Nucleotide sequence and analysis of pBL1, a bacteriocin-producing plasmid from Lactococcus lactis IPLA 972

The complete sequence of the 10.9-kbp bacteriocinogenic plasmid pBL1 from Lactococcus lactis subsp. lactis IPLA 972 has been determined. Thirteen ORFs were encountered, of which 5 were incomplete. pBL1 proved to be a narrow-host-range plasmid which replicates neither in Bacilus subtilis nor in Lactobacillus spp. The structural organization of the pBL1 replication region was highly similar to other well-known theta-replicating plasmids of lactococci, at both the untranslated (the replication origin) and the translated (repB and orfX) sequences. As in other plasmids, the product of orfX was not necessary for plasmid replication. However, it was shown to be involved in plasmid stability. Three genes organized in an operon-like structure encompassed, most likely, the bacteriocin-encoding region. Upstream of the origin of replication a nicking site (oriT) was found. This oriT sequence proved to be functional by mobilization of plasmids wearing it. One complete and several partial IS elements were identified on pBL1.     

Expression of the immunity protein of plantaricin 423, produced by Lactobacillus plantarum 423, and analysis of the plasmid encoding the bacteriocin

Plantaricin 423 is a class IIa bacteriocin produced by Lactobacillus plantarum isolated from sorghum beer. It has been previously determined that plantaricin 423 is encoded by a plasmid designated pPLA4, which is now completely sequenced. The plantaricin 423 operon shares high sequence similarity with the operons of coagulin, pediocin PA-1, and pediocin AcH, with small differences in the DNA sequence encoding the mature bacteriocin peptide and the immunity protein. Apart from the bacteriocin operon, no significant sequence similarity could be detected between the DNA or translated sequence of pPLA4 and the available DNA or translated sequences of the plasmids encoding pediocin AcH, pediocin PA-1, and coagulin, possibly indicating a different origin. In addition to the bacteriocin operon, sequence analysis of pPLA4 revealed the presence of two open reading frames (ORFs). ORF1 encodes a putative mobilization (Mob) protein that is homologous to the pMV158 superfamily of mobilization proteins. Highest sequence similarity occurred between this protein and the Mob protein of L. plantarum NCDO 1088. ORF2 encodes a putative replication protein that revealed low sequence similarity to replication proteins of plasmids pLME300 from Lactobacillus fermentum and pYIT356 from Lactobacillus casei. The immunity protein of plantaricin 423 contains 109 amino acids. Although plantaricin 423 shares high sequence similarity with the pediocin PA-1 operon, no cross-reactivity was recorded between the immunity proteins of plantaricin 423 and pediocin PA-1.     

Molecular Characterization of Plasmid pBM300 from Bacillus megaterium QM B1551

Strain QM B1551 of Bacillus megaterium contains seven compatible plasmids: two small rolling circle plasmids and five theta-replicating plasmids with cross-hybridizing replicons. To expand our understanding of these plasmids, the replicon region (6.7 kb) from pBM300 was cloned, sequenced, and functionally characterized. Sequence analysis showed that the replication protein (RepM300) was highly homologous to two other plasmid Rep proteins of the same strain but to no other known proteins. Furthermore, the location of the replication origin was within the RepM300 coding region, and the origin contained three 12-base direct repeats. Deletion analysis of the replicon confirmed the role of the Rep protein and showed that open reading frame 2 (ORF2) was required for stability. However, the protein encoded by ORF2 is entirely different from the replicon stability proteins encoded by the other two replicons. The entire plasmid was isolated from the plasmid array by integrating a spectinomycin resistance gene and transforming a plasmidless strain, PV361. Complete sequencing showed that pBM300 was 26,300 bp long, had a G+C content of 35.2%, and contained 20 ORFs, two of which encoded proteins that had no similarity to other proteins in the database. The proteins encoded by the plasmid ORFs had similarity to proteins for mobilization and transfer, an integrase, a rifampin resistance protein, a cell wall hydrolase, glutathione synthase, and a biotin carboxylase. The similarities were to several gram-positive genera and a few gram-negative genera and archaea. oriT and ssoT-like regions were detected near two mob genes. These results suggest that pBM300 is a mobilizable hybrid plasmid that confers increased metabolic and germination ability on its host. Its replicon also helps define a new plasmid family.     

