Redox luminescence switch based on Mn2+‐doped NaYF4:Yb,Er upconversion nanorods

An redox luminescence switch was developed for the sensing of glutathione (GSH), l ‐cysteine (Cys) or l ‐ascorbic acid (AA) based on redox reaction. The Mn²⁺‐doped NaYF₄:Yb,Er upconversion nanorods (UCNRs) with an emission peak located in the red region were synthesized. The luminescence intensity of the UCNRs could be quenched due to the Mn²⁺ could be oxidized to MnO₂ by KMnO₄. Subsequently, when the AA, GSH or Cys was added into the MnO₂ modified upconversion nanosystem, which could reduced MnO₂ to Mn²⁺ and the luminescence intensity was recovered. The concentration ranges of the nanosystem are 0.500–3.375 mM (R² = 0.99) for AA, 0.6250–11.88 mM (R² = 0.99) for GSH and 0.6250–9.375 mM (R² = 0.99) for Cys, respectively.     

Highly luminescent nitrogen‐doped carbon dots for simultaneous determination of chlortetracycline and sulfasalazine

Here, we have presented a green and facile strategy to fabricate nitrogen‐doped carbon dots (N‐CDs) and their applications for determination of chlortetracycline (CTC) and sulfasalazine (SSZ). The fluorescent N‐CDs, prepared by one‐step hydrothermal reaction of citric acid and l ‐arginine, manifested numerous excellent features containing strong blue fluorescence, good water‐solubility, narrow size distribution, and a high fluorescence quantum yield (QY) of 38.8%. Based on the fluorescence quenching effects, the as‐synthesized N‐CDs as a fluorescent nanosensor exhibited superior analytical performances for quantifying CTC and SSZ. The linear range for CTC was calculated to be from 0.85 to 20.38 μg ml^?1 with a low detection limit of 0.078 μg ml^?1. Meanwhile, the linear range for SSZ was estimated to be from 0.34 to 6.76 μg ml^?1 with a low detection limit of 0.032 μg ml^?1. Therefore, the N‐CDs hold admirable application potential for constructing a fluorescent sensor for pharmaceutical analysis.     

Rhodol‐based far‐red fluorescent probe for the detection of cysteine and homocysteine over glutathione

The simultaneous discrimination of cysteine (Cys), homocysteine (Hcy) and glutathione (GSH) is of great importance due to their roles in biology and close link to many diseases, especially via the development of a far‐red fluorescent probe that could be used for rapid, selective, and sensitive detection of all three. Herein, we report the characterization of a far‐red fluorescent probe with turn‐on fluorescence properties and visible color changes that could be used for the detection of cysteine and homocysteine over glutathione. In this study we found that the sensor could discriminate cysteine and homocysteine over glutathione within 20 min. Function of this probe was based on the conjugate addition–cyclization reaction and showed a low detection limit to cysteine and homocysteine. Upon the addition of cysteine and homocysteine, the absorption band at 592 nm rose gradually and fluorescence was detected at 645 nm. The color changed from colorless to blue and fluorescence changed from absent to strong red fluorescence, which could be differentiated by the naked eye. All these unique features make this probe particularly potentially favorable for use in cysteine/homocysteine sensing and bioimaging applications. Copyright © 2016 John Wiley & Sons, Ltd.     

A ratiometric fluorescent chemosensor for the detection of cysteine in aqueous solution at neutral pH

A ratiometric fluorescent chemosensor 2‐(2′‐hydroxy‐3′‐formyl‐5′‐methoxyphenyl)benzothiazole ( 1 ) was developed for the detection of cysteine (Cys). In aqueous solution at neutral pH, 1 exhibited a ratiometric fluorescent response to Cys with a remarkable red‐to‐green shift in the emission wavelength. This fluorescence change was attributed to the cyclization reaction between the formyl group in 1 and the amino and sulfhydryl group in Cys in a stoichiometry of 1: 1 according to the proposed mechanism. At neutral pH, 1 displayed a significant fluorescence ratio signal enhancement with the addition of Cys. Furthermore, 1 showed good selectivity toward Cys. The detection limit and linear range were 5.6 and 0–100 μmol/L, respectively, which demonstrated that 1 could recognize relatively low concentrations of Cys and is a good candidate for applications in detecting Cys.     

