DNase I-induced DNA conformation. 2 A structure of a DNase I-octamer complex.

The structure of a complex between DNase I and d(GCGATCGC)2 has been solved by molecular replacement and refined to an R-factor of 0.174 for all data between 6 and 2 A resolution. The nicked octamer duplexes have lost a dinucleotide from the 3' ends of one strand and are hydrogen-bonded across a 2-fold axis to form a quasi-continuous double helix of 14 base-pairs. DNase I is bound in the minor groove of the B-type DNA duplex forming contacts in and along both sides of the minor groove extending over a total of six base-pairs. As a consequence of binding of DNase I to the DNA-substrate the minor groove opens by about 3 A and the duplex bends towards the major groove by about 20 degrees. Apart from these more global distortions the bound duplex also shows significant deviations in local geometry. A major cause for the observed perturbations in the DNA conformation seems to be the stacking type interaction of a tyrosine ring (Y76) with a deoxyribose. In contrast, the enzyme structure is nearly unchanged compared to free DNase I (0.49 A root-mean-square deviations for main-chain atoms) thus providing a rigid framework to which the DNA substrate has to adapt on binding. These results confirm the hypothesis that groove width and stiffness are major factors determining the global sequence dependence of the enzyme's cutting rates. The nicked octamer present in the crystals did not allow us to draw detailed conclusions about the catalytic mechanism but confirmed the location of the active site near H134 on top of the central beta-sheets. A second cut of the DNA induced by diffusion of Mn2+ into the crystals may suggest the presence of a secondary active site in DNase I.     

DNase I-tRNA interaction

Deoxyribonuclease I (DNase I) binds right-handed DNA duplex via a minor groove and the backbone phosphate group with no contact to the major groove. It hydrolyses double-stranded DNA predominantly by a single-stranded nicking mechanism under physiological conditions, in the presence of divalent Mg and Ca cations. Even though DNase-RNA interaction was observed, less is known about the protein-RNA binding mode and the effect of such complexation on both protein and RNA conformations. The aim of this study was to examine the effects of DNase I-tRNA interaction on tRNA and protein conformations. The interaction of DNase I with tRNA is monitored under physiological conditions, in the absence of Mg2+, using constant DNA concentration of 12.5 mM (phosphate) and various protein contents (10 microM to 250 microM). FTIR, UV-visible, and CD spectroscopic methods were used to analyze the protein binding mode, the binding constant, and the effects of polynucleotide-enzyme interaction on both tRNA and protein conformations. Spectroscopic evidence showed major DNase-PO2 and minor groove interactions with overall binding constant of K = 2.1 (+/-0.7) x 10(4) M(-1). The DNase I-tRNA interaction alters protein secondary structure with major reduction of the alpha-helix, and increases the random coil, beta-anti and turn structures, while tRNA remains in the A-conformation. No digestion of tRNA by DNase I was observed in the protein-tRNA complexes.     

The crystal structure of the octamer [r(guauaca)dC]2 with six Watson-Crick base-pairs and two 3' overhang residues

The crystal structure of an alternating RNA octamer, r(guauaca)dC (RNA bases are in lower case while the only DNA base is in upper case), with two 3' overhang residues one of them a terminal deoxycytosine and the other a ribose adenine, has been determined at 2.2 A resolution. The refined structure has an Rwork 18.6% and Rfree 26.8%. There are two independent duplexes (molecules I and II) in the asymmetric unit cell, a = 24.95, b = 45.25 and c = 73.67 A, with space group P2(1)2(1)2(1). Instead of forming a blunt end duplex with two a+.c mispairs and six Watson-Crick base-pairs, the strands in the duplex slide towards the 3' direction forming a two-base overhang (radC) and a six Watson-Crick base-paired duplex. The duplexes are bent (molecule I, 20 degrees; molecule II, 25 degrees) and stack head-to-head to form a right-handed superhelix. The overhang residues are looped out and the penultimate adenines of the two residues at the top end (A15) are anti and at the bottom (A7) end are syn. The syn adenine bases form minor groove A*(G.C) base triples with C8-H...N2 hydrogen bonds. The anti adenine in molecule II also forms a triple and a different C2-H...N3 hydrogen bond, while the other anti adenine in molecule I does not, it stacks on the looped out overhang base dC. The 3' terminal deoxycytosines form two stacked hemiprotonated trans d(C.C)+ base-pairs and the pseudo dyad related molecules form four consecutive deoxyribose and ribose zipper hydrogen bonds in the minor groove.     

