High-throughput RNA extraction from plant samples based on homogenisation by reciprocal shaking in the presence of a mixture of sand and glass beads

We describe here a reliable high-throughput method for extraction of RNA from fresh or frozen plant tissue that obviates laborious and time-consuming homogenisation by mortar and pestle. The method is based on homogenisation by high-speed reciprocal shaking in presence of a mixture of inexpensive abrasive materials; i.e., quartz sand and glass beads. After homogenisation, the method follows a standard procedure for RNA extraction by phenol/LiCl. Yield and quality of RNA obtained by homogenisation with the sand/glass bead mix are identical to those obtained by mortar and pestle.     

Development of new Malt1 inhibitors and probes

Mucosa-associated lymphoid tissue lymphoma translocation protein 1 (Malt1) is a promising therapeutic target for the treatment of activated B cell-like diffuse large B cell lymphoma (ABC-DLBCL). Several research groups have reported on the development of Malt1 inhibitors and activity-based probes for in vitro and in situ monitoring and modulating Malt1 activity. In this paper, we report on two activity-based Malt1 probes (6 and 7) and a focused library of 19 new Malt1 inhibitors. Our peptide-based probe 6 labels Malt1 in an activity-based manner. In contrast, probe 7, derived from the known covalent inhibitor MI-2, labels both wild type and catalytically inactive Cys to Ala mutant Malt1, suggesting that MI-2 inhibits Malt1 by reacting with a nucleophilic residue other than the active site cysteine. Furthermore, two of our inhibitors (9, apparent IC₅₀ 3.0 μM, and 13, apparent IC₅₀ 2.1 μM) show good inhibitory activity against Malt1 and outperform MI-2 (apparent IC₅₀ 7.8 μM) in our competitive activity-based protein profiling assay.     

Extraction and labeling methods for microarrays using small amounts of plant tissue

Procedures were developed to maximize the yield of high-quality RNA from small amounts of plant biomass for microarrays. Two disruption techniques (bead milling and pestle and mortar) were compared for the yield and the quality of RNA extracted from 1-week-old Arabidopsis thaliana seedlings (approximately 0.5–30 mg total biomass). The pestle and mortar method of extraction showed enhanced RNA quality at the smaller biomass samples compared with the bead milling technique, although the quality in the bead milling could be improved with additional cooling steps. The RNA extracted from the pestle and mortar technique was further tested to determine if the small quantity of RNA (500 ng–7 μg) was appropriate for microarray analyses. A new method of low-quantity RNA labeling for microarrays (NuGEN Technologies, Inc.) was used on five 7-day-old seedlings (approximately 2.5 mg fresh weight total) of Arabidopsis that were grown in the dark and exposed to 1 h of red light or continued dark. Microarray analyses were performed on a small plant sample (five seedlings; approximately 2.5 mg) using these methods and compared with extractions performed with larger biomass samples (approximately 500 roots). Many well-known light-regulated genes between the small plant samples and the larger biomass samples overlapped in expression changes, and the relative expression levels of selected genes were confirmed with quantitative real-time polymerase chain reaction, suggesting that these methods can be used for plant experiments where the biomass is extremely limited (i.e. spaceflight studies).     

Concerning the Preparation of Chloroplasts Active in Hill and Photosynthetic Phosphorylation Activities from Leaves of Phaseolus vulgaris

When bean plants are cultivated under certain conditions, liberation of cell contents by grinding with mortar and pestle yields chloroplasts of low Hill and photosynthetic phosphorylation activities, while grinding in a high speed blendor yields active chloroplasts. The inactivity of plastids obtained with mortar and pestle is due to the presence of an inactivator in the homogenate. The culture conditions that determine whether bean leaves ground with mortar and pestle contain inactivator were not determined.     

Proteomics meets microbiology: technical advances in the global mapping of protein expression and function

The availability of complete genome sequences for a large number of pathogenic organisms has opened the door for large-scale proteomic studies to dissect both protein expression/regulation and function. This review highlights key proteomic methods including two-dimensional gel electrophoresis, reference mapping, protein expression profiling and recent advances in gel-free separation techniques that have made a significant impact on the resolution of complex proteomes. In addition, we highlight recent developments in the field of chemical proteomics, a branch of proteomics aimed at functionally profiling a proteome. These techniques include the development of activity-based probes and activity-based protein profiling methods as well as the use of synthetic small molecule libraries to screen for pharmacological tools to perturb basic biological processes. This review will focus on the applications of these technologies to the field of microbiology.     

