A conformational switch in vinculin drives formation and dynamics of a talin-vinculin complex at focal adhesions

Dynamic interactions between the cytoskeleton and integrins control cell adhesion, but regulatory mechanisms remain largely undefined. Here, we tested the extent to which the autoinhibitory head-tail interaction (HTI) in vinculin regulates formation and lifetime of the talin-vinculin complex, a proposed mediator of integrin-cytoskeleton bonds. In an ectopic recruitment assay, mutational reduction of HTI drove assembly of talin-vinculin complexes, whereas ectopic complexes did not form between talin and wild-type vinculin. Moreover, reduction of HTI altered the dynamic assembly of vinculin and talin in focal adhesions. Using fluorescence recovery after photobleaching, we show that the focal adhesion residency time of vinculin was enhanced up to 3-fold by HTI mutations. The slow dynamics of vinculin correlated with exposure of its cryptic talin-binding site, and a talin-binding site mutation rescued the dynamics of activated vinculin. Significantly, HTI-deficient vinculin inhibited the focal adhesion dynamics of talin, but not paxillin or alpha-actinin. These data show that talin conformation in cells permits vinculin binding, whereas the autoinhibited conformation of vinculin constitutes the barrier to complex formation. Down-regulation of HTI in vinculin to Kd approximately 10(-7) is sufficient to induce talin binding, and HTI is essential to the dynamics of vinculin and talin at focal adhesions. We therefore conclude that vinculin conformation, as modulated by the strength of HTI, directly regulates the formation and lifetime of talin-vinculin complexes in cells.     

Vinculin Is a Dually Regulated Actin Filament Barbed End-capping and Side-binding Protein

The focal adhesion protein vinculin is an actin-binding protein involved in the mechanical coupling between the actin cytoskeleton and the extracellular matrix. An autoinhibitory interaction between the N-terminal head (Vh) and the C-terminal tail (Vt) of vinculin masks an actin filament side-binding domain in Vt. The binding of several proteins to Vh disrupts this intramolecular interaction and exposes the actin filament side-binding domain. Here, by combining kinetic assays and microscopy observations, we show that Vt inhibits actin polymerization by blocking the barbed ends of actin filaments. In low salt conditions, Vt nucleates actin filaments capped at their barbed ends. We determined that the interaction between vinculin and the barbed end is characterized by slow association and dissociation rate constants. This barbed end capping activity requires C-terminal amino acids of Vt that are dispensable for actin filament side binding. Like the side-binding domain, the capping domain of vinculin is masked by an autoinhibitory interaction between Vh and Vt. In contrast to the side-binding domain, the capping domain is not unmasked by the binding of a talin domain to Vh and requires the dissociation of an additional autoinhibitory interaction. Finally, we show that vinculin and the formin mDia1, which is involved in the processive elongation of actin filaments in focal adhesions, compete for actin filament barbed ends.     

Structural basis for amplifying vinculin activation by talin

Talin interactions with vinculin are essential for focal adhesions. Curiously, talin contains three noncontiguous vinculin binding sites (VBS) that can bind individually to the vinculin head (Vh) domain. Here we report the crystal structure of the human Vh.VBS1 complex, a validated model of the Vh.VBS2 structure, and biochemical studies that demonstrate that all of talin VBSs activate vinculin by provoking helical bundle conversion of the Vh domain, which displaces the vinculin tail (Vt) domain. Thus, helical bundle conversion is a structurally conserved response in talin-vinculin interactions. Furthermore, talin VBSs bind to Vh in a mutually exclusive manner but do differ in their affinity for Vh and in their ability to displace Vt, suggesting that the strengths of these interactions could lead to differences in signaling outcome. These findings support a model in which talin binds to and activates multiple vinculin molecules to provoke rapid reorganization of the actin cytoskeleton.     