Nucleotide sequence, structural organization and host range of pRS4, a small cryptic Pediococcus pentosaceus plasmid that contains two cassettes commonly found in other lactic acid bacteria

The complete nucleotide sequence of the cryptic plasmid pRS4 (3550 bp) from Pediococcus pentosaceus RS4 was determined. Sequence analysis revealed the presence of three open reading frames (ORFs). The putative protein coded by ORF 1 showed 93% identity with the mobilization protein of Lactobacillus casei plasmid pLC88 and 94% identity with a sequenced fragment of the mobilization protein of P. damnosus plasmid pF8801, suggesting a common origin for these three mobilization proteins. The putative protein coded by ORF 2 showed 92% identity with the replication protein of L. plantarum plasmid pWCFS101, a plasmid that replicates via the rolling circle (RC) mechanism, suggesting a similar replication mechanism for pRS4. Supporting this hypothesis, a putative double strand origin (dso) and a region with palindromic sequences that could function as single strand origin (sso), were detected in pRS4. A function could not be assigned to ORF 3. Since ORF 1 exhibits high identity with L. casei plasmid pLC88 but lower identity (58%) with other Lactobacillus plasmids, and ORF 2 exhibits high identity with the L. plantarum plasmid pWCFS101 but lower identity (55-58%) with other Lactobacillus plasmids (including pLC88), two independent cassettes, from different sources, seem to be involved in the structure of pRS4. Plasmids derived from pRS4 containing the chloramphenicol resistance gene were successfully electrotransformed in L. plantarum, L. casei, P. pentosaceus, and Pediococcus acidilactici, suggesting that pRS4 could be used as a cloning vector for lactic acid bacteria. To our knowledge pRS4 is the first RC-replicating plasmid of P. pentosaceus that has been completely sequenced and used as cloning vector.     

Complete nucleotide sequence and structural organization of pPB1, a small Lactobacillus plantarum cryptic plasmid that originated by modular exchange

A small cryptic plasmid designated pPB1 was isolated from Lactobacillus plantarum BIFI-38 and its complete 2899 bp nucleotide sequence was determined. Sequence analysis revealed four putative open reading frames. Based on sequence analysis two modules could be identified. First, the replication module consisted of a sequence coding for a replication protein (RepB) and its corresponding target site, and two putative repressor proteins (RepA and RepC). Sequence analysis indicated the possible synthesis of an antisense RNA that might regulate RepB production. A putative lagging-strand initiation site was also found, suggesting that pPB1 replicates via a rolling circle mechanism. The second module of pPB1 consisted of a sequence coding for a putative mobilization protein and its corresponding oriT site. Since the nucleotide sequence of the replication module showed 94.5% identity to the similar region on the Leuconostoc lactis plasmid pCI411, and the nucleotide sequence of the mobilization module had 97.5% identity to L. plantarum plasmid pLB4, it is concluded that pPB1 originated by modular exchange between two such plasmids by homologous recombination. Putative recombination sites where crossover might have taken place were also identified.     

pS86, A New Theta-Replicating Plasmid from Enterococcus faecalis

The complete nucleotide sequence of the small (5149 bp) and cryptic plasmid pS86 from Enterococcus faecalis ssp. faecalis S-86 has been determined. Sequence analysis revealed six putative open reading frames (ORFs) encoding polypeptides of 28.3, 11.5, 8.4, 65.1, 7.3, and 11.96 kDa each. Based on sequence similarity, two cassettes have been identified in pS86: ORF1 codes for the replication initiation protein (Rep); ORF4 codes for a putative mobilization protein that shows similarities to Mob/Pre proteins from plasmids of Gram-positive bacteria. No function could be assigned to the other putative ORFs found. According to our results, pS86 plasmid could use a theta-mode of replication, similar to the recently described theta-type replicons from pUCL287 (Tetragenococcus halophila) and pLA1 or pLA105 (Lactobacillus acidophilus) plasmids. Received: 24 November 1999 / Accepted: 26 April 2000     

Sequence analysis of pLBB1, a cryptic plasmid from Lactobacillus delbrueckii subsp. bulgaricus

The first report of the complete nucleotide sequence of a cryptic plasmid from Lactobacillus delbrueckii subsp. bulgaricus (Lactobacillus bulgaricus) is presented. The plasmid pLBB1 consists of 6127 bp with a GC content of 44.8%. No ssDNA was detected by hybridization experiments, which is consistent with the notion that pLBB1 does not replicate by a rolling circle mechanism. A putative replication region of pLBB1 was cloned and found to be functional in Lactobacillus johnsonii and Lactococcus lactis. Plasmid pLBB1 showed significant DNA sequence identity with plasmid pLL1212 from Lactobacillus delbrueckii subsp. lactis (Lactobacillus lactis) CRL1212 (GenBank accession No. AF109691). Four open reading frames (ORFs) larger than 100 amino acids were identified. ORFA shared similarity with a putative primase-helicase system, and ORFB and ORFC exhibited limited identity with a mobilization protein and a transposase, respectively. Curing experiments did not allowed us to assign a function to the ORFs.     

