. (1982) Science 216 , 407–408].     

Role of two consecutive α,β-dehydrophenylalanines in peptide structure: Crystal and molecular structure of Boc-Leu-ΔPhe-ΔPhe-Ala-Phe-NHMe

An N^α-protected model pentapeptide containing two consecutive ΔPhe residues, Boc-Leu-ΔPhe-ΔPhe-Ala-Phe-NHMe, has been synthesized by solution methods and fully characterized. ¹H-nmr studies provided evidence for the occurrence of a significant population of a conformer having three consecutive, intramolecularly H-bonded β-bends in solution. The solid state structure has been determined by x-ray diffraction methods. The crystals grown from aqueous methanol are orthorhombic, space group P2₁2₁2₁, a = 11.503(2), b = 16.554(2), c = 22.107(3) Å, V = 4209(1) Å,³ and Z = 4. The x-ray data were collected on a CAD4 diffractometer using CuK_a radiation (λ = 1.5418 Å). The structure was determined using direct methods and refined by full-matrix least-squares procedure. The R factor is 5.3%. The molecule is characterized by a right handed 3₁₀-helical conformation (〈ϕ〉 = −68.2°, 〈ψ〉 = −26.3°), which is made up of two consecutive type III β-bends and one type I β-bend. In the solid state the helical molecules are aligned head-to-tail, thus forming long rod like structures. A comparison with other peptide structures containing consecutive ΔPhe residues is also provided. The present study confirms that the -ΔPhe-ΔPhe-sequence can be accommodated in helical structures. © 1997 John Wiley & Sons, Inc. Biopoly 42: 373–382, 1997     

A search for the ideal type I β-turn

In 1968 C. Venkatachalam (Biopolymers, Vol. 6, pp. 1425–1436) predicted the ideal forms of β-turns (type I, type II, etc.) based entirely on theoretical calculations. Subsequently, over a thousand x-ray structures of different globular proteins have been analyzed, with results suggesting that the most important form among the hairpin conformers is the type I β-turn. For the latter type of hairpin conformation, the original computations had predicted ϕ_i+1 = −60°, ψ_i+1 = −30°, ϕ_i+2 = −90°, and ψ_i+2 = 0° as backbone torsion angle values, and these have been used from that time as reference values for the identification of the type I β-turn. However, it has never been clarified whether these “ideal” backbone torsion angle values exist in real structures, or whether these torsion angles are only “theoretical values.” Using the most recent release of the Protein Data Bank (1994), a survey has been made to assign amino acid pairs that approach the ideal form of the type I β-turn. The analysis resulted in four sequences where the deviation from ideal values for any main-chain torsion angles was less than 2°. In order to determine whether such a backbone fold is possible only in proteins owing to fortuitous cooperation of different folding effects, or whether it occurs even in short peptides, various attempts have been made to design the optimal amino acid sequence. Such a peptide model compound adopting precisely the predicted torsion angle values [ϕ_i+1 = −60°, ψ_i+1 = −30°, ϕ_i+2 = −90°, and ψ_i+2 = 0°] could provide valuable information. The solid state conformation of cyclo[(δ) Ava-Gly-Pro-Thr (O¹Bu)-Gly] reported herein, incorporating the -Pro-Thr- subunit, yields values suggesting that the “ideal” type I β-turn is even possible for a peptide where there are no major environmental effects present. © 1996 John Wiley & Sons, Inc.     

Synthesis,and crystal and molecular structure of the 310-helical α,β-dehydro pentapeptide Boc-Leu-Phe-Ala-ΔPhe-Leu-Ome

α,β-Dehydro amino acid residues are known to constrain the peptide backbone to the β-bend conformation. A pentapeptide containing only one α,β dehydrophenylalanine (ΔPhe) residue has been synthesized and crystallized, and its solid state conformation has been determined. The pentapeptide Boc-Leu-Phe-Ala-ΔPhe-Leu-OMe (C₃₉H₅₅N₅O₈, M_w = 721.9) was crystallized from aqueous methanol. Monoclinic space group was P2₁, a = 10.290(2)°, b = 17.149(2)°, c = 12.179(2) Å, β = 96.64(1)° with two molecules in the unit cell. The x-ray (Mo K_α, λ = 0.7107A) intensity data were collected using a CAD4 diffractometer. The crystal structure was determined by direct methods and refined using least-squares technique. R = 4.4% and R_w = 5.4% for 4403 reflections having |F₀| ≥ 3σ(|F₀|). All the peptide links are trans and the pentapeptide molecule assumes 3₁₀-helical conformation. The mean ?,ψ values, averaged over the first four residues, are ?64.4°, ?22.4° respectively. There are three 4 → 1 intramolecular hydrogen bonds, characteristic of 3₁₀,-helix. In the crystal, the peptide helices interact through two head-to-tail. N? H? O intermolecular hydrogen bonds. The peptide molecules related by 2₁, screw symmetry form a skewed assembly of helices. © 1995 John Wiley & Sons, Inc.