Acoustic technology for high-performance disruption and extraction of plant proteins

Acoustic technology shows the capability of protein pellet homogenization from different tissue samples of soybean and rice in a manner comparable to the ordinary mortar/pestle method and far better than the vortex/ultrasonic method with respect to the resolution of the protein pattern through two-dimensional polyacrylamide gel electrophoresis (2D-PAGE). With acoustic technology, noncontact tissue disruption and protein pellet homogenization can be carried out in a computer-controlled manner, which ultimately increases the efficiency of the process for a large number of samples. A lysis buffer termed the T-buffer containing TBP, thiourea, and CHAPS yields an excellent result for the 2D-PAGE separation of soybean plasma membrane proteins followed by the 2D-PAGE separation of crude protein of soybean and rice tissues. For this technology, the T-buffer is preferred because protein quantification is possible by eliminating the interfering compound 2-mercaptoethanol and because of the high reproducibility of 2D-PAGE separation.     

针对泛素化与去泛素化酶的化学探针

蛋白质泛素化对真核细胞内几乎所有生理过程都具备调控作用。新的泛素化与去泛素化酶的发现、功能机制研究及相关化学分子干预是该领域的重要科学命题。针对泛素化与去泛素化酶的化学探针开发促进了人们对于蛋白质泛素化的形成、募集、信号传导及脱除过程中所涉及生化事件的理解。本文总结了近年来针对泛素化与去泛素化酶化学探针的发展，归纳了不同类型探针的化学结构及合成方法，并讨论了它们的各类应用，包括筛查泛素依赖的信号传导系统、监控泛素相关酶活性、辅助泛素相关的识别和催化过程的分子机制解析等。     

Transformation of maize embryogenic calli mediated by ultrasonication and regeneration of fertile transgenic plants

An insecticidal protein gene isolated fromBacillus thuringiensis was transferred into maize by using ultrasonication. The fertile transgenic plants and their progeny were obtained. The Southern hybridization results indicated that the foreign gene had integrated into the maize genome. It has been found that the acoustic intensity and the duration of treatment are the important parameters influencing transformation efficiency by ultrasonication. The maximum relative transformation frequency of 34.1 % was achieved after 30 min of sonication at 0. 5 W/cm² acoustic intensity. With appropriate parameters the ultrasonication can make a number of micropores formed on the cell surface and minimize the treatment damage to the foreign DNA molecules, thus facilitating the DNA molecules to enter the cells. Project supported by “863” State High Technology Development Program.     

On‐target ultrasonic digestion of proteins

In the present work, we report a novel on‐target protein cleavage method. The method utilizes ultrasonic energy and allows up to 20 samples to be cleaved in 5 min for protein identification and one sample in 30 s for on‐tissue digestion. The standard proteins were spotted on a conductive glass slide in a volume of 0.5 μL followed by 5 min of ultrasonication after trypsin addition. Controls (5 min, 37°C no ultrasonication) were also assayed. After trypsin addition, digestion of the tissues was enhanced by 30 s of ultrasonication. The samples were analyzed and compared to those obtained by using conventional 3 h heating proteolysis. The low sample volume needed for the digestion and reduction in sample‐handling steps and time are the features that make this method appealing to the many laboratories working with high‐throughput sample treatment.     

A New Class of Rhomboid Protease Inhibitors Discovered by Activity-Based Fluorescence Polarization

Rhomboids are intramembrane serine proteases that play diverse biological roles, including some that are of potential therapeutical relevance. Up to date, rhomboid inhibitor assays are based on protein substrate cleavage. Although rhomboids have an overlapping substrate specificity, substrates cannot be used universally. To overcome the need for substrates, we developed a screening assay using fluorescence polarization activity-based protein profiling (FluoPol ABPP) that is compatible with membrane proteases. With FluoPol ABPP, we identified new inhibitors for the E. coli rhomboid GlpG. Among these was a structural class that has not yet been reported as rhomboid inhibitors: β-lactones. They form covalent and irreversible complexes with the active site serine of GlpG. The presence of alkyne handles on the β-lactones also allowed activity-based labeling. Overall, these molecules represent a new scaffold for future inhibitor and activity-based probe development, whereas the assay will allow inhibitor screening of ill-characterized membrane proteases.     

