Cause analysis of the effects of acid-catalyzed steam-exploded corn stover prehydrolyzate on ethanol fermentation by Pichia stipitis CBS 5776

The prehydrolyzate obtained from acid-catalyzed steam-exploded corn stover (ASC) mainly contains xylose and a number of inhibitory compounds that inhibit ethanol fermentation by Pichia stipitis. In this study, the effects of the ASC prehydrolyzate, specifically those of the carbohydrate-degradation products, lignin-degradation products (which were extracted from ASC prehydrolyzate using ethyl acetate), and six major phenolic compounds (added to pure-sugar media individually or in combination), on ethanol fermentation were investigated. Results indicate that the effects of the carbohydrate-degradation products were negligible (10 h delayed) compared with those of pure-sugar fermentation, whereas the effects of the lignin-degradation products were significant (52 h delayed). Meanwhile, the inhibitory effects of the major phenolic compounds were not caused by certain types of inhibitors, but were due to the synergistic effects of various inhibitors.     

Production of Fermentable Sugars and Hydrogen-Rich Gas from <Emphasis Type="Italic">Agave tequilana</Emphasis> Biomass

The Mexican tequila industry annually processes approximately 1 × 10⁶ Agave tequilana plants, generating approximately 1.78 × 10⁸ kg of bagasse per year. This biomass is considered an attractive alternative to fossil fuels as an energy source and to produce biofuels and/or chemical products because it is produced and used without adversely affecting the environment. The first aim of the present work was to determine the effect of temperature, the concentration of H₂SO_4, and reaction time on the hydrolysis of agave bagasse to maximize the fermentable sugars using a steam explosion. This step process generated 71.11 g/L of reducible sugars in the supernatant (59.29 % glucose, 29.05 % xylose, and 11.66 % fructose) and unconverted organic matter of enzymatic hydrolysis bagasse (35.4 % α-cellulose, 7.33 % hemicellulose, 49.91 % lignin, and 7.31 % ashes). A mathematical surface response analysis of the hydrolysis was used for process optimization. The second aim involves the study of the thermodynamics of the reforming of unconverted organic matter from enzymatic hydrolysis of Agave tequilana bagasse (ATB) evaluated by the Gibbs free energy minimization method for hydrogen production. The effect of the parameters on the system performance measures, such as reaction temperature (T), Water/Biomass ratio (WBR), and pressure (P), were also investigated. The maximum H₂ production obtained was 23.2 mol of H₂/271.5 g ATB with a WBR ≥ 11 and a temperature of 740 °C. These findings indicate that the temperature and WBR are essential factors in the production of H₂, which was reflected in the efficiency of the process.     

Optimization of pineapple pulp residue hydrolysis for lipid production by Rhodotorula glutinis TISTR5159 using as biodiesel feedstock

The higher lipid productivity of Rhodotorula glutinis TISTR5159 was achieved by optimizing the pineapple pulp hydrolysis for releasing the high sugars content. The sequential simplex method operated by varied; solid-to-liquid ratio, sulfuric acid concentration, temperature, and hydrolysis time were successfully applied and the highest sugar content (83.2 g/L) evaluated at a solid-to-liquid ratio of 1:10.8, 3.2% sulfuric acid, 105 °C for 13.9 min. Moreover, the (NH₄)₂SO₄ supplement enhanced the lipid productivity and gave the maximum yields of biomass and lipid of 15.2 g/L and 9.15 g/L (60.2%), respectively. The C16 and C18 fatty acids were found as main components included oleic acid (55.8%), palmitic acid (16.6%), linoleic acid (11.9%), and stearic acid (7.8%). These results present the possibility to convert the sugars in pineapple pulp hydrolysate to lipids. The fatty acid profile was also similar to vegetable oils. Thus, it could be used as potential feedstock for biodiesel production.     

