A solid-phase synthetic strategy for the preparation of peptide-based affinity labels: synthesis of dynorphin A analogs.

Solid-phase synthetic methodology was developed for the preparation of peptide-based affinity labels. The initial peptides synthesized were dynorphin A (Dyn A) analogs [Phe(p-X)4,D-Pro10]Dyn A(1-11)NH2 containing isothiocyanate (X=-N=C=S) and bromoacetamide (X=-NHCOCH2Br) groups. The peptides were assembled on solid supports using Fmoc-protected amino acids, and the side chain amine to be functionalized, Phe(p-NH2), was protected by the Alloc (allyloxycarbonyl) group. Following removal of the Alloc group by palladium(O), the reactive isothiocyanate and bromoacetamide functionalities were successfully introduced while the peptides were still attached to the resin. Synthesis of these peptides was carried out on polystyrene (PS) and polyethylene glycol-polystyrene (PEG-PS) resins containing the PAL [peptide amide linker, 5-(4-Fmoc-aminomethyl-3,5-dimethoxyphenoxy)valeric acid] linker. Both the rate of Alloc deprotection and the purity of the crude affinity-labeled peptides obtained were found to be dependent on the resin used for peptide assembly.     

3-(1-Piperidinyl)alanine formation during the preparation ofC-terminal cysteine peptides with the Fmoc/t-Bu strategy

Summary Several side reactions have been detected for cysteine-containing peptides. During the synthesis ofC-terminal cysteine peptides, a base-catalyzed elimination of the sulfhydryl-protected side-chain to afford the dehydroalanine derivative followed by a nucleophilic addition to the alkene was observed. MALDI-TOF analysis was a useful analytical technique to determine this phenomenon.Abbreviations Acm acetamidomethyl - Boc tert-butyloxycarbonyl - t-Bu tert-butyl - DBU 1,8-diazabicyclo[5.4.0]undec-7-ene - DIEA N,N-diisopropylethylamine - DMF N,N-dimethylformamide - Fmoc 9-fluorenylmethyloxycarbonyl - HATU N-[(dimethylamino)-1H-1,2,3-triazolo[4,5-b]pyridin-1-yl-methylene]-N-methylmethanaminium hexafluorophosphateN-oxide - HBTU N-[(1H-benzotriazol-1-yl)(dimethylamino)methylene]-N-methylmethanaminium hexafluorophosphateN-oxide - HOAt 1-hydroxy-7-azabenzotriazole - HOBt 1-hydroxybenzotriazole - HPLC high-performance liquid chromatography - MALDI-TOF matrix-assisted laser desorption/ionization time-of-flight mass spectrometry - PAC 4-hydroxymethylphenoxyacetic acid handle - PAL 5-(4-(9-fluorenylmethyloxycarbonyl)aminomethyl-3,5-dimethoxy-phenoxy)valeric acid handle - PEG-PS polyethylene glycol-polystyrene graft supports - PS polystyrene - Reagent R TFA/thioanisole/1,2-ethanedithiol/anisole (90:5:3:2) - S-t-Bu S-tert-butyl mercapto - TFA trifluoroacetic acid - Trt triphenylmethyl. Amino acid symbols denote thel-configuration, unless indicated otherwise     

Anchor-linked intermediates in peptide amide synthesis are caused by dimeric anchors on the solid supports

Cleavage and kinetic studies have been carried out using commercially obtained H-Tyr(tBu)-5-(4′-aminomethyl-3′,5′-dimethoxyphenoxy)valeric acid-TentaGelS (H-Tyr(tBu)-4-ADPV-TentaGelS) and H-Tyr (tBu)-4-ADPV-Ala-aminomethyl-resin (H-Tyr(tBu)-4-ADPV-AM-resin) prepared from commercially available resin and loaded with commercially available Fmoc-4-ADPV-OH amide anchor. Cleavage with pure trifluoroacetic acid (TFA) gave the intermediate H-Tyr-4-ADPV-NH₂, which was then degraded to H-Tyr-NH₂, and cleavage with TFA/dichloromethane (1:9) yielded H-Tyr-4-ADPV-NH₂ which could be isolated in preparative amounts. Cleavage reactions with ¹⁵N-labelled H-Ala-4-ADPV-[¹⁵N]-Gly-AM-resin yielded the intermediate H-Ala-4-ADPV-NH₂, which contained no ¹⁵N as demonstrated by ¹H-NMR. The analysis of the commercial Fmoc-4-ADPV-OH amide anchor showed the presence of Fmoc-4-ADPV-4-ADPV-OH as an impurity in high amounts. This dimeric anchor molecule is the cause of formation of the anchor-linked peptide intermediate obtained during the cleavage from the resin. The particularly high acid-lability of the amide bond between the two ADPV moieties was utilized to synthesize sidechain and C-terminally 4-ADPV protected pentagastrin on a double-anchor resin, and to cleave it using 5% trifluoroacetic acid in dichloromethane. This method may offer a new way for the synthesis of protected peptide amides with improved solubility to be used in fragment condensation.     

