p-Quinquephenyl diamine, C6H5-p-C6H4-p-C6H2(2,3-NH2)-p-C6H4-C6H5, and its corresponding diimine-Ru(II) complex: Crystal structure and electrochemical and optical properties

The molecular structure of an o-phenylenediamine unit-containing oligophenylene (1), Ph-Ph′-Ph′(2,3-NH₂)-Ph′-Ph (Ph = phenyl; Ph′ = p-phenylene; Ph′(2,3-NH₂) = 2,3-diamino-p-phenylene), was determined by X-ray crystallography. 1 has a twisted structure, and forms an intermolecular C-H?π interaction network. The -NH₂ group of 1 was air-oxidized to an imine, NH, group in the presence of [RuCl₂(bpy)₂] (bpy = 2,2′-bipyridyl) and gave a ruthenium(II)-benzoquinone diimine complex [Ru(2)(bpy)₂](PF₆)₂ (2: Ph-Ph′-Ph′(2,3-imine)-Ph′-Ph). The molecular structure of [Ru(2)(bpy)₂](PF₆)₂ was confirmed by X-ray crystallography. [Ru(2)(bpy)₂](PF₆)₂ underwent two-step electrochemical reduction with E^1/2 = −0.889 V and −1.531 V versus Fc⁺/Fc. The E^1/2’s were located at higher potentials by 91 mV and 117 mV, respectively, than those of reported [Ru(bqdi)(bpy)₂](PF₆)₂ (bqdi = benzoquinone diimine). Electrochemical oxidation of [Ru(2)(bpy)₂](PF₆)₂ occurred at a lower potential by 180 mV than that of [Ru(bqdi)(bpy)₂](PF₆)₂. Occurrence of the easier reduction and oxidation of [Ru(2)(bpy)₂](PF₆)₂ than those of [Ru(bqdi)(bpy)₂](PF₆)₂ is ascribed to the presence of a large π-conjugation system in 2.     

Unexpected formation and structure elucidation of mer-[RuCl3(TMSO)(bpy)] derived from [H(TMSO)][trans-RuCl4(TMSO)2] under mild condition

Treatment of [H(TMSO)][trans-RuCl₄(TMSO)₂] (1) with 2,2′-bipyridine (bpy) in ethanol at room temperature resulted an unknown mer-[RuCl₃(TMSO)(bpy)] (3) and a known cis-[RuCl₂(TMSO)₄] (4) (TMSO =  tetramethylene sulfoxide) complexes. The 3 was obtained by the substitution with bpy in mer-[RuCl₃(TMSO)₃] (2), whereas 4 was obtained by one-electron reduction of 2, suggesting that 2 is a precursor for both 3 and 4. The structure of 3 was determined by single crystal X-ray diffraction. The reaction is a new synthetic procedure for 3 and/or 3 and 4 in mild reaction conditions from the anionic complex 1. It involves simultaneous substitution and redox reaction. This is the first known example of precisely characterized Ru(III)-chloride-TMSO-bpy-complex derived from anionic [H(TMSO)][trans-RuCl₄(TMSO)₂] at room temperature.     

Two new supermolecular structures of organic-inorganic hybrid compounds: [Zn(phen)(SO4)(H2O)2]n and [Cu(phen)(H2O)2] · SO4 (phen = 1,10-phenanthroline)

Two new organic-inorganic hybrid compounds [Zn(phen)(SO₄)(H₂O)₂]_n (1) and [Cu(phen)(H₂O)₂] · SO₄ (2) have been prepared by conventional aqueous solution synthesis and characterized by single-crystal X-ray diffraction, IR spectroscopy, thermal gravimetric analysis (TGA) and fluorescent spectroscopy. In compound 1, the sulfate group adopts bidentate mode to coordinate with two Zn(II) ions to form one-dimensional polymer. The one-dimensional polymers are further linked together via the intermolecular hydrogen-bonding and π-π stacking interactions to form a 3D supramolecular framework. Compound 2 is build up of discrete [Cu(phen)(H₂O]²⁺ cations and SO₄²⁻ anions to form a three-dimensional framework via hydrogen-bonding and π-π stacking interactions. Furthermore, the luminescent properties of both 1 and 2 were studied. The complexes 1 and 2 excited at 280 nm wavelength produced characteristic luminescence features, arising maybe due to the π-π transitions.     