L‐Cysteine capped CdTe–CdS core–shell quantum dots: preparation,characterization and immuno‐labeling of HeLa cells

Functionalized CdTe–CdS core–shell quantum dots (QDs) were synthesized in aqueous solution via water‐bathing combined hydrothermal method using L‐cysteine (L‐Cys) as a stabilizer. This method possesses both the advantages of water‐bathing and hydrothermal methods for preparing high‐quality QDs with markedly reduced synthesis time, and better stability than a lone hydrothermal method. The QDs were characterized by transmission electronic microscopy and powder X‐ray diffraction and X‐ray photoelectron spectroscopy. The CdTe–CdS QDs with core–shell structure showed both enhanced fluorescence and better photo stability than nude CdTe QDs. After conjugating with antibody rabbit anti‐CEACAM8 (CD67), the as‐prepared l ‐Cys capped CdTe–CdS QDs were successfully used as fluorescent probes for the direct immuno‐labeling and imaging of HeLa cells. It was indicated that this kind of QD would have application potential in bio‐labeling and cell imaging. Copyright © 2009 John Wiley & Sons, Ltd.     

Fabrication of nitrogen‐ and phosphorous‐doped carbon dots by the pyrolysis method for iodide and iron(III) sensing

A facile and novel strategy to synthesize nitrogen‐ and phosphorous‐doped carbon dots (NPCDs) by single step pyrolysis method is described here. Citric acid is used as carbon source and di‐ammonium hydrogen phosphate is used as both nitrogen and phosphorous sources, respectively. Through the extensive study on optical properties, morphology and chemical structures of the synthesized NPCDs, it is found that as‐synthesized NPCDs exhibited good excitation‐dependent luminescence property, spherical morphology and high stability. The obtained NPCDs are stable in aqueous medium and possess a quantum yield of 10.58%. In this work, a new assay method is developed to detect iodide ions using the synthesized NPCDs. Here, the inner filter effect is applied to detect the iodide ion and exhibited a wide linear response concentration range (10–60 μM) with a limit of detection (LOD) of 0.32 μM. Furthermore, the synthesized NPCDs are used for the selective detection of iron(III) (Fe³⁺) ions and cell imaging. Fe³⁺ ions sensing assay shows a detection range from 0.2 to 30 μM with a LOD of 72 nM. As an efficient photoluminescence sensor, the developed NPCDs have an excellent biocompatibility and low cytotoxicity, allowing Fe³⁺ ion detection in HeLa cells.     

A new Schiff base as a turn‐off fluorescent sensor for Cu2+ and its photophysical properties

A new Schiff base receptor 1 was synthesized and its photophysical properties were investigated by absorption, emission and excitation techniques. Furthermore, its chromogenic and fluorogenic sensing abilities towards various metal ions were examined. Receptor 1 selectively detects Cu²⁺ ion through fluorescence quenching and detection was not inhibited in the presence of other metal ions. From fluorescence titration, the limit of detection of receptor 1 as a fluorescent ‘turn‐off’ sensor for the analysis of Cu²⁺ was estimated to be 0.35 μM.     

Deposition of CdS,CdS/ZnSe and CdS/ZnSe/ZnS shells around CdSeTe alloyed core quantum dots: effects on optical properties

In this work, we synthesized water‐soluble L ‐cysteine‐capped alloyed CdSeTe core quantum dots (QDs) and investigated the structural and optical properties of deposition of each of CdS, CdS/ZnSe and CdS/ZnSe/ZnS shell layers. Photophysical results showed that the overcoating of a CdS shell around the alloyed CdSeTe core [quantum yield (QY) = 8.4%] resulted in effective confinement of the radiative exciton with an improved QY value of 93.5%. Subsequent deposition of a ZnSe shell around the CdSeTe/CdS surface decreased the QY value to 24.7%, but an increase in the QY value of up to 49.5% was observed when a ZnS shell was overcoated around the CdSeTe/CdS/ZnSe surface. QDs with shell layers showed improved stability relative to the core. Data obtained from time‐resolved fluorescence measurements provided useful insight into variations in the photophysical properties of the QDs upon the formation of each shell layer. Our study suggests that the formation of CdSeTe/CdS core/shell QDs meets the requirements of quality QDs in terms of high photoluminescence QY and stability, hence further deposition of additional shells are not necessary in improving the optical properties of the core/shell QDs. Copyright © 2015 John Wiley & Sons, Ltd.     

