The synthesis of the tripodal phosphine CH3C{CH2P(m-CF3C6H4)2}3 and its rhodium coordination chemistry

The new tripodal phosphine CH₃C{CH₂P(m-CF₃C₆H₄)₂}₃, CF₃PPP, was prepared by reacting CH₃C(CH₂Br)₃ with Li⁺P(m-CF₃C₆H₄)₂⁻, the latter being best obtained by adding Li⁺NⁱPr₂⁻ to PH(m-CF₃C₆H₄)₂. The rhodium complexes [RhCl(CO)(CF₃PPP)], [Rh(LL)(CF₃PPP)](CF₃SO₃) (LL = 2 CO or NBD), [RhX₃(CF₃PPP)], [RhX(MeCN)₃(CF₃PPP)](CF₃SO₃)₂ (X = H and Cl), [RhCl₂(MeCN)(CF₃PPP)](CF₃SO₃) and [Rh(MeCN)₃(CF₃PPP)](CF₃SO₃)₃ were prepared and characterized. The X-ray crystal structure of [Rh(NBD)(CF₃PPP)](CF₃SO₃) is reported. The lower oxygen sensitivity of the CF₃PPP rhodium(I) complexes, relative to the corresponding species with the parent ligand CH₃C(CH₂PPh₂)₃, is attributed to the higher effective nuclear charge on the metal centers caused by the presence of the six CF₃ substituents on the terdentate phosphine. A similar effect may be responsible for the easier hydrolysis of the CF₃PPP-containing, cationic rhodium(III) complexes relative to the corresponding compounds of the parent ligand.     

Dioxo-molybdenum(VI) and -tungsten(VI) BINOL and alkoxide complexes: Synthesis and catalysis in sulfoxidation, olefin epoxidation and hydrosilylation of carbonyl groups

The reaction of MoO₂(mes)₂ with S-H₂BINOL (mes = 2,4,6-Me₃C₆H₂; H₂BINOL = 1,1′-bi-2-naphthol) and (CF₃)₂MeCOH in THF yielded the novel dioxo-molybdenum(VI) complexes MoO₂(S-BINOL)(THF)₂ and MoO₂[OCMe(CF₃)₂]₂(THF), respectively. Similar tungsten derivatives WO₂(S-BINOL)(THF) and WO₂[OCMe(CF₃)₂]₂(THF) have been prepared by the reaction of WO₂Cl₂(DME) with the corresponding lithium salts of BINOL and 1,1,1,3,3,3-hexafluoro-2-methyl-2-propanol, respectively. Catalytic experiments have shown that MoO₂(S-BINOL)(THF)₂ is an active catalyst in the sulfoxidation of methyl phenyl sulfide and in the epoxidation of cis-cyclooctene with tert-butylhydroperoxide, under mild conditions. The BINOL complex was, however, not found to be enantioselective. In addition, the catalytic activity of the molybdenum species MoO₂(S-BINOL)(THF)₂ and MoO₂[OCMe(CF₃)₂]₂(THF) in the hydrosilylation of carbonyl groups has been explored.     

Ligand induced P---H bond formation and a comparison of the reactivity of two isomers of the carbonyl hydride [Pt2(μ-PBu2)2(H)(CO)(PBu2H)]CF3SO3

The Pt₂ ^(II) isomeric terminal hydrides [(CO)(H)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)]CF₃SO₃ (1a), and [(CO)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)(H)]CF₃SO₃ (1b), react rapidly with 1 atm of carbon monoxide to give the same mixture of two isomers of the Pt₂ ^(I) dicarbonyl [Pt₂(μ-PBu^t ₂)(CO)₂(PBu^t ₂H)₂]CF₃SO₃ (3-Pt); the solid state structure of the isomer bearing the carbonyl ligands pseudo-trans to the bridging phosphide was solved by X-ray diffraction. A remarkable difference was instead found between the reactivity of 1a and 1b towards carbon disulfide or isoprene. In both cases 1b reacts slowly to afford [Pt₂(μ-PBu^t ₂)(μ,η²,η²-CS₂)(PBu^t ₂H)₂]CF₃SO₃ (4-Pt), and [Pt₂(μ-PBu^t ₂)(μ,η²,η²-isoprene) (PBu^t ₂H)₂]CF₃SO₃ (6-Pt), respectively. In the same experimental conditions, 1a is totally inert. A common mechanism, proceeding through the preassociation of the incoming ligand followed by the P---H bond formation between one of the bridging P atoms and the hydride ligand, has been suggested for these reactions.     

