Fatigue‐Free and Bending‐Endurable Flexible Mn‐Doped Na0.5Bi0.5TiO3‐BaTiO3‐BiFeO3 Film Capacitor with an Ultrahigh Energy Storage Performance

As the rapid development of intelligent systems moves toward flexible electronics, capacitors with extraordinary flexibility and an outstanding energy storage performance will open up broad prospects for powering portable/wearable electronics and pulsed power applications. This work presents a simple one‐step process to fabricate a flexible Mn‐doped 0.97(0.93Na_0.5Bi_0.5TiO₃‐0.07BaTiO₃)‐0.03BiFeO₃ (Mn:NBT‐BT‐BFO) inorganic thin film capacitor with the assistance of a 2D fluorophlogopite mica substrate. The film element, which has a high breakdown strength, great relaxor dispersion, and the coexistence of ferroelectric and antiferroelectric phases, has a high recoverable energy storage density (W_rec ≈81.9 J cm^?3), high efficiency (η ≈64.4%), superior frequency stability (500 Hz–20 kHz), excellent antifatigue property (1 × 10⁹ cycles), and a broad operating temperature window (25–200 °C). The all‐inorganic Mn:NBT‐BT‐BFO/Pt/mica capacitor has a prominent mechanical‐bending resistance without obvious deterioration in its corresponding energy storage capability when it is subjected to a bending radius of 2 mm or repeated bending for 10³ cycles. This work is the first demonstration of an all‐inorganic flexible film capacitor and sheds light on dielectric energy storage devices for portable/wearable applications.     

Microfluidic device‐assisted etching of p‐HEMA for cell or protein patterning

The construction of biomaterials with which to limit the growth of cells or to limit the adsorption of proteins is essential for understanding biological phenomena. Here, we describe a novel method to simply and easily create thin layers of poly (2‐hydroxyethyl methacrylate) (p‐HEMA) for protein and cellular patterning via etching with ethanol and microfluidic devices. First, a cell culture surface or glass coverslip is coated with p‐HEMA. Next, a polydimethylsiloxane (PDMS) microfluidic is placed onto the p‐HEMA surface, and ethanol is aspirated through the device. The PDMS device is removed, and the p‐HEMA surface is ready for protein adsorption or cell plating. This method allows for the fabrication of 0.3 µm thin layers of p‐HEMA, which can be etched to 10 µm wide channels. Furthermore, it creates regions of differential protein adhesion, as shown by Coomassie staining and fluorescent labeling, and cell adhesion, as demonstrated by C2C12 myoblast growth. This method is simple, versatile, and allows biologists and bioengineers to manipulate regions for cell culture adhesion and growth. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:243–248, 2018     

Screening and characterization of anti‐SEB peptides using a bacterial display library and microfluidic magnetic sorting

Bacterial peptide display libraries enable the rapid and efficient selection of peptides that have high affinity and selectivity toward their targets. Using a 15‐mer random library on the outer surface of Escherichia coli (E.coli), high‐affinity peptides were selected against a staphylococcal enterotoxin B (SEB) protein after four rounds of biopanning. On‐cell screening analysis of affinity and specificity were measured by flow cytometry and directly compared to the synthetic peptide, off‐cell, using peptide‐ELISA. DNA sequencing of the positive clones after four rounds of microfluidic magnetic sorting (MMS) revealed a common consensus sequence of (S/T)CH(Y/F)W for the SEB‐binding peptides R338, R418, and R445. The consensus sequence in these bacterial display peptides has similar amino acid characteristics with SEB peptide sequences isolated from phage display. The K_d measured by peptide‐ELISA off‐cell was 2.4 nM for R418 and 3.0 nM for R445. The bacterial peptide display methodology using the semiautomated MMS resulted in the discovery of selective peptides with affinity for a food safety and defense threat. Published 2014. This article is a U.S. Government work and is in the public domain in the USA. Journal of Molecular Recognition published by John Wiley & Sons, Ltd.     