Activation of vinculin induced by cholinergic stimulation regulates contraction of tracheal smooth muscle tissue

Vinculin localizes to membrane adhesion junctions where it links actin filaments to the extracellular matrix by binding to the integrin-binding protein talin at its head domain (Vh) and to actin filaments at its tail domain (Vt). Vinculin can assume an inactive (closed) conformation in which Vh and Vt bind to each other, masking the binding sites for actin and talin, and an active (open) conformation in which the binding sites for talin and actin are exposed. We hypothesized that the contractile activation of smooth muscle tissues might regulate the activation of vinculin and thereby contribute to the regulation of contractile tension. Stimulation of tracheal smooth muscle tissues with acetylcholine (ACh) induced the recruitment of vinculin to cell membrane and its interaction with talin and increased the phosphorylation of membrane-localized vinculin at the C-terminal Tyr-1065. Expression of recombinant vinculin head domain peptide (Vh) in smooth muscle tissues, but not the talin-binding deficient mutant head domain, VhA50I, inhibited the ACh-induced recruitment of endogenous vinculin to the membrane and the interaction of vinculin with talin and also inhibited vinculin phosphorylation. Expression of Vh peptide also inhibited ACh-induced smooth muscle contraction and inhibited ACh-induced actin polymerization; however, it did not affect myosin light chain phosphorylation, which is necessary for cross-bridge cycling. Inactivation of RhoA inhibited vinculin activation in response to ACh. We conclude that ACh stimulation regulates vinculin activation in tracheal smooth muscle via RhoA and that vinculin activation contributes to the regulation of active tension by facilitating connections between actin filaments and talin-integrin adhesion complexes and by mediating the initiation of actin polymerization.     

Coincidence of actin filaments and talin is required to activate vinculin

Vinculin regulates cell adhesion by strengthening contacts between extracellular matrix and the cytoskeleton. Binding of the integrin ligand, talin, to the head domain of vinculin and F-actin to its tail domain is a potential mechanism for this function, but vinculin is autoinhibited by intramolecular interactions between its head and tail domain and must be activated to bind talin and actin. Because autoinhibition of vinculin occurs by synergism between two head and tail interfaces, one hypothesis is that activation could occur by two ligands that coordinately disrupt both interfaces. To test this idea we use a fluorescence resonance energy transfer probe that reports directly on activation of vinculin. Neither talin rod, VBS3 (a talin peptide that mimics a postulated activated state of talin), nor F-actin alone can activate vinculin. But in the presence of F-actin either talin rod or VBS3 induces dose-dependent activation of vinculin. The activation data are supported by solution phase binding studies, which show that talin rod or VBS3 fails to bind vinculin, whereas the same two ligands bind tightly to vinculin head domain (K(d) approximately 100 nM). These data strongly support a combinatorial mechanism of vinculin activation; moreover, they are inconsistent with a model in which talin or activated talin is sufficient to activate vinculin. Combinatorial activation implies that at cell adhesion sites vinculin is a coincidence detector awaiting simultaneous signals from talin and actin polymerization to unleash its scaffolding activity.     

A vinculin binding domain from the talin rod unfolds to form a complex with the vinculin head

The cytoskeletal protein talin plays a key role in activating integrins and in coupling them to the actin cytoskeleton. Its N-terminal globular head, which binds beta integrins, is linked to an extended rod having a C-terminal actin binding site and several vinculin binding sites (VBSs). The NMR structure of residues 755-889 of the rod (containing a VBS) is shown to be an amphipathic four-helix bundle with a left-handed topology. A talin peptide corresponding to the VBS binds the vinculin head; the X-ray crystallographic structure of this complex shows that the residues which interact with vinculin are buried in the hydrophobic core of the talin fragment. NMR shows that the interaction involves a major structural change in the talin fragment, including unfolding of one of its helices, making the VBS accessible to vinculin. Interestingly, the talin 755-889 fragment binds more than one vinculin head molecule, suggesting that the talin rod may contain additional as yet unrecognized VBSs.     