Hydrogen bonding: further evidence for the cause of the color change of nitrosylpentaamminechromium (III) compounds. Crystal structures of [Cr(NO)(NH3)5](PF6)2 and [Cr(NO)(NH3)5]Cl(PF6)

The crystal structures of [Cr(NO)(NH₃)₅](PF₆)₂ (red) and [Cr(NO)(NH₃)₅]Cl(PF₆) (brown) have been determined. The [Cr(NO)(NH₃)₅]²⁺(A) complex cations in these compounds have a slightly distorted octahedral geometry with a strictly linear Cr-N-O arrangement (from symmetry). The short interatomic distances (2.399 Å × 4) between the O (nitrosyl) and H (ammonia in adjacent complex cations) atoms in A(PF₆)₂ indicate the existence of hydrogen bonds, while the interatomic distances (3.258 Å × 8) between those in ACl(PF₆) are much longer, and the hydrogen bonds should be weak in spite of the presence of the smaller counter anion of chloride ion in ACl(PF₆). Comparisons of the five crystal structures of A(PF₆)₂, ACl₂, ACl(ClO₄), ACl(PF₆), and A(ClO₄)₂ have led to the conclusion that the existence of the strong hydrogen bonds gives red crystals of A(PF₆)₂, while the absence of hydrogen bonds results in the formation of green crystals of A(ClO₄)₂ (O ? H, 3.595 Å × 2). The color change of the crystals (from red to green) with the change of outer sphere anions is attributed to the change of the strength of the hydrogen bonding between the complex cations.     

Oxidative addition of methyl iodide to [Rh(CO)2I]2: synthesis, structure and reactivity of neutral rhodium acetyl complexes, [Rh(CO)(NCR)(COMe)I2]2

Reaction of [Rh(CO)₂I]₂ (1) with MeI in nitrile solvents gives the neutral acetyl complexes, [Rh(CO)(NCR)(COMe)I₂]₂ (R=Me, 3a; ^tBu, 3b; vinyl, 3c; allyl, 3d). Dimeric, iodide-bridged structures have been confirmed by X-ray crystallography for 3a and 3b. The complexes are centrosymmetric with approximate octahedral geometry about each Rh centre. The iodide bridges are asymmetric, with Rh-(μ-I) trans to acetyl longer than Rh-(μ-I) trans to terminal iodide. In coordinating solvents, 3a forms mononuclear complexes, [Rh(CO)(sol)₂(COMe)I₂] (sol=MeCN, MeOH). Complex 3a reacts with pyridine to give [Rh(CO)(py)(COMe)I₂]₂ and [Rh(CO)(py)₂(COMe)I₂] and with chelating diphosphines to give [Rh(Ph₂P(CH₂)_nPPh₂)(COMe)I₂] (n=2, 3, 4). Addition of MeI to [Ir(CO)₂(NCMe)I] is two orders of magnitude slower than to [Ir(CO)₂I₂]⁻. A mechanism for the reaction of 1 with MeI in MeCN is proposed, involving initial bridge cleavage by solvent to give [Rh(CO)₂(NCMe)I] and participation of the anion [Rh(CO)₂I₂]⁻ as a reactive intermediate. The possible role of neutral Rh(III) species in the mechanism of Rh-catalysed methanol carbonylation is discussed.     