Self‐Assembly Atomic Stacking Transport Layer of 2D Layered Titania for Perovskite Solar Cells with Extended UV Stability

A novel atomic stacking transporting layer (ASTL) based on 2D atomic sheets of titania (Ti_1?δO₂) is demonstrated in organic–inorganic lead halide perovskite solar cells. The atomically thin ASTL of 2D titania, which is fabricated using a solution‐processed self‐assembly atomic layer‐by‐layer deposition technique, exhibits the unique features of high UV transparency and negligible (or very low) oxygen vacancies, making it a promising electron transporting material in the development of stable and high‐performance perovskite solar cells. In particular, the solution‐processable atomically thin ASTL of 2D titania atomic sheets shows superior inhibition of UV degradation of perovskite solar cell devices, compared to the conventional high‐temperature sintered TiO₂ counterpart, which usually causes the notorious instability of devices under UV irradiation. The discovery opens up a new dimension to utilize the 2D layered materials with a great variety of homostructrual or heterostructural atomic stacking architectures to be integrated with the fabrication of large‐area photovoltaic or optoelectronic devices based on the solution processes.     

Computational Design and Preparation of Cation‐Disordered Oxides for High‐Energy‐Density Li‐Ion Batteries

Cation‐disordered lithium‐excess metal oxides have recently emerged as a promising new class of high‐energy‐density cathode materials for Li‐ion batteries, but the exploration of disordered materials has been hampered by their vast and unexplored composition space. This study proposes a practical methodology for the identification of stable cation‐disordered rocksalts. Here, it is established that the efficient method, which makes use of special quasirandom structures, correctly predicts cation‐ordering strengths in agreement with accurate Monte‐Carlo simulations and experimental observations. By applying the approach to the composition space of ternary oxides with formula unit LiA_0.5B_0.5O₂ (A, B: transition metals), this study discovers a previously unknown cation‐disordered structure, LiCo_0.5Zr_0.5O₂, that may function as the basis for a new class of cation‐disordered cathode materials. This computational prediction is confirmed experimentally by solid‐state synthesis and subsequent characterization by powder X‐ray diffraction demonstrating the potential of the computational screening of large composition spaces for accelerating materials discovery.     

A shaken disposable bioreactor system for controlled insect cell cultivations at milliliter‐scale

While wave‐mixed and stirred bag bioreactors are common devices for rapid, safe insect cell culture‐based production at liter‐scale, orbitally shaken disposable flasks are mainly used for screening studies at milliliter‐scale. In contrast to the two aforementioned bag bioreactor types, which can be operated with standard or disposable sensors, shaker flasks have not been instrumented until recently. The combination of 250 mL disposable shake flasks with PreSens's Shake Flask Reader enables both pH and dissolved oxygen to be measured, as well as allowing characterization of oxygen mass transfer. Volumetric oxygen transfer coefficients (k_La‐values) for PreSens 250 mL disposable shake flasks, which were determined for the first time in insect cell culture medium at varying culture volumes and shaker frequencies, ranged between 4.4 and 37.9/h. Moreover, it was demonstrated that online monitoring of dissolved oxygen in shake flasks is relevant for limitation‐free growth of insect cells up to high cell densities in batch mode (1.6×10⁷ cells/mL) and for the efficient expression of an intracellular model protein.     

High‐resolution DNA melt‐curve analysis for cost‐effective mass screening of pairwise species interactions

Ecological studies of pairwise interactions are constrained by the methods available for rapid species identification of the interacting organisms. The resolution of data required to characterize species interaction networks at multiple spatio‐temporal scales can be intensive, and therefore laborious and costly to collect. We explore the utility of high‐resolution DNA melt‐curve analysis (HRM) as a rapid species identification method. An approach was developed to identify organisms at the pairwise interaction level, with particular application to cryptic species interactions that are traditionally difficult to study. Here, we selected a challenging application; to identify the presence/absence of pathogenic fungi (Sporothrix inflata, Ophiostoma nigrocarpum and Ophiostoma galeiforme) transported by bark beetle vectors (Hylastes ater and Hylurgus ligniperda). The technique was able to distinguish between different species of DNA within a single, pooled sample. In test applications, HRM was effective in the mass screening and identification of pathogenic fungal species carried by many individual bark beetle vectors (n = 455 beetles screened) across large geographic scales. For two of the fungal species, there was no difference in the frequency of association with either of their vectors, but for the third fungal species there was a shift in vector–pathogen associations across locations. This technique allows rapid, mass screening and characterization of species interactions at a fraction of the time and cost of traditional methods. It is anticipated that this method can be readily applied to explore other cryptic species interactions, or other studies requiring rapid generation of large data sets and/or high‐throughput efficiency.     