WAVE2 regulates high-affinity integrin binding by recruiting vinculin and talin to the immunological synapse

T-cell-receptor (TCR)-mediated integrin activation is required for T-cell-antigen-presenting cell conjugation and adhesion to extracellular matrix components. While it has been demonstrated that the actin cytoskeleton and its regulators play an essential role in this process, no mechanism has been established which directly links TCR-induced actin polymerization to the activation of integrins. Here, we demonstrate that TCR stimulation results in WAVE2-ARP2/3-dependent F-actin nucleation and the formation of a complex containing WAVE2, ARP2/3, vinculin, and talin. The verprolin-connecting-acidic (VCA) domain of WAVE2 mediates the formation of the ARP2/3-vinculin-talin signaling complex and talin recruitment to the immunological synapse (IS). Interestingly, although vinculin is not required for F-actin or integrin accumulation at the IS, it is required for the recruitment of talin. In addition, RNA interference of either WAVE2 or vinculin inhibits activation-dependent induction of high-affinity integrin binding to VCAM-1. Overall, these findings demonstrate a mechanism in which signals from the TCR produce WAVE2-ARP2/3-mediated de novo actin polymerization, leading to integrin clustering and high-affinity binding through the recruitment of vinculin and talin.     

Structural and dynamic characterization of a vinculin binding site in the talin rod

Talin is a key protein involved in linking integrins to the actin cytoskeleton. The long flexible talin rod domain contains a number of binding sites for vinculin, a cytoskeletal protein important in stabilizing integrin-mediated cell-matrix junctions. Here we report the solution structure of a talin rod polypeptide (residues 1843-1973) which contains a single vinculin binding site (VBS; residues 1944-1969). Like other talin rod polypeptides, it consists of a helical bundle, in this case a four-helix bundle with a right-handed topology. The residues in the VBS important for vinculin binding were identified by studying the binding of a series of VBS-related peptides to the vinculin Vd1 domain. The key binding determinants are buried in the interior of the helical bundle, suggesting that a substantial structural change in the talin polypeptide is required for vinculin binding. Direct evidence for this was obtained by NMR and EPR spectroscopy. [1H,15N]-HSQC spectra of the talin fragment indicate that vinculin binding caused approximately two-thirds of the protein to adopt a flexible random coil. For EPR spectroscopy, nitroxide spin labels were attached to the talin polypeptide via appropriately located cysteine residues. Measurements of inter-nitroxide distances in doubly spin-labeled protein showed clearly that the helical bundle is disrupted and the mobility of the helices, except for the VBS helix, is markedly increased. Binding of vinculin to talin is thus a clear example of the unusual phenomenon of protein unfolding being required for protein/protein interaction.     

Talin binds to actin and promotes filament nucleation

Platelet talin binds to actin in vitro and hence is an actin binding protein. By four different non-interfering assay conditions (fluorescence, fluorescence recovery after photobleaching, (FRAP), dynamic light scattering and DNase-I inhibition) we show that talin promotes filament nucleation, raises the filament number concentration and increases the net rate of actin polymerization but has no inhibitory effect on filament elongation. Binding of talin to actin occurs at a maximal molar ratio of 1:3 as determined by fluorescencetitration under G-buffer conditions. The overall binding constant was approximately 0.25 microM.     

Mapping and consensus sequence identification for multiple vinculin binding sites within the talin rod

