Regulation of cell shape and adhesion by CD34

We previously reported that expression of CD43/leukosialin induces cell rounding and microvillus formation via inhibition of cell adhesion. Here, we found that CD34, a cell surface sialomucin and marker for hematopoietic progenitor cells, also inhibited cell adhesion and induced cell rounding and microvillus formation. Forced expression of CD34-induced cell rounding, microvillus formation, and phosphorylation of ezrin/radixin/moesin (ERM) proteins in HEK293T cells, while inhibiting integrin-mediated cell re-attachment. Furthermore, CD34+ blood cells and KG-1 cells, which express endogenous CD34 on their surface, were spherical in shape, surrounded by microvilli, and non-adherent to substrata. In addition, cleavage of O-sialomucin augmented integrin-mediated cell adhesion of KG-1 cells. These results suggest the involvement of CD34 in the inhibition of integrin-mediated cell adhesion and formation of the cell surface structure. The inhibitory function of CD34 in cell adhesion may affect cell shape organization via phosphorylation of ERM proteins. Cellular structures such as the spherical shape and microvilli of CD34+ cells may also contribute to regulation of cell adhesion.     

Unique morphology of HeLa cell attachment, spreading and detachment from microcarrier beads covalently coated with a specific and non-specific substratum

A SEM and TEM evaluation of adhesion of HeLa-S3 cells to suspensions of culture microcarriers coated with various substrata revealed two unique cell morphologies. One is similar to that for cells attaching to culture dishes and the other one only appeared with microcarriers stirred under high shear conditions. The usual appearance of a spreading cell is to change from a sphere to the shape of a 'fried egg'. This proceeded in HeLa cells by a radial extension of the filopodia in between which the cytoplasm subsequently filled. Fluorescent antibody staining of actin suggested that more actin was present at the periphery of the spreading edges of the cell than inwards. The above morphology was characteristic of HeLa cell attachment to gelatin-coated microcarriers. However, the morphology of the attachment to microcarriers coated with non-biological substances such as negatively charged sulfonate groups or positively charged polyethyleneimine or even with the attachment protein laminin was quite different. Here the cells attached and began to spread as with gelatin-microcarriers, however, the spreading was not radial but occurred from one or two major regions of the cell periphery. The cell then appeared to constrict with the formation of a substratum attached pedestal upon which the cell body was perched. With time the cell pinched-off from pedestal. Evidence indicated that the pedestal was quite fragile. Furthermore, fluorescent antiactin staining indicated that the initial spreading region contained abundant actin which was depleted upon pedestal formation and detachment. The above in addition to previous kinetic measurements provided the information to classify cell substrate attachment materials into two distinct types. One is specific substrata which promote normal attachment and spreading and appear to interact with specific cell surface proteins. The other is non-specific substrata which in high shear conditions induces pedestal formation followed by pinching-off of the cells. Had previous attachment assays been done under high shear as done with the microcarriers and HeLa cells it is likely that substrata classified as specific might be reclassified into non-specific.     

Amphiphilic cationic peptides mediate cell adhesion to plastic surfaces

Four amphiphilic peptides, each with net charges of +2 or more at neutrality and molecular weights under 4 kilodaltons, were found to mediate the adhesion of normal rat kidney fibroblasts to polystyrene surfaces. Two of these peptides, a model for calcitonin (peptide 1, MCT) and melittin (peptide 2, MEL), form amphiphilic alpha-helical structures at aqueous/nonpolar interfaces. The other two, a luteinizing hormone-releasing hormone model (peptide 3, LHM) and a platelet factor model (peptide 4, MPF) form beta-strand structures in amphiphilic environments. Although it contains only 10 residues, LHM mediated adhesion to surfaces coated with solutions containing as little as 10 pmoles/ml of peptide. All four of these peptides were capable of forming monolayers at air-buffer interfaces with collapse pressures greater than 20 dynes/cm. None of these four peptides contains the tetrapeptide sequence Arg-Gly-Asp-Ser, which has been associated with fibronectin-mediated cell adhesion. Ten polypeptides that also lacked the sequence Arg-Gly-Asp-Ser but were nonamphiphilic and/or had net charges less than +2 at neutrality were all incapable of mediating cell adhesion (Pierschbacher and Ruoslahti, 1984). The morphologies of NRK cells spread on polystyrene coated with peptide LHM resemble the morphologies on fibronectin-coated surfaces, whereas cells spread on surfaces coated with MCT or MEL exhibit strikingly different morphologies. The adhesiveness of MCT, MEL, LHM, and MPF implies that many amphiphilic cationic peptides could prove useful as well defined adhesive substrata for cell culture and for studies of the mechanism of cell adhesion.     