Syntheses and characterization of copper complexes with the ligand 2-aminoethyl(2-pyridylmethyl)-1,2-ethanediamine (apme)

Copper(I)/(II) complexes with the ligand 2-aminoethyl(2-pyridylmethyl)1,2-ethanediamine (apme, abbreviated as PDT in the literature as well) were prepared and characterized. Crystal structures of the copper(I) complexes, [Cu₂(apme)₂]X₂ (1, 2; X = ClO₄, CF₃SO₃), showed that they are dinuclear, in contrast to the trigonal bipyramidal copper(II) complexes [Cu(apme)Cl]BPh₄ (3) and [Cu(apme)(DMF)](BPh₄)₂ (4). 1 and 2 could be investigated in solution by NMR spectroscopy and 3 and 4 by cyclovoltammetry. From the results of these studies it is clear that in solution equilibria between the dinuclear complexes 1/2 and another species exist, most likely the monomeric [Cu(apme)CH₃CN]⁺. Time-resolved UV/vis spectra at low temperatures allowed the spectroscopic detection of dioxygen adduct complexes as reactive intermediates during the oxidation of 1/2 with dioxygen that seem to play an important role in copper enzymes such as peptidylglycine--hydroxylating monooxygenase (PHM).     

The synthesis and reactivity of electrophilic iridium (III) complexes containing bis (diphenylphosphino) ethane

The complex Ir(CH₃) (CO) (CF₃SO₃)₂ (dppe) (1) has been synthesized from the reaction of Ir(CH₃)I₂(CO) (dppe) and silver triflate. Methane and IrH(CO) (CF₃SO₃)₂ (dppe) (2) are formed when a methylene chloride solution of 1 is placed under 760 torr dihydrogen. Conductivity studies indicate that methylene chloride solutions of complexes 1 and 2 are weak electrolytes and only partially ionized at concentrations above 1 mM. Complex 2 is an effective hydrogenation catalyst for ethylene and 1-hexene while acetone hydrogenation is inhibited by the formation of [IrH₂(HOCH(CH₃)₂) (CO) (dppe)] (OTf) (3). Linear dimerization and polymerization of styrene occurs via a carbocationic mechanism initiated by triflic acid elimination from 2. Treatment of an acetonitrile solution of Ir(CH₃)I₂(CO) (dppe) with silver hexafluorophosphate produces the solvent promoted carbonyl insertion product [Ir(C(O)CH₃) (NCCH₃)₃ (dppe)] [PF₆]₂ (7) which readily undergoes deinsertion in methylene chloride to form [Ir(CH₃) (CO) (NCCH₃)₂ (dppe)] [PF₆]₂ (8) and acetonitrile.     

Alkene rotation in [Ru(η-C5H5) (L2) (η-alkene][CF3SO3] with L2 = iPr- or pTol-diazabutadiene. X-ray crystal structure of [Ru(η-C5H5(pTol-DAB) (η-ethene][CF3SO3]