The interaction between the cytoskeletal proteins talin and vinculin plays a key role in integrin-mediated cell adhesion and migration. Three vinculin binding sites (VBS1-3) have previously been identified in the talin rod using a yeast two-hybrid assay. To extend these studies, we spot-synthesized a series of peptides spanning all the alpha-helical regions predicted for the talin rod and identified eight additional VBSs, two of which overlap key functional regions of the rod, including the integrin binding site and C-terminal actin binding site. The talin VBS alpha-helices bind to a hydrophobic cleft in the N-terminal vinculin Vd1 domain. We have defined the specificity of this interaction by spot-synthesizing a series of 25-mer talin VBS1 peptides containing substitutions with all the commonly occurring amino acids. The consensus for recognition is LXXAAXXVAXX- VXXLIXXA with distinct classes of hydrophobic side chains at positions 1, 4, 5, 8, 9, 12, 15, and 16 required for vinculin binding. Positions 1, 8, 12, 15, and 16 require an aliphatic residue and will not tolerate alanine, whereas positions 4, 5, and 9 are less restrictive. These preferences are common to all 11 VBS sequences with a minor variation occurring in one case. A crystal structure of this variant VBS peptide in complex with the vinculin Vd1 domain reveals a subtly different mode of vinculin binding.     

Crystal structure of vinculin in complex with vinculin binding site 50 (VBS50), the integrin binding site 2 (IBS2) of talin

The cytoskeletal protein talin activates integrin receptors by binding of its FERM domain to the cytoplasmic tail of β‐integrin. Talin also couples integrins to the actin cytoskeleton, largely by binding to and activating the cytoskeletal protein vinculin, which binds to F‐actin through the agency of its five‐helix bundle tail (Vt) domain. Talin activates vinculin by means of buried amphipathic α‐helices coined vinculin binding sites (VBSs) that reside within numerous four‐ and five‐helix bundle domains that comprise the central talin rod, which are released from their buried locales by means of mechanical tension on the integrin:talin complex. In turn, these VBSs bind to the N‐terminal seven‐helix bundle (Vh1) domain of vinculin, creating an entirely new helix bundle that severs its head‐tail interactions. Interestingly, talin harbors a second integrin binding site coined IBS2 that consists of two five‐helix bundle domains that also contain a VBS (VBS50). Here we report the crystal structure of VBS50 in complex with vinculin at 2.3 Å resolution and show that intramolecular interactions of VBS50 within IBS2 are much more extensive versus its interactions with vinculin. Indeed, the IBS2‐vinculin interaction only occurs at physiological temperature and the affinity of VBS50 for vinculin is about 30 times less than other VBSs. The data support a model where integrin binding destabilizes IBS2 to allow it to bind to vinculin.     

The domain structure of talin: Residues 1815-1973 form a five-helix bundle containing a cryptic vinculin-binding site

Talin is a large flexible rod-shaped protein that activates the integrin family of cell adhesion molecules and couples them to cytoskeletal actin. Its rod region consists of a series of helical bundles. Here we show that residues 1815-1973 form a 5-helix bundle, with a topology unique to talin which is optimally suited for formation of a long rod such as talin. This is much more stable than the 4-helix (1843-1973) domain described earlier and as a result its vinculin binding sequence is inaccessible to vinculin at room temperature, with implications for the overall mechanism of the talin-vinculin interaction.

Structured summary

MINT-7722300, MINT-7760951: Talin-1 (uniprotkb:P26039) and Vinculin (uniprotkb:P12003) bind (MI:0407) by molecular sieving (MI:0071)     

The vinculin binding sites of talin and alpha-actinin are sufficient to activate vinculin

Vinculin regulates both cell-cell and cell-matrix junctions and anchors adhesion complexes to the actin cytoskeleton through its interactions with the vinculin binding sites of alpha-actinin or talin. Activation of vinculin requires a severing of the intramolecular interactions between its N- and C-terminal domains, which is necessary for vinculin to bind to F-actin; yet how this occurs in cells is not resolved. We tested the hypothesis that talin and alpha-actinin activate vinculin through their vinculin binding sites. Indeed, we show that these vinculin binding sites have a high affinity for full-length vinculin, are sufficient to sever the head-tail interactions of vinculin, and they induce conformational changes that allow vinculin to bind to F-actin. Finally, microinjection of these vinculin binding sites specifically targets vinculin in cells, disrupting its interactions with talin and alpha-actinin and disassembling focal adhesions. In their native (inactive) states the vinculin binding sites of talin and alpha-actinin are buried within helical bundles present in their central rod domains. Collectively, these results support a model where the engagement of adhesion receptors first activates talin or alpha-actinin, by provoking structural changes that allow their vinculin binding sites to swing out, which are then sufficient to bind to and activate vinculin.     