"Gap guidance" of fibroblasts and epithelial cells by discontinuous edged surfaces

Cell adhesion, shape, and directed migration are some of the fundamental processes underlying tissue development and organization. The setting of geometric limits on cellular behavior has led to the hypothesis that a continuous edge is required to elongate a cell and guide its direction of movement. The aim of this study was to examine the validity of this hypothesis by examining the response of human gingival fibroblasts and periodontal ligament epithelial cells, to microfabricated surfaces that incorporate discontinuous edges. Cell response was assessed through spreading, morphology, cytoskeletal organization, and time-lapse microscopy, on substrata with a pattern of repeated open boxes with gaps at the corners. Fibroblasts attached and spread within 6 h, adopting either a square, triangular, or diagonally elongated morphology. Epithelial cells took longer to adhere, but were observed to adopt morphologies similar to those of the fibroblasts. Addition of colcemid or cytochalasin-D attenuated the orientation and alignment of both fibroblasts and epithelial cells. Fibroblasts and epithelial cell migration was guided diagonally in their movement through gaps in the square pattern, demonstrating that a continuous edge is not a prerequisite for guided cell migration.     

The relative importance of topography and RGD ligand density for endothelial cell adhesion

The morphology and function of endothelial cells depends on the physical and chemical characteristics of the extracellular environment. Here, we designed silicon surfaces on which topographical features and surface densities of the integrin binding peptide arginine-glycine-aspartic acid (RGD) could be independently controlled. We used these surfaces to investigate the relative importance of the surface chemistry of ligand presentation versus surface topography in endothelial cell adhesion. We compared cell adhesion, spreading and migration on surfaces with nano- to micro-scaled pyramids and average densities of 6×10(2)-6×10(11) RGD/mm(2). We found that fewer cells adhered onto rough than flat surfaces and that the optimal average RGD density for cell adhesion was 6×10(5) RGD/mm(2) on flat surfaces and substrata with nano-scaled roughness. Only on surfaces with micro-scaled pyramids did the topography hinder cell migration and a lower average RGD density was optimal for adhesion. In contrast, cell spreading was greatest on surfaces with 6×10(8) RGD/mm(2) irrespectively of presence of feature and their size. In summary, our data suggest that the size of pyramids predominately control the number of endothelial cells that adhere to the substratum but the average RGD density governs the degree of cell spreading and length of focal adhesion within adherent cells. The data points towards a two-step model of cell adhesion: the initial contact of cells with a substratum may be guided by the topography while the engagement of cell surface receptors is predominately controlled by the surface chemistry.     

Bioactivity of immobilized hyaluronic acid derivatives regarding protein adsorption and cell adhesion