Sequence and genetic organization of the 19.3-kb erythromycin- and dalfopristin-resistance plasmid pLME300 from Lactobacillus fermentum ROT1

Lactobacillus fermentum ROT1 was isolated from a raw milk dairy product. It is resistant to novobiocin, tetracycline, erythromycin and dalfopristin. A chromosomal tetracycline-resistance determinant was identified as tetM. A 19,398-bp plasmid (pLME300), present in several erythromycin-resistant strains of Lb. fermentum, was isolated from strain ROT1 and completely sequenced. Based on putative open reading frames, pLME300 contains at least four different functional regions. In region I, ORF1 shows high homologies to replication proteins of different theta-replicating plasmids. In addition, a tandem repeat of a 22-bp sequence appears 4.5 times. In region II, ORF3 may code for a methylase, and ORF4 has homologies to Mrr restriction system proteins of Deinococcus radiodurans and Escherichia coli suggesting a restriction-modification system. Region III harbours antibiotic-resistance genes, coding for a macrolide-lincosamide-streptogramin B (MLS) methylase Erm(LF) and the streptogramin A acetyltransferase Vat(E), which is identical to Vat(E) from Enterococcus faecium. Furthermore, region III shows a 91% nucleotide sequence identity to an erm-vat linkage of E. faecium. Region IV carries ORFs that appear to be involved in plasmid mobilization as characterized by a putative origin of transfer and a mobilization protein. pLME300 is the largest completely sequenced multi-resistance plasmid isolated from any Lactobacillus strain so far.     

Sequence analysis of the plasmid genome of the probiotic strain Lactobacillus paracasei NFBC338 which includes the plasmids pCD01 and pCD02

Lactobacillus paracasei NFBC338 is a probiotic strain that was isolated from the human gastrointestinal tract (GIT) and contains a plasmid genome of 80kb. Using a shotgun sequencing approach, two of the plasmids, pCD01 (19,882bp) and pCD02 (8554bp) have been completely sequenced, and four contiguous sequences (Contigs) have been assembled. Bioinformatic analysis of pCD01 revealed that it contains 23 putative open reading frames (ORFs) and that it contains regions characterised by potential replication functions and multidrug resistance (MDR). In contrast, the content of pCD02 is mainly cryptic, although, it does contain two insertion sequence (IS) elements. Indeed, up to 17% of the entire plasmid genome encodes putative transposable elements. In addition, there are a number of interesting ORFs distributed over the four Contigs that show significant homology to genes such as those involved in adherence and biotin metabolism, which may prove beneficial to Lb. paracasei NFBC338 under certain environmental conditions. This study provides a novel insight into the rich plasmid complement of this probiotic Lactobacillus strain, which may potentially be exploited as the basis for development of improved genetic tools for probiotic lactobacilli.     

Characterization of a novel cryptic plasmid, pHLHK26, in Laribacter hongkongensis

We report the complete nucleotide sequence and characterization of a cryptic plasmid, pHLHK26, recovered from a strain of Laribacter hongkongensis isolated from a patient with community acquired gastroenteritis. pHLHK26 consists of 8700 bp, with G + C content 51.3%. The copy number (mean +/- SD) is 0.57 +/- 0.07 and it is stable after four passages (about 240 generations) in the absence of selection. There is a predicted origin of replication that consists of a DnaA box and five 22-bp direct repeats. pHLHK26 has four ORFs with two genes encoded in the sense direction and the other two in antisense direction. These four ORFs encode a putative plasmid partitioning protein of the ParA family, a putative protein that contains putative ADP-ribose 1"-phosphatase activity belonging to the Appr-1-p processing enzyme family, a putative recombinase (TniR) of the resolvase/invertase family, and a putative replication protein, respectively. We speculate that pHLHK26 is a theta, possibly Class A, replicative plasmid, as it contains an origin of replication with AT-rich region, a number of iterons and a DnaA box and a gene that encodes a replicative protein most homologous to those of other theta replicative plasmids and it shares eight of the nine positions of the consensus sequence TTAT(C/A)CA(C/A)A (TTTTCCACA in pHLHK26) in the DnaA boxes observed in other classical examples of Class A plasmids of this group.     

