Langmuir-Blodgett monolayer films of the Rhodopseudomonas viridis reaction center: determination of the order of the hemes in the cytochrome c subunit.

The Langmuir-Blodgett (LB) film technique has been applied to produce oriented and photo-active films of isolated reaction center cytochrome c complexes (RC-cyt c) and chromatophore membranes from the photosynthetic bacterium Rhodopseudomonas viridis. Linear dichroism (LD) and redox potentiometry have been used to identify the four cytochrome c hemes of the RC-cyt c complex. Resolved angular orientations of the four hemes in LB films of both isolated RC-cyt-c complexes and of chromatophore membranes permit the reduction of the 24 possible arrangements to two. Additional structural and functional information from other sources allows us to propose a model which best accounts for all the available experimental data.     

Fabrication and structural characterization of the Langmuir–Blodgett films from a new chitosan derivative containing cinnamate chromophores

A new amphiphilic chitosan derivative, octanoylchitosan cinnamate (OCC) was synthesized through regioselective modifications of chitosan. A solution of OCC was spread to water to form a stable monolayer at the air/water interface. The surface pressure (π)–area (A) isotherm indicated that the polymer had a limiting area of about 100 Å² per repeat unit. YZ-type multilayers were deposited onto hydrophobic substrates through Langmuir–Blodgett (LB) technique. The structural features of the LB films were investigated by UV absorption, circular dichroism (CD) and linear dichroism (LD) spectroscopy. The results showed that the intrinsic chirality originating from the helical order of the OCC backbones was maintained in the LB films. Besides, the polymer backbones were uni-axially oriented in the LB film. The ordered structures of OCC assembled in a dilute solution and in a cast film were also investigated and the results were compared with that of the LB film.     

Langmuir and Langmuir-Blodgett films of organophosphorus acid anhydrolase

In this paper, we describe the preparation and characterization of Langmuir and Langmuir-Blodgett (LB) monolayers of the enzyme organophosphorus acid anhydrolase (OPAA). Langmuir films of OPAA were characterized on different subphases, such as phosphate, ammonium carbonate, and bis-tris-propane buffers. Monolayers at the air-water interface were characterized by measuring the surface pressure and surface potential-area isotherms. In situ UV-vis absorption spectra were also recorded from the Langmuir monolayers. The enzyme activity at the air-water interface was tested by the addition of diisopropylfluorophosphate (DFP) to the subphase. LB films of OPAA were transferred to mica substrates to be studied by atomic force microscopy. Finally, a one-layer LB film of OPAA labeled with a fluorescent probe, fluorescein isothiocyanate (FITC), was deposited onto a quartz slide to be tested as sensor for DFP. The clear, pronounced response and the stability of the LB film as a DFP sensor show the potential of this system as a biosensor.     

Bioelectronic device consisting of cytochrome c/poly-L-aspartic acid adsorbed hetero-Langmuir-Blodgett films

A bioelectronic device consisting of protein-adsorbed hetero-Langmuir-Blodgett (LB) films was investigated. Four kinds of functional molecules, cytochrome c, viologen, flavin, and ferrocene, were used as a secondary electron acceptor (A2), a first electron acceptor (A1), a sensitizer (S), and an electron donor (D), respectively. To fabricate the cytochrome c adsorbed hetero-LB film, poly-L-aspartic acid was used as the bridging molecule. The hetero-LB film was fabricated by subsequently depositing ferrocene, flavin, and viologen onto the pretreated ITO glass. Cytochrome c-adsorbed hetero-LB films were prepared by the adsorption of cytochrome c onto the poly-L-aspartic acid treated-LB films by intermolecular electrostatic attraction. Finally, the MIM (metal/insulator/metal) structured molecular device was constructed by depositing aluminum onto the surface of the cytochrome c-adsorbed hetero-LB films. Hetero-LB films were analyzed by Atomic Force Microscopy (AFM), and cytochrome c adsorption onto the films confirmed. The photoswitching function was achieved and the photoinduced unidirectional flow was in accordance with the rectifying characteristics of the molecular device. The direction of energy flow was in accordance with the energy level profile across molecular films. Based on the measurement of the transient photocurrent of the molecular device efficient directional flow of photocurrent through the redox potential difference was observed. The photodiode characteristics of the proposed bio-electronic device were verified and the proposed molecular array mimicking the photosynthetic reaction center could be usefully applied as a model system for the development of the bio-molecular photodiode.     

