Targeted gene disruption by homologous recombination in the hyperthermophilic archaeon Thermococcus kodakaraensis KOD1

In contrast to the high accumulation in sequence data for hyperthermophilic archaea, methodology for genetically manipulating these strains is still at an early stage. This study aimed to develop a gene disruption system for the hyperthermophilic euryarchaeon Thermococcus kodakaraensis KOD1. Uracil-auxotrophic mutants with mutations in the orotidine-5'-monophosphate decarboxylase gene (pyrF) were isolated by positive selection using 5-fluoroorotic acid (5-FOA) and used as hosts for further transformation experiments. We then attempted targeted disruption of the trpE locus in the host strain by homologous recombination, as disruption of trpE was expected to result in tryptophan auxotrophy, an easily detectable phenotype. A disruption vector harboring the pyrF marker within trpE was constructed for double-crossover recombination. The host cells were transformed with the exogenous DNA using the CaCl(2) method, and several transformants could be selected based on genetic complementation. Genotypic and phenotypic analyses of a transformant revealed the unique occurrence of targeted disruption, as well as a phenotypic change of auxotrophy from uracil to tryptophan caused by integration of the wild-type pyrF into the host chromosome at trpE. As with the circular plasmid, gene disruption with linear DNA was also possible when the homologous regions were relatively long. Shortening these regions led to predominant recombination between the pyrF marker in the exogenous DNA and the mutated allele on the host chromosome. In contrast, we could not obtain trpE disruptants by insertional inactivation using a vector designed for single-crossover recombination. The gene targeting system developed in this study provides a long-needed tool in the research on hyperthermophilic archaea and will open the way to a systematic, genetic approach for the elucidation of unknown gene function in these organisms.     

Gene transfer in Cryptococcus neoformans by use of biolistic delivery of DNA.

A transformation scheme for Cryptococcus neoformans to yield high-frequency, integrative events was developed. Adenine auxotrophs from a clinical isolate of C. neoformans serotype A were complemented by the cryptococcal phosphoribosylaminoimidazole carboxylase gene (ade2) with a biolistic DNA delivery system. Comparison of two DNA delivery systems (electroporation versus a biolistic system) showed notable differences. The biolistic system did not require linear vectors and transformed each auxotrophic strain at similar frequencies. Examination of randomly selected transformants by biolistics showed that 15 to 40% were stable, depending on the recipient auxotroph, with integrative events identified in all stable transformants by DNA analysis. Although the ade2 cDNA copy transformed at a low frequency, DNA analysis found homologous recombination in each of these transformants. DNA analysis of stable transformants receiving genomic ade2 revealed ectopic integration in a majority of cases, but approximately a quarter of the transformants showed homologous recombination with vector integration or gene replacement. This system has the potential for targeted gene disruption, and its efficiency will also allow for screening of DNA libraries within C. neoformans. Further molecular strategies to study the pathobiology of this pathogenic yeast are now possible with this transformation system.     

Transformation of Dictyostelium discoideum with plasmid DNA

DNA-mediated transformation is one of the most widely used techniques to study gene function. The eukaryote Dictyostelium discoideum is amenable to numerous genetic manipulations that require insertion of foreign DNA into cells. Here we describe two commonly used methods to transform Dictyostelium cells: calcium phosphate precipitation, resulting in high copy number transformants; and electroporation, an effective technique for producing single integration events into genomic DNA. Single integrations are required for gene disruption by homologous recombination. We also discuss how different selection markers affect vector copy number in transformants and explain why blasticidin has become the preferred selectable marker for making gene knockouts. Both procedures can be accomplished in less than 2 h of hands-on time; however, the calcium phosphate precipitation method contains several incubations, including one of at least 4 h, so the total time required for the transformation is approximately 8 h.     

