The crystal structures of human alpha-thrombin complexed with active site-directed diamino benzo[b]thiophene derivatives: a binding mode for a structurally novel class of inhibitors

The crystal structures of four active site-directed thrombin inhibitors, 1-4, in a complex with human alpha-thrombin have been determined and refined at up to 2.0 A resolution using X-ray crystallography. These compounds belong to a structurally novel family of inhibitors based on a 2,3-disubstituted benzo[b]thiophene structure. Compared to traditional active-site directed inhibitors, the X-ray crystal structures of these complexes reveal a novel binding mode. Unexpectedly, the lipophilic benzo[b]thiophene nucleus of the inhibitor appears to bind in the S1 specificity pocket. At the same time, the basic amine of the C-3 side chain of the inhibitor interacts with the mostly hydrophobic proximal, S2, and distal, S3, binding sites. The second, basic amine side chain at C-2 was found to point away from the active site, occupying a location between the S1 and S1' sites. Together, the aromatic rings of the C-2 and C-3 side chains sandwich the indole ring of Trp60D contained in the thrombin S2 insertion loop defined by the sequence "Tyr-Pro-Pro-Trp." [The thrombin residue numbering used in this study is equivalent to that reported for chymotrypsinogen (Hartley BS, Shotton DM, 1971, The enzymes, vol. 3. New York: Academic Press. pp 323-373).] In contrast to the binding mode of more classical thrombin inhibitors (D-Phe-Pro-Arg-H, NAPAP, Argatroban), this novel class of benzo[b]thiophene derivatives does not engage in hydrogen bond formation with Gly216 of the thrombin active site. A detailed analysis of the three-dimensional structures not only provides a clearer understanding of the interaction of these agents with thrombin, but forms a foundation for rational structure-based drug design. The use of the data from this study has led to the design of derivatives that are up to 2,900-fold more potent than the screening hit 1.     

Crystal structures of thrombin with thiazole-containing inhibitors: probes of the S1'' binding site.

Structures of the blood clotting enzyme thrombin complexed with hirugen and two active site inhibitors, RWJ-50353 10080(N-methyl-D-phenylalanyl-N-[5-[(aminoiminomethyl)amino]-1- [[(2-benzothiazolyl)carbonyl]butyl]-L-prolinamide trifluoroacetate hydrate) and RWJ-50215 (N-[4-(aminoiminomethyl)amino-1-[2- (thiazol-2-ylcarbonylethyl)piperidin- 1-ylcarbonyl]butyl]-5-(dimethylamino)naphthalenesulfonamide trifluoroacetate hydrate), were determined by x-ray crystallography. The refinements converged at R values of 0.158 in the 7.0-2.3-A range for RWJ-50353 and 0.155 in the 7.0-1.8-A range for RWJ-50215. Interactions between the protein and the thiazole rings of the two inhibitors provide new valuable information about the S1' binding site of thrombin. The RWJ-50353 inhibitor consists of an S1'-binding benzothiazole group linked to the D-Phe-Pro-Arg chloromethyl ketone motif. Interactions with the S1-S3 sites are similar to the D-phenylalanyl-prolyl-arginyl chloromethylketone structure. In RWJ-50215, a S1'-binding 2-ketothiazole group was added to the thrombin inhibitor-like framework of dansylarginine N-(3-ethyl-1,5-pentanediyl)amide. The geometry at the S1-S3 sites here is also similar to that of the parent compound. The benzothiazole and 2-ketothiazole groups bind in a cavity surrounded by His57, Tyr60A, Trp60D, and Lys60F. This location of the S1' binding site is consistent with previous structures of thrombin complexes with hirulog-3, CVS-995, and hirutonin-2 and -6. The ring nitrogen of the RWJ-50353 benzothiazole forms a hydrogen bond with His57, and Lys60F reorients because of close contacts. The oxygen and nitrogen of the ketothiazole of RWJ-50215 hydrogen bond with the NZ atom of Lys60F.     

Crystallographic determination of the structures of human alpha-thrombin complexed with BMS-186282 and BMS-189090.