Reactivity of the N-heterocyclic carbene complexes [Ru(IMes)2(CO)HX] (X = OH, Cl) with alkynes

Treatment of the 16-electron hydroxy hydride complex [Ru(IMes)₂(CO)H(OH)] (1, IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene) with HCCR affords the alkynyl species [Ru(IMes)₂(CO)H(CCR)] (R = Ph 3, SiMe₃, 4) and [Ru(IMes)₂(CO)(CCR)₂] (R = Ph, 5). Deuterium labelling studies show that the mono-alkynyl complexes are formed via hydrogen transfer from a coordinated alkyne ligand to Ru-OH, while bis-alkynyl formation is proposed to take place through hydrogen transfer to Ru-H. Both 3 and 5 readily coordinate CO to give the corresponding dicarbonyl species 6 and 7. Addition of HCCPh to the hydride chloride precursor [Ru(IMes)₂(CO)HCl] (2) results in a different reaction pathway involving alkyne insertion into the Ru-H bond to yield the alkenyl chloride complex [Ru(IMes)₂(CO)(CHCHPh)Cl] 8. Complexes 3-8 have been structurally characterised by X-ray crystallography.     

Coordination chemistry of copper-molybdates with alkoxide ligands: The {Mo4O10(OMe)6} and [Mo2O4{RC(CH2O)3}2] clusters as building blocks

The reactions of the Keplerate super cluster [Mo₁₃₂O₃₇₂(CH₃CO₂)₃₀(H₂O)₇₂]⁴²⁻ with a Cu(II) source and an organonitrogen donor in methanol/DMF solutions yielded a series of bimetallic organic-inorganic oxide hybrid materials, including the molecular species [Cu(phen)₂MoO₄] (1) and [{Cu(terpy)}₂(MoO₄)₂] (2) and a series of materials constructed from the tetranuclear building block {Mo₄O₁₀(OMe)₆}²⁻: the molecular [{Cu₂(phen)₂(O₂CCH₃)₂ (MeOH)}Mo₄O₁₀(OMe)₆] (3), [{Cu(terpy)(O₂CCH₃)}₂Mo₄O₁₀(OMe)₆] (4) and [{Cu(terpy)Cl}₂Mo₄O₁₀(OMe)₆] (5), the one-dimensional phases [{Cu(bpy)(HOMe)₂}Mo₄O₁₀(OMe)₆] (6), [{Cu(bpy)(DMF)₂}Mo₄O₁₀(OMe)₆] (7), [{Cu(bpa)(DMF)₂}Mo₄O₁₀(OMe)₆] (8), [{Cu(phen)(DMF)₂}Mo₄O₁₀(OMe)₆] (9) and [{CuCl(dpa)}₂Mo₄O₁₀(OMe)₆] (10), and the two-dimensional material [{Cu₂(DMF)₂(pdpa)}{Mo₄O₁₀(OMe)₆}₂] (11). When methanol is replaced by the tridentate alkoxide tris-methoxypropane (trisp), the {Mo₂O₄(trisp)₂}²⁻ cluster building block is observed for [Cu(phen)Mo₂O₄(trisp)₂] (12), [Cu(bpa)(DMF)Mo₂O₄(trisp)₂] (13) and [{Cu(bpy)(NO₃)}₂Mo₂O₄(trisp)₂] (14).     

Synthesis, DNA-binding and photocleavage studies of ruthenium complexes [Ru(bpy)2(mitatp)] and [Ru(bpy)2(nitatp)]

Two new ruthenium complexes [Ru(bpy)₂(mitatp)](ClO₄)₂1 and [Ru(bpy)₂(nitatp)](ClO₄)₂2 (bpy = 2,2′-bipyridine, mitatp = 5-methoxy-isatino[1,2-b]-1,4,8,9-tetraazatriphenylene, nitatp = 5-nitro-isatino[1,2-b]-1,4,8,9-tetraazatriphenylene) have been synthesized and characterized by elemental analysis, ¹H NMR, mass spectrometry and cyclic voltammetry. Spectroscopic and viscosity measurements proved that the two Ru(II) complexes intercalate DNA with larger binding constants than that of [Ru(bpy)₂(dppz)]²⁺ (dppz = dipyrido[3,2-a:2′,3′-c]phenazine) and possess the excited lifetime of microsecond scale upon binding to DNA. Both complexes can efficiently photocleave pBR322 DNA in vitro under irradiation. Singlet oxygen (¹O₂) was proved to contribute to the DNA photocleavage process, the ¹O₂ quantum yields was determined to be 0.43 and 0.36 for 1 and 2, respectively. Moreover, a photoinduced electron transfer mechanism was also found to be involved in the DNA cleavage process.     

