Luminescent sensor for Cd2+, Hg2+ and Ag+ in water based on a sulphur‐containing receptor: quantitative binding–softness relationship

A water‐soluble, high‐output fluorescent sensor, based on a lumazine ligand with a thiophene substituent for Cd²⁺, Hg²⁺ and Ag⁺ metal ions, is reported. The sensor displays fluorescence enhancement upon Cd²⁺ binding (log  β = 2.79 ± 0.08) and fluorescence quenching by chelating with Ag⁺ and Hg²⁺ (log β = 4.31 ± 0.15 and 5.42 ± 0.1, respectively). The mechanism of quenching is static and occurs by formation of a ground‐state non‐fluorescent complex followed by rapid intersystem crossing. The value of the Stern–Volmer quenching rate constant (k_q) by Ag⁺ ions is close to 6.71 × 10¹² mol/L/s at 298 K. The thermodynamic parameters (ΔG, ΔH and ΔS) were also evaluated and indicated that the complexation process is spontaneous, exothermic and entropically favourable. The quantitative linear relationship between the softness values of Klopman (σ_K) or Ahrland (σ_A) and the experimental binding constants (β) being in the order of Hg²⁺ > Ag⁺ > Cd²⁺ suggests that soft–soft interactions are the key for the observed sensitivity and selectivity in the presence of other metal ions, such as: Pb²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Co²⁺, Zn²⁺ and Mg²⁺ ions. Copyright © 2008 John Wiley & Sons, Ltd.     

Study of fluorescence quenching of mercaptosuccinic acid‐capped CdS quantum dots in the presence of some heavy metal ions and its application to Hg(II) ion determination

In this study, CdS quantum dots (QDs) capped with mercaptosuccinic acid (MSA) were prepared in one step. The size, shape, component and spectral properties of MSA‐capped CdS QDs were characterized by transmission electron microscopy (TEM), photoluminescence (PL) and infrared (IR) spectrometry. The results showed that the prepared QDs with an average diameter of 6 nm have favorable fluorescence, which is greatly influenced by the pH of the environment. The interaction of some heavy metal ions including Ag⁺, Hg²⁺, Cu²⁺, Ni²⁺ and Co²⁺ with MSA‐capped CdS QDs was investigated in different buffering pH media. Based on the fluorescence quenching of the QDs in the presence of each of the metal ions, the feasibility of their determinations was examined according to the Stern–Volmer equation. The investigations showed that Hg(II) ions can be determined in the presence of many co‐existing metal ions at a buffering pH of 5. This method was satisfactorily applied to the measurement of Hg(II) ions in some environmental samples. Copyright © 2014 John Wiley & Sons, Ltd.     

A selective determination of copper ions in water samples based on the fluorescence quenching of thiol‐capped CdTe quantum dots

CdTe quantum dots (QDs) capped with different stabilizers, i.e. thioglycolic acid (TGA), 3‐mercaptopropionic acid (MPA) and glutathione (GSH) were investigated as fluorescent probes for the determination of Cu²⁺. The stabilizer was shown to play an important role in both the sensitivity and selectivity for the determination of Cu²⁺. TGA‐capped CdTe QDs showed the highest sensitivity, followed by the MPA and GSH‐capped CdTe QDs, respectively. The TGA‐ and MPA‐capped CdTe QDs were not selective for Cu²⁺ that was affected by Ag⁺. The GSH‐capped CdTe QDs were insensitive to Ag⁺ and were used to determine Cu²⁺ in water samples. Under optimal conditions, quenching of the fluorescence intensity (F₀/F) increased linearly with the concentration of Cu²⁺ over a range of 0.10–4.0 µg/mL and the detection limit was 0.06 µg/mL. The developed method was successfully applied to the determination of Cu²⁺ in water samples. Good recoveries of 93–104%, with a relative standard deviation of < 6% demonstrated that the developed simple method was accurate and reliable. The quenching mechanisms were also described. Copyright © 2015 John Wiley & Sons, Ltd.     