The crystallographic structures of the ternary complexes of human alpha-thrombin with hirugen (a sulfated hirudin fragment) and the small-molecule active site thrombin inhibitors BMS-186282 and BMS-189090 have been determined at 2.6 and 2.8 A. In both cases, the inhibitors, which adopt very similar bound conformations, bind in an antiparallel beta-strand arrangement relative to the thrombin main chain in a manner like that reported for PPACK, D-Phe-Pro-Arg-CH2Cl. They do, however, exhibit differences in the binding of the alkyl guanidine moiety in the specificity pocket. Numerous hydrophilic and hydrophobic interactions serve to stabilize the inhibitors in the binding pocket. Although PPACK forms covalent bonds to both serine and the histidine of the catalytic triad of thrombin, neither BMS-186282 nor BMS-189090 bind covalently and only BMS-186282 forms a hydrogen bond to the serine of the catalytic triad. Both inhibitors bind with high affinity (Ki = 79 nM and 3.6 nM, respectively) and are highly selective for thrombin over trypsin and other serine proteases.     

Thrombin inhibitors built on an azaphenylalanine scaffold

A series of azaphenylalanine derivatives were investigated as novel thrombin inhibitors based on the prodrug principle. By systematic structural modifications we have identified optimal groups for this series that led us to potent inhibitors of thrombin incorporating the benzamidine fragment at the P1 position, and their potentially orally active benzamidoxime prodrugs. The binding modes in the thrombin active site of two representative compounds were identified by X-ray crystallographic analysis.     

Thrombin binding to the A alpha-, B beta-, and gamma-chains of fibrinogen and to their remnants contained in fragment E

In order to study thrombin interaction with fibrinogen, thrombin binding to fragments D and E (prepared by plasmin digestion of fibrinogen) and to intact S-carboxymethylated chains of fibrinogen (A alpha, B beta, and gamma) was analyzed by autoradiography, immunoblotting, and affinity chromatography. Complex formation was observed between late fragment E and thrombin but not with fragment D. The three reduced chain remnants of fragment E all formed complexes with thrombin. Also, thrombin bound to the intact, separated A alpha, B beta, and gamma chains of fibrinogen as well as to the alpha and beta chains of fibrin. In these experiments the extended substrate-binding site, but not the catalytic-binding site, was being examined because fragment E had as its amino-terminal amino acids Val20 in the alpha chain, Lys54 in the beta chain, and Tyr1 in the gamma chain. Also, thrombin inhibited in its active center by D-phenyl-alanyl-L-prolyl-L-arginine-chloromethyl ketone bound to fragment E and to the separated chains in the same manner as unmodified thrombin. A lysine residue to thrombin was essential for its binding to fibrinogen. Thrombin attached to CNBr-activated Sepharose through its amino groups did not bind to fragment E, but when thrombin was attached through its carboxyl groups, it bound fragment E.     

Crystal structure of human factor VIIa/tissue factor in complex with peptide mimetic inhibitor

The 3D structure of human factor VIIa/soluble tissue factor in complex with a peptide mimetic inhibitor, propylsulfonamide-D-Thr-Met-p-aminobenzamidine, is determined by X-ray crystallography. As compared with the interactions between thrombin and thrombin inhibitors, the interactions at S2 and S3 sites characteristic of factor VIIa and factor VIIa inhibitors are revealed. The S2 site has a small pocket, which is filled by the hydrophobic methionine side chain in P2. The small S3 site fits the small size residue, D-threonine in P3. The structural data and SAR data of the peptide mimetic inhibitor show that these interactions in the S2 and S3 sites play an important role for the improvement of selectivity versus thrombin. The results will provide valuable information for the structure-based drug design of specific inhibitors for FVIIa/TF.     

Active site-independent recognition of substrates and product by bovine prothrombinase: a fluorescence resonance energy transfer study