Molecular characterization and interstrain variability of pHPS1, a plasmid isolated from the Sydney strain (SS1) of Helicobacter pylori

The 5846-bp circular plasmid pHPS1 of Helicobacter pylori Sydney strain, SS1, was cloned, sequenced, and structurally characterized. The SS1 strain is widely used in animal studies of H. pylori infection. The sequence of pHPS1 revealed three open reading frames (ORFs), all of which are transcribed. Two ORFs encode putative plasmid replication proteins, RepA and RepB, similar to replicases resident on theta plasmids. In contrast, the function of ORF2 remains cryptic due to the absence of sequence similarity with any known protein in sequence databases. In addition, species specificity of these three coding regions was shown using DNA dot blot hybridization in 57 diverse clinical H. pylori isolates and 32 Helicobacter and Campylobacter strains. RepA appears to be the predominant plasmid replication protein of H. pylori and the deduced amino acid sequence was highly conserved (76-96%) in 8 H. pylori isolates, including SS1. RepB was detected in 3 H. pylori isolates examined in this study, 2 of which possess only the repB gene. Analysis of the protein sequences of these two replicases, together with previously characterized H. pylori plasmid replication proteins, supports the formation of a distinct class of H. pylori plasmid proteins. Moreover, comprehensive analysis of the whole genome sequence of H. pylori strain 26695, pHPS1, and other H. pylori plasmid sequences that are available revealed interesting insights as to the occurrence of plasmid-mediated recombination within H. pylori. Common regions between plasmids and chromosome sequences of H. pylori were identified in this study which could only have arisen by genetic recombination, thus providing the first line of evidence, albeit indirectly, of the contribution of H. pylori plasmids in generating an extensive genetic heterogeneity characteristic of this important gastroduodenal pathogen.     

Analysis of the replicon region and identification of an rRNA operon on pBM400 of Bacillus megaterium QM B1551

An 18 633 bp region containing the replicon from the approximately 53 kb pBM400 plasmid of Bacillus megaterium QM B1551 has been sequenced and characterized. This region contained a complete rRNA operon plus 10 other potential open reading frames (ORFs). The replicon consisted of an upstream promoter and three contiguous genes (repM400, orfB and orfC) that could encode putative proteins of 428, 251 and 289 amino acids respectively. A 1.6 kb minimal replicon was defined and contained most of repM400. OrfB was shown to be required for stability. Three 12 bp identical tandem repeats were located within the coding region of repM400, and their presence on another plasmid caused incompatibility with their own cognate replicon. Nonsense, frameshift and deletion mutations in repM400 prevented replication, but each mutation could be complemented in trans. RepM400 had no significant similarity to sequences in the GenBank database, whereas five other ORFs had some similarity to gene products from other plasmids and the Bacillus genome. An rRNA operon was located upstream of the replication region and is the first rRNA operon to be sequenced from B. megaterium. Its unusual location on non-essential plasmid DNA has implications for systematics and evolutionary biology.     

Molecular organization of the minimal replicon of novel, narrow-host-range, lactococcal plasmid pCI305

Plasmid pCI305 is an 8.7-kb, narrow-host-range, cryptic plasmid originating from Lactococcus lactis subsp. lactis UC317. The nucleotide sequence of the pCI305 replication region was determined. A single open reading frame of 1158 bp was identified in the trans-active domain repB. The size of the predicted repB protein (46 kDa) is in close agreement with the size of the repB product visualized in vivo in Escherichia coli when repB was placed under control of the inducible phi T7 RNA polymerase promoter. In vivo substitution of the native repB promoter sequence with a Tn5-derived promoter sequence was demonstrated. repA, a 344-bp cis-acting region which is the probable pCI305 replication origin region, was noncoding, was AT-rich, and possessed a unique set of inverted and direct repeat sequences. No significant homology between repA or repB and other gram-positive replication regions was evident. Combined with the absence of a detectable single-stranded DNA intermediate during replication, these results indicate that the pCI305 replication region differs markedly from most gram-positive replicons examined to date. The presence on other lactococcal plasmids of replication regions related to that of pCI305 was demonstrated.     

pEOC01: a plasmid from Pediococcus acidilactici which encodes an identical streptomycin resistance (aadE) gene to that found in Campylobacter jejuni