A highly selective and simple fluorescent sensor for mercury (II) ion detection based on cysteamine‐capped CdTe quantum dots synthesized by the reflux method

Cysteamine (CA)‐capped CdTe quantum dots (QDs) (CA–CdTe QDs) were prepared by the reflux method and utilized as an efficient nano‐sized fluorescent sensor to detect mercury (II) ions (Hg²⁺). Under optimum conditions, the fluorescence quenching effect of CA–CdTe QDs was linear at Hg²⁺ concentrations in the range of 6.0–450 nmol/L. The detection limit was calculated to be 4.0 nmol/L according to the 3σ IUPAC criteria. The influence of 10‐fold Pb²⁺, Cu²⁺ and Ag⁺ on the determination of Hg²⁺ was < 7% (superior to other reports based on crude QDs). Furthermore, the detection sensitivity and selectivity were much improved relative to a sensor based on the CA–CdTe QDs probe, which was prepared using a one‐pot synthetic method. This CA–CdTe QDs sensor system represents a new feasibility to improve the detection performance of a QDs sensor by changing the synthesis method. Copyright © 2014 John Wiley & Sons, Ltd.     

A novel phosphorescence sensor for Co2+ ion based on Mn‐doped ZnS quantum dots

N‐acetyl‐l ‐cysteine‐capped Mn‐doped ZnS quantum dots (QDs) were prepared by hydrothermal methods. It could emit phosphorescence at 583 nm with the excitation wavelength at 315 nm. The phosphorescence intensity of QDs could be quenched dramatically by increasing the concentration of Co²⁺ ion. The novel phosphorescence sensor based on N‐acetyl‐l ‐cysteine‐capped QDs was developed for detecting Co²⁺ ion with a linear dynamic range of 1.25 × 10^–6–3.25 × 10^–5 m . The limit of detection and RSD were 6.0 × 10^–8 m and 2.3%, respectively. Interference experiments showed excellent selectivity over numerous cations such as alkali, alkaline earth and transitional metal ions. The possible quenching mechanism was also examined by phosphorescence decays. The proposed phosphorescence method was further applied to the trace determination of Co²⁺ ion in tap and pond water samples with recoveries of 97.75–103.32%. Copyright © 2013 John Wiley & Sons, Ltd.     

Metal dependent hydrolysis of β‐casein by sIgA antibodies from human milk

We present the first evidence that electrophoretically and immunologically homogeneous sIgAs purified from milk of healthy human mothers by chromatography on Protein A‐Sepharose and FPLC gel filtration contain intrinsically bound metal ions (Ca > Mg ≥ Al > Fe ≈ Zn ≥ Ni ≥ Cu ≥ Mn), the removal of which by a dialysis against ethylenediamine tetraacetic acid (EDTA) leads to a significant decrease in the β‐casein‐hydrolyzing activity of these antibodies (Abs). An affinity chromatography of total sIgAs on benzamidine‐Sepharose interacting with canonical serine proteases separates a small metalloprotease sIgA fraction (6.8 ± 2.4%) from the main part of these Abs with a serine protease‐like β‐casein‐hydrolyzing activity. The relative activity of this metalloprotease sIgA fraction containing intrinsically bound metal ions increases ～1.2–1.9‐fold after addition of external metal ions (Mg²⁺ > Fe²⁺ > Cu²⁺ ≥ Ca²⁺ ≥ Mn²⁺) but decreases by 85 ± 7% after the removal of the intrinsically bound metals. The metalloprotease sIgA fraction free of intrinsic metal ions demonstrates a high β‐casein‐hydrolyzing activity in the presence of individual external metal ions (Fe²⁺ > Ca²⁺ > Co²⁺ ≥ Ni²⁺) and especially several combinations of metals: Co²⁺ + Ca²⁺ < Mg²⁺ + Ca²⁺ < Ca²⁺ + Zn²⁺ < Fe²⁺ + Zn²⁺ < Fe²⁺ + Co²⁺ < Fe²⁺ + Ca²⁺. The patterns of hydrolysis of a 22‐mer oligopeptide corresponding to one of sIgA‐dependent specific cleavage sites in β‐casein depend significantly on the metal used. Metal‐dependent sIgAs demonstrate an extreme diversity in their affinity for casein‐Sepharose and chelating Sepharose, and interact with Sepharoses bearing immobilized monoclonal mouse IgGs against λ‐ and κ‐type light chains of human Abs. Possible ways of the production of metalloprotease abzymes (Abz) by human immune system are discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