Parameters determining the efficiency of gene targeting in the moss Physcomitrella patens

In the moss Physcomitrella patens, transforming DNA containing homologous sequences integrates predominantly by homologous recombination with its genomic target. A systematic investigation of the parameters that determine gene targeting efficiency shows a direct relationship between homology length and targeting frequency for replacement vectors (a selectable marker flanked by homologous DNA). Overall homology of only 1 kb is sufficient to achieve a 50% yield of targeted transformants. Targeting may occur through homologous recombination in one arm, accompanied by non-homologous end-joining by the other arm of the vector, or by allele replacement following two homologous recombination events. Allele replacement frequency depends on the symmetry of the targeting vector, being proportional to the length of the shorter arm. Allele replacement may involve insertion of multiple copies of the transforming DNA, accompanied by ectopic insertions at non-homologous sites. Single-copy and single insertions at targeted loci (targeted gene replacements, ‘TGR’) occur with a frequency of 7–20% of all transformants when the minimum requirements for allele replacement are met. Homologous recombination in Physcomitrella is substantially more efficient than in any multicellular eukaryote, recommending it as the outstanding model for the study of homologous recombination in plants.     

Targeted disruption of the NIT8 gene in Chlamydomonas reinhardtii.

We have used homologous recombination to disrupt the nuclear gene NIT8 in Chlamydomonas reinhardtii. This is the first report of targeted gene disruption of an endogenous locus in C. reinhardtii and only the second for a photosynthetic eukaryote. NIT8 encodes a protein necessary for nitrate and nitrite assimilation by C. reinhardtii. A disruption vector was constructed by placing the CRY1-1 selectable marker gene, which confers emetine resistance, within the NIT8 coding region. nit8 mutants are unable to grow on nitrate as their sole nitrogen source (Nit-) and are resistant to killing by chlorate. One of 2,000 transformants obtained after selection on emetine-chlorate medium contained a homologous insertion of five copies of the disruption plasmid into the NIT8 gene, producing an emetine-resistant, chlorate-resistant Nit- phenotype. The mutant phenotype was rescued by the wild-type NIT8 gene upon transformation. Seven other mutations at the nit8 locus, presumably resulting from homologous recombination with the disruption plasmid, were identified but were shown to be accompanied by deletions of the surrounding genomic region.     

Sequence length required for homologous recombination in Cryptococcus neoformans

Cryptococcosis is a major threat to immunocompromised individuals. Isolates of Cryptococcus neoformans var. grubii and var. neoformans are responsible for most of the infections in the United States and Europe. In depth analysis of the virulence phenotype of this organism requires the generation of specific gene disruptions. The minimum sequence requirements for efficient homologous recombination has not been determined in Cryptococcus. To investigate the flanking DNA length requirements for efficient homologous recombination in variety grubii, the rates of homologous recombination of constructs with different lengths of flanking sequence at two loci, CAP59 and CNLAC1, were examined. Five gene disruption constructs were prepared for each locus with symmetric lengths of sequence homologous to the target gene with approximately 50, 100, 200, 300 or 400bp flanking the selectable marker for hygromycin resistance. In addition, two asymmetric constructs with 50bp on one side and 400bp on the other side were generated for each locus. Overall, symmetric constructs with 300bp or more of flanking sequence on each side and the asymmetric constructs were efficiently targeted for gene disruption by homologous recombination in C. neoformans var. grubii. With one exception, the rate of recovery of homologous recombinants using the longer or asymmetric constructs as targeting vectors was greater than five percent of total transformants. Symmetrical constructs with 100bp or less of homologous flanking sequence did not efficiently generate targeted gene disruptions because the rate of homologous recombinants was less than or equal to 1%.     