DNase I - DNA interaction alters DNA and protein conformations.

Human DNase I is an endonuclease that catalyzes the hydrolysis of double-stranded DNA predominantly by a single-stranded nicking mechanism under physiological conditions in the presence of divalent Mg and Ca cations. It binds to the minor groove and the backbone phosphate group and has no contact with the major groove of the right-handed DNA duplex. The aim of this study was to examine the effects of DNase I - DNA complexation on DNA and protein conformations.We monitored the interaction of DNA with DNase I under physiological conditions in the absence of Mg2+, with a constant DNA concentration (12.5 mmol/L; phosphate) and various protein concentrations (10-250 micromol/L). We used Fourier transfrom infrared, UV-visible, and circular dichroism spectroscopic methods to determine the protein binding mode, binding constant, and effects of polynucleotide-enzyme interactions on both DNA and protein conformations. Structural analyses showed major DNase-PO2 binding and minor groove interaction, with an overall binding constant, K, of 5.7 x 10(5) +/- 0.78 x 10(5) (mol/L)-1. We found that the DNase I - DNA interaction altered protein secondary structure, with a major reduction in alpha helix and an increase in beta sheet and random structures, and that a partial B-to-A DNA conformational change occurred. No DNA digestion was observed upon protein-DNA complexation.     

Atomic-resolution crystal structures of B-DNA reveal specific influences of divalent metal ions on conformation and packing.

Crystal structures of B-form DNA have provided insights into the global and local conformational properties of the double helix, the solvent environment, drug binding and DNA packing. For example, structures of the duplex with sequence CGCGAATTCGCG, the Dickerson-Drew dodecamer (DDD), established a unique geometry of the central A-tract and a hydration spine in the minor groove. However, our knowledge of the various interaction modes between metal ions and DNA is very limited and almost no information exists concerning the origins of the different effects on DNA conformation and packing exerted by individual metal ions.Crystallization of the DDD duplex in the presence of Mg(2+)and Ca(2+)yields different crystal forms. The structures of the new Ca(2+)-form and isomorphous structures of oligonucleotides with sequences GGCGAATTCGCG and GCGAATTCGCG were determined at a maximum resolution of 1.3 A. These and the 1.1 A structure of the DDD Mg(2+)-form have revealed the most detailed picture yet of the ionic environment of B-DNA. In the Mg(2+)and Ca(2+)-forms, duplexes in the crystal lattice are surrounded by 13 magnesium and 11 calcium ions, respectively.Mg(2+)and Ca(2+)generate different DNA crystal lattices and stabilize different end-to-end overlaps and lateral contacts between duplexes, thus using different strategies for reducing the effective repeat length of the helix to ten base-pairs. Mg(2+)crystals allow the two outermost base-pairs at either end to interact laterally via minor groove H-bonds, turning the 12-mer into an effective 10-mer. Ca(2+)crystals, in contrast, unpair the outermost base-pair at each end, converting the helix into a 10-mer that can stack along its axis. This reduction of a 12-mer into a functional 10-mer is followed no matter what the detailed nature of the 5'-end of the chain: C-G-C-G-A-ellipsis, G-G-C-G-A-ellipsis, or a truncated G-C-G-A-ellipsis Rather than merely mediating close contacts between phosphate groups, ions are at the origin of many well-known features of the DDD duplex structure. A Mg(2+)coordinates in the major groove, contributing to kinking of the duplex at one end. While Ca(2+)resides in the minor groove, coordinating to bases via its hydration shell, two magnesium ions are located at the periphery of the minor groove, bridging phosphate groups from opposite strands and contracting the groove at one border of the A-tract.     