Structural and biophysical properties of the integrin-associated cytoskeletal protein talin

Talin is a large cytoskeletal protein (2541 amino acid residues) which plays a key role in integrin-mediated events that are crucial for cell adhesion, migration, proliferation and survival. This review summarises recent work on the structure of talin and on some of the structurally better defined interactions with other proteins. The N-terminal talin head (approx. 50 kDa) consists of an atypical FERM domain linked to a long flexible rod (approx. 220 kDa) made up of a series of amphipathic helical bundle domains. The F3 FERM subdomain in the head binds the cytoplasmic tail of integrins, but this interaction can be inhibited by an interaction of F3 with a helical bundle in the talin rod, the so-called “autoinhibited form” of the molecule. The talin rod contains a second integrin-binding site, at least two actin-binding sites and a large number of binding sites for vinculin, which is important in reinforcing the initial integrin–actin link mediated by talin. The vinculin binding sites are defined by hydrophobic residues buried within helical bundles, and these must unfold to allow vinculin binding. Recent experiments suggest that this unfolding may be mediated by mechanical force exerted on the talin molecule by actomyosin contraction.     

Intermolecular versus intramolecular interactions of the vinculin binding site 33 of talin

The cytoskeletal proteins talin and vinculin are localized at cell‐matrix junctions and are key regulators of cell signaling, adhesion, and migration. Talin couples integrins via its FERM domain to F‐actin and is an important regulator of integrin activation and clustering. The 220 kDa talin rod domain comprises several four‐ and five‐helix bundles that harbor amphipathic α‐helical vinculin binding sites (VBSs). In its inactive state, the hydrophobic VBS residues involved in binding to vinculin are buried within these helix bundles, and the mechanical force emanating from bound integrin receptors is thought necessary for their release and binding to vinculin. The crystal structure of a four‐helix bundle of talin that harbors one of these VBSs, coined VBS33, was recently determined. Here we report the crystal structure of VBS33 in complex with vinculin at 2 Å resolution. Notably, comparison of the apo and vinculin bound structures shows that intermolecular interactions of the VBS33 α‐helix with vinculin are more extensive than the intramolecular interactions of the VBS33 within the talin four‐helix bundle.     

α-Catenin uses a novel mechanism to activate vinculin

Vinculin, an actin-binding protein, is emerging as an important regulator of adherens junctions. In focal-adhesions, vinculin is activated by simultaneous binding of talin to its head domain and actin filaments to its tail domain. Talin is not present in adherens junctions. Consequently, the identity of the ligand that activates vinculin in cell-cell junctions is not known. Here we show that in the presence of F-actin, α-catenin, a cytoplasmic component of the cadherin adhesion complex, activates vinculin. Direct binding of α-catenin to vinculin is critical for this event because a point mutant (α-catenin L344P) lacking high affinity binding does not activate vinculin. Furthermore, unlike all known vinculin activators, α-catenin binds to and activates vinculin independently of an A50I substitution in the vinculin head, a mutation that inhibits vinculin binding to talin and IpaA. Collectively, these data suggest that α-catenin employs a novel mechanism to activate vinculin and may explain how vinculin is differentially recruited and/or activated in cell-cell and cell-matrix adhesions.     