A novel gene cluster in Fusarium graminearum contains a gene that contributes to butenolide synthesis

The development of expressed sequence tag (EST) databases, directed transformation and a sequenced genome has facilitated the functional analysis of Fusarium graminearum genes. Extensive analysis of 10,397 ESTs, derived from thirteen cDNA libraries of F. graminearum grown under diverse conditions, identified a novel cluster of eight genes (gene loci fg08077-fg08084) located within a 17kb region of genomic sequence contig 1.324. The expression of these genes is concomitantly up-regulated under growth conditions that promote mycotoxin production. Gene disruption and add-back experiments followed by metabolite analysis of the transformants indicated that one of the genes, fg08079, is involved in butenolide synthesis. The mycotoxin butenolide is produced by several Fusarium species and has been suggested, but not proven, to be associated with tall fescue toxicoses in grazing cattle. This is the first report of the identification of a gene involved in the biosynthetic pathway of butenolide.     

Agrobacterium-mediated transformation leads to improved gene replacement efficiency in Aspergillus awamori

In this study, the efficiency of gene replacement in Aspergillus awamori between Agrobacterium-mediated transformation and CaCl(2)/PEG-mediated transformation was compared. For the genes, pyrG and gfaA, it was found that the homologous recombination frequencies obtained by Agrobacterium-mediated transformation were 3- to 6-fold higher than the frequencies obtained with CaCl(2)/PEG protoplast transformation. For the pyrG gene, it was found that Agrobacterium-mediated transformation allowed an efficient homologous recombination with shorter DNA flanks than CaCl(2)/PEG protoplast transformation. Finally, the addition of the dominant amdS marker as a second selection marker to the gene replacement cassette led to a further 2-fold enrichment in transformants with gene replacement events, resulting in a gene replacement frequency of 55%. Based on the data it can be concluded that Agrobacterium-mediated transformation is an efficient tool for gene replacement and that the amdS gene can be successfully used as a second selection marker to select transformants with putative gene replacement.     

Extensive homologous recombination between introduced and native regulatory plastid DNA elements in transplastomic plants

Homologous recombination within plastids directs plastid genome transformation for foreign gene expression and study of plastid gene function. Though transgenes are generally efficiently targeted to their desired insertion site, unintended homologous recombination events have been observed during plastid transformation. To understand the nature and abundance of these recombination events, we analyzed transplastomic tobacco lines derived from three different plastid transformation vectors utilizing two different loci for foreign gene insertion. Two unintended recombinant plastid DNA species were formed from each regulatory plastid DNA element included in the transformation vector. Some of these recombinant DNA species accumulated to as much as 10–60% of the amount of the desired integrated transgenic sequence in T0 plants. Some of the recombinant DNA species undergo further, “secondary” recombination events, resulting in an even greater number of recombinant plastid DNA species. The abundance of novel recombinant DNA species was higher in T0 plants than in T1 progeny, indicating that the ancillary recombination events described here may have the greatest impact during selection and regeneration of transformants. A line of transplastomic tobacco was identified containing an antibiotic resistance gene unlinked from the intended transgene insertion as a result of an unintended recombination event, indicating that the homologous recombination events described here may hinder efficient recovery of plastid transformants containing the desired transgene. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Defining the minimal length of sequence homology required for selective gene isolation by TAR cloning

The transformation-associated recombination (TAR) cloning technique allows selective and accurate isolation of chromosomal regions and genes from complex genomes. The technique is based on in vivo recombination between genomic DNA and a linearized vector containing homologous sequences, or hooks, to the gene of interest. The recombination occurs during transformation of yeast spheroplasts that results in the generation of a yeast artificial chromosome (YAC) containing the gene of interest. To further enhance and refine the TAR cloning technology, we determined the minimal size of a specific hook required for gene isolation utilizing the Tg.AC mouse transgene as a targeted region. For this purpose a set of vectors containing a B1 repeat hook and a Tg.AC-specific hook of variable sizes (from 20 to 800 bp) was constructed and checked for efficiency of transgene isolation by a radial TAR cloning. When vectors with a specific hook that was ≥60 bp were utilized, ~2% of transformants contained circular YACs with the Tg.AC transgene sequences. Efficiency of cloning dramatically decreased when the TAR vector contained a hook of 40 bp or less. Thus, the minimal length of a unique sequence required for gene isolation by TAR is ~60 bp. No transgene-positive YAC clones were detected when an ARS element was incorporated into a vector, demonstrating that the absence of a yeast origin of replication in a vector is a prerequisite for efficient gene isolation by TAR cloning.     

