Purification and characterization of the tetrachloroethene reductive dehalogenase of strain PCE-S

The membrane-associated tetrachloroethene reductive dehalogenase from the tetrachloroethene-reducing anaerobe, strain PCE-S, was purified 165-fold to apparent homogeneity in the presence of the detergent Triton X-100. The purified dehalogenase catalyzed the reductive dechlorination of tetrachloroethene to trichloroethene and of trichloroethene to cis-1,2-dichloroethene with reduced methyl viologen as the electron donor, showing a specific activity of 650 nkat/mg protein. The apparent K _m values of the enzyme for tetrachloroethene, trichloroethene, and methyl viologen were 10 μM, 4 μM, and 0.3 mM, respectively. SDS-PAGE revealed a single protein band with an apparent molecular mass of 65 kDa. The apparent molecular mass of the native enzyme was 200 kDa as determined by gel filtration. Tetrachloroethene dehalogenase contained 0.7 ± 0.3 mol corrinoid, 1.0 ± 0.3 mol cobalt, 7.8 ± 0.5 mol iron, and 10.3 ± 2.0 mol acid-labile sulfur per mol subunit. The pH optimum was approximately 7.2, and the temperature optimum was approximately 50 °C. The dehalogenase was oxygen-sensitive with a half-life of approximately 50 min. The N-terminal amino acid sequence of the enzyme was determined, and no significant similarity was found to any part of the amino acid sequence of the tetrachloroethene (PCE) reductive dehalogenase from Dehalospirillum multivorans. Received: 4 December 1997 / Accepted: 10 February 1998     

Rotihibin A,a Novel Plant Growth Regulator,from Streptomyces sp.

A thermophilic Thermoactinomyces sp. E79 producing a highly thermostable alkaline protease was isolated from soil. The protease, produced extracellularly by Thermoactinomyces sp. E79, was purified by DEAE-Sepharose CL-6B and Butyl-Toyopearl 650M column chromatography. The relative molecular mass was estimated to be 31,000 by SDS–polyacrylamide gel electrophoresis. Enzyme activity was inhibited by phenylmethylsulfonyl fluoride, suggesting the enzyme to be a serine protease. The optimum temperature for the enzyme activity was 85°C, and about 50% of the original activity remained after incubation at 90°C for 10 min in the presence of Ca^{2 +} . The optimum pH for the enzyme activity was 11.0 and the enzyme was fairly stable from pH 5.0 to 12.0. The gene for this thermostable alkaline protease was cloned in Escherichia coli and the expressed intracellular enzyme was activated by heat treatment. Sequence analysis showed an open reading frame of 1,152 base pairs, coding for a poiypeptide of 384 amino acids. The polypeptide was composed of a signal sequence (25 amino acids), a prosequence (81 amino acids), and a mature protein of 278 amino acids. The deduced amino acid sequence of the mature protease had high similarity with thermitase, a serine protease from Thermoactinomyces vulgaris, and the extent of sequence identity was 76%.     

Purification and characterization of goose type lysozyme from cassowary (Casuarius casuarius) egg white

A novel goose-type lysozyme was purified from egg white of cassowary bird (Casuarius casuarius). The purification step was composed of two fractionation steps: pH treatment steps followed by a cation exchange column chromatography. The molecular mass of the purified enzyme was estimated to be 20.8 kDa by SDS-PAGE. This enzyme was composed of 186 amino acid residues and showed similar amino acid composition to reported goose-type lysozymes. The N-terminal amino acid sequencing from transblotted protein found that this protein had no N-terminal. This enzyme showed either lytic or chitinase activities and had some different properties from those reported for goose lysozyme. The optimum pH and temperature on lytic activity of this lysozyme were pH 5 and 30 degrees C at ionic strength of 0.1, respectively. This lysozyme was stable up to 30 degrees C for lytic activity and the activity was completely abolished at 80 degrees C. The chitinase activity against glycol chitin showed dual optimum pH around 4.5 and 11. The optimum temperature for chitinase activity was at 50 degrees C and the enzyme was stable up to 40 degrees C.     