Synthesis, characterization, and evaluation of a novel 99mTc(CO)3 pyrazolyl conjugate of a peptide nucleic acid sequence

The 16-mer peptide nucleic acid sequence H-A GAT CAT GCC CGG CAT-Lys-NH₂ (1), which is complementary to the translation start region of the N-myc oncogene messenger RNA, was synthesized and conjugated to a pyrazolyl diamine bifunctional chelator (pz). The novel conjugate pz-A GAT CAT GCC CGG CAT-Lys-NH₂ (2) was labeled with technetium tricarbonyl, yielding quantitatively the complex fac-[^99mTc(CO)₃(κ³-pz-A GAT CAT GCC CGG CAT-Lys-NH₂)]²⁺ (4). Complex 4 was obtained with high radiochemical purity and high specific activity, revealing high stability in human serum and in cell culture medium. The identity of 4 was confirmed by comparing its reversed-phase high performance liquid chromatography profile with that of the rhenium analog fac-[Re(CO)₃(κ³-pz-A GAT CAT GCC CGG CAT-Lys-NH₂)]²⁺ (3), prepared by conjugation of fac-[Re(CO)₃(3,5-Me₂pz(CH₂)₂N((CH₂)₃COOH)(CH₂)₂NH₂)]⁺ to 1, using solid-phase techniques. UV melting experiments of 1 and 3 with the complementary DNA sequence led to the formation of stable duplexes, indicating that the conjugation of 1 to the pyrazolyl chelator and to the metal fragment fac-[M(CO)₃]⁺ did not affect the recognition of the complementary sequence as well as the duplex stability. For a first screening, SH-SY5Y human neuroblastoma cells, which express N-myc, were treated with 4. The results show that 4 internalizes (7% of the activity goes into the cells, after 4 h at 37 °C), presenting also a relatively high cellular retention (only 40% of internalized activity is released from the cells after 5 h). An erratum to this article can be found at     

Design and Synthesis of LNA-Based Mercaptoacetamido-Linked Nucleoside Dimers

Three LNA-based mercaptoacetamido-linked nonionic nucleoside dimers T^L-S-T, T-S-T^L , and T^L-S-T^L have been synthesized by HOBT and HBTU catalyzed condensation of silyl-protected 2-S-(thymidin-5?′-yl)mercaptoacetic acid or 2-S-(2?′-O,4?′-C-methylenethymidin-5?′-yl)mercaptoacetic acid with 3?′-amino-3?′-deoxy-5?′-O-DMT-2?′-O,4?′-C-methylenethymidine or with 3?′-amino-3?′-deoxy-5?′-O-DMT-β-thymidine followed by desilylation of the protected dimers. The 3?′-O-phosphoramidite derivative of one of the nucleoside dimers was successfully prepared by condensation with [P(-Cl)(-OCH₂CH₂CN)-N(iPr)₂}] in DCM in the presence of N,N-diisopropylethylamine (DIPEA), which is a building block for the preparation of mercaptoacetamido-linked oligonucleotides of therapeutic applications.     