High‐throughput screening method for evaluating spatial repellency and vapour toxicity to mosquitoes

Spatial repellents are an essential tool for personal protection against mosquitoes that bite and transmit disease pathogens to humans. Current repellent screening methods, such as olfactometers and alternative choice tests, are complex systems that require a relatively large quantity of compound (mg). The present study validates a high‐throughput spatial repellent screening method using a glass tube that has the ends covered with netting, in addition to treated filters and plastic end caps. The apparatus occupies relatively little space, is easy to decontaminate, and requires small amounts of compound (μg). In a horizontal tube orientation, DEET (N,N‐diethyl‐meta‐toluamide), citronella oil and IR3535 had 1 h half repellent concentration (EC₅₀) values of 32, 32 and 298 μg/cm², respectively, against the Orlando strain of Aedes aegypti (L.) (Diptera: Culicidae). Vertical tube orientation increased EC₅₀ values by approximately two‐fold, except IR3535, which remained essentially unchanged. Transfluthrin showed concentration‐dependent spatial repellency (1 h EC₅₀ = 0.5 μg/cm²) without any knockdown, although only in vertical tubes. Transfluthrin showed 50% knockdown in 1 h at 0.5 μg/cm² and 50% mortality at 0.15 μg/cm² in horizontal tubes. In conclusion, this high‐throughput screening method is useful for assessing vapour toxicity and the spatial repellency of candidate molecules prior to semi‐field and field studies.     

50% Sn‐Based Planar Perovskite Solar Cell with Power Conversion Efficiency up to 13.6%

In the present work, a Pb‐assisted two step method is successfully proposed to fabricate high‐quality CH₃NH₃Sn_0.5Pb_0.5I₃ (MASn_0.5Pb_0.5I₃) perovskite film on the indium tin oxide (ITO) glass/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) substrate. The film shows regular crystalline grains with a flat and compact morphology as well as full coverage on the planar PEDOT:PSS substrate. Remarkably, corresponding devices ITO/PEDOT:PSS/MASn_0.5Pb_0.5I₃/C₆₀/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline/Ag are fabricated with high reproducibility, achieving a high power conversion efficiency of 13.6%, which is, to the best of knowledge, the most efficient solar cell based on Sn‐based perovskite.     

All‐Solid‐State Lithium‐Ion Microbatteries Using Silicon Nanofilm Anodes: High Performance and Memory Effect

All‐solid‐state thin film lithium batteries are promising devices to power the next generations of autonomous microsystems. Nevertheless, some industrial constraints such as the resistance to reflow soldering (260 °C) and to short‐circuiting necessitate the replacement of the lithium anode. In this study, a 2 V lithium‐ion system based on amorphous silicon nanofilm anodes (50–200 nm thick), a LiPON electrolyte, and a new lithiated titanium oxysulfide cathode Li_1.2TiO_0.5S_2.1 is prepared by sputtering. The determination of the electrochemical behavior of each active material and of whole systems with different configurations allows the highlighting of the particular behavior of the Li_xSi electrode and the understanding of its consequences on the performance of Li‐ion cells. Lithium‐ion microbatteries processed with industrial tools and embedded in microelectronic packages exhibit particularly high cycle life (?0.006% cycle^?1), ultrafast charge (80% capacity in 1 min), and tolerate both short‐circuiting and reflow soldering. Moreover, the perfect stability of the system allows the assignment of some modifications of the voltage curve and a slow and reversible capacity fade occurring in specific conditions, to the formation of Li₁₅Si₄ and to the expression of a “memory effect.” These new findings will help to optimize the design of future Li‐ion systems using nanosized silicon anodes.     