Formation and structural chemistry of the unusual cyanide-bridged dinuclear species [Ru2(NN)2(CN)7] (NN = 2,2′-bipyridine or 1,10-phenanthroline)

Crystallisation of simple cyanoruthenate complex anions [Ru(NN)(CN)₄]²⁻ (NN = 2,2′-bipyridine or 1,10-phenanthroline) in the presence of Lewis-acidic cations such as Ln(III) or guanidinium cations results, in addition to the expected [Ru(NN)(CN)₄]²⁻ salts, in the formation of small amounts of salts of the dinuclear species [Ru₂(NN)₂(CN)₇]³⁻. These cyanide-bridged anions have arisen from the combination of two monomer units [Ru(NN)(CN)₄]²⁻ following the loss of one cyanide, presumably as HCN. The crystal structures of [Nd(H₂O)_5.5][Ru₂(bipy)₂(CN)₇] · 11H₂O and [Pr(H₂O)₆][Ru₂(phen)₂(CN)₇] · 9H₂O show that the cyanoruthenate anions form Ru-CN-Ln bridges to the Ln(III) cations, resulting in infinite coordination polymers consisting of fused Ru₂Ln₂(μ-CN)₄ squares and Ru₄Ln₂(μ-CN)₆ hexagons, which alternate to form a one-dimensional chain. In [CH₆N₃]₃[Ru₂(bipy)₂(CN)₇] · 2H₂O in contrast the discrete complex anions are involved in an extensive network of hydrogen-bonding involving terminal cyanide ligands, water molecules, and guanidinium cations. In the [Ru₂(NN)₂(CN)₇]³⁻ anions themselves the two NN ligands are approximately eclipsed, lying on the same side of the central Ru-CN-Ru axis, such that their peripheries are in close contact. Consequently, when NN = 4,4′-^tBu₂-2,2′-bipyridine the steric bulk of the t-butyl groups prevents the formation of the dinuclear anions, and the only product is the simple salt of the monomer, [CH₆N₃]₂[Ru(^tBu₂bipy)(CN)₄] · 2H₂O. We demonstrated by electrospray mass spectrometry that the dinuclear by-product [Ru₂(phen)₂(CN)₇]³⁻ could be formed in significant amounts during the synthesis of monomeric [Ru(phen)(CN)₄]²⁻ if the reaction time was too long or the medium too acidic. In the solid state the luminescence properties of [Ru₂(bipy)₂(CN)₇]³⁻ (as its guanidinium salt) are comparable to those of monomeric [Ru(bipy)(CN)₄]²⁻, with a ³MLCT emission at 581 nm.     

[Ru(phen)2(dppz)] as an efficient optical probe for staining nuclear components

The ‘molecular light switch’ complexes [Ru(bpy)₂(dppz)]²⁺ (1) and [Ru(phen)₂(dppz)]²⁺ (2), where bpy = 2,2′-bipyridine, phen = 1,10-phenanthroline and dppz = dipyrido[3,2-a:2′,3′-c]phenazine, have been explored as probes for diagnosing and staining nuclear components. The phen complex acts as a better staining agent for nonviable cells than for viable cells and exhibits a staining efficiency in tail region of comet more specific and stronger than the already known dye Hoechst 33258.     

Unusual phenomenon in the chemistry of orthometalated ruthenium (II) complexes

Yellow cyclometalatated ruthenium (II) complexes [Ru(o-X-2-py)(MeCN)₄]PF₆ (1, X = C₆H₄ (a) or 4-MeC₆H₃ (b)) react readily with 1,10-phenanthroline (LL) in MeCN to give brownish-red species cis-[Ru(o-X-2-py)(LL)(MeCN)₂]PF₆ in high yields. The same reaction of the same complexes under the same conditions with 2,2′-bipyridine results in a significant color change from yellow to brownish-orange suggesting a formation of new species. Surprisingly, X-ray structural studies of these two complexes showed that they are structurally indistinguishable from the starting complexes 1. Referred to as complexes 4a,b, the new compounds are slightly more stable in the air though their spectral characteristics in solution are similar to 1a,b. The diffuse reflectance spectroscopy is so far the only technique that indicated differences between 1 and 4.     