Reaction of RuCl(η⁵-C₅H₅(pTol-DAB) with AgOTf (OTf = CF₃SO₃) in CH₂Cl₂ or THF and subsequent addition of L′ (L′ = ethene (a), dimethyl fumarate (b), fumaronitrile (c) or CO (d) led to the ionic complexes [Ru(η⁵-C₅H₅)(pTol-DAB)(L′)][OTf] 2a, 2b and 2d and [Ru(η⁵-C₅H₅)(pTol-DAB)(fumarontrile-N)][OTf] 5c. With the use of resonance Raman spectroscopy, the intense absorption bands of the complexes have been assigned to MLCT transitions to the iPr-DAB ligand. The X-ray structure determination of [Ru(η⁵-C₅H₅)(pTol-DAB)(η²-ethene)][CF₃SO₃] (2a) has been carried out. Crystal data for 2a: monoclinic, space group P2₁/n with A = 10.840(1), b = 16.639(1), C = 14.463(2) Å, β = 109.6(1)°, V = 2465.6(5) ų, Z = 4. Complex 2a has a piano stool structure, with the Cp ring η⁵-bonded, the pTol-DAB ligand σN, σN′ bonded (Ru-N distances 2.052(4) and 2.055(4) Å), and the ethene η²-bonded to the ruthenium center (Ru-C distances 2.217(9) and 2.206(8) Å). The C = C bond of the ethene is almost coplanar with the plane of the Cp ring, and the angle between the plane of the Cp ring and the double of the ethene is 1.8(0.2)°. The reaction of [RuCl(η⁵-C₅H₅)(PPh)₃ with AgOTf and ligands L′ = a and d led to [Ru(η⁵-C₅H₅)(PPh₃)₂(L′)]OTf] (3a) and (3d), respectively. By variable temperature NMR spectroscopy the rottional barrier of ethene (a), dimethyl fumarate (b and fumaronitrile (c) in complexes [Ru(η⁵-C₅H₅)(L₂)(η²-alkene][OTf] with L₂ = iPr-DAB (a, 1b, 1c), pTol-DAB (2a, 2b) and L = PPh₃ (3a) was determined. For 1a, 1b and 2b the barrier is 41.5±0.5, 62±1 and 59±1 kJ mol⁻¹, respectively. The intermediate exchange could not be reached for 1c, and the ΔG^# was estimated to be at least 61 kJ mol⁻. For 2a and 3a the slow exchange could not be reached. The rotational barrier for 2a was estimated to be 40 kJ mol⁻. The rotational barier for methyl propiolate (HC≡CC(O)OCH₃) (k) in complex [Ru(η⁵-C₅H₅)(iPr-DAB) η²-HC≡CC(O)OCH₃)][OTf] (1k) is 45.3±0.2 kJ mol⁻¹. The collected data show that the barrier of rotational of the alkene in complexes 1a, 2a, 1b, 2b and 1c does not correlate with the strength of the metal-alkene interaction in the ground state.     

Macrocylic thioether-esters and thioether-thioesters and their palladium, platinum and silver complexes

Preparations by the high dilution method are reported for seven macrocyclic thioether-esters and thioether-thioesters (L1–;L7). Yields in these reactions between thiodiglycolyl dichloride and appropriate ,ω-diols or dithiols range from 10 to 51%. The compounds are characterized by ¹H and ¹³C NMR, IR and high resolution mass spectroscopy. They react with salts of Pd(II), Pt(II) and Ag(I) to form complexes of which MX₂·L2, (M = Pt, X = Cl; M = Pd, X = Cl, Br, I, SCN), [Pd(L2)₂][CF₃SO₃]₂·H₂O and [Ag(L5)₂][CF₃SO₃]·C₂H₅OH have been isolated and characterized by elemental analysis, IR and NMR spectroscopy. NMR spectra indicate reversible dissociation of the ligand occurs in dimethyl sulfoxide solvent for PdCl₂·L2 but not for the Pt analogue. For PtCl₂·L2, spectra indicate that the ligand is undergoing a conformational ‘wag’ about its pair of equivalent sulfurs. These remain bound to the metal while the unique sulfur moves from the apical position of the coordination sphere to a non-coordinated situation. Simultaneously, inversions at the bound sulfurs are occurring.     