A new rhodamine‐based fluorescent chemodosimeter for mercuric ions in water media

A new rhodamine–ethylenediamine–nitrothiourea conjugate (RT) was synthesized and its sensing property as a fluorescent chemodosimeter toward metal ions was explored in water media. Analytical results from absorption and fluorescence spectra revealed that the addition of Hg²⁺ ions to the aqueous solution of the chemodosimeter RT caused a distinct fluorescence OFF–ON response with a remarkable visual color change from colorless to pink; however, no clear spectral and color changes were observed from other metal ions including: Zn²⁺, Cu²⁺, Cd²⁺, Pb²⁺, Ag⁺, Fe²⁺, Cr³⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺. The sensing results and the molecular structure suggested that a Hg²⁺‐induced a desulfurization reaction and cyclic guanylation of the thiourea moiety followed by ring‐opening of the rhodamine spirolactam in RT are responsible for a distinct fluorescence turn‐on signal, indicating that RT is a remarkably sensitive and selective chemodosimeter for Hg²⁺ ions in aqueous solution. Hg²⁺ within a concentration range from 0.1 to 25 μM can be determined using RT as a chemodosimeter and a detection limit of 0.04 μM is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Water‐soluble polymeric chemosensor for selective detection of Hg2+ in aqueous solution using rhodamine‐based modified poly(acrylamide–acrylic acid)

We report the fabrication of a novel easily available turn‐on fluorescent water‐soluble polymeric chemosensor for Hg²⁺ ions that was simply prepared by micellar free radical polymerization of a water‐insoluble organic rhodamine‐based Hg²⁺‐recognizing monomer (GR6GH), with hydrophilic monomers acrylamide (AM) and acrylic acid (AA). The chemical structure of the polymeric sensor was characterized by FT‐IR and ¹H NMR spectroscopy. The apparent viscosity average molecular weight M_η of poly(acrylamide–acrylic acid) [poly(AM–NaAA)] and the water‐soluble polymeric chemosensor poly(AM–NaAA–GR6GH) were 1.76 × 10⁶ and 6.84 × 10⁴ g/mol, respectively. Because of its amphiphilic property, the water‐soluble polymeric chemosensor can be used as a chemosensor in aqueous media. Upon addition of Hg²⁺ ions to an aqueous solution of poly(AM–NaAA–GR6GH), fluorescence enhancements were observed instantly. Moreover, other metal ions did not induce obvious changes to the fluorescence spectra. This approach may provide an easily measurable and inherently sensitive method for Hg²⁺ ion detection in environmental and biological applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of hybrid SiO2‐coated CdTe nanocrystals for sensitive sensing of Cu2+ and Ag+ ions

A new ion sensor based on hybrid SiO₂‐coated CdTe nanocrystals (NCs) was prepared and applied for sensitive sensing of Cu²⁺ and Ag⁺ for the selective quenching of photoluminescence (PL) of NCs in the presence of ions. As shown by ion detection experiments conducted in pure water rather than buffer solution, PL responses of NCs were linearly proportional to concentrations of Cu²⁺ and Ag⁺ ions < 3 and 7 uM, respectively. Much lower detection limits of 42.37 nM for Cu²⁺ and 39.40 nM for Ag⁺ were also observed. In addition, the NC quenching mechanism was discussed in terms of the characterization of static and transient optical spectra. The transfer and trapping of photoinduced charges in NCs by surface energy levels of CuS and Ag₂S clusters as well as surface defects generated by the exchange of Cu²⁺ and Ag⁺ ions with Cd²⁺ ion in NCs, resulted in PL quenching and other optical spectra changes, including steady‐state absorption and transient PL spectra. It is our hope that these results will be helpful in the future preparation of new ion sensors. Copyright © 2012 John Wiley & Sons, Ltd.     