Substitution reactions of tetrahydrofuran in [Cr(thf)3Cl3] with mono and bidentate N-donor ligands: X-ray crystal structures of [Cr(bipy)(OH2)Cl3] and [HpyNH2][Cr(bipy)Cl4]

Substitution of thf ligands in [Cr(thf)₃Cl₃] and [Cr(thf)₂(OH₂)Cl₃] was investigated. 2,2′-Bipyridine (bipy) was reacted with [Cr(thf)₃Cl₃] to form [Cr(bipy)(thf)Cl₃] (1), which was subsequently reacted with water to give [Cr(bipy)(OH₂)Cl₃] (2). Reaction of 1 with acetonitrile (CH₃CN), pyridine (py) and pyridine derivatives to form [Cr(bipy)(L)Cl₃] (L = CH₃CN 3, py 4 and 4-pyR with R = NH₂5, Bu^t6 and Ph 7). In addition, the substitution of bipy in [Cr(thf)₃Cl₃] was followed by ¹H NMR spectroscopy at room temperature, which showed completion of the reaction in ca. 100 min. Complex 2 was characterised by single crystal X-ray diffraction. The theoretical powder diffraction pattern of 2 was compared to the experimentally obtained powder X-ray diffraction pattern, and shows excellent agreement. The dimer [Cr₂(bipy)₂Cl₄(μ-Cl)₂] was cleaved asymmetrically to give the anionic complex [Cr(bipy)Cl₄]⁻ (8) and [Cr(bipy)₂Cl₂]⁺ (9). Complexes 8 and 9 were characterised by single crystal X-ray diffraction.     

Ruthenium(II/III) mediated transformation of 1,2-bis(2′-pyridylmethyleneimino)benzene (L) to 2-(2′-benzimidazolyl)pyridine (L′H) and its in situ formed complexes with Ru(II): X-ray structure of trans-[Ru(PPh3)2(L′H)2](ClO4)2

A series of ruthenium (II) complexes of formulae trans-[Ru(PPh₃)₂(L′H)₂](ClO₄)₂ (1), [Ru(bpy)(L′H)₂](ClO₄)₂ (2), [Ru(bpy)₂(L′H)](ClO₄)₂ (3), cis-[Ru(DMSO)₂(L′H)₂]Cl₂ (4), and [Ru(L′H)₃](PF₆)₂ (5) (where L′H = 2-(2′-benzimidazolyl)pyridine) have been synthesized by reaction of the appropriate ruthenium precursor with 1,2-bis(2′-pyridylmethyleneimino)benzene (L). The complexes were characterized by elemental analyses, spectroscopic and electrochemical data. All the complexes were found to be diamagnetic and hence metal is in +2 oxidation state. The molecular structure of trans-[Ru(PPh₃)₂(L′H)₂](ClO₄)₂ has been determined by the single crystal X-ray diffraction studies. The molecular structure shows that Ru(II) is at the center of inversion of an octahedron with N₄P₂ coordination sphere. The ligand acts as a bidentate N,N′donor. The electronic spectra of the complexes display intense MLCT bands in the visible region.Cyclic voltammetric studies show quasi-reversible oxidative response at 0.99-1.32 V (vs Ag/AgCl reference electrode) due to Ru(III)/Ru(II) couple.     

TTF charge transfer salts containing cyanometallate anions [M(phen)(CN)4] (M = Cr or Fe; phen = 1,10-phenanthroline)

Two new charge transfer salts of TTF with the counter anions [M(phen)(CN)₄]⁻ (phen = 1,10-phenanthroline, M = Cr (I) and Fe (II)) are described. The structures consist of alternating stacks of dimerised TTF⁺ cations and [M(phen)(CN)₄]⁻ anions and they are linked together by many short S?S contacts and hydrogen bonds. Within the organic stack, two dimerised TTF⁺ cations are arranged in a slipped face-to-face mode with short intra-dimer and long inter-dimer S?S distances. Strong antiferromagnetic exchange was found in the TTF⁺ dimers. Conductivity measurements show that compound I is a semiconductor.     