Purification and characterization of secreted acid phosphatase under phosphate-deficient condition inPholiota nameko

Activity of acid phosphatase secreted by mycelia ofPholiota nameko on cultivation for 30d in Pi-depleted medium was 88-fold higher than the corresponding activity in the Pi-supplied medium. One isozyme of the secreted acid phosphatases was purified from the culture filtrate of Pi-depleted medium by ammonium sulfate fractionation and cation exchange chromatography. The purified enzyme was homogeneous on electrophoresis. Gel filtration analysis showed change chromatography. The purified enzyme was homogeneous on electrophoresis. Gel filtration analysis showed that the native molecule had a molecular weight of 117,000. The molecular weight on gel electrophoresis with SDS was 52,000, indicating that the native form of the enzyme was a homodimer. The optimum pH and temperature of the enzyme were, 5.5 and 45°C, respectively, and the isoelectric point of the enzyme was pH 6.9. Adsorption on Con A-Sepharose and periodic-Schiff stain suggested that the enzyme is a glycoprotein. The enzyme hydrolyzed a wide variety of phosphate esters, nucleoside phosphates, sugar phosphates, and phosphorylated amino acids. Cu²⁺, Fe²⁺, Hg²⁺, iodoacetate, molybdate, tartaric acid, and SDS inhibited the enzyme activity. Fe³⁺ (1 mM), Triton X-100, methanol, and ethanol activated it. Fifteen residues of the N-terminal amino acid sequence were determined.     

Cloning, sequencing and overexpression of a Rhodothermus marinus gene encoding a thermostable cellulase of glycosyl hydrolase family 12

A gene library from the thermophilic eubacterium Rhodothermus marinus, strain ITI 378, was constructed in pUC18 and transformed into Escherichia coli. Of 5400 transformants, 3 were active on carboxymethylcellulose. Three plasmids conferring cellulase activity were purified and were all found to contain the same cellulase gene, celA. The open reading frame for the celA gene is 780 base pairs and encodes a protein of 260 amino acids with a calculated molecular mass of 28.8 kDa. The amino acid sequence shows homology with cellulases in glycosyl hydrolase family 12. The celA gene was overexpressed in E. coli when the pET23, T7 phage RNA polymerase system was used. The enzyme showed activity on carboxymethylcellulose and lichenan, but not on birch xylan or laminarin. The expressed enzyme had six terminal histidine residues and was purified by using a nickel nitrilotriacetate column. The enzyme had a pH optimum of 6–7 and its highest measured initial activity at 100 °C. The heat stability of the enzyme was increased by removal of the histidine residues. It then retained 75% of its activity after 8 h at 90 °C. Received: 5 August 1997 / Received revision: 6 November 1997 / Accepted: 7 November 1997     

Biochemical and phylogenetic characterization of isocitrate dehydrogenase from a hyperthermophilic archaeon, Archaeoglobus fulgidus

A thermostable homodimeric isocitrate dehydrogenase from the hyperthermophilic sulfate-reducing archaeon Archaeoglobus fulgidus was purified and characterized. The mol. mass of the isocitrate dehydrogenase subunit was 42 kDa as determined by SDS-PAGE. Following separation by SDS-PAGE, A. fulgidus isocitrate dehydrogenase could be renatured and detected in situ by activity staining. The enzyme showed dual coenzyme specificity with a high preference for NADP⁺. Optimal temperature for activity was 90° C or above, and a half-life of 22 min was found for the enzyme when incubated at 90° C in a 50 mM Tricine-KOH buffer (pH 8.0). Based on the N-terminal amino acid sequence, the gene encoding the isocitrate dehydrogenase was cloned. DNA sequencing identified the icd gene as an open reading frame encoding a protein of 412 amino acids with a molecular mass corresponding to that determined for the purified enzyme. The deduced amino acid sequence closely resembled that of the isocitrate dehydrogenase from the archaeon Caldococcus noboribetus (59% identity) and bacterial isocitrate dehydrogenases, with 57% identity with isocitrate dehydrogenase from Escherichia coli. All the amino acid residues directly contacting substrate and coenzyme (except Ile-320) in E. coli isocitrate dehydrogenase are conserved in the enzyme from A. fulgidus. The primary structure of A. fulgidus isocitrate dehydrogenase confirmes the presence of Bacteria-type isocitrate dehydrogenases among Archaea. Multiple alignment of all the available amino acid sequences of di- and multimeric isocitrate dehydrogenases from the three domains of life shows that they can be divided into three distinct phylogenetic groups. Received: 6 February 1997 / Accepted: 12 June 1997     

Purification of a novel extracellular laccase from solid-state culture of the edible mushroom <Emphasis Type="Italic">Lentinula edodes</Emphasis>

The laccases (EC 1.10.3.2) secreted into solid-state culture by Lentinula edodes were analyzed. The fungus secreted at least two laccases in the solid-state culture. One laccase was purified to a homogeneous preparation using anion-exchange, hydrophobic, and size-exclusion chromatography. SDS-PAGE analysis showed that the purified laccase, Lcc6, was a monomeric protein of 58.5 kDa. The optimum pH for enzyme activity was about 3.5, and the laccase was most active at 40°C. The N-terminal amino acid sequence of Lcc6 did not correspond to the sequence of Lcc1, which was previously purified from L. edodes. Lcc6 had decolorization activity to some chemical dyes.     