Hyaluronic acid (HA) was chemically modified either by oxidation to obtain aldehyde-HA (aHA) or 3,3'-dithiobis(propanoic hydrazide) to obtain thiol-HA (tHA) that was covalently immobilized on model substrata such as amino-terminated surfaces or gold. Knowledge about the effect of modification with HA on physicochemical surface properties of these substrata and estimates of the quantities of immobilized HA were obtained by different physical methods such as contact angle measurements, ellipsometry, and atomic force microscopy. The bioactivity of aHA and tHA toward their natural binding partner aggrecan was studied by comparing surface plasmon resonance to native HA; this shows that binding of aggrecan was achieved in a similar way. Dermal human fibroblasts were used as a model cell to study how chemical modification and immobilization of HA impact adhesion and spreading of cells, which also affects cell growth and differentiation. A lower number and spreading of cells were observed on HA-modified surfaces compared to amino- and vinyl-terminated glass and silicon surfaces. Immunofluorescence microscopy also revealed that adhesion of fibroblast plated on HA-modified surfaces was mediated primarily by HA receptor CD44, indicating that bioactivity of HA was not significantly reduced by chemical modification.     

Microexudates from Cells Grown in Tissue Culture

Cellular substrata of known molecular structure and measurable dimensions can be constructed as transferred films from Langmuir troughs or as adsorbed films. In addition, large molecules in culture media form measurable adsorbates. With the techniques of ellipsometry and surface chemistry it is possible to characterize and measure (within ± 3A) as a function of several parameters a microexudate of molecular dimensions deposited when tissue cultured cells contact certain substrata. The selective attraction of substratum and cell for microexudate has been determined, and the time course of deposition in Eagle's medium is characterized by a rapid initial accretion of material. During this period, microexudate can diffuse several cell diameters and cannot be detected in the culture medium. In Eagle's medium the cells cannot be detached from glass surfaces by versene or trypsin unless the surface of cell or substratum is coated with certain molecules. Trypsin becomes adsorbed to cell surfaces, continues to be enzymatically active on the surface, and digests protein components of microexudate and substratum. Microexudate appears to be a complex mosaic of molecules (including protein) synthesized within or on the surfaces of cells and secreted by cells or transferred from their surfaces to specific substrata. It is proposed that this mosaic plays, on the molecular level, a significant role in cell-to-cell interactions, cell locomotion and adhesion, and the selective application and spreading of cells on various surfaces.     

THE ROLE OF NITRIC OXIDE IN DIATOM ADHESION IN RELATION TO SUBSTRATUM PROPERTIES1

Adhesion of raphid diatoms to surfaces, mediated by the secretion of extracellular polymeric substances (EPS), is an important strategy for growth and survival. Diatom biofilms are also important in the context of biofouling. Diatoms exhibit selectivity in adhering to surfaces, but little is understood about how they perceive the properties of a substratum and translate that perception into altered adhesion properties. In this study, we demonstrate that Seminavis robusta Danielidis et D. G. Mann, like many other pennate diatoms, adheres more strongly to hydrophobic surfaces (such as silicone elastomer foul‐release coatings) than to hydrophilic surfaces. To explore the cellular mechanisms that may underlie this selectivity, we tested the hypothesis that diatoms may perceive a hydrophilic surface as unconducive to adhesion through a form of stress response involving nitric oxide (NO) production. Single‐cell imaging with the fluorescent indicator DAF‐FM DA (4‐amino‐5‐methylamino‐2′,7′‐difluorofluorescein diacetate), revealed NO levels that were 4‐fold higher in cells adhered to a hydrophilic surface (acid‐washed glass) compared with a hydrophobic surface (polydimethylsiloxane elastomer, PDMSE). Elevated levels of NO caused by the addition of the NO donor S‐nitroso‐N‐acetylpenicillamine (SNAP) did not affect growth, but cells showed reduced adhesion strength to both glass and PDMSE. Addition of the nitric oxide synthase inhibitor NG‐monomethyl‐l ‐arginine (NMMA) caused a small but significant increase in adhesion strength. Overall, the results suggest that NO acts as a signal of the wettability properties of substrata for Seminavis.     