Structural analysis and magnetic properties of the copper(II) dicyanamide complexes [Cu2(dmphen)2(dca)4], [Cu(dmphen)(dca)(NO3)]n and [Cu(4,4-dmbpy)(H2O)(dca)2] (dca=dicyanamide; dmphen=2,9-dimethyl-1,10-phenanthroline; 4,4-dmbpy=4,4-dimethyl-2,2-bipyridine)

The preparation, crystal structures and magnetic properties of three copper(II) compounds of formulae [Cu₂(dmphen)₂(dca)₄] (1), [Cu(dmphen)(dca)(NO₃)]_n (2) and [Cu(4,4^′-dmbpy)(H₂O)(dca)₂] (3) (dmphen=2,9-dimethyl-1,10-phenanthroline, dca=dicyanamide and 4,4^′-dmbpy=4,4^′-dimethyl-2,2^′-bipyridine) are reported. The structure of 1 consists of discrete copper(II) dinuclear units with double end-to-end dca bridges whereas that of 2 is made up of neutral uniform copper(II) chains with a single symmetrical end-to-end dca bridge. Each copper atom in 1 and 2 is in a distorted square pyramidal environment: two (1) or one (2) nitrile-nitrogen atoms from bridging dca groups, one of the nitrogen atoms of the dmphen molecule (1 and 2) and either one nitrile-nitrogen from a terminal dca ligand (1) or a nitrate-oxygen atom (2) build the equatorial plane whereas the second nitrogen atom of the heterocyclic dmphen fills the axial position (1 and 2). The copper-copper separations through double (1) and single (2) end-to-end dca bridges are 7.1337(7) (1) and 7.6617(7) (2). Compound 3 is a mononuclear copper(II) complex whose structure contains two neutral and crystallographically independent [Cu(4,4^′-dmbpy)(H₂O)(dca)₂] molecules which are packed in two different layer arrangements running parallel to the bc-plane and alternating along the a-axis. The copper atoms in both molecules have slightly distorted square pyramidal surroundings with the two nitrogen atoms of the 4,4^′-dmbpy ligand and two dca nitrile-nitrogen atoms in the basal plane and a water oxygen in the apical position. A semi co-ordinated dca nitrile-nitrogen from a neighbour unit [2.952(6) Å for Cu(2)-N] is in trans position to the apical water molecule in one of the two molecules, this feature representing part of the difference in supramolecular connections in the alternating layers referred to above. Magnetic susceptibility measurements for 1-3 in the temperature range 1.9-290 K reveal the occurrence of weak antiferromagnetic interactions through double [J=−3.3 cm⁻¹ (1), ] and single [J=−0.57 cm⁻¹ (2), ] dca bridges and across intermolecular contacts [θ=−0.07 K (3)].     

Octahedral nickel(II) hexamethyleneimine-dithiocarbamato complexes involving bidentate N,N-donor ligands

The nickel(II) complexes of the compositions [Ni(hmidtc)(bpy)₂]ClO₄ (I), [Ni(hmidtc)(phen)₂]ClO₄ (II), [Ni(hmidtc)(phen)₂]SCN (III), [Ni(hmidtc)(phen)₂]PF₆ (IV), [Ni(hmidtc)(phen)₂]BPh₄ (V), [Ni(hmidtc)(phen)₂]AcO·2H₂O (VI) and [Ni(hmidtc)(phen)₂]Br·H₂O (VII), involving a combination of one hexamethyleneimine-dithiocarbamate anion (hmidtc) and two bidentate N,N-donor ligands (2,2′-bipyridine (bpy) for I or 1,10-phenanthroline (phen) for II-VII), have been prepared. The compounds were characterized by elemental analysis, molar conductivity measurements, UV-Vis and IR spectroscopy, magnetochemical measurements and thermal analysis. A single-crystal X-ray analysis of the complex I revealed a distorted octahedral geometry with the nickel(II) ion coordinated by four nitrogen atoms (from two bidentate-coordinated bpy molecules) and two sulfur atoms (from one bidentate-coordinated hmidtc anion), together giving an NiN₄S₂ donor set.     