Facile and stereoselective condensation of acetone with ammonia ligands on cobalt(III): structure of a N-bonded cyanate complex containing the 2-methyl-2-amino-4-imino-pentane ligand

The complex [(NH₃)₅CoO₃SCF₃](CF₃SO₃)₂ reacts with excess NaNCO in warm acetone solution to give, stereoselectively, a Schiff base complex (40%) which has been characterized by standard NMR techniques as one of the six isomers of [Co{NH₂C(CH₃)₂CH₂C(CH₃)=NH}₂(NH₃)NCO](ClO₄)₂ · H₂O, confirmed by a single crystal X-ray structural analysis. Schiff base formation in non-basic conditions for kinetically inert Co(III) complexes is unprecedented. Also, this is only the second cyanate complex of pentaaminecobalt(III) to be structurally characterized (CoNCO: Co–N, 1.908 Å; N–C, 1.152 Å; C–O, 1.206 Å; Co–N–C, 170°; N–C–O, 177°).     

Synthesis, spectroscopic properties and X-ray crystal structures of two dinuclear alkoxo-bridged copper(II) compounds with the ligand bis(1-methyl-2-benzimidazolyl) propane. A unique alkoxo-bridged Cu(II) dinuclear compound with an additional bidentate bridging triflate anion

Based on the new ligand bis(1-methyl-2-benzimidazolyl) propane (abbreviated as mtbz) several new copper(II) coordination compounds have been prepared and characterized structurally and spectroscopically. Two representative compounds, i.e. [Cu₂(mtbz)₂(CH₃)₂- (CF₃SO₃)](CF₃SO₃) (1) and [Cu₂(mtbz)₂(CH₃O)₂](ClO₄)₂ (4) were characterized structurally by X-ray diffraction. Crystal data for 1: monoclinic, space group P2₁/c, a=13.6585(5), B=39.981(3), C=20.919(1) Å, β=125.98(1)°, Z=8. Crystal data for 4: monoclinic, space group P2₁/c, a=13.115(2), B=9.523(2), C=17.908(4) Å, β=111.71(1)°, Z=2. Structures 1 and 4 each consist of a dinuclear unit with bridging methoxo groups and one ligand linked to each copper via an N atom. Structure 1 (which consists of two dinuclear, crystallographically independent, but chemically identical units) has the two copper atoms bridged by a triflate anion, providing each copper atom a square-pyramidal coordination, while the copper atoms in structure 4 have an almost a square-planar geometry. The Cu---Cu distances (Å) within the dinuclear units are: 1, 2.9775(13), 2.9751(13); 4, 2.9872(16); the Cu---O---Cu bridging angles (°) are: 1, 101.7(3), 101.7(3), 100.9(3), 102.1(3); 4, 103.2(2). The mid-IR section focused on the vibrations of the triflate anion reveals interesting results concerning the assignments of that anion related to the v_as(S---O) band. Characteristic Cu---O vibrations in the far-IR section were found at 386 and 230 cm⁻¹ for the methoxo-bridged and 454 and 332 cm⁻¹ for the ethoxo-bridged compounds. These dinuclear species are EPR silent, and only a weak signal of monomeric impurities is observed. They also show a diamagnetic behavior below room temperature.     

Spin-crossover iron(II) complexes [Fe(Medpq)(py)2(NCS)2] and [Fe(Medpq)(py)2(NCSe)2]: syntheses, characterization and magnetic properties