A specific member of the Cab multigene family can be efficiently targeted and disrupted in the moss Physcomitrella patens

The analysis of phenotypic change resulting from gene disruption following homologous recombination provides a powerful technique for the study of gene function. This technique has so far been difficult to apply to plants because the frequency of gene disruption following transformation with constructs containing DNA homologous to genomic sequences is low (0.01 to 0.1%). It has recently been shown that high rates of gene disruption (up to 90%) can be achieved in the moss Physcomitrella patens using genomic sequences of unknown function. We have used this system to examine the specificity of gene disruption in Physcomitrella using a member of the Cab multigene family. We have employed the previously characterised Cab gene ZLAB1 and have isolated segments of 13 other closely related members of the Cab gene family. In the 199-bp stretch sequenced, the 13 new members of the Cab family show an average of 8.5% divergence from the DNA sequence of ZLAB1. We observed 304 silent substitutions and 16 substitutions that lead to a change in the amino acid sequence of the protein. We cloned 1029 bp of the coding region of ZLAB1 (including 177 of the 199 bp with high homology to the 13 new Cab genes) into a vector containing a selectable hygromycin resistance marker, and used this construct to transform P. patens. In three of nine stable transformants tested, the construct had inserted in, and disrupted, the ZLAB1 gene. There was no discernible phenotype associated with the disruption. We have therefore shown that gene disruption is reproducible in P. patens and that the requirement for sequence homology appears to be stringent, therefore allowing the role of individual members of a gene family to be analysed in land plants for the first time. Received: 2 February 1998 / Accepted: 15 October 1998     

Molecular analysis of the Cryptococcus neoformans ADE2 gene, a selectable marker for transformation and gene disruption.

Cryptococcus neoformans is an important fungal pathogen of man. The incidence of cryptococcal disease has increased dramatically in patients immunocompromised because of HIV infection, organ transplantation, or treatment with cytotoxic chemotherapy or corticosteroids. This organism is an excellent model for molecular dissection of fungal pathogenesis and virulence factors. Here we report the nucleotide sequence of the C. neoformans serotype D genomic ADE2 gene, which encodes a phosphoribosylaminoimidazole carboxylase required for purine biosynthesis. Importantly, this version of the ADE2 gene has been used as the selectable marker for virtually all gene disruptions by transformation and homologous recombination in C. neoformans. We compare the nucleotide and amino acid sequences of the ADE2 gene and product to other highly related adenine biosynthetic genes and enzymes from other yeasts and fungi. We also describe a series of convenient ADE2 cassettes for gene disruption construct preparation. Finally, we have identified the ade2 mutations in strains M001 and M049, adenine auxotrophic mutants derived from the serotype A strain H99. These mutant strains have served as recipients for targeted gene disruptions using the ADE2 gene. These studies should facilitate transformation and gene disruption approaches using the ADE2 selectable marker in this important human fungal pathogen.     

Transformation by integration in Podospora anserina. III. Replacement of a chromosome segment by a two-step process

Summary We have developed in Podospora anserina a two-step procedure for DNA sequence replacement through transformation which might be applicable to other filamentous fungi. Targeting of transforming DNAs to their homologous locus is achieved provided a cosmid vector is used. Southern blot analysis of genomic DNAs from a set of transformants is presented. The data confirm that cosmids integrate into the chromosome through mostly homologous recombination which leads to a duplicated sequence separated by the vector. This event was found to be unstable in crosses. We show that this instability is due to the frequent excision of the vector together with the selective marker and one copy of the duplication, either the resident or foreign sequence. The two sequences can be distinguished because they exhibit restriction fragment length polymorphism. Therefore, Podospora anserina treats duplications occurring through transformation in a way differing from that exhibited by Neurospora crassa and Ascobolus immersus.     