Chemiluminescence of copper nanoclusters and its application for trihexyphenidyl hydrochloride detection

Chemiluminescence (CL) of copper nanoclusters (CuNCs) induced by cerium (IV) (Ce(IV)) or potassium permanganate (KMnO₄) in acidic medium was observed. The potential application of CuNCs CL in analytical chemistry was also demonstrated using trihexyphenidyl hydrochloride (THP) as an example based on its enhancing CL intensity for the CuNCs–Ce(IV)/KMnO₄ systems. The excited state of the CuNCs acted as a luminophore in the CuNCs–Ce(IV) system, while CuNCs played the role of reductant in the CuNCs–KMnO₄ system. The increased CL intensity for Ce(IV)–CuNCs system was proportional to the THP concentrations in the range of 0.1 to 10.0 μM. The detection limit was 49.0 nM and the relative standard deviation was 2.2% for 2.0 μM THP (n = 11). The proposed method was applied to detect THP in pharmaceutical formulations and human plasma samples.     

Bovine serum albumin‐confined silver nanoclusters as fluorometric probe for detection of biothiols

Fluorescent bovine serum albumin‐confined silver nanoclusters (BSA–AgNCs) were demonstrated to be a novel and environmentally friendly probe for the rapid detection of biothiols such as cysteine (Cys), homocysteine (Hcy) and glutathione (GSH). The sensing was ascribed to the strong affinity between the mercapto group of the biothiols and the silver nanoclusters. The fluorescence intensity of BSA–AgNCs was quenched efficiently on increasing the concentration of biothiol, corresponding with a red‐shift in emission wavelength. However, the fluorescence of the silver nanoclusters was almost unchanged in the presence of other α‐amino acids at 10‐fold higher concentrations. By virtue of this specific response, a new, simple and rapid fluorescent method for detecting biothiols has been developed. The linear ranges for Cys, Hcy and GSH were 2.0 × 10^‐6 to 9.0 × 10^‐5 M (R² = 0.994), 2.0 × 10^‐6 to 1.2 × 10^‐4 M (R² = 0.996) and 1.0 × 10^‐5 to 8.0 × 10^‐5 M (R² = 0.980), respectively. The detection limits were 8.1 × 10^‐7 M for Cys, 1.0 × 10^‐6 M for Hcy and 1.1 × 10^‐6 M for GSH. Our proposed method was successfully applied to the determination of thiols in human plasma and the recovery was 94.83–105.24%. It is potentially applicable to protein‐stabilized silver nanoclusters in a chemical or biochemical sensing system. Copyright © 2014 John Wiley & Sons, Ltd.     

The determination of low-molecular-mass thiols with 4-(hydroxymercuric)benzoic acid as a tag using HPLC coupled online with UV/HCOOH-induced cold vapor generation AFS

An alternative analytical method was established for simultaneous determination of main urinary low-molecular-mass (LMM) thiols including cysteine (Cys), cysteinylglycine (Cys–Gly), homocysteine (HCys), γ-glutamyl cysteine (γ-Glu–Cys) and glutathione (GSH) as well as N-acetylcysteine (NAC) using RPLC coupled on line with UV/HCOOH-induced cold vapor generation atomic fluorescence spectrometry (UV/HCOOH–CVG–AFS) with 4-(hydroxymercuric)benzoic acid (PHMB) as a tag. The LMM thiols were stabilized and labeled by PHMB allowing the determination of reduced form thiols (R-thiols) and total thiols (T-thiols) without and with Tris-(2-carboxyethyl)-phosphine reduction. UV/HCOOH-induced Hg cold vapor generation was used instead of K₂SO₈–KBH₄/NaOH–HCl and/or KBrO₃/KBr–KBH₄/NaOH–HCl systems as an effective interface between RPLC and CVG–AFS. The limits of detection (3σ) of RPLC–(UV/HCOOH)–CVG–AFS with PHMB labeling for Cys, HCys, Cys–Gly, γ-Glu–Cys and GSH as well as NAC were 4.6, 5.9, 5.9, 8.1, 7.3 and 5.9 nM with the RSD of 4.4, 5.1, 3.6, 7.5 4.2 and 3.7% (n = 6 at 2 μM), respectively, satisfying the simultaneous determination of the main urinary LMM thiols. This developed method was applied successfully to determine the LMM R-thiols and T-thiols in 10 urine samples contributed by 10 healthy volunteers.     