Adhesion of algal cells to surfaces

This paper reports the cell–substratum interactions of planktonic (Chlorella vulgaris) and benthic (Botryococcus sudeticus) freshwater green algae with hydrophilic (glass) and hydrophobic (indium tin oxide) substrata to determine the critical parameters controlling the adhesion of algal cells to surfaces. The surface properties of the algae and substrata were quantified by measuring contact angle, electrophoretic mobility, and streaming potential. Using these data, the cell–substratum interactions were modeled using thermodynamic, DLVO, and XDLVO approaches. Finally, the rate of attachment and the strength of adhesion of the algal cells were quantified using a parallel-plate flow chamber. The results indicated that (1) acid–base interactions played a critical role in the adhesion of algae, (2) the hydrophobic alga attached at a higher density and with a higher strength of adhesion on both substrata, and (3) the XDLVO model was the most accurate in predicting the density of cells and their strength of adhesion. These results can be used to select substrata to promote/inhibit the adhesion of algal cells to surfaces.     

Effects of plant lectins on the adhesive properties of baby hamster kidney cells

We studied the effects of different lectins on the adhesive properties of baby hamster kidney (BHK) cells. The purpose of these studies was to learn more about the cell surface receptors involved in cell adhesion. Three adhesive phenomena were analyzed: 1) the adhesion of BHK cells to lectin-coated substrata; 2) the effects of lectins on the adhesion of cells to substrata coated by plasma fibronectin (pFN); and 3) the effects of lectins on the binding of pFN-coated beads to cells. Initial experiments with fluorescein-conjugated lectins indicated that concanavalin A (Con A), ricinus communis agglutinin I (RCA I), and wheat germ agglutinin (WGA) bound to BHK cells but peanut agglutinin (PNA), soybean agglutinin (SBA), and ulex europaeus agglutinin I (UEA I) dod not bind. All three of the lectins which bound to the cells promoted cell spreading on lectin substrata, and the morphology of the spread cells was similar to that observed with cells spread on pFN substrata. Protease treatment of the cells, however, was found to inhibit cell spreading on pFN substrata or WGA substrata more than on Con A substrata or RCA I substrata. In the experiment of cells with Con A or WGA inhibited cell spreading on pFN substrata, but RCA I treatment had no effect. Finally, treatment of cells with WGA inhibited binding to cells of pFN beads, but neither Con A nor RCA I affected this interaction. These results indicate that the lectins modify cellular adhesion in different ways, probably by interacting with different surface receptors. The possibility that the pFN receptor is a WGA receptor is discussed.     

Osteoblast adhesion on poly(L-lactic acid)/polystyrene demixed thin film blends: effect of nanotopography, surface chemistry, and wettability

Biomaterial surface characteristics are critical cues that regulate cell function. We produced a novel series of poly(l-lactic acid) (PLLA) and polystyrene demixed nanotopographic films to provide nonbiological cell-stimulating cues. The increase in PLLA weight fraction (phi) in blend solutions resulted in topography changes in spin-cast films from pit-dominant to island-dominant morphologies having nanoscale depth or height (3-29 nm). Lower molecular weight PLLA segregated to the top surface of demixed films, as observed by X-ray photoelectron spectroscopy and secondary ion mass spectroscopy (SIMS). For phi > or = 0.5, the topmost film layer was predominantly filled with PLLA (>96% by SIMS at 20-A depth). Nanotextured substrata stimulated osteoblastic cell adhesion to a greater degree than did flat PLLA (phi = 1), and this effect was more pronounced for nanoisland (phi = 0.7 and 0.9) relative to nanopit topographies (phi = 0.5). Demixed films having relatively lower water contact angles generally enhanced cell adhesion and spreading. Our results reveal that cell adhesion is affected by surface chemistry, topography, and wettability simultaneously and that nanotextured surfaces may be utilized in regulating cell adhesion.     