Production of bio-fuel ethanol from distilled grain waste eluted from Chinese spirit making process

Distilled grain waste eluted from Chinese spirit making is rich in carbohydrates, and could potentially serve as feedstock for the production of bio-fuel ethanol. Our study evaluated two types of saccharification methods that convert distilled grain waste to monosaccharides: enzymatic saccharification and concentrated H₂SO₄ saccharification. Results showed that enzymatic saccharification performed unsatisfactorily because of inefficient removal of lignin during pretreatment. Concentrated H₂SO₄ saccharification led to a total sugar recovery efficiency of 79.0 %, and to considerably higher sugar concentrations than enzymatic saccharification. The process of ethanol production from distilled grain waste based on concentrated H₂SO₄ saccharification was then studied. The process mainly consisted of concentrated H₂SO₄ saccharification, solid–liquid separation, decoloration, sugar–acid separation, oligosaccharide hydrolysis, and continuous ethanol fermentation. An improved simulated moving bed system was employed to separate sugars from acid after concentrated H₂SO₄ saccharification, by which 95.8 % of glucose and 85.8 % of xylose went into the sugar-rich fraction, while 83.3 % of H₂SO₄ went into the acid-rich fraction. A flocculating yeast strain, Saccharomyces cerevisiae KF-7, was used for continuous ethanol fermentation, which produced an ethanol yield of 91.9–98.9 %, based on glucose concentration.     

Production of biobutanol from acid-pretreated corncob using Clostridium beijerinckii TISTR 1461: Process optimization studies

Corncob is a potential feedstock in Thailand that can be used for fermentable sugar production through dilute sulfuric acid pretreatment and enzymatic hydrolysis. To recover high amounts of monomeric sugars from corncob, the sulfuric pretreatment conditions were optimized by using response surface methodology with three independent variables: sulfuric acid concentration, temperature, and time. The highest response of total sugars, 48.84 g/L, was found at 122.78°C, 4.65 min, and 2.82% (v/v) H₂SO₄. With these conditions, total sugars from the confirmation experiment were 46.29 g/L, with 5.51% error from the predicted value. The hydrolysate was used as a substrate for acetone–butanol–ethanol fermentation to evaluate its potential for microbial growth. The simultaneous saccharification and fermentation (SSF) showed that C. beijerinckii TISTR 1461 can generate acetone–butanol–ethanol products at 11.64 g/L (5.29 g/L acetone, 6.26 g/L butanol, and 0.09 g/L ethanol) instantly using sugars from the hydrolysed corncob with Novozymes 50013 cellulase enzyme without an overliming process.     

Alkaline-sulfite pretreatment and use of surfactants during enzymatic hydrolysis to enhance ethanol production from sugarcane bagasse

Sugarcane bagasse is a by-product from the sugar and ethanol industry which contains approximately 70 % of its dry mass composed by polysaccharides. To convert these polysaccharides into fuel ethanol it is necessary a pretreatment step to increase the enzymatic digestibility of the recalcitrant raw material. In this work, sugarcane bagasse was pretreated by an alkaline-sulfite chemithermomechanical process for increasing its enzymatic digestibility. Na₂SO₃ and NaOH ratios were fixed at 2:1, and three increasing chemical loads, varying from 4 to 8 % m/m Na₂SO₃, were used to prepare the pretreated materials. The increase in the alkaline-sulfite load decreased the lignin content in the pretreated material up to 35.5 % at the highest chemical load. The pretreated samples presented enhanced glucose yields during enzymatic hydrolysis as a function of the pretreatment severity. The maximum glucose yield (64 %) was observed for the samples pretreated with the highest chemical load. The use of 2.5 g l^?1 Tween 20 in the hydrolysis step further increased the glucose yield to 75 %. Semi-simultaneous hydrolysis and fermentation of the pretreated materials indicated that the ethanol yield was also enhanced as a function of the pretreatment severity. The maximum ethanol yield was 56 ± 2 % for the sample pretreated with the highest chemical load. For the sample pretreated with the lowest chemical load (2 % m/m NaOH and 4 % m/m Na₂SO₃), adding Tween 20 during the hydrolysis process increased the ethanol yield from 25 ± 3 to 39.5 ± 1 %.     