N 5,N 10-Methenyltetrahydromethanopterin cyclohydrolase from the extremely thermophilic sulfate reducing Archaeoglobus fulgidus: comparison of its properties with those of the cyclohydrolase from the extremely thermophilic Methanopyrus kandleri

Archaeoglobus fulgidus and Methanopyrus kandleri are both extremely thermophilic Archaea with a growth temperature optimum at 83°C and 98°C, respectively. Both Archaea contain an active N ⁵,N ¹⁰-methenyltetrahydromethanopterin cyclohydrolase. The enzyme from M. kandleri has recently been characterized. We describe here the purification and properties of the enzyme from A. fulgidus.The cyclohydrolase from A. fulgidus was purified 180-fold to apparent homogeneity and its properties were compared with those recently published for the cyclohydrolase from M. kandleri. The two cytoplasmic enzymes were found to have very similar molecular and catalytic properties. They differed, however, significantly with respect of the effect of K₂HPO₄ and of other salts on the activity and the stability. The cyclohydrolase from A. fulgidus required relatively high concentrations of K₂HPO₄ (1 M) for optimal thermostability at 90°C but did not require salts for activity. Vice versa, the enzyme from M. kandleri was dependent on high K₂HPO₄ concentrations (1.5 M) for optimal activity but not for thermostability. Thus the activity and structural stability of the two thermophilic enzymes depend in a completely different way on the concentration of inorganic salts. The molecular basis for these differences are discussed.Abbreviations H₄MPT tetrahydromethanopterin - MFR methanofuran - CH₃–H₄MPT N ⁵-methyl-H₄MPT - CH₂=H₄MPT N ⁵,N ¹⁰-methylene-H₄MPT - CH₂H₄MPT N ⁵,N ¹⁰-methenyl-H₄MPT - CHO–H₄MPT N ⁵ formyl-H₄MPT - CHO-MFR formyl-MFR - cyclohydrolase N ⁵,N ¹⁰-methenyltetrahydromethanopterin cyclohydrolase - MOPS 3-(N-morpholino) propane sulfonic acid - TRICINE N-tris (hydroxymethyl) methyl glycine - 1 U=1 mol/min     

The synthesis of 2-nitroaryl-1,2,3,4-tetrahydroisoquinolines, nitro-substituted 5,6-dihydrobenzimidazo[2,1-a]isoquinoline N-oxides and related heterocycles as potential bioreducible substrates for the enzymes NAD(P)H: quinone oxidoreductase 1 and E. coli nitroreductase

A series of 2-nitroaryl-1,2,3,4-tetrahydroisoquinolines 10 and nitro-substituted 5,6-dihydrobenzimidazo[2,1-a]isoquinoline N-oxides 11 have been synthesised and evaluated as potential bioreducible substrates for the enzymes NAD(P)H: quinone oxidoreductase 1 (NQO1) and Escherichia coli nitroreductase (NR). Also prepared and evaluated were 2-(3,5-dinitropyridin-2-yl)-1,2,3,4-tetrahydroisoquinoline 12 and 5,6-dihydro-10-nitropyrido[3″,2″:4′,5′]imidazo[2′,1′-a]isoquinoline 12-oxide 13. Both compounds 10b and 13 were reduced faster by human NQO1 than by CB-1954 [5-(aziridin-1-yl)-2,4-dinitrobenzamide].     

Novel achiral titanocene anti-cancer drugs synthesised from bis-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino fulvene and lithiated heterocyclic compounds

Abstract From the carbolithiation of 6-bis-N,N-dimethylamino fulvene (3a) and different ortho-lithiated heterocycles (furan, thiophene and N-methylpyrrole), the corresponding lithium cyclopentadienide intermediate (4a–c) was formed. These three lithiated intermediates underwent a transmetallation reaction with TiCl₄ resulting in bis-N,N-dimethylamino-functionalised titanocenes 5a–c. When these titanocenes were tested against LLC-PK cells, the IC₅₀-values obtained were of 240, and 270 μM for titanocenes 5b and 5c, respectively. The most cytotoxic titanocene in this paper, 5a with an IC₅₀-value of 36 μM was found to be approximately six times less cytotoxic than its mono-N,N-dimethylamino substituted analogue Titanocene C (IC₅₀ = 5.5 μM) and almost ten times less cytotoxic than cisplatin, which showed an IC₅₀-value of 3.3 μM, when tested on the LLC-PK cell line. Graphical abstract Bis-(bis- (N,N-dimethylamino)-2-(N′-methylpyrrolyl)methylcyclopentadienyl) titanium (IV) dichloride, {η⁵-C₅H₄-CH[N(CH₃)₂]₂[C₅H₃NCH₃]}₂TiCl₂ was synthesised starting from 6-bis-(N,N-dimethylamino) fulvene and 2-N-methylpyrrolyl lithium. Herein, we present the synthesis and DFT structure of the titanocene and two further derivatives followed by MTT-based cytotoxicity tests on pig kidney epithelial (LLC-PK) cells. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Heterobifunctionalized tetraethylene glycol: A spacer for surface attachment of viral peptide epitopes for ELISA and derivatization of membrane modifying peptides