Oxidation of Methanol by the Yeast Pichia pastoris. Purification and Properties of the Formate Dehydrogenase

The formate dehydrogenase from the yeast Pichia pastoris IFP 206 was purified to homogeneity. The protein showed a molecular weight of 68,000 daltons and was composed of two identical subunits. Its amino acid composition was similar to those of other formate dehydrogenases and was characterized by a high content of acidic residues. The N-terminal end of the molecule was probably blocked.

The enzyme activity was NAD⁺ dependent (NADP⁺ could not replace NAD⁺). Its optimum temperature was 47°C and the activation energy 10.8 kcal/mol. The enzyme was active from pH 3.5 to 10.5 with a maximum at pH 7.5. The Michaelis constant for NAD+ and formate were respectively 0.27 and 15mM. The purified enzyme had no S-formylglutathione hydrolase activity, strongly suggesting that the true substrate was formate. NADH, cyanide and azide were strong inhibitors of the enzyme.     

Characterisitics and Gene Cloning of Phospholipase D of the Psychrophile,Shewanella sp.

Phospholipase D, with a molecular mass of 64 kDa, was purified from the psychrophile, Shewanella sp. The enzyme showed maximal activity at pH 7.8 and 40 °C in the presence of the Ca²⁺-ion, and its activity at 10 °C was 6.5% of maximum. The enzyme exhibited high activity to the non-micelle form of phosphatidylcholine in an aqueous solution containing water miscible alcohols such as methanol, ethanol, iso-propanol, and n-propanol. Nucleotide sequencing of the enzyme gene yielded a deduced amino acid sequence, which showed 36.2% identity to that of Streptomyces chromofuscus phopsholipase D alone. The low sequence similarity to other phopsholipase D enzymes suggests that the purified enzyme might be a novel phospholipase D.     

Thermostable alkaline cellulase from an alkaliphilic isolate, Bacillus sp. KSM-S237

Thermostable alkaline cellulase (endo-1,4-β-glucanase, EC 3.2.1.4) activity was detected in the culture medium of a strictly alkaliphilic strain of Bacillus, designated KSM-S237. This novel enzyme was purified to homogeneity by a two-step column-chromatographic procedure with high yield. The N-terminal amino acid sequence of the purified enzyme was Glu-Gly-Asn-Thr-Arg-Glu-Asp-Asn-Phe-Lys-His-Leu-Leu-Gly-Asn-Asp-Asn-Val-Lys-Arg. The enzyme had a molecular mass of approximately 86 kDa and an isoelectric point of pH 3.8. The enzyme had a pH optimum of 8.6–9.0 and displayed maximum activity at 45°C. The alkaline enzyme was stable up to 50°C and more than 30% of the original activity was detectable after heating at 100°C and at pH 9.0 for 10 min. The enzyme hydrolyzed carboxymethylcellulose, lichenan (β-1,3;1,4-linkage), and p-nitrophenyl derivatives of cellotriose and cellotetraose. Crystalline forms of cellulose (Avicel and filter paper), H₃PO₄-swollen cellulose, NaOH-swollen cellulose, curdlan (β-1,3-linkage), laminarin (β-1,3;1,6-linkage), and xylan were barely hydrolyzed at all. Received: April 28, 1997 / Accepted: May 24, 1997     

Purification and partial characterization of β-1,3-glucanase from <Emphasis Type="Italic">Chaetomium thermophilum</Emphasis>

A thermostable extracellular β-1,3-glucanase from Chaetomium thermophilum was purified to homogeneity by fractional ammonium sulfate precipitation, Pheny1-Sepharose hydrophobic interaction chromatography, ion exchange chromatography on DEAE-Sepharose and gel filtration on Sephacryl S-100. SDS-PAGE of the purified enzyme showed a single protein band of molecular weight 76.3 kDa. The enzyme exhibited optimum catalytic activity at pH 6.0 and 60 °C. It was thermostable at 50 °C, and retained 90% activity after 60 min at 60 °C. The half-life at 65 °C, 70 °C and 80 °C was 55 min, 21.5 min, and 5 min, respectively. The N-terminal amino acid sequence (8 residues) of the enzyme was HWLGDIPH. The HPLC analysis showed that the only enzymatic product formed from laminarin by the purified β-1,3-glucanase was glucose, indicating that the enzyme is an exo-β-1,3-glucanase (EC 3.2.1.58).     