DNA recognition by DNase I

Bovine pancreatic DNase I shows a strong preference for double-stranded substrates and cleaves DNA with strongly varying cutting rates suggesting that the enzyme recognises sequence-dependent structural variations of the DNA double helix. The complicated cleavage pattern indicates that several local as well as global helix parameters influences the cutting frequency of DNase I at a given bond. The high resolution crystal structures of two DNase I-DNA complexes showed that the enzyme binds tightly in the minor groove, and to the sugar-phosphate backbones of both strands, and thereby induces a widening of the minor groove and a bending towards the major grooves. In agreement with biochemical data this suggests that flexibility and minor groove geometry are major parameters determining the cutting rate of DNase I. Experimental observations showing that the sequence environmental of a dinucleotide step strongly affects its cleavage efficiency can be rationalized by that fact that six base pair are in contact with the enzyme. Mutational analysis based on the structural results has identified critical residues for DNA binding and cleavage and has lead to a proposal for the catalytic mechanism.     

The conformational variability of an adenosine.inosine base-pair in a synthetic DNA dodecamer.

A crystal structure analysis of the synthetic deoxydodecamer d(CGCAAATTIGCG) which contains two adenosine.inosine (A.I) mispairs has revealed that, in this sequence, the A.I base-pairs adopt a A(anti).I(syn) configuration. The refinement converged at R = 0.158 for 2004 reflections with F greater than or equal to 2 sigma(F) in the range 7.0-2.5A for a model consisting of the DNA duplex and 71 water molecules. A notable feature of the structure is the presence of an almost complete spine of hydration spanning the minor groove of the whole of the (AAATTI)2 core region of the duplex. pH-dependent ultraviolet melting studies have suggested that the base-pair observed in the crystal structure is, in fact, a protonated AH+ (anti).I(syn) species and that the A.I base-pairs in the sequence studied display the same conformational variability as A.G mispairs in the sequence d(CGCAAATTGGCG). The AH+(anti).I(syn) base-pair predominates below pH 6.5 and an A(anti).I(anti) mispair is the major species present between pH 6.5 and 8.0. The protonated base-pairs are held together by two hydrogen bonds one between N6(A) and O6(I) and the other between N1(A) and N7(I). This second hydrogen bond is a direct result of the protonation of the N1 of adenosine. The ultraviolet melting studies indicate that the A(anti).I(anti) base-pair is more stable than the A(anti).G(anti) base-pair but that the AH+(anti).I(syn) base pair is less stable than its AH+(anti).G(syn) analogue. Possible reasons for this observation are discussed.     

Molecular structure of the B-DNA dodecamer d(CGCAAATTTGCG)2. An examination of propeller twist and minor-groove water structure at 2.2 A resolution.

The crystal structure of the dodecanucleotide duplex d(CGCAAATTTGCG)2 has been solved to 2.2 A resolution and refined to an R-factor of 18.1% with the inclusion of 71 water molecules. The structure shows propeller twists of up to -20 degrees for the A.T base-pairs, although there is probably only one (weak) three-centre hydrogen bond in the six base-pair AT narrow minor-groove region. An extensive ribbon of hydration has been located in this groove that has features distinctive from the classic "spine of hydration". Solvation around phosphate groups is described, with several instances of water molecules bridging between phosphates.     

DNA structure and polymerase fidelity.