Summary New hydrophilic linkers of the formula Fmoc-NHCH₂CH₂COO(CH₂CH₂O)₄X (X=COCH₂CH₂COOH Fmoc-Ats (2), X=CONHCH₂COOH Fmoc-Atg (4) and X=CONHCH₂CH₂COOH Fmoc-Ata (5) have been prepared by heterobifunctional modification of tetraethylene glycol as starting material. These linkers represent a useful tool for solid phase peptide synthesis according to Fmoc/tBu strategy. Two examples are presented to illustrate the applicability of these building blocks: (i) spacing between biotin and a peptide epitope of the hepatitis C virus and evaluation in a biotin-streptavidin ELISA, and (ii) coupling of the new linker to the N- and C-terminus of the peptide antibiotic alamethicin to show eventual influences on the peptide's α-helical conformation.     

N 5,N 10-Methenyltetrahydromethanopterin cyclohydrolase from the extreme thermophile Methanopyrus kandleri: increase of catalytic efficiency (kcat/K M) and thermostability in the presence of salts

The activity of purified N ⁵,N ¹⁰-methenyltetrahydromethanopterin cyclohydrolase from Methanopyrus kandleri was found to increase up to 200-fold when potassium phosphate was added in high concentrations (1.5 M) to the assay. A 200-fold stimulation was also observed with sodium phosphate (1 M) and sodium sulfate (1 M) whereas stimulation by potassium sulfate (0.8 M), ammonium sulfate (1.5 M), potassium chloride (2.5 M), and sodium chloride (2 M) was maximal 100-fold. A detailed kinetic analysis of the effect of potassium phosphate revealed that this salt exerted its stimulatory effect by decreasing the K _m for N ⁵,N ¹⁰-methenyltetrahydromethanopterin from 2 mM to 40 M and by increasing the V _max from 2000 U/mg (k_cat=1385 s^-1) to 13300 U/mg (k_cat=9200 s^-1). Besides increasing the catalytic efficiency (k_cat/K _m) salts were found to protect the cyclohydrolase from heat inactivation. For maximal thermostability much lower concentrations (0.1 M) of salts were required than for maximal activity.Abbreviations H₄MPT tetrahydromethanopterin - N ⁵,N ¹⁰-methenyl-H₄MPT - CHO-H₄MPT N ⁵-formyl-H₄-MPT - CH₂=H₄MPT N ⁵,N ¹⁰-methylene-H₄MPT - CH₃–H₄-MPT N ⁵-methyl-H₄MPT - MOPS -N-morpholinopropane sulfonic acid - TRICINE N-[Tris(hydroxymethyl)-methyl]glycine - 1 U = 1 mol/min     

Ethylene is involved in the autochemotropism of Phycomyces

The sporangiophore of the fungus Phycomyces blakesleeanus has the property of growing away from a barrier which is few mm from the growing zone of the sporangiophore (avoidance or autochemotropic response). A model has been published (Cohen, R.J., Jan, N.Y., Matricon, J., Delbrück, M.: J. Gen. Physiol. 66, 67–95 (1975)). To explain the avoidance response which postulates that the sporangiophore emits and readsorbs a volatile growth-promoting effector (gas X) and that the barrier modifies the effector distribution by acting as an aerodynamic obstacle, causing a higher concentration of gas X on the side of the sporangiophore closer to the barrier. From this model we deduced three properties of the gas X. Of the several gases tested (N₂, CO₂, CH₄, C₂H₂, C₂H₄, C₂H₆) only ethylene (C₂H₄) had all these three properties, a finding which suggests that it has a role in the avoidance response (autochemotropism).Abbreviation Spph Sporangiophore     

Purification,properties and primary structure of H2-formingN 5,N10-methylenetetrahydromethanopterin dehydrogenase fromMethanococcus thermolithotrophicus