The conversion of prothrombin to thrombin is catalyzed by prothrombinase, an enzyme complex composed of the serine proteinase factor Xa and a cofactor protein, factor Va, assembled on membranes. Kinetic studies indicate that interactions with extended macromolecular recognition sites (exosites) rather than the active site of prothrombinase are the principal determinants of binding affinity for substrate or product. We now provide a model-independent evaluation of such ideas by physical studies of the interaction of substrate derivatives and product with prothrombinase. The enzyme complex was assembled using Xa modified with a fluorescent peptidyl chloromethyl ketone to irreversibly occlude the active site. Binding was inferred by prethrombin 2-dependent perturbations in the fluorescence of Oregon Green(488) at the active site of prothrombinase. Active site-independent binding was also unequivocally established by fluorescence resonance energy transfer between 2,6-dansyl tethered to the active site of Xa and eosin tethered to the active sites of either thrombin or meizothrombin des fragment 1. Comparable interprobe distances obtained from these measurements suggest that substrate and product interact equivalently with the enzyme. Competition established the ability of a range of substrate or product derivatives to bind in a mutually exclusive fashion to prothrombinase. Equilibrium dissociation constants obtained for the active site-independent binding of prothrombin, prethrombin 2, meizothrombin des fragment 1 and thrombin to prothrombinase were comparable with their affinities inferred from kinetic studies using active enzyme. Our findings directly establish that binding affinity is principally determined by the exosite-mediated interaction of either the substrate, both possible intermediates, or product with prothrombinase. A single type of exosite binding interaction evidently drives affinity and binding specificity through the stepwise reactions necessary for the two cleavage reactions of prothrombin activation and product release.     

P3 optimization of functional potency, in vivo efficacy and oral bioavailability in 3-aminopyrazinone thrombin inhibitors bearing non-charged groups at the P1 position

Although the S3 pocket of the thrombin active site is lined with lipophilic amino acid residues, the accommodation of polarity within the lipophilic P3 moiety of small molecule inhibitors is possible provided that the polar functionality is capable of pointing away from the binding pocket outwards toward solvent while simultaneously allowing the lipophilic portion of the P3 ligand to interact with the S3 amino acid residues. Manipulation of this motif provided the means to effect optimization of functional potency, in vivo antithrombotic efficacy and oral bioavailability in a series of 3-aminopyrazinone thrombin inhibitors which contained non-charged groups at the P1 position.     

Interaction between squash inhibitors and bovine trypsinogen

Squash seeds proteinase inhibitors form stoichiometric complexes with bovine trypsinogen. In terms of association constants (Ka), the interaction is weak. The inhibitors bind to the zymogen with Ka values of approx. 10(4)M-1 i.e. 2 X 10(7) times weaker than to bovine beta-trypsin. Squash inhibitor with Lys at the P1 position binds to trypsinogen with a Ka value 2.1-fold higher than the inhibitor with Arg at P1. The Ile-Val binding cleft and the Ca2+ binding site of trypsinogen are cooperatively linked to the inhibitor binding site. Although these three sites are spatially separated, either binding of calcium ion or Ile-Val dipeptide to trypsinogen increase the Ka values 3-fold and more than 100-fold, respectively. In the presence of Ile-Val trypsinogen resynthetizes extremely slowly (about 10(4) times slower than beta-trypsin) the reactive site peptide bond in squash inhibitors.     

The heparin binding site of protein C inhibitor is protease-dependent

Protein C inhibitor (PCI) is a member of the serpin family of protease inhibitors with many biological functions and broad inhibitory specificity. Its major targets in blood are thrombin and activated protein C (APC), and the inhibition of both enzymes can be accelerated by glycosaminoglycans, including heparin. Acceleration of thrombin and APC inhibition by PCI requires that both protease and inhibitor bind to the same heparin chain to form a bridged Michaelis complex. However, the position of the heparin binding site of APC is opposite to that of thrombin, and formation of the bridged complexes must require either radical reorientation of the proteases relative to PCI or alternate heparin binding modes for PCI. In this study, we investigate how heparin bridges thrombin and APC to PCI by determining the effect of mutations in and around the putative heparin binding site of PCI. We found that heparin binds PCI in a linear fashion along helix H to bridge thrombin, consistent with our recent crystal structure (3B9F), but that it must rotate by approximately 60 degrees to engage Arg-229 to bridge APC. To gain insight into the possible modes of heparin binding to PCI, we solved a crystal structure of cleaved PCI bound to an octasaccharide heparin fragment to 1.55 angstroms resolution. The structure reveals a binding mode across the N terminus of helix H to engage Arg-229 and align the heparin binding site of APC. A molecular model for the heparin-bridged PCI.APC complex was built based on mutagenesis and structural data.     