A highly efficient and selective turn‐on fluorescent sensor for Hg2+, Ag+ and Ag nanoparticles based on a coumarin dithioate derivative

Based on chelation‐enhanced fluorescence, a new fluorescent coumarin derivative probe 3(1‐(7‐hydroxy‐4‐methylcoumarin)ethylidene)hydrazinecarbodithioate for Hg²⁺, Ag⁺ and Ag nanoparticles is reported. Fluorescent probe acts as a rapid and highly selective “off–on” fluorescent probe and fluorescence enhancement by factors 5 to12 times was observed upon selective complexation with Hg²⁺, Ag⁺ and Ag nanoparticles. The molar ratio plots indicated the formation of 1:1 complexes between Hg²⁺ and Ag⁺ with the probe. The linear response range covers a concentration range 0.1 × 10^–5–1.9 × 10^–5 mol/L, 0.1 × 10^–5–2.3 × 10^–5 mol/L and 0.146 × 10^–12–2.63 × 10^–12 mol/L for Hg²⁺, Ag⁺ and Ag nanoparticles, respectively. The interference effect of some anions and cations was also tested. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel optical probe based on d‐penicillamine‐functionalized graphene quantum dots: Preparation and application as signal amplification element to minoring of ions in human biofluid

In this study, d ‐penicillamine‐functionalized graphene quantum dots (DPA‐GQD) has been synthesized, which significantly increases the fluorescence intensity of GQD. We used this simple fluorescent probe for metal ions detection in human plasma samples. Designed DPA‐GQD respond to Hg²⁺, Cu²⁺, Au²⁺, Ag⁺, Co²⁺, Zn²⁺, and Pb²⁺ with high sensitivity. The fluorescence intensity of this probe decreased significantly in the presence of metal ions such as, Hg²⁺, Cu²⁺, Au²⁺, Ag⁺, Co²⁺, Zn²⁺, and Pb²⁺. In this work, a promising probe for ions monitoring was introduced. Moreover, DPA‐GQD probe has been tested in plasma samples. The functionalized DPA‐GQDs exhibits great promise as an alternative to previous fluorescent probes for bio‐labeling, sensing, and other biomedical applications in aqueous solution.     

A highly sensitive and reversible chemosensor for Hg2+ detection based on porphyrin‐thymine conjugates

In this study, we demonstrated a highly sensitive, selective, and reversible chemosensor for Hg²⁺ determination. This chemosensor was synthesized by direct condensation of thymin‐1‐ylacetic acid with zinc tetraaminoporphyrin, which has a porphyrin core as the fluorophore and four thymine (T) moieties as the specific interaction sites for Hg²⁺. The probe (4T‐ZnP) exhibited split Soret bands with a small peak at 408 nm and a strong band at 429 nm in a dimethylformamide/H₂O (7/3, v/v) mixed solvent as well as a strong emission band at 614 nm. Upon the addition of Hg²⁺, the probe displayed strong fluorescence quenching due to the formation of T‐Hg²⁺‐T complexes. With the aid of the fluorescence spectrometer, the chemosensor in the dimethylformamide/H₂O (7/3, v/v) mixed solvent (0.3 μM) exhibited a detection limit of 6.7 nM. Interferences from other common cations, such as Co²⁺, K⁺, Sn²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Na⁺, Ca²⁺, Mg²⁺, Pb²⁺, and Cd²⁺, associated with Hg²⁺ analysis were effectively inhibited. Copyright © 2015 John Wiley & Sons, Ltd.     

H2O2‐ and pH‐sensitive CdTe quantum dots as fluorescence probes for the detection of glucose

A novel fluorescence assay system for glucose was developed with thioglycollic acid (TGA)‐capped CdTe quantum dots (QDs) as probes. The luminescence quantum yield of the TGA‐capped CdTe QDs was highly sensitive to H₂O₂ and pH. In the presence of glucose oxidase, glucose is oxidized to yield, gluconic acid and H₂O₂. H₂O₂ and H⁺ (dissociated from gluconic acid) intensively quenched the fluorescence of QDs. The experimental results showed that the quenched fluorescence was proportional to the glucose concentration within the range of 0.01–5.0 mm under optimized experimental conditions. Compared with most of the existing methods, this newly developed system possesses many advantages, including simplicity, low cost, high flexibility, and good sensitivity. Furthermore, no complicated chemical modification of QDs and enzyme immobilization was needed in this system. Copyright © 2012 John Wiley & Sons, Ltd.     