Conformation and molecular and ionic transformations of polycytidylic acid immobilized in multilayer Langmuir and polyelectrolyte films

Multilayer films of complexes of polycytidylic acid with dioctadecyldimetylammonium were obtained by the Langmuir-Blodgett method (LB films), and complexes of poly(C) with polycations (poly-L-lysisne, polyethyleneimine, polyallylamine) were obtained by the method of alternate adsorption (polyionic assembly) from solutions of oppositely charged polyelectrolytes on the solid carrier (SA films). It was shown that poly(C) exists in SA films in a single-stranded state irrespective of whether in the starting solution it occurred in the single-stranded nonprotonated or double-stranded protonated conformation. Conversely, in the LB film poly(C) preferred to be in a double protonated conformation. UV-spectra of water-insoluble LB and SA films at different pH values of surrounding water medium were investigated. Proton titration curves of poly(C) immobilized in LB films were obtained. The analysis of the shape of titration curves showed that the molecular-ionic transformation of poly(C) in LB films is accompanied by both the conformational transition of the polynucleotide and the molecular rearrangement in the whole film. Poly(C) was found to transform from the double- to single-stranded state and vice versa in the "deprotonation-protonation" cycle of LB film due to cooperative release/binding of hydrogen ions by cytosine bases. In contrast, poly(C) "protonation-deprotonation" in SA films occurred without conformational transitions of the polynucleotide. As opposed to poly(C) in solution a rather big hysteresis of forward and back titration curves was found for both types of multilayer films, indicating molecular rearrangements in films. The reason for the structural transformations of poly(C) upon fabrication of LB or SA films and the mechanism of molecular ionic transformations of poly(C) in films are discussed in terms of a simple model of ion exchange. An assumption about the nature of structural transformations of LB and SA films during their protonation-deprotonation is put forward.     

Fabrication of Large-scale Nanostructure by Langmuir-Blodgett Technique

Monolayer of polymer latex spheres was prepared at the air/water interface and deposited onto glass slides through Langmuir-Blodgett （LB） technique. Large-scale, high quality hexagonally close-packed domains were found in scanning electron microscopic pictures. Details of the monolayer-forming ability were discussed. Suitable surface characteristics of the colloidal particles, especially the hydrophilic and hydrophobic properties, are the keys for the formation of ordered monolayer films. The film can be transferred onto various kinds of substrates, even high curvature surface articles, such as fibers, decorations etc, can also be used as substrates. The advantages of this fabrication method of polymer latex spheres monolayer are fast, flexible, simple and very neat.     

Deposition behavior and photoelectrochemical characteristics of chlorophylla Langmuir-Blodgett films

The deposition behavior and photoelectric response characteristics of chlorophylla (Chla) monolayers and multilayers were investigated under various film fabrication conditions. Chla LB films were deposited onto quartz and pretreated ITO glass substrates under several fabrication conditions, including surface pressure and number of layers. The absorption spectra of Chla in a solution state and solid-like state (LB films) were fairly consistent with each other, and two absorption peaks were found at 678 and 438 nm, respectively. The prepared Chla LB films were set into an electrochemistry cell equipped with a Pt plate as the counter electrode, and the photoelectric response characteristics were obtained and analyzed relative to the light illumination. By considering the resulting photocurrents, the optimal fabrication conditions for Chla LB films were determined as 20 mN/m of surface pressure and 20 layers. The action spectrum of the Chla LB films was obtained in the visible region, and was found to be in good agreement with the absorption spectrum. The possible application of the proposed system as a constituent of an artificial color recognition device was suggested based on combining with the photoelectric conversion property of another lightsensitive biological pigment.     

Patterning of photosensitive polyimide LB film and its application in the fabrication of biomolecular microphotodiode array

Ultra thin film of photosensitive polyimide having benzene and sulfonyloxyimide moieties in the main chain was prepared using a Langmuir-Blodgett (LB) technique, and then micro array pattern of the polyimide LB film on a gold substrate was obtained by deep UV lithographic technique. In order to array cytochrome c molecules along the micro-patterned gold substrate, the well-characterized monolayer of cytochrome c was immobilized with a mixed monolayer of 11-mercaptoundecanoic acid (11-MUDA) and decanethiol. The redox activity and electron transfer between cytochrome c molecular center and gold electrode interface for the self-assembled cytochrome c monolayer were investigated by cyclic voltammetry measurement. Biomolecular photodiode consisting of cytochrome c and green fluorescent protein (GFP) onto the patterned gold substrate was fabricated by self-assembly process. The integration and morphology of cytochrome c and GFP were studied from the measurements of atomic force microscopy (AFM) and fluorescence emission. Especially, current-voltage characteristics of the protein multilayers were investigated by scanning tunneling microscopy (STM) and its application in biomolecular photodiode was also examined.     