The accuracy of DNA replication results from both the intrinsic DNA polymerase fidelity and the DNA sequence. Although the recent structural studies on polymerases have brought new insights on polymerase fidelity, the role of DNA sequence and structure is less well understood. Here, the analysis of the crystal structures of hotspots for polymerase slippage including (CA)n and (A)n tracts in different intermolecular contexts reveals that, in the B-form, these sequences share common structural alterations which may explain the high rate of replication errors. In particular, a two-faced "Janus-like" structure with shifted base-pairs in the major groove but an apparent normal geometry in the minor groove constitutes a molecular decoy specifically suitable to mislead the polymerases. A model of the rat polymerase beta bound to this structure suggests that an altered conformation of the nascent template-primer duplex can interfere with correct nucleotide incorporation by affecting the geometry of the active site and breaking the rules of base-pairing, while at the same time escaping enzymatic mechanisms of error discrimination which scan for the correct geometry of the minor groove.In contrast, by showing that the A-form greatly attenuates the sequence-dependent structural alterations in hotspots, this study suggests that the A-conformation of the nascent template-primer duplex at the vicinity of the polymerase active site will contribute to fidelity. The A-form may play the role of a structural buffer which preserves the correct geometry of the active site for all sequences. The detailed comparison of the conformation of the nascent template-primer duplex in the available crystal structures of DNA polymerase-DNA complexes shows that polymerase beta, the least accurate enzyme, is unique in binding to a B-DNA duplex even close to its active site. This model leads to several predictions which are discussed in the light of published experimental data.     

The role of lysine 55 in determining the specificity of the purine repressor for its operators through minor groove interactions.

The interaction of the dimeric Escherichia coli purine repressor (PurR) with its cognate sequences leads to a 45 degrees to 50 degrees kink at a central CpG base step towards the major groove, as dyad-related leucine side-chains interdigitate between these bases from the minor groove. The resulting broadening of the minor groove increases the accessibility of the six central base-pairs towards minor groove interactions with residues from PurR. It has been shown that lysine 55 of PurR makes a direct contact with the adenine base (Ade8) directly 5' to the central CpG base-pair step in the high-affinity purF operator sequence. We have investigated the importance of this interaction in the specificity and affinity of wild-type PurR (WT) for its operators and we have studied a mutant of PurR in which Lys55 is replaced with alanine (K55A). Complexes of WT and K55A with duplex DNA containing pur operator sequences varied at position 8 were investigated crystallographically, and binding studies were performed using fluorescence anisotropy. The structures of the protein-DNA complexes reveal a relatively unperturbed global conformation regardless of the identity of the base-pair at position 8 or residue 55. In all structures the combination of higher resolution and a palindromic purF operator site allowed several new PurR.DNA interactions to be observed, including contacts by Thr15, Thr16 and His20. The side-chain of Lys55 makes productive, though varying, interactions with the adenine, thymine or cytosine base at position 8 that result in equilibrium dissociation constants of 2.6 nM, 10 nM and 35 nM, respectively. However, the bulk of the lysine side-chain apparently blocks high-affinity binding of operators with guanine at position 8 (Kd620 nM). Also, the high-affinity binding conformation appears blocked, as crystals of WT bound to DNA with guanine at position 8 could not be grown. In complexes containing K55A, the alanine side-chain is too far removed to engage in van der Waals interactions with the operator, and, with the loss of the general electrostatic interaction between the phosphate backbone and the ammonium group of lysine, K55A binds each operator weakly. However, the mutation leads to a swap of specificity of PurR for the base at position 8, with K55A exhibiting a twofold preference for guanine over adenine. In addition to defining the role of Lys55 in PurR minor groove binding, these studies provide structural insight into the minor groove binding specificities of other LacI/GalR family members that have either alanine (e.g. LacI, GalR, CcpA) or a basic residue (e.g. RafR, ScrR, RbtR) at the comparable position.     