Two new spin-crossover complexes, [Fe(Medpq)(py)₂(NCS)₂] · py · 0.5H₂O (1) and [Fe(Medpq)(py)₂(NCSe)₂] · py (2) (Medpq = 2-methyldipyrido[3,2-f:2′,3′-h]-quinoxaline, py = pyridine), have been synthesized. The crystal structures were determined at both room temperature (298 K) and low temperature (110 K). Complexes 1 and 2 crystallize in the orthorhombic space group Pbca and monoclinic space group P2₁/n, respectively. In both complexes, the distorted [FeN₆] octahedron is formed by six nitrogen atoms from Medpq, the trans pyridine molecules and the cis NCX⁻ groups. The thermal spin transition is accompanied by the shortening of the mean Fe–N distances by 0.194 Å for 2. The mononuclear [Fe(Medpq)(py)₂(NCS)₂] and [Fe(Medpq)(py)₂(NCSe)₂] neutral species interact each other via π-stacking, resulting in a one-dimensional extended structure for both 1 and 2. There exist C–HX (X = S, Se) hydrogen bonds for both complexes. Variable-temperature magnetic susceptibility measurements and Mössbauer spectroscopy reveal the occurrence of a gradual spin transition. The transitions are centered at T_1/2 = 120 K for 1 and T_1/2 = 180 K for 2, respectively.     

Synthesis and anticancer evaluation of certain indolo[2,3-b]quinoline derivatives

The present report describes the synthesis and anticancer evaluation of certain 11-substituted 6H-indolo[2,3-b]quinolines and their methylated derivatives. These 6H-indolo[2,3-b]quinoline derivatives 11–13 were prepared from the commercially available 1,4-dihydroxyquinoline through alkylation, chlorination, nucleophilic reaction, and ring cyclization. Depending on the ratio of 11, (MeO)₂SO₂, and K₂CO₃, alkylation occurred primarily on N-5 (1:0.8:0.8) or N-6 (1:1.5:1.5) leading to the isolation of 14a or 14b as a major product. Accordingly, major product 15a (2/(MeO)₂SO₂/K₂CO₃ = 1:2:2) or 15b (1:1:1), respectively, was obtained by alkylation of 12 while 16a (13/(MeO)₂SO₂/K₂CO₃ = 1:2:2) or 16b (1:1:1), respectively, was obtained by alkylation of 13. The in vitro anticancer assay indicated 5-methylated derivatives 14a, 15a, 16a are more cytotoxic than their respective 6-methylated counterparts 14b, 15b, 16b and 6H-indolo[2,3-b]quinoline precursors 11, 12, 13. Among them, 11-(4-methoxyanilino)-6-methyl-6H-indolo[2,3-b]quinoline (16a) was the most cytotoxic with a mean GI₅₀ value of 0.78 μM and also exhibited selective cytotoxicities for HL-60 (TB), K-562, MOLT-4, RPMI-8226, and SR with GI₅₀ values of 0.11, 0.42, 0.09, 0.14, and 0.19 μM, respectively.     

Studies on the reactivity of organometallic Ru-, Rh- and Os-pta complexes with DNA model compounds

The reactions of arene–metal complexes (arene = p-cymene, benzene or pentamethylcyclopentadienyl, metal = Ru, Rh or Os), including 1,3,5-triaza-7-phosphatricyclo-[3.3.1.1]decanephosphine (pta) and chloro co-ligands, with 9-methylguanine, adenine, and a series of nucleosides were studied in water to ascertain the binding modes. The products were characterized by NMR spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Tandem mass spectrometry was found to provide excellent information on preferential binding sites. In general, the N7 position on guanine (the most basic site) was found to be the preferred donor atom for coordination to the metal complexes. The X-ray structures of the precursor complexes, [(η⁵-C₁₀H₁₅)RhCl(pta-Me)₂]Cl₂, [(η⁶-C₁₀H₁₄)OsCl(pta)₂]Cl, and [(η⁶-C₆H₆)OsCl₂(CH₃CN)], are also reported.     