H₂-FormingN ⁵,N¹⁰-methylenetetrahydromethanopterin dehydrogenase (Hmd) is a novel type of hydrogenase found in methanogenic Achaea that contains neither nickel nor iron-sulfur clusters. The enzyme has previously been characterized fromMethanobacterium thermoautotrophicum and fromMethanopyrus kandleri. We report here on the purification and properties of the enzyme fromMethanococcus thermolithotrophicus. Thehmd gene was cloned and sequenced. The results indicate that the enzyme fromMc. thermolithotrophicus is functionally and structurally closely related to the H₂-forming methylene tetrahydromethanopterin dehydrogenase fromMb. thermoautotrophicum andMp. kandleri. From amino acid sequence comparisons of the three enzymes, a phylogenetic tree was deduced that shows branching orders similar to those derived from sequence comparisons of the 16S rRNA of the orders Methanococcales, Methanobacteriales, and Methanopyrales.Abbreviations H ₂ Forming dehydrogenase orHmd - H₂-FormingN ⁵,N¹⁰ methylene tetrahydromethanopterin dehydrogenase - H ₄MPT Tetrahydromethanopterin - CH ₂=H₄MPT N⁵,N¹⁰ Methylene tetrahydromethanopterin - CHH ₄MPT⁺ N⁵,N¹⁰ Methenyltetrahydromethanopterin - MALDI-TOF-MS Matrix-assisted laser desorption     

DFT study of new bipyrazole derivatives and their potential activity as corrosion inhibitors

In the present work, a theoretical study of five bipyrazolic-type organic compounds, 4-{bis[(3,5-dimethyl-1H-pyrazolyl-1-yl)methyl]-amino}phenol (1), N1,N1-bis[(3,5-dimethyl-1H-pyrazol-1-yl)methyl}]-N4,N4-dimethyl-1,4-benzenediamine (2), N,N-bis[(3,5-dimethyl-1H-pyrazol-1-yl)methyl]aniline (3), 4-[bis(3,5-dimethyl pyrazol-1-yl-methyl)-amino]butan-1-ol (4) and ethyl4-[bis(3,5-dimethyl-1H-pyrazol-1-yl-methyl) aminobenzoate] (5), has been performed using density functional theory (DFT) at the B3LYP/6-31G(d) level in order to elucidate the different inhibition efficiencies and reactive sites of these compounds as corrosion inhibitors. The efficiencies of corrosion inhibitors and the global chemical reactivity relate to some parameters, such as EHOMO, ELUMO, gap energy (ΔE) and other parameters, including electronegativity (χ), global hardness (η) and the fraction of electrons transferred from the inhibitor molecule to the metallic atom (ΔN). The calculated results are in agreement with the experimental data on the whole. In addition, the local reactivity has been analyzed through the Fukui function and condensed softness indices.     

Coenzyme F420 dependent N5, N10-methylenetetrahydromethanopterin dehydrogenase in methanol grown Methanosarcina barkeri

The dehydrogenation of N ⁵,N ¹⁰-methylenetetrahydromethanopterin (CH₂=H₄MPT) to N ⁵,N ¹⁰-methenyltetrahydromethanopterin (CH≡H₄MPT⁺) is an intermediate step in the oxidation of methanol to CO₂ in Methanosarcina barkeri. The reaction is catalyzed by CH₂=H₄MPT dehydrogenase, which was found to be specific for coenzyme F₄₂₀ as electron acceptor; neither NAD, NADP nor viologen dyes could substitute for the 5-deazaflavin. The dehydrogenase was anaerobically purified almost 90-fold to apparent homogeneity in a 32% yield by anion exchange chromatography on DEAE Sepharose and Mono Q HR, and by affinity chromatography on Blue Sepharose. Sodium dodecyl sulfate/polyacrylamide gel electrophoresis revealed only one protein band with an apparent mass of 31 kDa. The apparent molecular mass of the native enzyme determined by polyacrylamide gradient gel electrophoresis was 240 kDa. The ultraviolet/visible spectrum of the purified enzyme was almost identical to that of albumin suggesting the absence of a chromophoric prosthetic group. Reciprocal plots of the enzyme activity versus the substrate concentrations were linear: the apparent K _m for CH₂=H₄MPT and for coenzyme F₄₂₀ were found to be 6 μM and 25 μM, respectively. V_max was 4,000 μmol min^-1·mg^-1 protein (k_cat=2,066 s^-1) at pH 6 (the pH optimum) and 37°C. The Arrhenius activation energy was 40 kJ/mol. The N-terminal amino acid sequence was found to be 50% identical with that of the F₄₂₀-dependent CH₂=H₄MPT dehydrogenase isolated from H₂/CO₂ grown Methanobacterium thermoautotrophicum.     