Structure of the B-DNA decamer C-C-A-A-C-G-T-T-G-G and comparison with isomorphous decamers C-C-A-A-G-A-T-T-G-G and C-C-A-G-G-C-C-T-G-G

The crystal structure of the DNA decamer C-C-A-A-C-G-T-T-G-G has been solved to a resolution of 1.4 A, and is compared with the 1.3 A structure of C-C-A-A-G-A-T-T-G-G and the 1.6 A structure of C-C-A-G-G-C-C-T-G-G. All three decamers crystallize isomorphously in space group C2 with five base-pairs per asymmetric unit, and with decamer double helices stacked atop one another along the c axis in a manner that closely approximates a continuous B helix. This efficient stacking probably accounts for the high resolution of the crystal data. Comparison of the three decamers reveals the following. (1) Minor groove width is more variable than heretofore realized. Regions of A.T base-pairs tend to be narrower than average, although two successive A.T base-pairs alone may not be sufficient to produce narrowing. The minor groove is wider in regions where BII phosphate conformations are opposed diagonally across the groove. (2) Narrow regions of minor groove exhibit a zig-zag spine of hydration, as was first seen in C-G-C-G-A-A-T-T-C-G-C-G, whereas wide regions show two ribbons of water molecules down the walls, connecting base edge N or O with sugar O-4' atoms. Regions of intermediate groove width may accommodate neither pattern of hydration well, and may exhibit a less regular pattern of hydration. (3) Base-pair stacking is virtually identical at equivalent positions in the three decamers. The unconnected step from the top of one decamer helix to the bottom of the next helix is a normal helix step in all respects, except for the absence of connecting phosphate groups. (4) BII phosphate conformation require the unstacking of the two bases linked by the phosphate, but do not necessarily follow as an inevitable consequence of unstacking. They have an influence on minor groove width as noted in point (1) above. (5) Sugar ring pseudorotation P and main-chain torsion angle delta show an excellent correlation as given by the equation: delta = 40 degrees cos (P + 144 degrees) + 120 degrees. Although centered around C-2'-endo, the conformations in these B-DNA helices are distributed broadly from C-3'-exo to O-4'-endo, unlike the tighter clustering around C-3'-endo observed in A-DNA oligomer structures.     

Demethylation of thymine residues affects DNA cleavage by endonucleases but not sequence recognition by drugs.

The 5-methyl group of thymidine residues protrudes into the major groove of double helical DNA. The structural influence of this exocyclic substituent has been examined using a PCR-made 160 bp fragment in which thymidine residues were replaced with uridine residues. We show that the dT-->dU substitution and the consequent deletion of the methyl group affects the cleavage of DNA by deoxyribonuclease I and micrococcal nuclease. Analysis of the DNase I cleavage sites, in terms of di and trinucleotides, indicates that homopolymeric tracts of d(AT) become significantly more susceptible to DNase I cleavage when uridine is substituted for thymidine residues. The results indicate that removal of the thymidine methyl groups from the major groove at AT tracts induces structural perturbations that transmit into the opposite minor groove, where they can be detected by endonuclease probing. In contrast, DNase I footprinting experiments with different mono and bis-intercalating drugs reveal that dT-->dU substitution does not markedly affect sequence-specific drug-DNA recognition in the minor or major groove of the double helix. The consequences of demethylation of thymidine residues are discussed in terms of changes in the minor groove width connected to variations in the flexibility of DNA and the intrinsic curvature associated with AT tracts. The study identifies the methyl group of thymine as an important molecular determinant controlling the width of the minor groove and/or the flexibility of the DNA.     

How Proteins Recognize the TATA Box

The crystal structure of a complex of human TATA-binding protein with TATA-sequence DNA has been solved, complementing earlier TBP/DNA analyses fromSaccharomyces cerevisiaeandArabidopsis thaliana. Special insight into TATA box specificity is provided by considering the TBP/DNA complex, not as a protein molecule with bound DNA, but as a DNA duplex with a particularly large minor groove ligand. This point of view provides explanations for: (1) why T·A base-pairs are required rather than C·G; (2) why an alternation of T and A bases is needed; (3) how TBP recognizes the upstream and downstream ends of the TATA box in order to bind properly; and (4) why the second half of the TATA box can be more variable than the first.     

Interactions of DNA binding ligands with PNA-DNA hybrids.