Synthesis and characterization of polypyridineruthenium(II) complexes containing a linear ambidentate ligand, NCO or NCS, and reaction of isocyanato complexes under acidic conditions

Isocyanato and isothiocyanatopolypyridineruthenium complexes, [Ru(NCX)Y(bpy)(py)₂]ⁿ⁺ (bpy=2,2′-bipyridine, PY=pyridine; X=O, Y=NO₂ for n=0, and Y=py for n=1; X=S, Y=NO₂ for n=0, Y=NO for n=2, and Y=py for n=1), were synthesized by the reaction of polypyridineruthenium complexes with potassium cyanate or sodium thiocyanate salt. Isocyanatoruthenium(II) complexes, [Ru(NCO)(NO₂)(bpy)(py)₂] and [Ru(NCO)(bpy)(py)₃]⁺, react under acidic conditions to form the corresponding ammineruthenium complexes, [Ru(NO)(NH₃)(bpy)(py)₂]³⁺. The molecular structures of [Ru(NCO)(bpy)(py)₃]ClO₄, [Ru(NCS)(NO)(bpy)(py)₂](PF₆)₂ and [Ru(NO)(NH₃)(bpy)(py)₂](PF₆)₃ were determined by X-ray crystallography.     

Serendipitous syntheses of Rh(H)2Cl(PRPh2)3 complexes, and their crystal structures, where R = Me, Cy (cyclohexyl)

Reactions of RhCl(cod)(THP) (cod = 1,5-cyclooctadiene; THP = P(CH₂OH)₃) with PMePh₂ or PCyPh₂ (Cy = cyclohexyl) in acetone/MeOH solution under H₂ surprisingly form the complexes cis, mer-Rh(H)₂Cl(PRPh₂)₃ (R = Me or Cy); both complexes are characterized by crystallography (the first structures in which the hydride ligands of such dihydrido-chloro-trisphosphine complexes have been located), and by detailed ¹H and ³¹P NMR spectroscopy. The key role of the THP in the observed chemistry is discussed.     

Mono-η complexes of chromium(II) and chromium(0). Electron demanding substituents, structural and spectroscopic data comparisons

Using thermal and photochemical methods a series of new chromium complexes has been prepared: (ν⁶-p-C₆H₄F₂)Cr(CO)₃; (ν⁶-C₆H₅CF₃)Cr(CO)₃; [m-C₆H₄(CF₃)₂]Cr(CO)₃; (ν⁶-C₆H₅F)Cr(CO)₂H(SiCl₃); (ν⁶-C₆H₅F)Cr(CO)₂(SiCl₃)₂; (p-C₆H₄F₂)Cr(CO)₂-H(SiCl₃); (C₆H₅CF₃)Cr(CO)₂H(SiCl₃(p-C₆H₄F₂)Cr(CO)₂(SiCl₃)₂; C₆H₅CF₃)Cr(CO)₂(SiCl₃)₂; [m-C₆H₄(CF₃)₂]Cr(CO)₂-H(SiCl₃); [m-C₆H₄(CF₃)₂]Cr(CO)₂(SiCl₃)₂. Two compounds were structurally characterized by X-ray diffraction. These data combined with IR and ¹H NMR have allowed assessment of some of the electronic and steric effects. The Cr-arene bond is considerably longer in the Cr(II) derivatives than in the Cr(0) species. Also the Cr center, as might be expected, is less electron rich in the Cr(II) dicarbonyl disilyl derivatives. The ν⁶-p-C₆H₄F₂ ligands are slightly folded so that the C---F carbons are moved further away from the Cr center. Comparison of structural and electronic effects is made with a series of similar chromium compounds reported in the literature. These new (arene)Cr(II) derivatives possess more labile ν⁶-arene ligands, which promise a rich chemistry at the chromium center.     

Hetero-polynuclear complexes containing bridging diphenylphosphino-alkenes and -alkynes. The crystal structure of an Rh2{μ−ν:ν−P(Ph2) (CH2)3C≡CR}Co2 complex