Subcellular trafficking abnormalities of a prion protein with a disrupted disulfide loop

The recombinant phage antibody system pCANTAB 5E has been used to display functionally active leech-derived tryptase inhibitor (LDTI) on the tip of the filamentous M13 phage. A limited combinatorial library of 5.2 x 10(4) mutants was created with a synthetic LDTI gene, using a degenerated oligonucleotide and the pCANTAB 5E phagemid. The mutations were restricted to the P1-P4' positions of the reactive site. Fusion phages and appropriate host strains containing the phagemids were selected after binding to thrombin and DNA sequencing. The variants LDTI-2T (K8R, I9V, S10, K11W, P12A), LDTI-5T (K8R, I9V, S10, K11S, P12L) and LDTI-10T (K8R, I9L, S10, K11D, P12I) were produced with a Saccharomyces cerevisiae expression system. The new inhibitors, LDTI-2T and -5T, prolong the blood clotting time, inhibit thrombin (Ki 302 nM and 28 nM) and trypsin (Ki 6.4 nM and 2.1 nM) but not factor Xa, plasma kallikrein or neutrophil elastase. The variant LDTI-10T binds to thrombin but does not inhibit it. The relevant reactive site sequences of the thrombin inhibiting variants showed a strong preference for arginine in position P1 (K8R) and for valine in P1' (I9V). The data indicate further that LDTI-5T might be a model candidate for generation of active-site directed thrombin inhibitors and that LDTI in general may be useful to generate specific inhibitors suitable for a better understanding of enzyme-inhibitor interactions.     

Localization of the binding site on fibrin for the secondary binding site of thrombin

Affinity chromatography of active site inhibited thrombin on immobilized fragments derived from the central (desAB-NDSK) and terminal (D1) globular domains of fibrinogen revealed that the site responsible for the binding of thrombin at its secondary fibrin binding site is located in the central domain. Chromatography of various domains of the central nodule (desAB-NDSK, fibrinogen E, and fibrin E) having nonidentical amino acid sequences showed that all of these fragments are capable of binding to PMSF-thrombin-Sepharose, suggesting that the thrombin binding site resides within the peptide regions common to all of these fragments: alpha(Gly17-Met51), beta(Val55-Met118), and gamma(Tyr1-Lys53). Competitive affinity chromatography of the same binding domains revealed that there is no detectable difference in their binding constants to PMSF-thrombin-Sepharose, indicating that the alpha(Lys52-Lys78), beta(Gly15-Lys54)/(Tyr119-Lys122), and gamma(Thr54-Met78) peptide segments do not contribute significantly to the binding of thrombin. Chromatography of the isolated chains of fibrinogen E showed that the alpha(Gly17-Lys78) peptide region itself contains a strong binding site for PMSF-thrombin-Sepharose. The location of the binding site suggests that the secondary site interaction may play an important role in determining the cleavage specificity of thrombin on fibrinogen and can affect the rate of release of the fibrinopeptides. Affinity chromatography of fragments prepared from polymerized fibrin showed that cross-linked DD (D x D) itself does not bind to thrombin, whereas the D x DE complex remained attached to the column, suggesting that the binding site on fragment E for thrombin is distinct from its binding site for D x D.(ABSTRACT TRUNCATED AT 250 WORDS)     

Think Twice: Understanding the High Potency of Bis(phenyl)methane Inhibitors of Thrombin

Successful design of potent and selective protein inhibitors, in terms of structure-based drug design, strongly relies on the correct understanding of the molecular features determining the ligand binding to the target protein. We present a case study of serine protease inhibitors with a bis(phenyl)methane moiety binding into the S3 pocket. These inhibitors bind with remarkable potency to the active site of thrombin, the blood coagulation factor IIa. A combination of X-ray crystallography and isothermal titration calorimetry provides conclusive insights into the driving forces responsible for the surprisingly high potency of these inhibitors. Analysis of six well-resolved crystal structures (resolution 1.58-2.25 Å) along with the thermodynamic data allows an explanation of the tight binding of the bis(phenyl)methane inhibitors. Interestingly, the two phenyl rings contribute to binding affinity for very different reasons — a fact that can only be elucidated by a structure-based approach. The first phenyl moiety occupies the hydrophobic S3 pocket, resulting in a mainly entropic advantage of binding. This observation is based on the displacement of structural water molecules from the S3 pocket that are observed in complexes with inhibitors that do not bind in the S3 pocket. The same classic hydrophobic effect cannot explain the enhanced binding affinity resulting from the attachment of the second, more solvent-exposed phenyl ring. For the bis(phenyl)methane inhibitors, an observed adaptive rotation of a glutamate residue adjacent to the S3 binding pocket attracted our attention. The rotation of this glutamate into salt-bridging distance with a lysine moiety correlates with an enhanced enthalpic contribution to binding for these highly potent thrombin binders. This explanation for the magnitude of the attractive force is confirmed by data retrieved by a Relibase search of several thrombin-inhibitor complexes deposited in the Protein Data Bank exhibiting similar molecular features.Special attention was attributed to putative changes in the protonation states of the interaction partners. For this purpose, two analogous inhibitors differing mainly in their potential to change the protonation state of a hydrogen-bond donor functionality were compared. Buffer dependencies of the binding enthalpy associated with complex formation could be traced by isothermal titration calorimetry, which revealed, along with analysis of the crystal structures (resolution 1.60 and 1.75 Å), that a virtually compensating proton interchange between enzyme, inhibitor and buffer is responsible for the observed buffer-independent thermodynamic signatures.     