Purification, characterization, and molecular cloning of organic-solvent-tolerant cholesterol esterase from cyclohexane-tolerant Burkholderia cepacia strain ST-200

Extracellular cholesterol esterase of Burkholderia cepacia strain ST-200 was purified from the culture supernatant. Its molecular mass was 37 kDa. The enzyme was stable at pH 5.5–12 and active at pH 5.5–6, showing optimal activity at pH 7.0 at 45°C. Relative to the commercially available cholesterol esterases, the purified enzyme was highly stable in the presence of various water-miscible organic solvents. The enzyme preferentially hydrolyzed long-chain fatty acid esters of cholesterol, except for that of cholesteryl palmitate. The enzyme exhibited lipolytic activity toward various p-nitrophenyl esters. The hydrolysis rate of p-nitrophenyl caprylate was enhanced 3.5- to 7.2-fold in the presence of 5–20% (vol/vol) water-miscible organic solvents relative to that in the absence of organic solvents. The structural gene encoding the cholesterol esterase was cloned and sequenced. The primary translation product was predicted to be 365 amino acid residues. The mature product is composed of 325 amino acid residues. The amino acid sequence of the product showed the highest similarity to the lipase LipA (87%) from B. cepacia DSM3959.     

Cloning,expression, and characterization of thermostable Manganese superoxide dismutase from <Emphasis Type="Italic">Thermoascus aurantiacus</Emphasis> var. <Emphasis Type="Italic">levisporus</Emphasis>

A superoxide dismutase (SOD) gene of Thermoascus aurantiacus var. levisporus, a thermophilic fungus, was cloned, sequenced, and expressed in Pichia pastoris and its gene product was characterized. The coding sequence predicted a 231 residues protein with a unique 35 amino acids extension at the N-terminus indicating a mitochondrial-targeting sequence. The content of Mn was 2.46 μg/mg of protein and Fe was not detected in the purified enzyme. The enzyme was found to be inhibited by NaN₃, but not by KCN or H₂O₂. These results suggested that the SOD in Thermoascus aurantiacus var. levisporus was the manganese superoxide dismutase type. In comparison with other MnSODs, all manganese-binding sites were also conserved in the sequence (H88, H136, D222, H226). The molecular mass of a single band of the enzyme was estimated to be 21.7 kDa. The protein was expressed in tetramer form with molecular weight of 68.0 kDa. The activity of purified protein was 2,324 U/mg. The optimum temperature of the enzyme was 55°C and it exhibited maximal activity at pH 7.5. The enzyme was thermostable at 50 and 60°C and the half-life at 80°C was approximately 40 min.     

A membrane-bound metallo-endopeptidase from rat kidney hydrolyzing parathyroid hormone. Purification and characterization

A metallo-endopeptidase, which appears to be an integral membrane protein of rat kidney, was purified to homogeneity by a series of standard chromatographic procedures. This enzyme significantly hydrolyzed human parathyroid hormone [hPTH(1-84)] and a synthetic substrate Suc-Leu-Leu-Val-Tyr-Mec (Suc = succinyl, Mec = 4-methyl-coumarinyl-7-amide). The purified enzyme had apparent molecular masses of 250 kDa on gel filtration, and 88 kDa and 245 kDa on sodium dodecyl sulfate/polyacrylamide gel electrophoresis under reducing and non-reducing conditions, respectively. Its pH optimum for activity was 8.0-8.5 and its isoelectric point was pH 4.9. Its activity was inhibited by EDTA, EGTA and o-phenanthroline, but not by phosphoramidon. The metal-depleted enzyme was reactivated by the addition of metal ions. The enzyme was also inhibited by chymostatin and eglin C, and by thiol compounds. Of the synthetic substrates examined, the enzyme hydrolyzed only Suc-Leu-Leu-Val-Tyr-Mec, one of the synthetic substrates for alpha-chymotrypsin. It did not hydrolyze synthetic substrates with less than four amino acid residues with tyrosine in the P1 position. The enzyme hydrolyzed hPTH and reduced hen egg lysozyme but did not hydrolyze azocasein or [3H]methyl-casein. NH2-terminal amino acid sequence analyses of the degradation products of hPTH(1-84) and reduced hen egg lysozyme by the purified enzyme revealed that the enzyme preferentially cleaved these peptides at peptide bonds flanked by hydrophilic amino acid residues. Amino acid analyses showed that the main degradation products of PTH were hPTH(17-29), hPTH(30-38) and hPTH(74-84). The ability of the enzyme to hydrolyze peptide bonds flanked by hydrophilic amino acid residues and its inability to degrade azocasein distinguish it from several other kidney endopeptidases reported, such as endopeptidase 24.11 and meprin.     