Biochemical functionalization of polymeric cell substrata can alter mechanical compliance

Biochemical functionalization of surfaces is an increasingly utilized mechanism to promote or inhibit adhesion of cells. To promote mammalian cell adhesion, one common functionalization approach is surface conjugation of adhesion peptide sequences such as Arg-Gly-Asp (RGD), a ligand of transmembrane integrin molecules. It is generally assumed that such functionalization does not alter the local mechanical properties of the functionalized surface, as is important to interpretations of macromolecular mechanotransduction in cells. Here, we examine this assumption systematically, through nanomechanical measurement of the nominal elastic modulus of polymer multilayer films of nanoscale thickness, functionalized with RGD through different processing routes. We find that the method of biochemical functionalization can significantly alter mechanical compliance of polymeric substrata such as weak polyelectrolyte multilayers (PEMs), increasingly utilized materials for such studies. In particular, immersed adsorption of intermediate functionalization reagents significantly decreases compliance of the PEMs considered herein, whereas polymer-on-polymer stamping of these same reagents does not alter compliance of weak PEMs. This finding points to the potential unintended alteration of mechanical properties via surface functionalization and also suggests functionalization methods by which chemical and mechanical properties of cell substrata can be controlled independently.     

Different titanium surfaces modulate the bone phenotype of SaOS-2 osteoblast-like cells

Commercially pure titanium implants presenting a relatively smooth, machined surface or a roughened endosseous surface show a large percentage of clinical success. Surface properties of dental implants seem to affect bone cells response. Implant topography appears to modulate cell growth and differentiation of osteoblasts affecting the bone healing around the titanium implant. The aim of the present study was to examine the effects of 1cm diameter and 1mm thick titanium disks on cellular morphology, adhesion and bone phenotypic expression of human osteoblast-like cells, SaOS-2. SaOS-2 cells were cultured on commercially 1 cm pure titanium disks with three different surface roughness: smooth (S), sandblasted (SB) and titanium plasma sprayed (TPS). Differences in the cellular morphology were found when they were grown on the three different surfaces. An uniform monolayer of cells recovered the S surface, while clusters of multilayered irregularly shaped cells were distributed on the rough SB and TPS surfaces. The adhesion of SaOS-2 cells, as measured after 3h of culture, was not affected by surface roughness. ECM components such as Collagen I (CoI), Fibronectin (FN), Vitronectin (VN) and Tenascin (TN) were secreted and organized only on the SB and TPS surfaces while they remained into the cytoplasm on the S surfaces. Osteopontin and BSP-II were largely detected on the SB and TPS surfaces, while only minimal production was observed on the S ones. These data show that titanium surface roughness affects bone differentiation of osteoblast like-cells, SaOS-2, indicating that surface properties may be able to modulate the osteoblast phenotype. These observations also suggest that the bone healing response around dental implants can be affected by surface topography.     

Resumption of locomotion byAmoeba proteus readhering to different substrata

Summary Floating heterotactic cells ofAmoeba proteus were sedimented on untreated glass surfaces and on modified substrata, differing in their wettability and surface potential. About 95% of the amoebae readhere to the glass within 12 min and recover locomotive (polytactic) morphology within 13 min. The rate of locomotion resumption does not change significantly on styrene/methyl methacrylate co-polymers with contrasting hydrophilic sulfonic group surface densities. Almost all amoebae readhere within 3 min to the positively charged surface of polylysine-coated glass, but locomotive shape is only reassumed after 20 min by 95% of them. The polytactic cells are marked flattened on polylysine and move 2 1/2 times more slowly than on the glass. Floating amoebae never readhere to negatively charged gelatin gel; up to 25% become polytactic after 20 min, but they never resume locomotion. Indifference of amoebae to substratum wettability, and their prompt reaction to the positively or negatively charged surfaces, are discussed. The polylysine and gelatin gel substrata seem suitable for the study of adhesion dependent motor functions in amoebae.     