Crystal structure of the thrombin-hirudin complex: a novel mode of serine protease inhibition.

Thrombin is a serine protease that plays a central role in blood coagulation. It is inhibited by hirudin, a polypeptide of 65 amino acids, through the formation of a tight, noncovalent complex. Tetragonal crystals of the complex formed between human alpha-thrombin and recombinant hirudin (variant 1) have been grown and the crystal structure of this complex has been determined to a resolution of 2.95 A. This structure shows that hirudin inhibits thrombin by a previously unobserved mechanism. In contrast to other inhibitors of serine proteases, the specificity of hirudin is not due to interaction with the primary specificity pocket of thrombin, but rather through binding at sites both close to and distant from the active site. The carboxyl tail of hirudin (residues 48-65) wraps around thrombin along the putative fibrinogen secondary binding site. This long groove extends from the active site cleft and is flanked by the thrombin loops 35-39 and 70-80. Hirudin makes a number of ionic and hydrophobic interactions with thrombin in this area. Furthermore hirudin binds with its N-terminal three residues Val, Val, Tyr to the thrombin active site cleft. Val1 occupies the position P2 and Tyr3 approximately the position P3 of the synthetic inhibitor D-Phe-Pro-ArgCH2Cl. Thus the hirudin polypeptide chain runs in a direction opposite to that expected for fibrinogen and that observed for the substrate-like inhibitor D-Phe-Pro-ArgCH2Cl.     

Design and structure-activity relationship of thrombin inhibitors with an azaphenylalanine scaffold: potency and selectivity enhancements via P2 optimization

Theoretical and structural studies followed by the directed synthesis and in vitro biological tests lead us to novel noncovalent thrombin pseudopeptide inhibitors. We have incorporated an azapeptide scaffold into the central part of the classical tripeptide D-Phe-Pro-Arg inhibitor structure thus eliminating one stereogenic center from the molecule. A series of compounds has been designed to optimize the occupancy of the S2 pocket of thrombin. Increased hydrophobicity at P2 provides an enhanced fit into this active site S2 pocket. In the present paper, we also report on the structure of these inhibitors in solution and conformational analysis of inhibitors in the active site in order to asses the consequences of the replacement of the central alpha-CH by a nitrogen functionality. In vitro biological testing of the designed inhibitors shows that elimination of R, S stereoisomerism and restriction of conformational freedom influences the binding of inhibitors in a favorable fashion.     

Crystal structures of thrombin complexed to a novel series of synthetic inhibitors containing a 5,5-trans-lactone template.

The binding modes of four active site-directed, acylating inhibitors of human alpha-thrombin have been determined using X-ray crystallography. These inhibitors (GR157368, GR166081, GR167088, and GR179849) are representatives of a series utilizing a novel 5, 5-trans-lactone template to specifically acylate Ser195 of thrombin, resulting in an acyl complex. In each case the crystal structure of the complex reveals a binding mode which is consistent with the formation of a covalent bond between the ring-opened lactone of the inhibitor and residue Ser195. Improvements in potency and selectivity of these inhibitors for thrombin are rationalized on the basis of the observed protein/inhibitor interactions identified in these complexes. Occupation of the thrombin S2 and S3 pockets is shown to be directly correlated with improved binding and a degree of selectivity. The binding mode of GR179849 to thrombin is compared with the thrombin/PPACK complex [Bode, W., Turk, D., and Karshikov, A. (1992) Protein Sci. 1, 426-471] as this represents the archetypal binding mode for a thrombin inhibitor. This series of crystal structures is the first to be reported of synthetic, nonpeptidic acylating inhibitors bound to thrombin and provides details of the molecular recognition features that resulted in nanomolar potency.     