Rapid and visual detection of berberine hydrochloride based on a water‐soluble pyrene derivative

In this study, a rapid method for the detection of berberine hydrochloride (BRH) was developed based on a water‐soluble pyrenyl probe, 8‐hydroxypyrene‐1,3,6‐trisulfonic acid (HPTS). This method features low cost, good selectivity, high sensitivity and a fast response. The sensing mechanism of this probe is attributed to the formation of a complex between HPTS and BRH induced by electrostatic interaction and π–π stacking. To the best of our knowledge, this is the first fluorescent sensor for BRH based on organic materials that has low cost and a visual response. The detection limit of this method was as low as 1.24 μM and the linear response range is 2–50 μM. This method also allowed rapid detection of BRH real samples.     

Selective recognition of homocysteine and cysteine based on new ruthenium(II) complexes

A series of the new ruthenium(II) complexes with different number of aldehyde groups have been synthesized and characterized for the simple and selective sensing of homocysteine (Hcy) and cysteine (Cys). The reaction of these ruthenium(II) complexes with Hcy and Cys afforded thiazinane or thiazolidine derivatives which resulted in the obvious changes in the UV-visible spectra and strong enhancement of the luminescence intensity of the system. The luminescence enhancement of [Ru(dmb)₂(L2)]²⁺ (dmb: 4,4′-dimethyl-2,2′-bipyridine) showed a good linearity in the concentration of 4.2-350 μM and 6-385 μM with the detection limits of 0.3 μM and 1 μM for Hcy and Cys, respectively. The absorption and emission bands from metal-to-ligand charge transfer transition in the visible region and the large Stokes shift of the ruthenium(II) complex chromophore made it suitable for biological applications.     

Glutathione‐stabilized Cu nanocluster‐based fluorescent probe for sensitive and selective detection of Hg2+ in water

In this paper, an innovative and facile one‐pot method for synthesizing water‐soluble and stable fluorescent Cu nanoclusters (CuNCs), in which glutathione (GSH) served as protecting ligand and ascorbic acid (AA) as reducing agent was reported. The resultant CuNCs emitted blue‐green fluorescence at 440 nm, with a quantum yield (QD) of about 3.08%. In addition, the prepared CuNCs exhibited excellent properties such as good water solubility, photostability and high stability toward high ionic strength. On the basis of the selective quenching of Hg²⁺ on CuNCs fluorescence, which may be the result of Hg²⁺ ion‐induced aggregation of the CuNCs, the CuNCs was used for the selective and sensitive determination of Hg²⁺ in aqueous solution. The proposed analytical strategy permitted detection of Hg²⁺ in a linear range of 4 × 10^?8 to 6 × 10^?5 M, with a detection limit of 2.2 × 10^?8 M. Eventually, the practicability of this sensing approach was confirmed by its successful application to assay Hg²⁺ in tap water, Lotus lake water and river water samples with the quantitative spike recoveries ranging from 96.9% to 105.4%.     

Potent Inhibitory Effects of Some Phenolic Acids on Lactoperoxidase

Lactoperoxidase (LPO) plays a key role in immune response against pathogens. In this study, we examined the effects of some phenolic acids on LPO. For this purpose, bovine milk LPO was purified 380.85‐fold with a specific activity of 26.66 EU/mg and overall yield of 73.33% by using Amberlite CG‐50 H⁺ resin and CNBr‐activated Sepharose‐4B‐l ‐tyrosine‐sulfanilamide affinity chromatography. After purification, the in vitro effects of phenolic acids (tannic acid, 3,4‐dihydroxybenzoic acid, 3,5‐ dihydroxybenzoic acid, chlorogenic acid, sinapic acid, 4‐hydroxybenzoic acid, vanillic acid, salicylic acid, and 3‐hydroxybenzoic acid) were investigated on LPO. These phenolic acids showed potent inhibitory effect on LPO. K_i values for these phenolic acids were found as 0.0129 nM, 0.132 μM, 0.225 μM, 0.286 μM, 0.333 μM, 2.33 μM, 10.82 μM, 0.076 mM, and 0.405 mM, respectively. Sinapic acid and 4‐hydroxybenzoic acid exhibited noncompetitive inhibition; 3,4‐dihydroxybenzoic acid showed uncompetitive inhibition, and other phenolic acids showed competitive inhibition.     