Enzymatic activities and infrared studies of glutamate dehydrogenase immobilized on Langmuir-Blodgett films

Summary A technique is described for the immobilization of active glutamate dehydrogenase (GDH) on behenic acid Langmuir-Blodgett (LB) films. The optimization of the immobilization conditions shows that the activities of GDH bound on hydrophobic and hydrophilic LB films were similar and decreased dramatically when the immobilized enzyme was dried. The GDH binding was followed by Fourier transform infrared (FTIR) spectroscopy. Modifications of GDH conformation and LB film structure were observed during the enzyme binding. After GDH activity test, a partial dissociation of behenic acid occurred and the -sheet band of the enzyme increased by comparison with the -helix band.Abbreviations LB Langmuir-Blodgett - FTIR spectroscopy Fourier transform infrared spectroscopy - GDH glutamate dehydrogenase - TEA triethylamine     

Voltammetric studies of hemoglobin-coated polystyrene latex bead films on pyrolytic graphite electrodes

A novel hemoglobin (Hb)-coated polystyrene (PS) latex bead film was deposited on pyrolytic graphite (PG) electrode surface. In the first step, positively charged Hb molecules in pH 5.0 buffers were adsorbed on the surface of negatively charged, 500 nm diameter PS latex beads bearing sulfate groups by electrostatic interaction. The aqueous dispersion of Hb-coated PS particles was then deposited on the surface of PG electrodes and, after evaporation of the solvent, Hb-PS films were formed. The Hb-PS film electrodes exhibited a pair of well-defined, quasi-reversible cyclic voltammetric (CV) peaks at about −0.36 V vs. SCE in pH 7.0 buffers, characteristic of Hb heme Fe(III)/Fe(II) redox couples. Positions of Soret absorption band of Hb-PS films suggest that Hb retains its near-native structure in the films in its dry form and in solution at medium pH. The Hb in PS films was also acted as a catalyst to catalyze electrochemical reduction of various substrates such as trichloroacetic acid (TCA), nitrite, oxygen and hydrogen peroxide.     

Differentiating the orientations of photosynthetic reaction centers on Au electrodes linked by different bifunctional reagents

The photosynthetic reaction center (RC) composite film was fabricated by self-assembled monolayers (SAMs) on the Au electrode with two different bifunctional reagents, 4-aminothiophenol (ATP) and 2-mercaptoethylamine (MEA), respectively. The square wave voltametry (SWV), bulk electrolysis and photocurrent test were employed for characterizing the composite film. The dramatic different electrochemical characteristics were observed for the two types of films, which strongly suggested an orientational difference for RC arising from the structural difference between the two bifunctional reagents. For RC-MEA film, three redox peaks which implying electron transfer (ET) between the primary donor (P) and the bacteriopheophytin (Bphe) were observed. While for RC-ATP film, two redox peaks implying ET between the nonheme iron and the primary quinone (Q(A)) were observed. The ET behavior driven by electric field also supported the result that the RC could be linked to the electrode at different sites. The site-specific immobilization approach reported here supplies a method to differentiate the protein orientation.     

Immobilization of urease on poly(N-vinyl carbazole)/stearic acid Langmuir-Blodgett films for application to urea biosensor

Urease was immobilized in mixed monolayers of poly(N-vinyl carbazole) (PNVK) and stearic acid (SA) formed at an air-water interface. The monolayers were transferred onto indium-tin-oxide (ITO) coated glass plates using Langmuir-Blodgett (LB) film deposition technique. Urease immobilized on PNVK/SA LB films, characterized using FTIR and UV-visible spectroscopy, was found to exhibit increased stability over a wide pH (6.5-8.5) and temperature (25-50 degrees C) range. Potentiometric measurements on these urease electrodes were carried out using an ammonium ion analyzer. Two values for K(m)(app) were obtained at lower and higher concentrations of substrate urea.     

Orientation of silk III at the air-water interface.