Cryopreservation of embryonic stem cell‐derived multicellular neural aggregates labeled with micron‐sized particles of iron oxide for magnetic resonance imaging

Magnetic resonance imaging (MRI) provides an effective approach to track labeled pluripotent stem cell (PSC)‐derived neural progenitor cells (NPCs) for neurological disorder treatments after cell labeling with a contrast agent, such as an iron oxide derivative. Cryopreservation of pre‐labeled neural cells, especially in three‐dimensional (3D) structure, can provide a uniform cell population and preserve the stem cell niche for the subsequent applications. In this study, the effects of cryopreservation on PSC‐derived multicellular NPC aggregates labeled with micron‐sized particles of iron oxide (MPIO) were investigated. These NPC aggregates were labeled prior to cryopreservation because labeling thawed cells can be limited by inefficient intracellular uptake, variations in labeling efficiency, and increased culture time before use, minimizing their translation to clinical settings. The results indicated that intracellular MPIO incorporation was retained after cryopreservation (70–80% labeling efficiency), and MPIO labeling had little adverse effects on cell recovery, proliferation, cytotoxicity and neural lineage commitment post‐cryopreservation. MRI analysis showed comparable detectability for the MPIO‐labeled cells before and after cryopreservation indicated by T₂ and T₂* relaxation rates. Cryopreserving MPIO‐labeled 3D multicellular NPC aggregates can be applied in in vivo cell tracking studies and lead to more rapid translation from preservation to clinical implementation. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:510–521, 2015     

Solution‐Processed Hydrogen Molybdenum Bronzes as Highly Conductive Anode Interlayers in Efficient Organic Photovoltaics

Highly efficient and stable organic photovoltaic (OPV) cells are demonstrated by incorporating solution‐processed hydrogen molybdenum bronzes as anode interlayers. The bronzes are synthesized using a sol‐gel method with the critical step being the partial oxide reduction/hydrogenation using an alcohol‐based solvent. Their composition, stoichiometry, and electronic properties strongly correlate with the annealing process to which the films are subjected after spin coating. Hydrogen molybdenum bronzes with moderate degree of reduction are found to be highly advantageous when used as anode interlayers in OPVs, as they maintain a high work function similar to the fully stoichiometric metal oxide, whereas they exhibit a high density of occupied gap states, which are beneficial for charge transport. Enhanced short‐circuit current, open‐circuit voltage and, fill factor, relative to reference devices incorporating either PEDOT‐PSS or a solution processed stoichiometric molybdenum oxide, are obtained for a variety of bulk heterojunction mixtures based on different polymeric donors and fullerene acceptors. In particular, high power conversion efficiencies are obtained in devices that employed the s‐H_xMoO_2.75 as the hole extraction layer.     

Half‐Heusler Thermoelectric Module with High Conversion Efficiency and High Power Density

Half‐Heusler (HH) compounds have shown great potential in waste heat recovery. Among them, p‐type NbFeSb and n‐type ZrNiSn based alloys have exhibited the best thermoelectric (TE) performance. However, TE devices based on NbFeSb‐based HH compounds are rarely studied. In this work, bulk volumes of p‐type (Nb_0.8Ta_0.2)_0.8Ti_0.2FeSb and n‐type Hf_0.5Zr_0.5NiSn_0.98Sb_0.02 compounds are successfully prepared with good phase purity, compositional homogeneity, and matchable TE performance. The peak zTs are higher than 1.0 at 973 K for Hf_0.5Zr_0.5NiSn_0.98Sb_0.02 and at 1200 K for (Nb_0.8Ta_0.2)_0.8Ti_0.2FeSb. Based on an optimal design by a full‐parameters 3D finite element model, a single stage TE module with 8 n‐p HH couples is assembled. A high conversion efficiency of 8.3% and high power density of 2.11 W cm^?2 are obtained when hot and cold side temperatures are 997 and 342 K, respectively. Compared to the previous TE module assembled by the same materials, the conversion efficiency is enhanced by 33%, while the power density is almost the same. Given the excellent mechanical robustness and thermal stability, matchable thermal expansion coefficient and TE properties of NbFeSb and ZrNiSn based HH alloys, this work demonstrates their great promise for power generation with both high conversion efficiency and high power density.     