New palladacyclic complexes with pyridylphosphine ligands: crystal structures of [Pd(Azb)(Ph2POCH2Py-P,N)][PF6] and [Pd(Phpy)(Ph2PNHPy-P,N)][PF6]

The synthesis of palladacyclic derivatives with the hybrid pyridylphosphine ligands Py(CH₂)OPPh₂ (a) and PyNHPPh₂ (b) in a neutral P,N-chelating coordination mode has been achieved. Treatment of selected chloride-bridged cyclometallated precursors [Pd(C^∧N)(μ-Cl)]₂ [C^∧N = 2-pyridinin-phenyl Phpy, I-compounds; 7,8-benzoquinolyl Bzq, II-compounds; phenylazophenyl Azb, III-compounds or 2-(2-oxazolinyl)phenyl Phox, IV-compounds] with a or b in the presence of stoichiometric KPF₆ gave the mononuclear derivatives Ia-IVa and Ib-IVb. The crystal structures of compounds [Pd(Azb)(Ph₂POCH₂Py-P,N)][PF₆] (IIIa) and [Pd(Phpy)(Ph₂PNHPy-P,N)][PF₆] (Ib) have been determined. The new palladacyclopentadiene precursor [Pd{C₄COOMe₄}(CH₃CN)₂] (V) has been prepared starting from the polymeric complex [Pd{C₄COOMe₄}]_n. Its usefulness in the preparation of new derivatives has been tested by means of the straightforward reaction with ligands (a) or (b) to give mononuclear compounds [Pd{C₄(COOMe)₄}(Ph₂POCH₂Py-P,N)] (Va) and [Pd{C₄(COOMe)₄}(Ph₂PNHPy-P,N)] (Vb). The reactions of hydroxo-bridged precursors [Pd(C^∧N)(μ-OH)]₂ or [Pd₂{C₄(COOMe)₄}₂ (μ-OH)₂][NBu₄]₂ with PyNHPPh₂ afforded mononuclear complexes Ic-Vc in which a less common anionic P,N-binding mode is forced as a result of ligand deprotonation. The new complexes were characterised by partial elemental analyses and spectroscopic methods (IR, FAB, ¹H and ³¹P{¹H} NMR).     

A new example of a tetranuclear iron(III) cluster containing the [Fe4O2] core: preparation, X-ray crystal structure, magnetochemistry and Mössbauer study of [Fe4O2(O2CMe)6(N3)2(phen)2]

Two synthetic procedures have been employed that allow access to the new tetranuclear cluster [Fe₄O₂(O₂CMe)₆(N₃)₂(phen)₂] (1), where phen is 1,10-phenanthroline. Complex 1 · 3MeCN displays an unusual structural asymmetry (observed for the second time) in its [Fe₄O₂]⁸⁺ core that can be considered as a hybrid of the bent (butterfly) and planar dispositions of four metal ions seen previously in such compounds with transition metals. Complex 1 has been characterized by variable-temperature magnetic susceptibility studies, and by IR and variable-temperature ⁵⁷Fe Mössbauer spectroscopies. Magnetochemical data reveal a diamagnetic ground state (S=0) with antiferromagnetic body-body and body-wingtip interactions between the iron(III) ions of the butterfly core (J_bb=−11 cm⁻¹, J_wb=−70 cm⁻¹). Magnetochemical and Mössbauer studies on 1 show that its structural asymmetry has practically no influence on these properties compared with the more symmetric types.     