An assessment of the efficiency of fungal DNA extraction methods for maximizing the detection of medically important fungi using PCR

To date, no single reported DNA extraction method is suitable for the efficient extraction of DNA from all fungal species. The efficiency of extraction is of particular importance in PCR-based medical diagnostic applications where the quantity of fungus in a tissue biopsy may be limited. We subjected 16 medically relevant fungi to physical, chemical and enzymatic cell wall disruption methods which constitutes the first step in extracting DNA. Examination by light microscopy showed that grinding with mortar and pestle was the most efficient means of disrupting the rigid fungal cell walls of hyphae and conidia. We then trialled several published DNA isolation protocols to ascertain the most efficient method of extraction. Optimal extraction was achieved by incorporating a lyticase and proteinase K enzymatic digestion step and adapting a DNA extraction procedure from a commercial kit (MO BIO) to generate high yields of high quality DNA from all 16 species. DNA quality was confirmed by the successful PCR amplification of the conserved region of the fungal 18S small-subunit rRNA multicopy gene.     

Metagenomic Profiling of Known and Unknown Microbes with MicrobeGPS

Microbial community profiling identifies and quantifies organisms in metagenomic sequencing data using either reference based or unsupervised approaches. However, current reference based profiling methods only report the presence and abundance of single reference genomes that are available in databases. Since only a small fraction of environmental genomes is represented in genomic databases, these approaches entail the risk of false identifications and often suggest a higher precision than justified by the data. Therefore, we developed MicrobeGPS, a novel metagenomic profiling approach that overcomes these limitations. MicrobeGPS is the first method that identifies microbiota in the sample and estimates their genomic distances to known reference genomes. With this strategy, MicrobeGPS identifies organisms down to the strain level and highlights possibly inaccurate identifications when the correct reference genome is missing. We demonstrate on three metagenomic datasets with different origin that our approach successfully avoids misleading interpretation of results and additionally provides more accurate results than current profiling methods. Our results indicate that MicrobeGPS can enable reference based taxonomic profiling of complex and less characterized microbial communities. MicrobeGPS is open source and available from https://sourceforge.net/projects/microbegps/ as source code and binary distribution for Windows and Linux operating systems.     

Assessment of HER-2 gene overexpression in Isfahan province breast cancer patients using Real Time RT-PCR and immunohistochemistry

Purpose

Overexpression of proto-oncogene HER-2 is one of the main molecular markers of breast cancer involved in prognosis and diagnosis and also in trastuzumab therapy. Thus, a request for the evaluation of HER-2 status in breast cancer has been increasing. The aim of our study was assessment of HER-2 overexpression in malignant and benign breast cancer specimens by Real Time RT-PCR technique and comparison of its results with IHC outcomes.

Methods

Twenty benign and sixty malignant breast cancers in addition to fifteen normal breast tissue specimens were analyzed by Real Time RT-PCR method. Fresh tissue samples were disrupted by mortar and pestle. A syringe and a needle were used for complete homogenization of the tissues. The RNA was then isolated from the samples and converted to cDNA. A standard curve was initially plotted using BioEasy SYBR Green I and then all 95 specimens were studied by Real Time RT-PCR using 2^− ΔΔCt method.

Results

23.3% of 60 malignant specimens showed HER-2 overexpression, while all of the benign samples represented the normal expression level of HER-2 gene. The concordance rate between the results of Real Time RT-PCR and IHC was 86.6%.

Conclusion

Real Time RT-PCR method is an almost reliable technique and at least can be used as a complementary method for confirming IHC results. This is emanated from relatively high rate of concordance between outcomes of IHC test, as a routine method of detecting the HER-2 gene expression status, and Real Time RT-PCR technique.     

Chemical strategies for functional proteomics

With complete genome sequences now available for several prokaryotic and eukaryotic organisms, biological researchers are charged with the task of assigning molecular and cellular functions to thousands of predicted gene products. To address this problem, the field of proteomics seeks to develop and apply methods for the global analysis of protein expression and protein function. Here we review a promising new class of proteomic strategies that utilizes synthetic chemistry to create tools and assays for the characterization of protein samples of high complexity. These approaches include the development of chemical affinity tags to measure the relative expression level and post-translational modification state of proteins in cell and tissue proteomes. Additionally, we discuss the emerging field of activity-based protein profiling, which aims to synthesize and apply small molecule probes that monitor dynamics in protein function in complex proteomes.     