Cloning, gene expression and characterization of a novel bacterial NAD-dependent non-phosphorylating glyceraldehyde-3-phosphate dehydrogenase from Neisseria meningitidis strain Z2491

Alignment of the amino acid sequence of some archaeal, bacterial and eukaryotic non-phosphorylating glyceraldehydes-3-phosphate dehydrogenases (GAPNs) and aldehyde dehydrogenases (ALDHs) with the sequence of a putative GAPN present in the genome of the Gram-negative bacterium Neisseria meningitidis strain Z2491 demonstrated the conservation of residues involved in the catalytic activity. The predicted coding sequence of the N. meningitidis gapN gene was cloned in Escherichia coli XL1-blue under the expression of an inducible promoter. The IPTG-induced GAPN was purified ca. 48-fold from E. coli cells using a procedure that sequentially employed conventional ammonium sulfate fractionation as well as anion-exchange and affinity chromatography. The purified recombinant enzyme was thoroughly characterized. The protein is a homotetramer with a 50-kDa subunit, exhibiting absolute specificity for NAD and a broad spectrum of aldehyde substrates. Isoelectric focusing analysis with the purified fraction showed the presence of an acidic polypeptide with an isoelectric point of 6.3. The optimum pH of the purified enzyme was between 9 and 10. Studies on the effect of increasing temperatures on the enzyme activity revealed an optimal value ca. 64 °C. Molecular phylogenetic data suggest that N. meningitidis GAPN has a closer relationship with archaeal GAPNs and glyceraldehyde dehydrogenases than with the typical NADP-specific GAPNs from Gram-positive bacteria and photosynthetic eukaryotes.     

PURIFICATION AND CHARACTERIZATION OF MUTANASE PRODUCED BY Paenibacillus curdlanolyticus MP-1

Mutanases are enzymes that catalyze hydrolysis of α-1,3-glucosidic bonds in various α-glucans. One of such glucans, mutan, which is synthesized by cariogenic streptococci, is a major virulence factor for induction of dental caries. This means that mutan-degrading enzymes have potential in caries prophylaxis. In this study, we report the purification, characterization, and partial amino acid sequence of extracellular mutanase produced by the MP-1 strain of Paenibacillus curdlanolyticus, bacterium isolated from soil. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) of the purified enzyme showed a single protein band of molecular mass 134 kD, while native gel filtration chromatography confirmed that the enzyme was a monomer of 142 kD. Mutanase showed a pH optimum in the range from pH 5.5 to 6.5 and a temperature optimum around 40–45°C. It was thermostable up to 45°C, and retained 50% activity after 1 hr at 50°C. The enzyme was fully stable at a pH range of 4 to 10. The enzyme activity was stimulated by the addition of Tween 20, Tween 80, and Ca²⁺, but it was significantly inhibited by Hg²⁺, Ag⁺, and Fe²⁺, and also by p-chloromercuribenzoate, iodoacetamide, and ethylenediamine tetraacetic acid (EDTA). Mutanase preparation preferentially catalyzed the hydrolysis of various streptococcal mutans and fungal α-1,3-glucans. It also showed binding activity to insoluble α-1,3-glucans. The N-terminal amino acid sequence was NH₂-Ala-Gly-Gly-Thr-Asn-Leu-Ala-Leu-Gly-Lys-Asn-Val-Thr-Ala-Ser-Gly-Gln. This sequence indicated an analogy of the enzyme to α-1,3-glucanases from other Paenibacillus and Bacillus species.     