Vinculin activation is necessary for complete talin binding

Focal adhesions are critical to a number of cellular processes that involve mechanotransduction and mechanical interaction with the cellular environment. The growth and strengthening of these focal adhesions is dependent on the interaction between talin and vinculin. This study investigates said interaction and how vinculin activation influences it. Using molecular dynamics, the interaction between talin's vinculin binding site (VBS) and vinculin's domain 1 (D1) is simulated both before and after vinculin activation. The simulations of VBS binding to vinculin before activation suggest the proximity of the vinculin tail to D1 prevents helical movement in D1 and thus prevents binding of VBS. In contrast, interaction of VBS with activated vinculin shows the possibility of complete VBS insertion into D1. In the simulations of both activated and autoinhibited vinculin where VBS fails to fully bind, VBS demonstrates significant hydrophobic interaction with surface residues in D1. These interactions link VBS to D1 even without its proper insertion into the hydrophobic core. Together these simulations suggest VBS binds to vinculin with the following mechanism: 1), VBS links to D1 via surface hydrophobic interactions; 2), vinculin undergoes activation and D1 is moved away from the vinculin tail; 3), helices in D1 undergo conformational change to allow VBS binding; and 4), VBS inserts itself into the hydrophobic core of D1.     

Vinculin Phosphorylation at Tyr1065 Regulates Vinculin Conformation and Tension Development in Airway Smooth Muscle Tissues

Vinculin localizes to membrane adhesion junctions in smooth muscle tissues, where its head domain binds to talin and its tail domain binds to filamentous actin, thus linking actin filaments to the extracellular matrix. Vinculin can assume a closed conformation, in which the head and tail domains bind to each other and mask the binding sites for actin and talin, and an open activated conformation that exposes the binding sites for talin and actin. Acetylcholine stimulation of tracheal smooth muscle tissues induces the recruitment of vinculin to the cell membrane and its interaction with talin and actin, which is required for active tension development. Vinculin phosphorylation at Tyr¹⁰⁶⁵ on its C terminus increases concurrently with tension development in tracheal smooth muscle tissues. In the present study, the role of vinculin phosphorylation at Tyr¹⁰⁶⁵ in regulating the conformation and function of vinculin during airway smooth muscle contraction was evaluated. Vinculin constructs with point mutations at Tyr¹⁰⁶⁵ (vinculin Y1065F and vinculin Y1065E) and vinculin conformation-sensitive FRET probes were expressed in smooth muscle tissues to determine how Tyr¹⁰⁶⁵ phosphorylation affects smooth muscle contraction and the conformation and cellular functions of vinculin. The results show that vinculin phosphorylation at tyrosine 1065 is required for normal tension generation in airway smooth muscle during contractile stimulation and that Tyr¹⁰⁶⁵ phosphorylation regulates the conformation and scaffolding activity of the vinculin molecule. We conclude that the phosphorylation of vinculin at tyrosine 1065 provides a mechanism for regulating the function of vinculin in airway smooth muscle in response to contractile stimulation.     

A Molecular Dynamics Investigation of Vinculin Activation

Vinculin activation plays a critical role in focal adhesion initiation and formation. In its native state, vinculin is in an autoinhibitory conformation in which domain 1 prevents interaction of the vinculin tail domain with actin by steric hindrance. Once activated, vinculin is able to interact with both actin and talin. Several hypotheses have been put forth addressing the mechanisms of vinculin activation. One set of studies suggests that vinculin interaction with talin is sufficient to cause activation, whereas another set of studies suggests that a simultaneous interaction with several binding partners is necessary to achieve vinculin activation. Using molecular-dynamics (MD) simulations, we investigate the mechanisms of vinculin activation and suggest both a trajectory of conformational changes leading to vinculin activation, and key structural features that are likely involved in stabilizing the autoinhibited conformation. Assuming that the simultaneous interaction of vinculin with both actin and talin causes a stretching force on vinculin, and that vinculin activation results from a removal of steric hindrance blocking the actin-binding sites, we simulate with MD the stretching and activation of vinculin. The MD simulations are further confirmed by normal-mode analysis and simulation after residue modification. Taken together, the results of these simulations suggest that bending of the vinculin-binding-site region in vinculin away from the vinculin tail is the likely trajectory of vinculin activation.