Proteome analysis of <Emphasis Type="Italic">Aspergillus ochraceus</Emphasis>

Genome sequencing for many important fungi has begun during recent years; however, there is still some deficiency in proteome profiling of aspergilli. To obtain a comprehensive overview of proteins and their expression, a proteomic approach based on 2D gel electrophoresis and MALDI-TOF/TOF mass spectrometry was used to investigate A. ochraceus. The cell walls of fungi are exceptionally resistant to destruction, therefore two lysis protocols were tested: (1) lysis via manual grinding using liquid nitrogen, and (2) mechanical lysis via rapid agitation with glass beads using MagNalyser. Mechanical grinding with mortar and pestle using liquid nitrogen was found to be a more efficient extraction method for our purpose, resulting in extracts with higher protein content and a clear band pattern in SDS-PAGE. Two-dimensional electrophoresis gave a complex spot pattern comprising proteins of a broad range of isoelectric points and molecular masses. The most abundant spots were subjected to mass spectrometric analysis. We could identify 31 spots representing 26 proteins, most of them involved in metabolic processes and response to stress. Seventeen spots were identified by de novo sequencing due to a lack of DNA and protein database sequences of A. ochraceus. The proteins identified in our study have been reported for the first time in A. ochraceus and this represents the first proteomic approach with identification of major proteins, when the fungus was grown under submerged culture.     

Using peptidyl aldehydes in activity-based proteomics

The broad inhibitory spectrum of aldehydes and the possibility that amino acid residues modulate their specificity point to the potential of using peptidyl aldehydes as activity-based probes. Here, we establish the potential of peptidyl aldehydes in activity-based proteomics by synthesizing different probes and using them to specifically label a well-known serine protease in an activity-dependent manner. From our results, peptidyl aldehydes emerge as promising activity-based probes that enable multiple enzymatic-class detection by substrate recognition and can be used in diverse activity-based proteomics applications like protein identification and activity profiling.     

Activity-based protein profiling of host-virus interactions

Virologists have benefited from large-scale profiling methods to discover new host-virus interactions and to learn about the mechanisms of pathogenesis. One such technique, referred to as activity-based protein profiling (ABPP), uses active site-directed probes to monitor the functional state of enzymes, taking into account post-translational interactions and modifications. ABPP gives insight into the catalytic activity of enzyme families that does not necessarily correlate with protein abundance. ABPP has been used to investigate several viruses and their interactions with their hosts. Differential enzymatic activity induced by viruses has been monitored using ABPP. In this review, we present recent advances and trends involving the use of ABPP methods in understanding host-virus interactions and in identifying novel targets for diagnostic and therapeutic applications.     

Design and synthesis of a novel photoaffinity probe for labelling EGF receptor tyrosine kinases

The epidermal growth factor receptor (EGFR) and HER2 are two important tyrosine kinases that play crucial roles in signal transduction pathways that regulate numerous cellular functions including proliferation, differentiation, migration, and angiogenesis. In the past 20?years, many proteomic methods have emerged as powerful methods to evaluate proteins in biological processes and human disease states. Among them, activity-based protein profiling (ABPP) is one useful approach for the functional analysis of proteins. In this study, a novel photoaffinity probe 11 was designed and synthesised to assess the target profiling of the reactive group in the photoaffinity probe 11. Biological evaluation was performed, and the results showed that the novel photoaffinity probe binds to EGFR and HER2 proteins and it hits targets by the reactive group.     

Tagging and detection strategies for activity-based proteomics

The field of activity-based proteomics is a relatively new discipline that makes use of small molecules, termed activity-based probes (ABPs), to tag and monitor distinct sets of proteins within a complex proteome. These activity-dependant labels facilitate analysis of systems-wide changes at the level of enzyme activity rather than simple protein abundance. While the use of small molecule inhibitors to label enzyme targets is not a new concept, the past ten years have seen a rapid expansion in the diversity of probe families that have been developed. In addition to increasing the number and types of enzymes that can be targeted by this method, there has also been an increase in the number of methods used to visualize probes once they are bound to target enzymes. In particular, the use of small organic fluorophores has created a wealth of applications for ABPs that range from biochemical profiling of diverse proteomes to direct imaging of active enzymes in live cells and even whole animals. In addition, the advent of new bioorthogonal coupling chemistries now enables a diverse array of tags to be added after targets are labeled with an ABP. This strategy has opened the door to new in vivo applications for activity-based proteomic methods.