The phosphinoalkenes Ph₂P(CH₂)_nCH=CH₂ (n= 1, 2, 3) and phosphinoalkynes Ph₂P(CH₂)_n C≡CR (R = H, N = 2, 3; R = CH₃, N = 1) have been prepared and reacted with the dirhodium complex (η−C₅H₅)₂Rh₂(μ−CO) (μ−η²−CF₃C₂CF₃). Six new complexes of the type (ν−C₅H₅)₂(Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃)L, where L is a P-coordinated phosphinoalkene, or phosphinoalkyne have been isolated and fully characterized; the carbonyl and phosphine ligands are predominantly trans on the Rh---Rh bond, but there is spectroscopic evidence that a small amount of the cis-isomer is formed also. Treatment of the dirhodium-phosphinoalkene complexes with (η−CH₃C₅H₄)Mn(CO)₂thf resulted in coordination of the manganese to the alkene function. The Rh₂---Mn complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂P(CH₂)₃CH=CH₂} (η−CH₃C₅H₄)Mn(CO)₂] was fully characterized. Simi treatment of the dirhodium-phosphinoalkyne complexes with Co₂(CO)₈ resulted in the coordination of Co₂(CO)₆ to the alkyne function. The Rh₂---Co₂ complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂PCH₂C≡CCH₃}Co₂(CO)₂], C₃₇H₂₅Co₂F₆O₇PRh₂, was fully characteriz spectroscopically, and the molecular structure of this complex was determined by a single crystal X-ray diffraction study. It is triclinic, space group (C_i¹, No. 2) with a = 18.454(6), B = 11.418(3), C = 10.124(3) Å, = 112.16(2), β = 102.34(3), γ = 91.62(3)°, Z = 2. Conventional R on |F| was 0.052 fo observed (I > 3σ(I)) reflections. The Rh₂ and Co₂ parts of the molecule are distinct, the carbonyl and phosphine are mutually trans on the Rh---Rh bond, and the orientations of the alkynes are parallel for Rh₂ and perpendicular for Co₂. Attempts to induce Rh₂Co₂ cluster formation were unsuccessful.     

Reactivity study of cyclopentadienyl osmium(II) bisphosphine azido complexes with activated alkynes and nitriles: Isolation of osmium triazolato and tetrazolato complexes by 1,3-dipolar addition

The cyclopentadienyl osmium(II) complexes [(η⁵-C₅H₅)Os(PPh₃)₂X] [X = Br (1), CH₃CN (2)] reacts with sodium azide (NaN₃) to yield the corresponding azido complex [(η⁵-C₅H₅)Os(PPh₃)₂N₃] (3). This undergoes [3+2] dipolar cycloaddition reaction with activated alkynes like dimethyl and diethyl acetylenedicarboxylate to yield triazolato complexes [(η⁵-C₅H₅)Os(PPh₃)₂{N₃C₂(CO₂R)₂}] [R = –CH₂CH₃ (4) and –CH₃ (5)]. The complex 3 also reacts with nitriles such as tetracyanoethylene (TCE), fumaronitrile and p-nitrobenzonitrile to yield complexes of the type [(η⁵-C₅H₅)Os(PPh₃)₂{N₄C₂(CN)C(CN)₂}] (6), [(η⁵-C₅H₅)Os(PPh₃)₂{N₃C₂HCN}] (7) and [(η⁵-C₅H₅)Os(PPh₃)₂{N₄C(C₆H₄–p-NO₂)}] (8). These complexes were fully characterized on the basis of microanalyses, FT-IR and NMR spectroscopic data. The molecular structure of the representative complex [(η⁵-C₅H₅)Os(PPh₃)₂{N₃C₂(CO₂CH₂CH₃)₂}] (4) was determined by single crystal X-ray analysis.     

Labeling studies of some carbonylation reactions of styrene with cationic palladium complexes