High‐Performance Planar Perovskite Solar Cells Using Low Temperature,Solution–Combustion‐Based Nickel Oxide Hole Transporting Layer with Efficiency Exceeding 20%

NiO_x hole transporting layer has been extensively studied in optoelectronic devices. In this paper, the low temperature, solution–combustion‐based method is employed to prepare the NiO_x hole transporting layer. The resulting NiO_x thin films show better quality and preferable energy alignment with perovskite thin film compared to high temperature sol–gel‐processed NiO_x. With this, high‐performance perovskite solar cells are fabricated successfully with power conversion efficiency exceeding 20% using a modified two‐step prepared MA_1?yFA_yPbI_3?xCl_x perovskite. This efficiency value is among the highest values for NiO_x‐based devices. Various characterizations and analyses provide evidence of better film quality, enhanced charge transport and extraction, and suppressed charge recombination. Meanwhile, the device exhibits much better device stability compared to sol–gel‐processed NiO_x and poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)‐based devices.     

Biomimetic MXene Textures with Enhanced Light‐to‐Heat Conversion for Solar Steam Generation and Wearable Thermal Management

2D materials are of particular interest in light‐to‐heat conversion, yet challenges remain in developing a facile method to suppress their light reflection. Herein, inspired by the black scales of Bitis rhinoceros, a generalized approach via sequential thermal actuations to construct biomimetic 2D‐material nanocoatings, including Ti₃C₂T_x MXene, reduced graphene oxide (rGO), and molybdenum disulfide (MoS₂) is designed. The hierarchical MXene nanocoatings result in broadband light absorption (up to 93.2%), theoretically validated by optical modeling and simulations, and realize improved light‐to‐heat performance (equilibrium temperature of 65.4 °C under one‐sun illumination). With efficient light‐to‐heat conversion, the bioinspired MXene nanocoatings are next incorporated into solar steam‐generation devices and stretchable solar/electric dual‐heaters. The MXene steam‐generation devices require much lower solar‐thermal material loading (0.32 mg cm^?2) and still guarantee high steam‐generation performance (1.33 kg m^?2 h^?1) compared with other state‐of‐the‐art devices. Additionally, the mechanically deformed MXene structures enable the fabrication of stretchable and wearable heaters dual‐powered by sunlight and electricity, which are reversibly stretched and heated above 100 °C. This simple fabrication process with effective utilization of active materials promises its practical application value for multiple solar–thermal technologies.     

Thermally Stable All‐Polymer Solar Cells with High Tolerance on Blend Ratios

Tuning the blend composition is an essential step to optimize the power conversion efficiency (PCE) of organic bulk heterojunction (BHJ) solar cells. PCEs from devices of unoptimized donor:acceptor (D:A) weight ratio are generally significantly lower than optimized devices. Here, two high‐performance organic nonfullerene BHJ blends PBDB‐T:ITIC and PBDB‐T:N2200 are adopted to investigate the effect of blend ratio on device performance. It is found that the PCEs of polymer‐polymer (PBDB‐T:N2200) blend are more tolerant to composition changes, relative to polymer‐molecule (PBDB‐T:ITIC) devices. In both systems, short‐circuit current density (J_sc) is tracked closely with PCE, indicating that exciton dissociation and transport strongly influence PCEs. With dilute acceptor concentrations, polymer‐polymer blends maintain high electron mobility relative to the polymer‐molecule blends, which explains the dramatic difference in PCEs between them as a function of D:A blend ratio. In addition, polymer‐polymer solar cells, especially at high D:A blend ratio, are stable (less than 5% relative loss) over 70 d under continuous heating at 80 °C in a glovebox without encapsulation. This work demonstrates that all‐polymer solar cells show advantage in operational lifetime under thermal stress and blend‐ratio resilience, which indicates their high potential for designing of stable and scalable solar cells.     

Ultra‐High Voltage Multijunction Organic Solar Cells for Low‐Power Electronic Applications

Low power electronics are an ideal application for organic photovoltaics (OPV) where a low‐cost OPV device can be integrated directly with a battery to provide a constant power source. We demonstrate ultra‐high voltage small molecule multijunction devices with open circuit voltage (V_OC) values of up to 7V. Optical modelling is employed to aid the optimisation of the complex multi‐layer stacks and ensure current balancing is achieved between sub‐cells, and optimised multijunction devices show power conversion efficiencies of up to 3.4% which is a modest increase over the single junction devices. Sub‐cell donor/acceptor pairs of boron subphthalocyanine chloride (SubPc)/fullerene (C₆₀) and SubPc/Cl₆‐SubPc were selected both for their high V_OC in order to minimise the required number of junctions, but also for their absorption overlap to reduce the spectral dependence of the device performance. As a result, the devices are shown to directly charge a micro‐energy cell type battery under both low illumination intensity white light and monochromatic illumination.     