Effect of experimental nitrogen load on methane and nitrous oxide fluxes on ombrotrophic boreal peatland

Methane (CH₄) and nitrous oxide (N₂O) dynamics were studied in a boreal Sphagnum fuscum pine bog receiving annually (from 1991 to 1996) 30 or 100 kg NH₄NO₃-N ha^–1. The gas emissions were measured during the last three growing seasons of the experiment. Nitrogen treatment did not affect the CH₄ fluxes in the microsites where S. fuscum and S. angustifolium dominated. However, addition of 100 kg NH₄NO₃-N ha^–1 yr^–1 increased the CH₄ emission from those microsites dominated by S. fuscum. This increase was associated with the increase in coverage of cotton grass (Eriophorum vaginatum) induced by the nitrogen treatment. The differences in the CH₄ emissions were not related to the CH₄ oxidation and production potentials in the peat profiles. The N₂O fluxes were negligible from all microsites. Only minor short-term increases occurred after the nitrogen addition.     

Ribosylation of the Base Residue of Inosine Derivatives by Phase-Transfer Catalysis

Abstract

Reaction of 2′,3′,5′-O-silylated inosine derivative 1 with 2, 3-O-isopropylidene-5-O-tritylribosyl chloride (3) in a two-phase (CH₂Cl₂-aq. NaOH) system in the presence of Bu₄NBr gave three products, i. e., 6-O-α-, 6-O-β-, and N ¹-β-isomers of glycosides 4, 5a, and 5b. A similar PTC reaction of 1 with 2, 3, 5-tri-O-benzylribosyl bromide (9) gave four regio- and stereo-isomers involving the N¹-β-glycoside 10. Reaction of 1 with 2, 3, 5-tri-O-benzoylribosyl bromide (11) afforded three products involving the desired N¹-β-glycoside 12b, which could be deprotected to give N ¹-ribosylinosine (15b) as a useful intermediate for the synthesis of cIDPR.

     

Two N 5, N 10-methylenetetrahydromethanopterin dehydrogenases in the extreme thermophile Methanopyrus kandleri: characterization of the coenzyme F420-dependent enzyme

It was recently reported that the extreme thermophile Methanopyrus kandleri contains only a H₂-forming N ⁵, N ¹⁰-methylenetetrahydromethanopterin dehydrogenase which uses protons as electron acceptor. We describe here the presence in this Archaeon of a second N ⁵,N ¹⁰-methylenetetrahydromethanopterin dehydrogenase which is coenzyme F₄₂₀-dependent. This enzyme was purified and characterized. The enzyme was colourless, had an apparent molecular mass of 300 kDa, an isoelectric point of 3.7±0.2 and was composed of only one type of subunit of apparent molecular mass of 36 kDa. The enzyme activity increased to an optimum with increasing salt concentrations. Optimal salt concentrations were e.g. 2 M (NH₄)₂SO₄, 2 M Na₂HPO₄, 1.5 M K₂HPO₄, and 2 M NaCl. In the absence of salts the enzyme exhibited almost no activity. The salts affected mainly the V _max rather than the K _m of the enzyme. The catalytic mechanism of the dehydrogenase was determined to be of the ternary complex type, in agreement with the finding that the enzyme lacked a chromophoric prosthetic group. In the presence of M (NH₄)₂SO₄ the V _max was 4000 U/mg (k _cat=2400 s^-1) and the K _m for N ⁵,N ¹⁰-methylenetetrahydromethanopterin and for coenzyme F₄₂₀ were 80 M and 20 M, respectively. The enzyme was relatively heat-stable and lost no activity when incubated anaerobically in 50 mM K₂HPO₄ at 90°C for one hour. The N-terminal amino acid sequence was found to be similar to that of the F₄₂₀-dependent N ⁵, N ¹⁰-methylenetetrahydromethanopterin dehydrogenase from Methanobacterium thermoautotrophicum, Methanosarcina barkeri, and Archaeoglobus fulgidus.Abbreviations H₄MPT tetrahydromethanopterin - F₄₂₀ coenzyme F₄₂₀ - CH₂=H₄MPT N ⁵,N ¹⁰-methylenetrahydromethanopterin - CHH₄MPT⁺ N ⁵,N ¹⁰-methenyltetrahydromethanopterin - methylene-H₄MPT dehydrogenase N ⁵,N ¹⁰-methylenetetrahydromethanopterin dehydrogenase - Mops N-morpholinopropane sulfonic acid - Tricine N-[Tris(hydroxymethyl)-methyl]glycine - 1 U = 1 mol/min     