Preparation and application of a photoreactive thrombin analogue: binding to human platelets

alpha-Thrombin has previously been shown to bind to specific, saturable glycoproteins on the platelet surface. Modification of the thrombin active site with tosyllysyl chloromethyl ketone (TosLysCH2Cl) does not alter thrombin's binding characteristics. Interaction of alpha-thrombin with high-affinity binding sites (KD = 10(-9) M) initiates the platelet response which involves proteolytic hydrolysis of this glycoprotein. Although TosLysCH2Cl--thrombin binds to and competes for the same sites as alpha-thrombin, it cannot induce platelet stimulation because it is enzymatically inactive. In this study, we describe the preparation and application of photoreactive tritium-labeled thrombin analogues. The alpha-thrombin derivative retains its platelet-stimulating and enzymatic activities and, upon photoactivation, covalently binds to specific platelet membrane components. When freshly washed human platelets are exposed to less than saturation doses (less than or equal to 2 nM) of the thrombin derivatives in the dark and photoactivated, a single labeled complex is detected. The same experiment with greater than saturating doses (greater than or equal to 20 nM) of the thrombin derivative yields a similar complex as well as two additional ones. Molecular weight estimates of these thrombin-bound complexes were obtained by gel filtration and NaDodSO4--polyacrylamide gel electrophoresis. The low dose (high affinity) complex with TosLysCH2Cl--thrombin has an approximate molecular weight of 200 000, while that with active alpha-thrombin is smaller, approximately 120 000, due to enzymatic cleavage. The additional complexes detected with the high thrombin dose had estimated molecular weights of 400 000 and 46 000, respectively, and appeared to be the same for TosLysCH2Cl--thrombin and for the alpha-thrombin coupled platelets. These isolated complexes appear to correspond to the two previously detected populations of thrombin binding sites on the platelet.     

Probing the hirudin-thrombin interaction by incorporation of noncoded amino acids and molecular dynamics simulation

Thrombin is a primary target for the development of novel anticoagulants, since it plays two important and opposite roles in hemostasis: procoagulant and anticoagulant. All thrombin functions are influenced by Na+ binding, which triggers the transition of this enzyme from an anticoagulant (slow) form to a procoagulant (fast) form. In previous studies, we have conveniently produced by chemical synthesis analogues of the N-terminal fragment 1-47 of hirudin HM2 containing noncoded amino acids and displaying up to approximately 2700-fold more potent antithrombin activity, comparable to that of full-length hirudin. In the work presented here, we have exploited the versatility of chemical synthesis to probe the structural and energetic properties of the S3 site of thrombin through perturbations introduced in the structure of hirudin fragment 1-47. In particular, we have investigated the effects of systematic replacement of Tyr3 with noncoded amino acids retaining the aromatic nucleus of Tyr, as well as similar hydrophobic and steric properties, but possessing different electronic (e.g., p-fluoro-, p-iodo-, or p-nitro-Phe), charge (p-aminomethyl-Phe), or conformational (homo-Phe) properties. Our results indicate that the affinity of fragment 1-47 for thrombin is proportional to the desolvation free energy change upon complex formation, and is inversely related to the electric dipole moment of the amino acid side chain at position 3 of hirudin. In this study, we have also identified the key features that are responsible for the preferential binding of hirudin to the procoagulant (fast) form of thrombin. Strikingly, shaving at position 3, by Tyr --> Ala exchange, abolishes the differences in the affinity for thrombin allosteric forms, whereas a bulkier side chain (e.g., beta-naphthylalanine) improves binding preferentially to the fast form. These results provide strong, albeit indirect, evidence that the procoagulant (fast) form of thrombin is in a more open and accessible conformation with respect to the less forgiving structure it acquires in the slow form. This view is also supported by the results of molecular dynamics simulations conducted for 18 ns on free thrombin in full explicit water, showing that after approximately 5 ns thrombin undergoes a significant conformational transition, from a more open conformation (which we propose can be related to the fast form) to a more compact and closed one (which we propose can be related to the slow form). This transition mainly involves the Trp148 and Trp60D loop, the S3 site, and the fibrinogen binding site, whereas the S1 site, the Na+-binding site, and the catalytic pocket remain essentially unchanged. In particular, our data indicate that the S3 site of the enzyme is less accessible to water in the putative slow form. This structural picture provides a reasonable molecular explanation for the fact that physiological substrates related to the procoagulant activity of thrombin (fibrinogen, thrombin receptor 1, and factor XIII) orient a bulky side chain into the S3 site of the enzyme. Taken together, our results can have important implications for the design of novel thrombin inhibitors, of practical utility in the treatment of coagulative disorders.     