Butanol production from sweet sorghum bagasse with high solids content: Part I—comparison of liquid hot water pretreatment with dilute sulfuric acid

In these studies, we pretreated sweet sorghum bagasse (SSB) using liquid hot water (LHW) or dilute H₂SO₄ (2 g L^?1) at 190°C for zero min (as soon as temperature reached 190°C, cooling was started) to reduce generation of sugar degradation fermentation inhibiting products such as furfural and hydroxymethyl furfural (HMF). The solids loading were 250–300 g L^?1. This was followed by enzymatic hydrolysis. After hydrolysis, 89.0 g L^?1 sugars, 7.60 g L^?1 acetic acid, 0.33 g L^?1 furfural, and 0.07 g L^?1 HMF were released. This pretreatment and hydrolysis resulted in the release of 57.9% sugars. This was followed by second hydrolysis of the fibrous biomass which resulted in the release of 43.64 g L^?1 additional sugars, 2.40 g L^?1 acetic acid, zero g L^?1 furfural, and zero g L^?1 HMF. In both the hydrolyzates, 86.3% sugars present in SSB were released. Fermentation of the hydrolyzate I resulted in poor acetone‐butanol‐ethanol (ABE) fermentation. However, fermentation of the hydrolyzate II was successful and produced 13.43 g L^?1 ABE of which butanol was the main product. Use of 2 g L^?1 H₂SO₄ as a pretreatment medium followed by enzymatic hydrolysis resulted in the release of 100.6–93.8% (w/w) sugars from 250 to 300 g L^?1 SSB, respectively. LHW or dilute H₂SO₄ were used to economize production of cellulosic sugars from SSB. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:960–966, 2018     

Sequential Thermochemical Hydrolysis of Corncobs and Enzymatic Saccharification of the Whole Slurry Followed by Fermentation of Solubilized Sugars to Ethanol with the Ethanologenic Strain <Emphasis Type="Italic">Escherichia coli</Emphasis> MS04

Interest in the use of corncobs as feedstock for bioethanol production is growing. This study assesses the feasibility of sequential thermochemical diluted sulfuric acid pretreatment of corncobs at moderate temperature to hydrolyze the hemicellulosic fraction, followed by enzymatic hydrolysis of the whole slurry, and fermentation of the obtained syrup. The total sugar concentration after enzymatic hydrolysis was 85.21 g/l, i.e., 86 % of the sugars were liberated from the polymeric fractions, together with a low amount of furfural (0.26 g/l) and 4.01 g/l of acetic acid. The syrups, which contained 36.3, 40.9, 4.47, and 1.84 g/l of xylose, glucose, arabinose, and mannose, respectively, were fermented (pH 7, 37 °C, 150 rpm) to ethanol with the metabolically engineered acetate-tolerant Escherichia coli strain MS04 under non-aerated conditions, producing 35 g/l of ethanol in 18 h (1.94 g_EtOH/l/h), i.e., a conversion yield greater than 80 % of the theoretical value based on total sugars was obtained. Hence, using the procedures developed in this study, 288 l of ethanol can be produced per metric ton of dry corncobs. Strain MS04 can ferment sugars in the presence of acetate, and the amount of furans generated during the sequential thermochemical and enzymatic hydrolysis was low; hence, the detoxification step was avoided. The residual salts, acetic acid, and solubilized lignin present in the syrup did not interfere with the production of ethanol by E. coli MS04 and the results show that this strain can metabolize mixtures of glucose and xylose simultaneously.     