The interactions of two representative mixed-sequence (one with an AT-stretch) PNA-DNA duplexes (10 or 15 base-pairs) and a PNA2/DNA triplex with the DNA binding reagents distamycin A, 4',6-diamidino-2-phenylindole (DAPI), ethidium bromide, 8-methoxy-psoralen and the delta and lambda enantiomers of Ru(phen)2-dppz2+ have been investigated using optical spectroscopic methods. The behaviour of these reagents versus two PNA-PNA duplexes has also been investigated. With triple helical poly(dA)/(H-T10-Lys-NH2)2 no significant intercalative binding was detected for any of the DNA intercalators, whereas DAPI, a DNA minor groove binder, was found to exhibit a circular dichroism with a positive sign and amplitude consistent with minor groove binding. Similarly, a PNA-DNA duplex containing a central AATA motif, a typical minor groove binding site for the DNA minor groove binders distamycin A and DAPI, showed binding for both of these drugs, though with strongly reduced affinity. No important interactions were found for any of the ligands with a PNA-DNA duplex consisting of a ten base-pair mixed purine-pyrimidine sequence with only two AT base-pairs in the centre. Nor did any of the ligands show any detectable binding to the PNA-PNA duplexes (one containing an AATT motif). Various PNA derivatives with extentions of the backbone, believed to increase the flexibility of the duplex to opening of an intercalation slot, were tested for intercalation of ethidium bromide or 8-methoxypsoralen into the mixed sequence PNA-DNA duplex, however, without any observation of improved binding. The importance of the ionic contribution of the deoxyribose phosphate backbone, versus interactions with the nucleobases, for drug binding to DNA is discussed in the light of these findings.     

Changes in drug 13C NMR chemical shifts as a tool for monitoring interactions with DNA

The antibiotic drug, netropsin, was complexed with the DNA oligonucleotide duplex [d(GGTATACC)]2 to monitor drug 13C NMR chemical shifts changes. The binding mode of netropsin to the minor groove of DNA is well-known, and served as a good model for evaluating the relative sensitivity of 13C chemical shifts to hydrogen bonding. Large downfield shifts were observed for four resonances of carbons that neighbor sites which are known to form hydrogen bond interactions with the DNA minor groove. Many of the remaining resonances of netropsin exhibit shielding or relatively smaller deshielding changes. Based on the model system presented here, large deshielding NMR shift changes of a ligand upon macromolecule binding can likely be attributed to hydrogen bond formation at nearby sites.     

Transcription of the his3 gene region in Saccharomyces cerevisiae

The dodecamer d(CpGpCpGpApApTpTpCpGpCpG) or C-G-C-G-A-A-T-T-C-G-C-G crystallizes as slightly more than one full turn of right-handed B-DNA. It is surrounded in the crystal by one bound spermine molecule and 72 ordered water molecules, most of which associate with polar N and O atoms at the exposed edges of base-pairs. Hydration within the major groove is principally confined to a monolayer of water molecules associated with exposed N and O groups on the bases, with most association being monodentate. Waters hydrating backbone phosphate oxygens tend not to be ordered, except where they are immobilized by 5-methyl groups from nearby thymines. In contrast, the minor groove is hydrated in an extensive and regular manner, with a zigzag “spine” of first- and second-shell hydration along the floor of the groove serving as a foundation for less-regular outer shells extending beyond the radius of the phosphate backbone. This spine network bridges purine N-3 and pyrimidine O-2 atoms in adjacent base-pairs. It is particularly regular in the A-A-T-T center, and is disrupted at the C-G-C-G ends, in part by the presence of the N-2 amino groups on guanine residues. The minor groove hydration spine may be responsible for the stability of the B form of polymers containing only A · T and I · C base-pairs, and its disruption may explain the ease of transition to the A form of polymers with G · C pairs.     