2‐Picoline‐borane: A non‐toxic reducing agent for oligosaccharide labeling by reductive amination

Analysis of N‐glycans is often performed by LC coupled to fluorescence detection. The N‐glycans are usually labeled by reductive amination with a fluorophore containing a primary amine to allow fluorescence detection. Moreover, many of the commonly applied labels also allow improved mass spectrometric detection of oligosaccharides. For reductive amination, the amine group of the label reacts with the reducing‐end aldehyde group of the oligosaccharide to form a Schiff base, which is reduced to a secondary amine. Here, we propose the use of 2‐picoline‐borane as the reducing agent, as a non‐toxic alternative to the extensively used, but toxic sodium cyanoborohydride. Using dextran oligosaccharides and plasma N‐glycans, we demonstrate similar labeling efficacies for 2‐picoline‐borane and sodium cyanoborohydride. Therefore, 2‐picoline‐borane is a non‐toxic alternative to sodium cyanoborohydride for the labeling of oligosaccharides.     

Quantitative Morphology–Performance Correlations in Organic Solar Cells: Insights from Soft X‐Ray Scattering

Organic/polymer semiconductors provide unique possibilities and flexibility in tailoring their optoelectronic properties to match specific application demands. One of the key factors contributing to the rapid and continuous progress of organic photovoltaics (OPVs) is the control and optimization of photoactive‐layer morphology. The impact of morphology on photovoltaic parameters has been widely observed. However, the highly complex and multilength‐scale morphology often formed in efficient OPV devices consisting of compositionally similar components impose obstacles to conventional morphological characterizations. In contrast, due to the high compositional and orientational sensitivity, resonant soft X‐ray scattering (R‐SoXS), and related techniques lead to tremendous progress of characterization and comprehension regarding the complex mesoscale morphology in OPVs. R‐SoXS is capable of quantifying the domain characteristics, and polarized soft X‐ray scattering (P‐SoXS) provides quantitative information on orientational ordering. These morphological parameters strongly correlate the fill factor (FF), open‐circuit voltage (V_oc), as well as short‐circuit current (J_sc) in a wider range of OPV devices, including recent record‐efficiency polymer:fullerene solar cells and 12%‐efficiency fullerene‐free OPVs. This progress report will delineate the soft X‐ray scattering methodology and its future challenges to characterize and understand functional organic materials and provide a non‐exhaustive overview of R‐SoXS characterization and its implication to date.     

Synthesis and Characterization of High‐Energy,High‐Power Spinel‐Layered Composite Cathode Materials for Lithium‐Ion Batteries

Spinel‐layered composites, where a high‐voltage spinel is incorporated in a layered lithium‐rich (Li‐rich) cathode material with a nominal composition x{0.6Li₂MnO₃ · 0.4[LiCo_0.333Mn_0.333Ni_0.333]O₂} · (1 – x) Li[Ni_0.5Mn_1.5]O₄ (x = 0, 0.3, 0.5, 0.7, 1) are synthesized via a hydroxide assisted coprecipitation route to generate high‐energy, high‐power cathode materials for Li‐ion batteries. X‐ray diffraction patterns and the cyclic voltammetry investigations confirm the presence of both the parent components in the composites. The electrochemical investigations performed within a wide potential window show an increased structural stability of the spinel component when incorporated into the composite environment. All the composite materials exhibit initial discharge capacities >200 mAh g^–1. The compositions with x = 0.5 and 0.7 show excellent cycling stability among the investigated materials. Moreover, the first cycle Coulombic efficiency achieve a dramatic improvement with the incorporation of the spinel component. More notably, the composite materials with increased spinel component exhibit superior rate capability compared with the parent Li‐rich material especially together with the highest capacity retention for x = 0.5 composition, making this as the optimal high‐energy high‐power material. The mechanisms involved in the symbiotic relationship of the spinel and layered Li‐rich components in the above composites are discussed.