Histidine-capped copper nanoclusters for in situ amplified fluorescence monitoring of doxycycline through inner filter effect

There is a significant need to accurately measure doxycycline concentrations in view of the adverse effects of an overdose on human health. A fluorescence (FL) detection method was adopted and copper nanoclusters (CuNCs) were synthesized using chemical reduction technology. Based on FL quenching with doxycycline, the prepared CuNCs were used to explore a fluorescent nanoprobe for doxycycline detection. In an optimal sensing environment, this FL nanosensor was sensitive and selective in doxycycline sensing and displayed a linear relationship in the range 0.5–200 μM with a detection limit of 0.092 μΜ. A characterization test demonstrated that CuNCs offered active functional groups for identifying doxycycline using electrostatic interaction and hydrogen bonds. Static quenching and the inner filter effect (IFE) resulted in weakness in the FL of His@CuNCs with doxycycline with great efficiency. This suggested nanosensor was revealed to be a functional model for simple and rapid detection of doxycycline in real samples with very pleasing accuracy.     

Copper nanocluster‐based fluorescence enhanced determination of d‐penicillamine

Taking advantage of the compelling properties of d ‐penicillamine (d ‐PA) combined with copper, a method for the sensitive and selective determination of d ‐PA was established using copper nanocluster (Cu NC)‐based fluorescence enhancement. d ‐PA molecules containing a thiol compound showed a strong tendency to combine with the surface of Cu NCs, causing the re‐dispersion of nanoclusters and therefore fluorescence intensity was enhanced. Fluorescence enhancement efficiency of Cu NCs induced by d ‐PA was linear, with the d ‐PA concentration varying from 0.6–30 μg ml^?1 (R² = 0.9952) and with a detection limit of 0.54 μg ml^?1. d ‐PA content in human urine samples was detected with recoveries of 104.8–112.99%. Fluorescence‐enhanced determination of d ‐PA using Cu NCs was established for the first time and this rapid, easy and sensitive method should attract much attention for this application.     

Inhibiting the color formation by gradient temperature‐elevating Maillard reaction of soybean peptide‐xylose system based on interaction of l‐cysteine and Amadori compounds

Light color and savory flavor enhancer are attractive for consumers and food producers. The effect of addition time of l ‐cysteine on inhibiting color formation was investigated in soybean peptide‐xylose system, and the possible pathway was explored. Once dicarbonyl compounds were formed during the Maillard reaction, the addition of l ‐cysteine had no color‐inhibiting effect; if l ‐cysteine was added immediately after the Amadori compound was formed, the extraordinary color‐inhibiting effect was observed. Therefore, an improved way to inhibit color formation was proposed on the basis of the interaction of l ‐cysteine and Amadori compounds by controlling the addition time of l ‐cysteine through gradient temperature‐elevating Maillard reaction. The system was heated at 80 °C for 60 min to form Amadori compounds, followed by the addition of L‐cysteine, and the temperature was raised to 120 °C and held for 110 min. Compared with traditional products, the lightest color product was found desirable by GC/MS analysis and sensory evaluation. The novel method proposed can be a guide for the industrial preparation of light‐colored products. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Cysteine inhibits amyloid fibrillation of lysozyme and directs the formation of small worm‐like aggregates through non‐covalent interactions

In this article, we discuss the effects of amino acids on amyloid aggregation of lysozyme. l ‐cysteine (Cys) dramatically inhibited fibrillation of lysozyme, whereas other amino acids (including l ‐arginine) did not. In the presence of Cys, the aggregation pathway of lysozyme shifted from fibrillation to the formation of the small worm‐like aggregates with unfolding. The interaction between Cys and lysozyme was observed to be non‐covalent, suggesting that the thiophilic interaction between the thiol group on the side chain of Cys and the core sequence of lysozyme significantly contributes to the inhibition of amyloid aggregation. These findings provide a new basis for the design of a biocompatible additive to prevent amyloid fibrillation. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:470–478, 2014     

Inhibitory Kinetics of Azachalcones and their Oximes on Mushroom Tyrosinase: A Facile Solid‐state Synthesis

A solid‐state‐based mechanochemical process was used to synthesize novel azachalcones and their oximes as tyrosinase inhibitors. Their inhibitory activities on mushroom tyrosinase using l ‐3,4‐dihydroxyphenylalanine as a substrate were investigated. Two of the novel oxime derivatives synthesized were seen to be more potent than the positive control, kojic acid. Both the compounds 1b and 2b inhibited the diphenolase activity of tyrosinase in a dose‐dependent manner with their IC₅₀ values of 15.3 and 12.7 μm , respectively. The kinetic analysis showed that their inhibition mechanism was reversible. Both the novel oxime compounds displayed competitive inhibition with their K_i values of 5.1 and 2.5 μm , respectively. This method minimizes waste disposal problems and provides a simple, efficient, and benign method for the synthesis of novel tyrosinase inhibitors for use as skin‐whitening agents or as anti‐browning food additives.