The dicarbonylation reaction of E-β-deuteriostyrene to syndiotactic poly(1-oxo-2-phenyltrimethylene) as well as to dimethyl-2-phenylbutanedioate and dimethyl-2,5-diphenyl-4-oxoheptanedioate using Pd(CF₃COO)₂/2,2′-bipyridine as the catalyst precursor in the presence of 1,4-benzoquinone in methanol takes place stereospecifically in a syn-fashion with complete retention of the label. The same result was found for the dicarbonylation to dimethyl 2-phenylbutanedioate catalyzed by [Pd(CF₃COO)₂(Diop)]. In the absence of the oxidant the latter catalytic system produces methyl 2- and 3-phenylpropionates for which some scrambling of deuterium is observed when using either -deuteriostyrene or CH₃OD as the labeled substrate. [Pd(CH₃CN)₄][BF₄]₂ modified with different ligands catalyses the formation of E-1,5-diphenylpent-1-en-3-one or of E-1,4-diphenylpent-1-en-3-one in tetrahydrofuran as the solvent. The label distribution using E-β-deuteriostyrene as the substrate (or styrene in the presence of dideuterium) suggests that in the synthesis of ketones catalyzed by [Pd(p-CH₃C₆H₄SO₃)₂(Dppp)]·2H₂O the regioselectivity of the first inserted olefin unit does not determine the ketone regioisomer; rather which regioisomeric product preferentially forms depends on the rate of carbon monoxide insertion in either the branched or linear metal-hydrocarbyl intermediate. β-Hydrogen elimination is very rapid both after the first and the second olefin insertion.     

Variation of DNA photocleavage efficiency for [(TL)2Ru(dpp)]Cl2 complexes where TL=2,2'-bipyridine, 1,10-phenanthroline, or 4,7-diphenyl-1,10-phenanthroline

The complexes [(bpy)₂Ru(dpp)]Cl₂, [(phen)₂Ru(dpp)]Cl₂, and [(Ph₂phen)₂Ru(dpp)]Cl₂ (where dpp = 2,3-bis(2-pyridyl)pyrazine, bpy = 2,2′-bipyridine, phen = 1,10-phenanthroline, Ph₂phen = 4,7-diphenyl-1,10-phenanthroline) have been investigated and found to photocleave DNA via an oxygen-mediated pathway. These light absorbing complexes possess intense metal-to-ligand charge transfer (MLCT) transitions in the visible region of the spectrum. The [(TL)₂Ru(dpp)]²⁺ systems populate ³MLCT states after visible light excitation, giving rise to emissions in aqueous solution centered at 692, 690, and 698 nm for TL = bpy, phen, and Ph₂phen respectively. The ³MLCT states and emissions are quenched by O₂, producing a reactive oxygen species. These complexes photocleave DNA with varying efficiencies, [(Ph₂phen)₂Ru(dpp)]²⁺ > [(phen)₂Ru(dpp)]²⁺ > [(bpy)₂Ru(dpp)]²⁺. The presence of the polyazine bridging ligand will allow these chromophores to be incorporated into larger supramolecular assemblies.     

N,N′-Ethylene-bis(3-methoxysalicylideneimine) mononuclear (4f) and heterodinuclear (3d–4f) metal complexes: Synthesis, crystal structure and luminescent properties

The stepwise synthesis of mononuclear (4f) and heterodinuclear (3d–4f) Salen-like complexes has been investigated through structural determination of the intermediate and final products occurring in the process. In the first step, reactions of ligand H₂L and Ln(NO₃)₃ · 6H₂O give rise to three mononuclear lanthanide complexes Ln(H₂L)(NO₃)₃ [H₂L = N,N′-ethylene-bis(3-methoxysalicylideneimine), Ln = Nd (1), Eu (2) and Tb (3)], in which N,N′-ethylene-bis(3-methoxysalicylideneimine) acts as tetradentate ligands with the O₂O₂ set of donor atoms capable of effective coordination. These species are fairly stable and have been isolated. Then, addition of Cu(Ac)₂ · H₂O to the mononuclear lanthanide complex yields expected heterodinuclear (3d–4f) complexes Cu(L)Ln(NO₃)₃ · H₂O [Ln = Nd (4) and Eu (5)] where the Cu(II) ion is inserted to the inner N₂O₂ cavity. Luminescent analysis reveals that complex 3 exhibits characteristic metal-centered fluorescence of Tb(III) ion. However, the characteristic luminescence of both Sm(III) and Eu(III) ions is not observed both in solution and solid state of the complexes.