Selective synthesis of triangular cluster oxido-sulfidocomplexes of Mo and W: High yield preparations of [Mo3O2S2(H2O)9], [W3O2S2(H2O)9], [W2MoO2S2(H2O)9] and their derivatization

Reaction of [Mo₂O₂(μ-S)₂(H₂O)₆]²⁺ with Mo(CO)₆ or metallic Mo under hydrothermal conditions (140 °C, 4 M HCl) gives oxido-sulfido cluster aqua complex [Mo₃(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (1). Similarly, [W₃(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (2) is obtained from [W₂O₂(μ-S)₂(H₂O)₆]²⁺ and W(CO)₆. While reaction of [Mo₂O₂(μ-S)₂(H₂O)₆]²⁺ with W(CO)₆ mainly proceeds as simple reduction to give 1, [W₂O₂(μ-S)₂(H₂O)₆]²⁺ with Mo(CO)₆ produces new mixed-metal cluster [W₂Mo(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (3) as main product. From solutions of 1 in HCl supramolecular adduct with cucurbit[6]uril (CB[6]) {[Mo₃O₂S₂(H₂O)₆Cl₃]₂CB[6]}Cl₂⋅18H₂O (4) was isolated and structurally characterized. The aqua complexes were converted into acetylacetonates [M₃O₂S₂(acac)₃(py)₃]PF₆ (M₃ = Mo₃, W₃, W₂Mo; 5a-c), which were characterized by X-ray single crystal analysis, electrospray ionization mass spectrometry and ¹H NMR spectroscopy. Crystal structure of (H₅O₂)(Me₄N)₄[W₃(μ₃-S)(μ₂-S)(μ₂-O)₂(NCS)₉] (6), obtained from 2, is also reported.     

Synthesis and characterization of new AMTTO-imine-ligands and their silver(I) complexes: crystal structures of TAMTTO, [Ag2(TAMMTO)4](NO3)2 · 4MeOH, [Ag(TAMTTO)(PPh3)2]NO3 · 1.5THF, [Ag(FAMTTO)(PPh3)2]NO3

Reaction of 4-amino-6-methyl-1,2,4-triazin-thione-5-one (AMTTO, 1) with 2-thiophenecarboxaldehyde and 2-furaldehyde led to the corresponding iminic compounds 6-methyl-4-[thiophene-2-yl-methylene-amino]-3-thioxo-[1,2,4]-triazin-3,4-dihydro(2H)-5-one (TAMTTO, 2) and 4-[furan-2-yl-methylene-amino]-6-methyl-3-thioxo-[1,2,4]-triazin-3,4-dihydro(2H)-5-one (FAMTTO, 3). Treatment of 2 with AgNO₃ gave the complex [Ag₂(TAMMTO)₄](NO₃)₂ · 4MeOH (4) and of 2 and 3 with [Ag(PPh₃)₂]NO₃ gave the complexes [Ag(TAMTTO)(PPh₃)₂]NO₃ · 1.5THF (5) and [Ag(FAMTTO)(PPh₃)₂]NO₃ (6), respectively. All the compounds have been characterized by elemental analyses, IR spectroscopy and mass spectrometry. Compound 2 and all the complexes have been characterized by X-ray diffraction studies, respectively. In addition, 5 and 6 have been characterized by ³¹P NMR spectroscopy. Crystal data for 2 at −80 °C: monoclinic, space group C2/c, a=2319.6(2), b=609.8(1), c=1673.6(2) pm, β=106.14(1)°, Z=8, R₁=0.0523; for 4 at −80 °C: triclinic, space group , a=877.6(1), b=1085.2(1), c=1557.7(2) pm, α=77.14(1)°, β=80.87(1)°, γ=78.18(1)°, Z=1, R₁=0.0407; for 5 at 20 °C: triclinic, space group , a=1151.1(2), b=1225.1(2), c=1887.4(3) pm, α=78.04(1)°, β=86.20(1)°, γ=76.03(1)°, Z=2, R₁=0.0662; for 6 at −80 °C: triclinic, space group , a=1189.7(2), b=1387.8(2), c=1410.9(2) pm, α=94.74(2)°, β=95.12(2)°, γ=112.41(2)°, Z=2, R₁=0.0511.