Effect of physicochemical pre-treatment of rice straw on its digestibility by <Emphasis Type="Italic">Clostridium cellulolyticum</Emphasis>

Rice straw (RS) may serve as a low-cost biomass for the production of biofuels and biochemicals, but its native structure is resistant to enzymatic and microbial deconstruction. Therefore, an efficient pre-treatment method is required to modify crystalline cellulose to a more reactive amorphous form. This work investigated pre-treatments of rice straw involving size reduction (S) followed by either sodium hydroxide (NaOH) or diluted sulfuric acid (H₂SO₄) and liquid hot water (LHW). The shrinkage of the vascular bundles in the rice straw structure pre-treated with NaOH–LHW–S was higher than that with LHW–S and H₂SO₄–LHW–S pre-treatments. The highest levels of total fermentative products and residual sugars were obtained at the concentrations of 7.8 ± 0.2 and 2.1 ± 0.3 g/L, respectively, after fermentation by Clostridium cellulolyticum for NaOH–LHW–S pre-treated rice straw at 121 °C for 120 min. Overall, the combined physicochemical pre-treatment of RS led to improved microbial hydrolysis during cellulose degradation at the percentage of 85.5 ± 0.5.     

Optimizing pentose utilization in yeast: the need for novel tools and approaches

Background

The two-step dilute acid hydrolysis (DAH) of softwood is costly in energy demands and capital costs. However, it has the advantage that hydrolysis and subsequent removal of hemicellulose-derived sugars can be carried out under conditions of low severity, resulting in a reduction in the level of sugar degradation products during the more severe subsequent steps of cellulose hydrolysis. In this paper, we discuss a single-step DAH method that incorporates a temperature profile at two levels. This profile should simulate the two-step process while removing its major disadvantage, that is, the washing step between the runs, which leads to increased energy demand.

Results

The experiments were conducted in a reactor with a controlled temperature profile. The total dry matter content of the hydrolysate was up to 21.1% w/w, corresponding to a content of 15.5% w/w of water insoluble solids. The highest measured glucose yield, (18.3 g glucose per 100 g dry raw material), was obtained after DAH cycles of 3 min at 209°C and 6 min at 211°C with 1% H₂SO₄, which resulted in a total of 26.3 g solubilized C6 sugars per 100 g dry raw material. To estimate the remaining sugar potential, enzymatic hydrolysis (EH) of the solid fraction was also performed. EH of the solid residue increased the total level of solubilized C6 sugars to a maximum of 35.5 g per 100 g dry raw material when DAH was performed as described above (3 min at 210°C and 2 min at 211°C with 1% H₂SO₄).

Conclusion

The dual-temperature DAH method did not yield decisively better results than the single-temperature, one-step DAH. When we compared the results with those of earlier studies, the hydrolysis performance was better than with the one-step DAH but not as well as that of the two-step, single-temperature DAH. Additional enzymatic hydrolysis resulted in lower levels of solubilized sugars compared with other studies on one-step DAH and two-step DAH followed by enzymatic hydrolysis. A two-step steam pretreatment with EH gave rise to a considerably higher sugar yield in this study.     

Identification of Newly Isolated Talaromyces pinophilus and Statistical Optimization of β-Glucosidase Production Under Solid-State Fermentation

Fungi able to degrade agriculture wastes were isolated from different soil samples, rice straw, and compost; these isolates were screened for their ability to produce β-glucosidase. The most active fungal isolate was identified as Talaromyces pinophilus strain EMOO 13-3. The Plackett–Burman design is used for identifying the significant variables that influence β-glucosidase production under solid-state fermentation. Fifteen variables were examined for their significances on the production of β-glucosidase in 20 experimental runs. Among the variables screened, moisture content, Tween 80, and (NH₄)₂SO₄ had significant effects on β-glucosidase production with confidence levels above 90% (p < 0.1). The optimal levels of these variables were further optimized using Box–Behnken statical design. As a result, the maximal β-glucosidase activity is 3648.519 U g^?1, which is achieved at the following fermentation conditions: substrate amount 0.5 (g/250 mL flask), NaNO₃ 0.5 (%), KH₂PO₄ 0.3 (%), KCl 0.02 (%), MgSO₄ · 7H₂O 0.01 (%), CaCl₂ 0.01 (%), yeast extract 0.07 (%), FeSO₄ · 7H₂O 0.0002 (%), Tween 80 0.02 (%), (NH₄)₂SO₄ 0.3 (%), pH 6.5, temperature 25°C, moisture content 1 (mL/g dry substrate), inoculum size 0.5 (mL/g dry substrate), and incubation period 5 days.     