The acylaminoacyl peptidase from Aeropyrum pernix K1 thought to be an exopeptidase displays endopeptidase activity

Mammalian acylaminoacyl peptidase, a member of the prolyl oligopeptidase family of serine peptidases, is an exopeptidase, which removes acylated amino acid residues from the N terminus of oligopeptides. We have investigated the kinetics and inhibitor binding of the orthologous acylaminoacyl peptidase from the thermophile Aeropyrum pernix K1 (ApAAP). Complex pH-rate profiles were found with charged substrates, indicating a strong electrostatic effect in the surroundings of the active site. Unexpectedly, we have found that oligopeptides can be hydrolysed beyond the N-terminal peptide bond, demonstrating that ApAAP exhibits endopeptidase activity. It was thought that the enzyme is specific for hydrophobic amino acids, in particular phenylalanine, in accord with the non-polar S1 subsite of ApAAP. However, cleavage after an Ala residue contradicted this notion and demonstrated that P1 residues of different nature may bind to the S1 subsite depending on the remaining peptide residues. The crystal structures of the complexes formed between the enzyme and product-like inhibitors identified the oxyanion-binding site unambiguously and demonstrated that the phenylalanine ring of the P1 peptide residue assumes a position different from that established in a previous study, using 4-nitrophenylphosphate. We have found that the substrate-binding site extends beyond the S2 subsite, being capable of binding peptides with a longer N terminus. The S2 subsite displays a non-polar character, which is unique among the enzymes of this family. The S3 site was identified as a hydrophobic region that does not form hydrogen bonds with the inhibitor P3 residue. The enzyme-inhibitor complexes revealed that, upon ligand-binding, the S1 subsite undergoes significant conformational changes, demonstrating the plasticity of the specificity site.     

Low molecular weight kininogen binds to platelets to modulate thrombin-induced platelet activation

The kininogens, high molecular weight kininogen (HK) and low molecular weight kininogen (LK), are multifunctional, single-gene products that contain bradykinin and identical amino-terminal heavy chains. Studies were performed to determine if LK would bind directly to platelets. 125I-LK specifically bound to gel-filtered platelets in the presence of 50 microM Zn2+. HK effectively competed with 125I-LK for the same binding site (Ki = 27 +/- 9 nM, n = 5). Similarly, the Ki for LK inhibition of 125I-LK binding was 12 +/- 1 nM (n = 3). Albumin, fibrinogen, factor XIII, and kallikrein did not inhibit 125I-LK binding to unstimulated platelets. 125I-LK (66 kDa) was not cleaved upon binding to platelets. The binding of 125I-LK to unstimulated platelets was found to be fully reversible by the addition of a 50 molar excess of unlabeled LK at both 10 and 20 min. LK binding to platelets was saturable with an apparent Kd of 27 +/- 2 nM (mean +/- S.E., n = 9) and 647 +/- 147 binding sites/platelet. Both LK and HK at plasma concentrations inhibited thrombin-induced platelet aggregation. LK and HK at about 5% of plasma concentration also inhibited thrombin-induced secretion of both stirred and unstirred platelets. Both kininogens were found to be noncompetitive inhibitors of proteolytically active thrombin binding to platelets. The kininogens did not inhibit D-phenylalanyl-prolyl-arginine chloromethyl ketone-treated thrombin from binding to platelets. These studies indicated that both kininogens have a region on their heavy chain which allows them to bind to platelets. Further, kininogen binding by its heavy chain modulates thrombin activation of platelets since it prevents proteolytically active thrombin from binding to its receptor.