The behaviors of metal ions in the CdTe quantum dots–H2O2 chemiluminescence reaction and its sensing application

The behaviors of 15 kinds of metal ions in the thiol‐capped CdTe quantum dots (QDs)–H₂O₂ chemiluminescence (CL) reaction were investigated in detail. The results showed that Ag⁺, Cu²⁺ and Hg²⁺ could inhibit CdTe QDs and H₂O₂ CL reaction. A novel CL method for the selective determination of Ag⁺, Cu²⁺ and Hg²⁺ was developed, based on their inhibition of the reaction of CdTe QDs and H₂O₂. Under the optimal conditions, good linear relationships were realized between the CL intensity and the logarithm of concentrations of Ag⁺, Cu²⁺ and Hg²⁺. The linear ranges were from 2.0 × 10^?6 to 5.0 × 10^?8 mol L^?1 for Ag⁺, from 5.0 × 10^?6 to 7.0 × 10^?8 mol L^?1 for Cu²⁺ and from 2.0 × 10^?5 to 1.0 × 10^?7 mol L^?1 for Hg²⁺, respectively. The limits of detection (S/N = 3) were 3.0 × 10^?8, 4.0 × 10^?8 and 6.7 × 10^?8 mol L^?1 for Ag⁺, Cu²⁺ and Hg²⁺, respectively. A possible mechanism for the inhibition of CdTe QDs and H₂O₂ CL reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

BSA–AuNPs@Tb–AMP metal–organic frameworks for ratiometric fluorescence detection of DPA and Hg2+

An easy and effective strategy for synthesizing a ratiometric fluorescent nanosensor has been demonstrated in this work. Novel fluorescent BSA–AuNPs@Tb–AMP (BSA, bovine serum albumin; AMP, adenosine 5′‐monophosphate; AuNPs, Au nanoparticles) metal–organic framework (MOF) nanostructures were synthesized by encapsulating BSA–AuNPs into Tb–AMP MOFs for the detection of 2,6‐pyridinedicarboxylic acid (DPA) and Hg²⁺. DPA could strongly co‐ordinate with Tb³⁺ to replace water molecules from the Tb³⁺ center and accordingly enhanced the fluorescence of Tb–AMP MOFs. The fluorescence of BSA–AuNPs at 405 nm remained constant. While the fluorescence of BSA–AuNPs at 635 nm was quenched after Hg²⁺ was added, the fluorescence of Tb–AMP MOFs remained constant. Accordingly, a ratiometric fluorescence nanosensor was constructed for detection of DPA and Hg²⁺. The ratiometric nanosensor exhibited good selectivity to DPA over other substances. The F₅₄₅/F₄₀₅ linearly increased with increase of DPA concentration in the range of 50 nM to 10 μM with a detection limit as low as 17.4 nM. F₆₃₅/F₄₀₅ increased linearly with increase of Hg²⁺ concentration ranging from 50 nM to 1 μM with a detection limit as low as 20.9 nM. Additionally, the nanosensor could be successfully applied for the determination of DPA and Hg²⁺ in running water.     

Fluorescent probe for detection of Cu2+ using core‐shell CdTe/ZnS quantum dots

Core‐shell CdTe/ZnS quantum dots capped with 3‐mercaptopropionic acid (MPA) were successfully synthesized in aqueous medium by hydrothermal synthesis. These quantum dots have advantages compared to traditional quantum dots with limited biological applications, high toxicity and tendency to aggregate. The concentration of Cu²⁺ has a significant impact on the fluorescence intensity of quantum dots (QDs), therefore, a rapid sensitive and selective fluorescence probe has been proposed for the detection of Cu²⁺ in aqueous solution. Under optimal conditions, the fluorescence intensity of CdTe/ZnS QDs was linearly proportional to the concentration of Cu²⁺ in the range from 2.5 × 10^–9 M to 17.5 × 10^–7 M with the limit of 1.5 × 10^–9 M and relative standard deviation of 0.23%. The quenching mechanism is static quenching with recoveries of 97.30–102.75%. Copyright © 2015 John Wiley & Sons, Ltd.     