Interaction of PC-3 cells with fibronectin adsorbed on sulfonated polystyrene surfaces

The ability of cancer cells to invade neighboring tissues is crucial for cell dissemination and tumor metastasis. It is generally assumed that cell adhesion to extracellular matrix proteins is an important stage of cancer progression. Hence, adhesion of cancer cells under in vitro conditions to proteins adsorbed on a substratum surface has been studied to provide a better understanding of cell-protein interaction mechanisms. A protein, adsorbed in an appropriate conformation on a substratum surface, creates a biologically active layer that regulates such cell functions as adhesion, spreading, proliferation and migration. In our study, we examined the interaction of PC-3 cells under in vitro conditions with fibronectin adsorbed on sulfonated polystyrene surfaces of a defined chemical composition and topography. We investigated cell adhesion to fibronectin and cell spreading. Using automatic, sequential microscopic image registration, we are the first to present observations of the dynamics of PC-3 cell spreading and the cell shape during this process. Our results show that cell adhesion and the shape of spreading cells strongly depend on the time interaction with fibronectin. The analysis of images of cytoskeletal protein distribution in the cell region near the cell-substratum interface revealed that induction of a signal cascade took place, which led to the reorganization of the cytoskeletal proteins and the activation of focal adhesion kinase (FAK).     

(Arg-Gly-Asp)n-albumin conjugates as a model substratum for integrin-mediated cell adhesion

We have prepared protein-peptide conjugates composed of bovine serum albumin (BSA) derivatized with short peptides containing the Arg-Gly-Asp (RGD) sequence derived from the adhesion site of fibronectin. The RGD-BSA conjugates were used to coat tissue culture plastic surfaces which then served as substrata in cell adhesion experiments. Our results indicate that the efficiency of adhesion to RGD-BSA-coated surfaces is highly dependent on the valency of the (RGD)n-BSA conjugates. For example, on surfaces with approximately equal amounts of RGD ligand, CHO cells adhered virtually 100% to the (RGD)n-BSA (n = 20.8) conjugate and not at all to the (RGD)n-BSA (n = 3.5) conjugate. Adhesion on (RGD)n-BSA-coated substrata and on fibronectin- or vitronectin-coated substrata was also examined in terms of the relationship between cell adhesion and the intermolecular distances of adsorbed proteins. It was observed that for substrata coated with relatively compact, symmetric molecules, such as RGD-BSA or vitronectin, adhesion dropped off sharply as intermolecular distances increased; by contrast, for fibronectin, a large asymmetric molecule, adhesion declined more gradually as intermolecular distances increased. Finally, we have examined the role of different cell-surface receptors in the process of adhesion to RGD-BSA substrata. Interestingly, competition and blocking experiments with antibodies and with soluble competing proteins suggest that it is the vitronectin receptor rather than the fibronectin receptor which mediates adhesion to RGD-BSA.     

Attachment of A-431 cells on immobilized antibodies to the EGF receptor promotes cell spreading and reorganization of the microfilament system

EGF-like sequences, inherent in a number of extracellular matrix proteins, participate in cell adhesion. It is possible that interactions of these sequences with EGF receptors (EGFR) affect actin filament organization. It was shown previously [Khrebtukova et al., 1991: Exp. Cell Res. 194:48-55] that antibodies specific to EGFR induce capping of these receptors and redistribution of cytoskeletal proteins in A-431 cells. Here we report that A-431 cells attach and spread on solid substrata coated with antibodies to EGFR, even in the absence of serum. Thus, EGFR can act as an adhesion protein and promote microfilament reorganization. Binding of the cells to the EGFR-antibody resulted in the formation of a unique cell shape characterized by numerous, actin-based filopodia radiating from the cell body, but without membrane ruffles. There was also a conspicuous circular belt of actin-containing fibers inside the cell margin, and many irregular actin aggregates in the perinuclear area. The morphologies and actin distributions in A-431 cells spread on fibronectin or laminin 2/4 were very different. On fibronectin, cells had polygonal shapes with numerous stress-fibers and thick actin-containing fibers along the cell edges. On laminin-covered substrata, the cells became fusiform and acquired broad leading lamellae with ruffles. In these cells, there were also a few bundles of filaments running the whole length of the cell body, and shorter bundles extending through the leading lamellae towards the membrane ruffles in the cell edge. These effects and those seen with immobilized EGF suggest that different ligand/receptor complexes induce specific reorganizations of the microfilament system.     