A threefold helical crystal structure of Bombyx mori silk fibroin has been observed in films prepared from aqueous silk fibroin solutions using the Langmuir Blodgett (LB) technique. The films were studied using a combination of transmission electron microscopy and electron diffraction techniques. Films prepared at a surface pressure of 16.7 mN/m have a uniaxially oriented crystalline texture, with the helical axis oriented perpendicular to the plane of the LB film. Films obtained from the air-water interface without compression have a different orientation, with the helical axes lying roughly in the plane of the film. In both cases the d-spacings observed in electron diffraction are the same and match a threefold helical model crystal structure, silk III, described in previous publications. Differences in the relative intensities of the observed reflections in both types of oriented samples, as compared to unoriented samples, allows estimations of orientation distributions and the calculations of orientation parameters. The orientation of the fibroin chain axis in the plane of the interfacial film for uncompressed samples is consistent with the amphiphilic behavior previously postulated to drive the formation of the threefold helical silk III conformation.     

Qualitative and quantitative analysis of the secondary structure of cytochrome C Langmuir-Blodgett films

A qualitative and quantitative analysis of the conformation of Langmuir-Blodgett (LB) dried films of cytochrome C on silicon wafers was performed by Fourier transform ir (FTIR) spectroscopy. A deconvolution procedure was applied to the amide I band analysis, in order to determine the percentage of the different secondary structures. Qualitative analysis was performed by examining difference spectra. Films obtained by spreading protein solutions at pH 7.4 and 1, dried at 25 and 100°C, on silicon wafers were also examined in order to detect spectral components associated with denatured protein domains, and to compare them with cytochrome C LB films. FTIR spectroscopy showed that the following important changes characterise LB film spectra: (a) the α-helix component is higher (its percentage is 57 and 54%) than the one estimated in dried film obtained by spreading the solutions at pH 7.4 on a silicon substrate (43%), (b) there is an increase in the intensity of bands attributed to protonated carboxy group bands, involved and not involved in the formation of hydrogen bonds, and a decrease in those attributed to deprotonated carboxy groups, (c) the intensity of several bands attributed to aromatic amino acids and aliphatic chains increases, and (d) bands due to O(SINGLEBOND)H stretching vibrations of crystallization water are present. These conformational changes could be induced by protein-protein interaction caused by the close packing of molecules that occurs during LB film formation; it cannot be excluded that they may be accompanied by partial changes in the tertiary structure of the protein. A preferential orientation of protein molecules in LB films is also a possibility. © 1997 John Wiley & Sons, Inc. Biopoly 42: 227–237, 1997     

In Situ μGISAXS: II. Thaumatin Crystal Growth Kinetic

The formation of thaumatin crystals by Langmuir-Blodgett (LB) film nanotemplates was studied by the hanging-drop technique in a flow-through cell by synchrotron radiation micrograzing-incidence small-angle x-ray scattering. The kinetics of crystallization was measured directly on the interface of the LB film crystallization nanotemplate. The evolution of the micrograzing-incidence small-angle x-ray scattering patterns suggests that the increase in intensity in the Yoneda region is due to protein incorporation into the LB film. The intensity variation suggests several steps, which were modeled by system dynamics based on first-order differential equations. The kinetic data can be described by two processes that take place on the LB film, a first, fast, process, attributed to the crystal growth and its detachment from the LB film, and a second, slower process, attributed to an unordered association and conversion of protein on the LB film.     

Color image detection by biomolecular photoreceptor using bacteriorhodopsin-based complex LB films

A biomolecular photoreceptor consisting of bacteriorhodopsin (bR)-based complex Langmuir–Blodgett (LB) films was developed for color image detection. By mimicking the functions of the pigments in retina of human visual system, biomolecules with photoelectric conversion function were chosen and used as constituents for an artificial photoreceptor. bR and flavin were deposited onto the patterned (9-pixelized) ITO glass by LB technique. A 9-pixel biomolecular photoreceptor was fabricated with a sandwich-type structure of ITO/LB films/electrolyte gel/Pt. Since each functional molecule shows its own response characteristic according to the light illumination in the visible region, the simplified knowledge-based algorithm for interpretation of the incident light wavelength (color) was proposed based on the basic rule describing the relationship between the photoelectric response characteristics and the incident light wavelength. When simple color images were projected onto the photoreceptor, the primary colors in visible light region, red, green, and blue were clearly recognized, and the projected color images were fairly well reproduced onto the color monitor by the proposed photoreceptor with the knowledge-based algorithm. It is concluded that the proposed device has a capability of recognizing the color images and can be used as a model system to simulate the information processing function of the human visual system.     