Prevention by Ce3+ of DNA destruction caused by Hg2+ in fish intestine

The interactions between Hg²⁺, Ce³⁺, and the mixuure of Ce³⁺ and Hg²⁺, and DNA from fish intestine in vitro were investigated by using absorption spectrum and fluorescence emission spectrum. The ultraviolet absorption spectra indicated that the addition of Hg²⁺, Ce³⁺, and the mixture of Ce³⁺ and Hg²⁺ to DNA generated an obviously hypochromic effect. Meanwhile, the peak of DNA at 205.2 nm blue-shifted and at 258.2 nm red-shifted. The size of the hypochromic effect and the peak shift of DNA by metal ion treatments was Hg²⁺>Hg²⁺+Ce³⁺>Ce³⁺. The fluorescence emission spectra showed that with the addition of Hg²⁺, Ce³⁺, and the mixture of Ce³⁺ and Hg²⁺ the emission peak at about 416.2 nm of DNA did not obviously change, but the intensity reduced gradually and the sequence was Hg²⁺>Hg²⁺+Ce²⁺>Ce³⁺. Hg²⁺, Ce³⁺, and the mixture of Ce³⁺ and Hg²⁺ had 1.12, 0.19, and 0.41 binding sites to DNA, respectively; the fluorescence quenching of DNA caused by the metal ions all attributed to static quenching. The binding constants (K _A ) of binding siees were 8.98×10⁴ L/mol and 1.02×10⁴ L/mol, 5.12×10⁴ L/mol and 1.10×10³ L/mol, 6.66×10⁴ L/mol and 2.36×10³ L/mol, respectively. The results showed that Ce³⁺ could relieve the destruction of Hg²⁺ on the DNA structure.     

ZnS quantum dots‐based fluorescence spectroscopic technique for the detection of quercetin

Water‐soluble ZnS quantum dots (QDs) modified by mercaptoacetic acid (MPA) were used to determinate quercetin in aqueous solutions by a fluorescence spectroscopic technique. The results showed that the fluorescence of the modified ZnS QDs could be quenched by quercetin effectively in physiological buffer solution. The optimum fluorescence intensity was found to be at incubation time 10 min, pH 7.0 and temperature 25°C. Under the optimal conditions, the detection limit of quercetin was 5.71 × 10^‐7 mol/L. Moreover, the quenching mechanism was discussed to be a static quenching procedure, which was proved by the quenching rate constant K_q (1.14 × 10¹³ L/mol/s). Copyright © 2013 John Wiley & Sons, Ltd. Copyright © 2013 John Wiley & Sons, Ltd.     

Revealing interaction between sulfobutylether‐β‐cyclodextrin and reserpine by chemiluminescence and site‐directed molecular docking

The host–guest interaction between sulfobutylether‐β‐cyclodextrin (SBE‐β‐CD) and reserpine (RSP) is described using flow injection‐chemiluminescence (FI‐CL) and site‐directed molecular docking methods. It was found that RSP could inhibit the CL intensity produced by a luminol/SBE‐β‐CD system. The decrease in CL intensity was logarithmic over an RSP concentration range of 0.03 to 700.0 nM, giving a regression equation of ?I = 107.1lgC_RES + 186.1 with a detection limit of 10 pM (3σ). The CL assay was successfully applied in the determination of RSP in injection, saliva and urine samples with recoveries in the range 93.5–106.1%. Using the proposed CL model, the binding constant (K_CD‐R) and the stoichiometric ratio of SBE‐β‐CD/RSP were calculated to be 7.4 × 10⁶ M^‐1 and 1 : 1, respectively. Using molecular docking, it was confirmed that luminol binds to the small cavity of SBE‐β‐CD with a nonpolar interaction, while RSP targeted the larger cavity of SBE‐β‐CD and formed a 1 : 1 complex with hydrogen bonds. The proposed new CL method has the potential to become a powerful tool for revealing the host–guest interaction between CDs and drugs, as well as monitoring drugs with high sensitivity. Copyright © 2013 John Wiley & Sons, Ltd.