The selective value of bacterial shape.

Why do bacteria have shape? Is morphology valuable or just a trivial secondary characteristic? Why should bacteria have one shape instead of another? Three broad considerations suggest that bacterial shapes are not accidental but are biologically important: cells adopt uniform morphologies from among a wide variety of possibilities, some cells modify their shape as conditions demand, and morphology can be tracked through evolutionary lineages. All of these imply that shape is a selectable feature that aids survival. The aim of this review is to spell out the physical, environmental, and biological forces that favor different bacterial morphologies and which, therefore, contribute to natural selection. Specifically, cell shape is driven by eight general considerations: nutrient access, cell division and segregation, attachment to surfaces, passive dispersal, active motility, polar differentiation, the need to escape predators, and the advantages of cellular differentiation. Bacteria respond to these forces by performing a type of calculus, integrating over a number of environmental and behavioral factors to produce a size and shape that are optimal for the circumstances in which they live. Just as we are beginning to answer how bacteria create their shapes, it seems reasonable and essential that we expand our efforts to understand why they do so.     

The Selective Value of Bacterial Shape

Why do bacteria have shape? Is morphology valuable or just a trivial secondary characteristic? Why should bacteria have one shape instead of another? Three broad considerations suggest that bacterial shapes are not accidental but are biologically important: cells adopt uniform morphologies from among a wide variety of possibilities, some cells modify their shape as conditions demand, and morphology can be tracked through evolutionary lineages. All of these imply that shape is a selectable feature that aids survival. The aim of this review is to spell out the physical, environmental, and biological forces that favor different bacterial morphologies and which, therefore, contribute to natural selection. Specifically, cell shape is driven by eight general considerations: nutrient access, cell division and segregation, attachment to surfaces, passive dispersal, active motility, polar differentiation, the need to escape predators, and the advantages of cellular differentiation. Bacteria respond to these forces by performing a type of calculus, integrating over a number of environmental and behavioral factors to produce a size and shape that are optimal for the circumstances in which they live. Just as we are beginning to answer how bacteria create their shapes, it seems reasonable and essential that we expand our efforts to understand why they do so.     

Substrate ifluences human epidermal melanocyte attachment and sperading in vitro

Summary Previous culture systems for melanocytes have employed serum-supplemented medium and uncoated plastic dishes, prohibiting examination of possible substrate influences on cellular morphology and function. We now report, using a sensitive serum-free system and a quantitative procedure for evaluating cellular morphology, that modification of the plating surface affects human epidermal melanocyte attachment rate and subsequent morphology in vitro. Melanocytes attach and spread more rapidly on surfaces coated with fibronectin or Type I/III collagen or on surfaces previously conditioned by human keratinocytes, dermal fibroblasts, melanocytes, or melanoma cells than do melanocytes on untreated control surfaces. Type IV collagen and laminin, although minimally beneficial for cell attachment, do support a characteristics melanocyte morphology that differs from that seen either on the other coated surfaces or on uncoated plastic controls. Addition of fetal bovine serum at the time of inoculation has no appreciable effect on attachment but markedly improves cell spreading on untreated surfaces, while addition of nerve growth factor with or without serum to this system fails to affect cell attachment or spreading. Our data establish that human epidermal melanocytes are indeed capable of responding morphologically to substrate signals. The ability of several biochemically unrelated surfaces to enhance melanocyte attachment rate and spreading suggests that melanocytes have surface receptors with a variety of specificities. This work is relevant to the development of improved culture systems for melanocytes in vitro and to understanding melanocyte behavior in vivo. This work was supported by the USDA Agricultural Research Service, by a grant from Cheesebrough-Ponds, Inc., and by a Dermatology Foundation Fellowship (Dr. Yaar).