Conformational Properties of the CalliFMRF-Amide Series Neuropeptides

Conformational properties of five neuropeptides belonging to the calliFMRF-amide series with the Xaa-Pro-Yaa-Gln-Asp-Phe-Met-Arg-Phe-NH₂ homologous sequences were studied by the method of theoretical conformational analysis. Three members of these group [(1) (Xaa = Thr, Yaa = Gln), (2) (Xaa = Thr, Yaa = Ser), and (3) (Xaa = Yaa = Ser)] can stimulate the saliva secretion from the separated salivary gland of the Calliphora vomitoria fly, whereas two other calliFMRF-amides [(4) (Xaa = Lys, Yaa = Asn) and (5) (Xaa = Ala, Yaa = Gly)] are inactive in this biological test. Low-energy spatial structures of the studied compounds were determined by a conformational analysis. A comparison of the stable structures of the biologically active and inactive neuropeptides revealed a similarity in their conformational properties and allowed determination of the role of separate residues in the peptide folding. The calculations demonstrated that the C-terminal hexapeptide fragment identical in all the five peptides tends to form -helical structure, whereas the variable N-terminal tripeptide regions of calliFMRF-amides (1)–(5) form more conformationally flexible structures.     

Synthesis and bioactivity of 5-(1-aryl-1H-tetrazol-5-ylsulfanylmethyl)-N-xylopyranosyl-1,3,4-oxa(thia)diazol-2-amines

A series of new N′-[N-(2,3,4-tri-O-acetyl-β-d-xylopyranosyl)thiocarbamoyl]-2-[(1-aryl-1H-tetrazol-5-yl)sulfanyl]acetohydrazides 5a–5e were synthesized rapidly in high yields from 2-(1-aryl-1H-tetrazol-5-ylsulfanyl)acetohydrazides 3a–3e and 2,3,4-tri-O-acetyl-β-d-xylopyranosyl isothiocyanate 4, then 5a–5e were converted to a series of new 5-(1-aryl-1H-tetrazol-5-ylsulfanylmethyl)-N-(2,3,4-tri-O-acetyl-β-d-xylopyranosyl)-1,3,4-oxadiazole-2-amines 6a–6e and 5-(1-aryl-1H-tetrazol-5-ylsulfanylmethyl)-N-(2,3,4-tri-O-acetyl-β-d-xylopyranosyl)-1,3,4-thiadiazole-2-amines 7a–7e, respectively under mercuric acetate/alcohol system or acetic anhydride/phosphoric acid system, then deacetylated in the solution of CH₃ONa/CH₃OH. All of the novel compounds were characterized by IR, ¹H NMR, ¹³C NMR, MS and elemental analysis. The structures of compounds 2e, 3e, 5a and 5c have been determined by X-ray diffraction analysis. Some of the synthesized compounds displayed PTP1B inhibition and microorganism inhibition.     

Photoanalogues of the Initiation Substrates of the RNA Polymerase II, 5‐Azido‐2‐Nitrobenzoyl Derivatives of the ATP γ‐Amidophosphate: The Possible Photoinduced Degradation of the Functional Group to an N‐Arylhydroxylamine

Photoanlogues of the initiation substrates of the RNA polymerase II, N₃Ar‐ NH(CH₂)_nNHpppA where N₃Ar is 5‐azido‐2‐nitrobenzoyl group (n = 2 or 4) were synthesized, allowing the preparation of photoreactive oligonucleotides in situ by RNA polymerase II for application as photolabels. Photolysis of p‐nitro‐substituted aromatic azide in aqueous medium was investigated. Using the azoxy‐coupling reaction it was possible to determine whether a nitrene or p‐nitrophenyl hydroxylamine azoxy compound is the trappable intermediate that is generated at ambient temperature in aqueous solution.