Preparation and some properties of cholesterol oxidase from Rhodococcus sp. R14-2

Rhodococcus sp. R_14-2, isolated from Chinese Jin-hua ham, produces a novel extracellular cholesterol oxidase (COX). The enzyme was extracted from fermentation broth and purified 53.1-fold based on specific activity. The purified enzyme shows a single polypeptide band on SDS-PAGE with an estimated molecular weight of about 60 kDa, and has a pI of 8.5. The first 10 amino acid residues of the NH₂-terminal sequence of the enzyme are A-P-P-V-A-S-C-R-Y-C, which differs from other known COXs. The enzyme is stable over a rather wide pH range of 4.0–10.0. The optimum pH and temperature of the COX are pH 7.0 and 50°C, respectively. The COX rapidly oxidizes 3β-hydroxysteroids such as cholesterol and phytosterols, but is inert toward 3α-hydroxysteroids. Thus, the presence of a 3β-hydroxyl group appears to be essential for substrate activity. The Michaelis constant (Km) for cholesterol is estimated at 55 μM; the COX activity was markedly inhibited by metal ions such as Hg²⁺ and Fe³⁺ and inhibitors such as p-chloromercuric benzoate, mercaptoethanol and fenpropimorph. Inhibition caused by p-chloromercuric benzoate, mercuric chloride, or silver nitrate was almost completely prevented by the addition of glutathione. These suggests that -SH groups may be involved in the catalytic activity of the present COX.     

Heterologous expression and characterization of a malathion-hydrolyzing carboxylesterase from a thermophilic bacterium, Alicyclobacillus tengchongensis

A carboxylesterase gene from thermophilic bacterium, Alicyclobacillus tengchongensis, was cloned and expressed in Escherichia coli BL21 (DE3). The gene coded for a 513 amino acid protein with a calculated molecular mass of 57.82 kDa. The deduced amino acid sequence had structural features highly conserved among serine hydrolases, including Ser204, Glu325, and His415 as a catalytic triad, as well as type-B carboxylesterase serine active site (FGGDPENITIGGQSAG) and type-B carboxylesterase signature 2 (EDCLYLNIWTP). The purified enzyme exhibited optimum activity with β-naphthyl acetate at 60 °C and pH 7 as well as stability at 25 °C and pH 7. One unit of the enzyme hydrolyzed 5 mg malathion l^?1 by 50 % within 25 min and 89 % within 100 min. The enzyme strongly degraded malathion and has a potential use for the detoxification of malathion residues.     

Purification and characterization of extracellular laccase fromPleurotus ostreatus

Laccase (EC 1.10.3.2) from the culture filtrate of a strain of white rot basidiomycetePleurotus ostreatus was purified using DEAE-Toyopearl 650M and butyl-Toyopearl 650M column chromatographies and Superdex 75 HR 10/30 fast protein liquid chromatography. Molecular weight of the purified laccase was about 55,000, and the isoelectric point was 3.0. The optimum pH for enzyme activity was 6.5, and the optimum temperature was 50°C. This enzyme contained 7.4% sugar and two copper atoms per molecule. The substrate specificity was similar to those of other fungal laccases. Comparison of the N-terminal amino acid sequence of theP. ostreatus laccase with those fromPleurotus ostreatus Florida,Coriolus hirsutus, Phlebia radiata, basidiomycete PM1 (CECT 2971),Trametes villosa, Pycnoporus cinnabarinus, Ceriporiopsis subvermispora, andAgaricus bisporus showed 95, 65, 60, 55, 55, 55, 50, and 35% similarity, respectively, in the first 20 residues. No similarity in this region was detected with laccases fromNeurospora crassa, Aspergillus nidulans, andCryptococcus neoformans.     

Molecular Characterization of a Novel Family-46 Chitosanase from Pseudomonas sp. A-01

Pseudomonas sp. A-01, isolated as a strain with chitosan-degrading activity, produced a 28 kDa chitosanase. Following purification of the chitosanase (Cto1) and determination of its N-terminal amino acid sequence, the corresponding gene (cto1) was cloned by a reverse-genetic technique. The gene encoded a protein, composed of 266 amino acids, including a putative signal sequence (1-28), that showed an amino acid sequence similar to known family-46 chitosanases. Cto1 was successfully overproduced and was secreted by a Brevibacillus choshinensis transformant carrying the cto1 gene on expression plasmid vector pNCMO2. The purified recombinant Cto1 protein was stable at pH 5–8 and showed the best chitosan-hydrolyzing activity at pH 5. Replacement of two acidic amino acid residues, Glu23 and Asp41, which correspond to previously identified active centers in Streptomyces sp. N174 chitosanase, with Gln and Asn respectively caused a defect in the hydrolyzing activity of the enzyme.