Gene inactivation in the plant pathogen Glomerella cingulata: three strategies for the disruption of the pectin lyase gene pnIA

The feasibility of performing routine transformation-mediated mutagenesis in Glomerella cingulata was analysed by adopting three one-step gene disruption strategies targeted at the pectin lyase gene pnIA. The efficiencies of disruption following transformation with gene replacement- or gene truncation-disruption vectors were compared. To effect replacement-disruption, G. cingulata was transformed with a vector carrying DNA from the pnlA locus in which the majority of the coding sequence had been replaced by the gene for hygromycin B resistance. Two of the five transformants investigated contained an inactivated pnlA gene (pnlA ^? );both also contained ectopically integrated vector sequences. The efficacy of gene disruption by transformation with two gene truncation-disruption vectors was also assessed. Both vectors carried a 5′and 3′truncated copy of the pnlA coding sequence, adjacent to the gene for hygromycin B resistance. The promoter sequences controlling the selectable marker differed in the two vectors. In one vector the homologous G. cingulata gpdA promoter controlled hygromycin B phosphotransferase expression (homologous truncation vector), whereas in the second vector promoter elements were from the Aspergillus nidulans gpdA gene (heterologous truncation vector). Following transformation with the homologous truncation vector, nine transformants were analysed by Southern hybridisation; no transformants contained a disrupted pnlA gene. Of nineteen heterologous truncation vector transformants, three contained a disrupted pnlA gene; Southern analysis revealed single integrations of vector sequence at pnlA in two of these transformants. pnlA mRNA was not detected by Northern hybridisation in pnlA-transformants. pnlA-transformants failed to produce a PNLA protein with a pI identical to one normally detected in wild-type isolates by silver and activity staining of isoelectric focussing gels. Pathogenesis on Capsicum and apple was unaffected by disruption of the pnlA gene, indicating that the corresponding gene product, PNLA, is not essential for pathogenicity. Gene disruption is a feasible method for selectively mutating defined loci in G. cingulata for functional analysis of the corresponding gene products.     

A method for making directed changes to the Fusarium graminearum genome without leaving markers or other extraneous DNA

A method is described which allows exact targeted changes to the Fusarium graminearum genome, including changes of as little as one particular base pair to gene-size insertions, replacements or modifications. The technique leaves no other DNA in the genome, such as marker genes, and can be used serially to effect multiple complex changes in any desired chromosomal locations. The method is based on our previous finding that after transformation, DNA with homology to F. graminearum DNA recombines itself into the genome in a predictable manner involving multiple tandem copies. We designed a cloning vehicle with a built-in hygromycin-resistance marker (hygB) which can be used to transform the fungus, and with cloning sites to carry DNA with any desired genomic modifications. To effect a desired genomic change the sequence changes of interest are incorporated between two adjacent borders homologous to F. graminearum DNA which will target them to the desired location. This modified DNA is attached within the cloning sites within the vehicle. Transformants are readily obtained in which tandem copies of the vehicle plus insert are inserted between the two genomic border sequence homologues. Progeny of a transformant are subsequently screened for those with a decreased resistance to the antibiotic, and then for those which have completely lost the marker and the entire vehicle, leaving only the desired sequence modifications between the two genomic border sequences which were targeted. This method is demonstrated by exactly replacing the trichodiene synthase (tri5) gene coding sequence (CDS) with that of a green fluorescence protein (gfp) gene with no other genomic changes. This derivative was then re-engineered to replace the gfp CDS with that of the wild type, exactly regenerating the original F. graminearum genome.     