Solution structure of [d(GGTATACC)]2: wrinkled D structure of the TATA moiety

Phase-sensitive two-dimensional nuclear Overhauser effect spectra of [d(GGTATACC)]2 in aqueous deuterium oxide solution at four mixing times were quantified to give all nonoverlapping cross-peak intensities. A structural model for [d(GGTATACC)]2 was built in which the GG- and -CC moieties were in the B-DNA form, while the middle -TATA- moiety was in the wrinkled-D form (BDB model). This model was subjected to energy refinement by molecular mechanics calculations with the program AMBER. Counterions (Na+) were added to neutralize the charges, and water molecules were placed bridging across the minor groove. A complete relaxation matrix analysis was used to calculate two-dimensional nuclear Overhauser effect spectra of [d(GGTATACC)]2 from the above models (before and after energy refinement) and from four other [d(GGTATACC)]2 structural models: regular A, crystalline A, regular B, and energy-minimized B. Among them, the energy-minimized BDB model yielded a set of theoretical spectra that gave the best fit to the experimental spectra. It was also the energetically most stable. Therefore, it is a good representation of the ensemble- and time-averaged structure of the octamer in solution. This model has backbone torsion angles similar to those of B-form DNA in the GG- and -CC moieties and torsion angles similar to those of wrinkled D form DNA in the -TATA- moiety. The base stacking and base pairing are not interrupted at the junctions between the two structural moieties. Its minor groove is narrower than that of B DNA, and the solvent-accessible surface of the minor groove forms a closed hydration tunnel in the middle -TATA- segment.     

Deoxyribonuclease I footprinting reveals different DNA binding modes of bifunctional platinum complexes

Deoxyribonuclease I (DNase I) footprinting methodology was used to analyze oligodeoxyribonucleotide duplexes containing unique and single, site-specific adducts of trinuclear bifunctional platinum compound, [{trans-PtCl(NH3)2}2 mu-trans-Pt(NH3)2{H2N(CH2)6NH2}2]4+ (BBR3464) and the results were compared with DNase I footprints of some adducts of conventional mononuclear cis-diamminedichloroplatinum(II) (cisplatin). These examinations took into account the fact that the local conformation of the DNA at the sites of the contacts of DNase I with DNA phosphates, such as the minor groove width and depth, sequence-dependent flexibility and bendability of the double helix, are important determinants of sequence-dependent binding to and cutting of DNA by DNase I. It was shown that various conformational perturbations induced by platinum binding in the major groove translated into the minor groove, allowing their detection by DNase I probing. The results also demonstrate the very high sensitivity of DNase I to DNA conformational alterations induced by platinum complexes so that the platinum adducts which induce specific local conformational alterations in DNA are differently recognized by DNase I.     

Crystal structure of the chromodomain helicase DNA-binding protein 1 (Chd1) DNA-binding domain in complex with DNA

Chromatin remodelers are ATP-dependent machines that dynamically alter the chromatin packaging of eukaryotic genomes by assembling, sliding, and displacing nucleosomes. The Chd1 chromatin remodeler possesses a C-terminal DNA-binding domain that is required for efficient nucleosome sliding and believed to be essential for sensing the length of DNA flanking the nucleosome core. The structure of the Chd1 DNA-binding domain was recently shown to consist of a SANT and SLIDE domain, analogous to the DNA-binding domain of the ISWI family, yet the details of how Chd1 recognized DNA were not known. Here we present the crystal structure of the Saccharomyces cerevisiae Chd1 DNA-binding domain in complex with a DNA duplex. The bound DNA duplex is straight, consistent with the preference exhibited by the Chd1 DNA-binding domain for extranucleosomal DNA. Comparison of this structure with the recently solved ISW1a DNA-binding domain bound to DNA reveals that DNA lays across each protein at a distinct angle, yet contacts similar surfaces on the SANT and SLIDE domains. In contrast to the minor groove binding seen for Isw1 and predicted for Chd1, the SLIDE domain of the Chd1 DNA-binding domain contacts the DNA major groove. The majority of direct contacts with the phosphate backbone occur only on one DNA strand, suggesting that Chd1 may not strongly discriminate between major and minor grooves.