The complete nucleotide sequence of pEOC01, a plasmid (11,661 bp) from Pediococcus acidilactici NCIMB 6990 encoding resistance to clindamycin, erythromycin, and streptomycin was determined. The plasmid, which also replicates in Lactococcus and Lactobacillus species contains 16 putative open reading frames (ORFs), including regions annotated to encode replication, plasmid maintenance and multidrug resistance functions. Based on an analysis the plasmid replicates via a theta replicating mechanism closely related to those of many larger Streptococcus and Enterococcus plasmids. Interestingly, genes homologous to a toxin/antitoxin plasmid maintenance system are present and are highly similar to the omega-epsilon-zeta operon of Streptococcus plasmids. The plasmid contains two putative antibiotic resistance homologs, an ermB gene encoding erythromycin and clindamycin resistance, and a streptomycin resistance gene, aadE. Of particular note is the aadE gene which holds 100% identity to an aadE gene found in Campylobacter jejuni plasmid but which probably originated from a Gram-positive source. This observation is significant in that it provides evidence for recent horizontal transfer of streptomycin resistance from a lactic acid bacterium to a Gram-negative intestinal pathogen and as such infers a role for such plasmids for dissemination of antibiotic resistance genes possibly in the human gut.     

Isolation and characterization of two novel plasmids pCYM01 and pCYM02 of Cylindrospermum stagnale

Cyanobacteria play a vital role in supplying nitrogen into the soil and aquatic ecosystem. It has an extra chromosomal DNA, whose role is not yet defined well. Isolation and characterization of extra chromosomal DNA in cyanobacteria might help to understand its survival mechanism. Cylindrospermum stagnale isolated (and deposited in NRMCF 3001) from soil showed presence of four plasmids namely pCYLM01, pCYLM02, pCYLM03, and pCYLM04. The following plasmids pCYLM01 and pCYLM02 were subjected to restriction digestion using HindIII restriction enzyme and cloned into pBlueScriptSK(-) vector. The sequence of pCYLM01 contained 4 potential open reading frames (ORFs) that have amino acids in the range of 59–299. Among them, ORF1 shows high sequence homology to the bacterial replication initiator family protein as evident from BLASTP analysis. The analysis of 4359 bp plasmid pCYLM02 sequence revealed 7 ORFs which are longer than 50 amino acids in length. The ORF2 of pCYLM02 has 243 amino acids and is represented in the plasmid sequence from 3045 to 3776 bp. The ORF3 of pCYLM02 corresponds to the plasmid sequence from 2323 to 2976 and codes for a putative protein of 217 amino acids long. A number of small ORFs below 50 bp were also found in the sequence analysis.     

Characterization of a theta-type plasmid from Lactobacillus sakei: a potential basis for low-copy-number vectors in lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.     

Bioinformatic and partial functional analysis of pEspA and pEspB, two plasmids from Exiguobacterium arabatum sp. nov. RFL1109

The complete nucleotide sequences of two plasmids from Exiguobacterium arabatum sp. nov. RFL1109, pEspA (4563bp) and pEspB (38,945bp), have been determined. Five ORFs were identified in the pEspA plasmid, and putative functions were assigned to two of them. Using deletion mapping approach, the Rep-independent replication region of pEspA, which functions in Bacillus subtilis, was localized within a 0.6kb DNA region. Analysis of the pEspB sequence revealed 42 ORFs. From these, function of two genes encoding enzymes of the Lsp1109I restriction-modification system was confirmed experimentally, while putative functions of another 18 ORFs were suggested based on comparative analysis. Three functional regions have been proposed for the pEspB plasmid: the putative conjugative transfer region, the region involved in plasmid replication and maintenance, and the region responsible for transposition of the IS21 family-like transposable elements.     

Molecular characterization of three plasmids from Bifidobacterium longum

The complete nucleotide sequences for pNAC1 (3538bp) from strain RW048 as well as for pNAC2 (3684bp) and pNAC3 (10,224bp) from strain RW041 of Bifidobacterium longum were determined. The largest ORF (repB) of pNAC1 encodes a putative protein similar to those involved in a rolling-circle (RC) replication mechanism, which was confirmed by demonstration of single-strand intermediates in the host cell. The putative RepB gene product of pNAC2 is most similar to the replication protein of pDOJH10L and pKJ36. A second gene (mob) is similar to mobilization proteins involved in conjugation. Plasmid pNAC3 is the largest bifidobacterial plasmid to be sequenced to date. Of the eight putative gene products coded by pNAC3, one is similar to replication proteins (RepB), and another (Orf2) to putative transfer proteins (Tra). Bifidobacterial plasmids were divided into five groups based on Rep amino acid sequence homology and the results suggest a new plasmid family for B. longum.