PCR-based gene targeting in the filamentous fungus Ashbya gossypii

We have investigated a PCR-based approach for one-step gene targeting in the filamentous fungus Ashbya gossypii. Short guide sequences with 40-46 bp of homology to two sequences of a targeted gene, provided by PCR, were sufficient to mediate homologous recombination. The PCR products used for transformation were generated from the newly constructed chimeric selection marker GEN3. This consists of the open reading frame of the Escherichia coli kanR gene under the control of promoter and terminator sequences of the Saccharomyces cerevisiae TEF2 gene and allows selection of G418/geneticin-resistant transformants. Verification of gene targeting was performed either by PCR or by DNA hybridization analyses, and in all 18 cases tested, correct targeting was confirmed. This approach was used for the complete deletion of the open reading frame of the A. gossypii RHO4 gene for which a double-strand sequence was available as information source for the design of PCR primers. We also demonstrated successful partial deletion of four other ORFs using single-read sequences (SRS) as sole information for the design of targeting primers. A gossypii is the first filamentous fungus in which a PCR-based gene disruption technique has been established. Since short target guide sequences are sufficient to direct homologous integration into the A. gossypii genome it is not necessary to obtain and sequence large DNA fragments from a target locus to provide the long flanking homology regions usually required for efficient targeting of cloned disruption cassettes in filamentous fungi. Thus functional analysis of A. gossypii genes is already possible, based on single-pass sequence information.     

Homologous recombination and double-strand break repair in the transformation of Rhizopus oryzae

Genetic transformation of the Mucorales fungi has been problematic, since DNA transformed into the host rarely integrates and usually is mitotically unstable in the absence of selective pressure. In this study, transformation of Rhizopus oryzae was investigated to determine if the fate of introduced DNA could be predicted based on double-strand break repair and recombination mechanisms found in other fungi. A transformation system was developed with uracil auxotrophs of Rhizopus oryzae that could be complemented with the pyrG gene isolated in this work. DNA transformed as circular plasmids was maintained extrachromosomally in high-molecular-weight (>23 kb) concatenated arrangement. Type-I crossover integration into the pyrG locus and type-III pyrG gene replacement events occurred in approximately 1-5% of transformants. Linearization of the plasmid pPyr225 with a single restriction enzyme that cleaves within the vector sequence almost always resulted in isolates with replicating concatenated plasmids that had been repaired by end-joining recombination that restored the restriction site. The addition of a 40-bp direct repeat on either side of this cleavage site led to repair by homologous recombination between the repeated sequences on the plasmid, resulting in loss of the restriction site. When plasmid pPyr225 was digested with two different enzymes that cleave within the vector sequence to release the pyrG containing fragment, only pyrG gene replacement recombination occurred in transformants. Linearization of plasmid pPyr225 within the pyrG gene itself gave the highest percentage (20%) of type-I integration at the pyrG locus. However, end-joining repair and gene replacement events were still the predominant types of recombination found in transformations with this plasmid topology.     

黑曲霉pepD基因阻断突变菌株的构建及功能分析

运用同源重组技术破坏了黑曲霉基因组中的pepD基因,该基因编码一种类subtilisin的胞外蛋白酶PEPD。实验以黑曲霉GICC2773基因组DNA为模板,PCR扩增pepD基因,并在此基因中间插入潮霉素抗性基因(hph)表达单元,由此产生了3.7kb的pepD阻断基因片段。将此阻断基因片段与载体pBS连接,构建成pepD基因阻断质粒pBSDH。采用原生质体-CaCl2/PEG法将酶切阻断质粒得到的含pepD基因和hph表达单元的3.7kb线性片段转化AspergillusnigerGICC2773菌株,在含潮霉素的平板上筛选潮霉素抗性转化子,从这些抗性转化子中经PCR检测分离到到1个pepD基因阻断突变菌株?pepD66。外源漆酶分泌活性分析显示,黑曲霉pepD基因的破坏使其外源漆酶的分泌表达有所提高。