Hydrogen-ion binding of polycytidylic acid immobilized between Langmuir layers of dimethyldioctadecylammonium (DODA) in thin multilayer films

The report describes the study of hydrogen-ion binding of Langmuir-Blodgett films contained with polycytidylic acid. A variety of multilayer films are analyzed and their UV absorption spectra are recorded. Poly (C) molecules established between dimethyldioctadecylammonium (DODA) layers are shown to exist in double stranded and semiprotonated form, independent of the pH value of the solution from which the films were made. A large hysteresis was found between forward and back proton titration of poly(C) immobilized in the LB films. This hysteresis points to a marked transference of both types of molecules during the film titration. This behavior also depends upon the types of molecules from which the films were made.     

PM-SP-LB多层膜中BR分子的有序定向排列

用垂直转移法在石英片上制成的PM—SP—LB多层膜的可见区吸收谱表明吸收峰峰位与成膜液一致,均在574nm左右,比PM水悬浮液的吸收峰位略有红移;稳态线二色性表明,除PM碎片平躺在多层膜平面内外,在提拉时的竖直方向存在BR的取向优势,优势率约为0.51左右;同时还表明,25mN/m条件下制备的PM—SP—LB多层膜中BR分子的视黄醛生色团的跃迁矩与膜平面法向所成的角接近于天然紫膜中的值。     

Rectified photocurrent of molecular photodiode consisting of cytochrome c/GFP hetero thin films.

Photoinduced electron transfer in the molecular electronic device consisting of protein-adsorbed hetero Langmuir–Blodgett (LB) film was investigated. Three kinds of functional molecules, cytochrome c, viologen, and green fluorescent protein (GFP) were used as an electron acceptor, a mediator, and a sensitizer, respectively. The hetero-LB film was fabricated by subsequently depositing cytochrome c and viologen onto the pretreated ITO or quartz glass. GFP adsorbed hetero-LB films were prepared by soaking the hetero-LB films into the buffer solution containing GFP. The MIM (metal/insulator/metal) structured molecular device was constructed by depositing aluminum onto the surface of the GFP-adsorbed hetero LB films. Due to the excitation by irradiation with a 460 nm monochromic light source, the photoinduced unidirectional flow of electrons in the MIM device could be achieved and was detected as photocurrents. The photoswitching function was achieved and the rectifying characteristic was observed in the molecular device. Based on the measurement of transient photocurrent of molecular device, the unidirectional flow of electrons was verified.     

Characterization of Langmuir-Blodgett films of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine and 1-palmitoyl-2-[10-(pyren-1-yl)decanoyl]-sn-glycero-3-phosphat idylcholine by FTIR-ATR

Monomolecular films of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and 1-palmitoyl-2-[10-(pyren-1-yl)decanoyl]-sn-glycero-3-phosphatidylc holine (PPDPC) were transferred from an air/water interface onto a germanium attenuated total reflection crystal by the Langmuir-Blodgett (LB) technique. The assemblies were thereafter investigated by Fourier transform infrared-attenuated total reflection (FTIR-ATR) spectroscopy. To determine the molecular organization in the deposited layers we monitored the CH2 and C = O stretching and the CH2 bending regions of the infrared spectra of these lipids in detail. Using Fourier self-deconvolution technique, the carbonyl stretching mode was resolved into two models corresponding to the conformational differences in the ester linkages of the phospholipid sn-1 and sn-2 acyl chains. By varying the temperature of the subphase and using different surface pressures, we were able to transfer different conformational states of DPPC onto a germanium ATR crystal. Deposition of DPPC at 40 mN m-1 and at 15 degrees C or at 20 mN m-1 and at 35 degrees C results in LB-assemblies in ordered or disordered states, respectively, as judged by the IR spectra. These structures in LB films correspond to the state of DPPC in liposomes below and above the temperature of the order-disorder phase transition. Irrespective of the surface pressure and subphase temperature used during the deposition, an ordering process was found in DPPC films when the number of the transferred layers was increased from one to five. The pyrene-labelled phosphatidylcholine analogue, PPDPC, behaved differently from DPPC. In the case where one to three layers of PPDPC transferred at 35 mN m-1 and at 20 degrees C only conformational structures resembling those in fully hydrated liposomes above the main transition temperature were observed.