Pretreatment of microcrystalline cellulose in organic electrolyte solutions for enzymatic hydrolysis

Background

Biomass use for the production of bioethanol or platform chemicals requires efficient breakdown of biomass to fermentable monosaccharides. Lignocellulosic feedstocks often require physicochemical pretreatment before enzymatic hydrolysis can begin. The optimal pretreatment can be different for different feedstocks, and should not lead to biomass destruction or formation of toxic products.

Methods

We examined the influence of six mild sulfuric acid or water pretreatments at different temperatures on the enzymatic degradability of sugar-beet pulp (SBP).

Results

We found that optimal pretreatment at 140°C of 15 minutes in water was able to solubilize 60% w/w of the total carbohydrates present, mainly pectins. More severe treatments led to the destruction of the solubilized sugars, and the subsequent production of the sugar-degradation products furfural, hydroxymethylfurfural, acetic acid and formic acid. The pretreated samples were successfully degraded enzymatically with an experimental cellulase preparation.

Conclusions

In this study, we found that pretreatment of SBP greatly facilitated the subsequent enzymatic degradation within economically feasible time ranges and enzyme levels. In addition, pretreatment of SBP can be useful to fractionate functional ingredients such as arabinans and pectins from cellulose. We found that the optimal combined severity factor to enhance the enzymatic degradation of SBP was between log R'₀ = -2.0 and log R'₀ = -1.5. The optimal pretreatment and enzyme treatment solubilized up to 80% of all sugars present in the SBP, including ≥90% of the cellulose.     

Production of hemicellulosic sugars and glucose from residual corrugated cardboard

Corrugated cardboard samples were subjected to two-step saccharification. A first prehydrolysis stage was carried out to solubilise the hemicellulosic fraction as hemicellulosic sugars, and the solid phase from prehydrolysis was used as a substrate for the enzymic hydrolysis of cellulose. The prehydrolysis step was carried out for 0–180 min in media containing 1–3 wt.% of H₂SO₄ and the fraction of solid recovered after treatments and the compositions of solid and liquid phases from treatments were measured. The susceptibility of prehydrolysed solids towards the enzymic hydrolysis was assessed in further experiments. Under selected prehydrolysis conditions (3% H₂SO₄, 180 min), 78.2% of initial hemicelluloses was saccharified, leading to liquors containing up to 10 g hemicellulosic sugars/l and 9.2 g glucose/l. The corresponding solid phase, enriched in cellulose, showed good susceptibility towards enzymatic hydrolysis, leading to solutions containing up to 17.9 g glucose/l (conversion yield=63.6%) and a glucose/total sugar ratio of 0.93 g/g. Mathematical models assessing the effects of the operational conditions on both the prehydrolysis stage and the susceptibility of substrates towards enzymic hydrolysis have been developed.     

Potential of phosphoric acid-catalyzed pretreatment and subsequent enzymatic hydrolysis for biosugar production from <Emphasis Type="Italic">Gracilaria verrucosa</Emphasis>

This study combined phosphoric acid-catalyzed pretreatment and enzymatic hydrolysis to produce biosugars from Gracilaria verrucosa as a potential renewable resource for bioenergy applications. We optimized phosphoric acid-catalyzed pretreatment conditions to 1:10 solid-to-liquid ratio, 1.5 % phosphoric acid, 140 °C, and 60 min reaction time, producing a 32.52 ± 0.06 % total reducing sugar (TRS) yield. By subsequent enzymatic hydrolysis, a 68.61 ± 0.90 % TRS yield was achieved. These results demonstrate the potential of phosphoric acid to produce biosugars for biofuel and biochemical production applications.     

Valorization of Hemicelluloses: Production of Bioxylitol from Poplar Wood Prehydrolyzates by <Emphasis Type="Italic">Candida guilliermondii</Emphasis> FTI 20037

In this study on the valorization of hemicelluloses (a co-product generated during cellulosic bioethanol production), prehydrolyzates obtained from poplar woodchips pretreated in an industrial experimental steam-explosion pilot-plant facility were evaluated for the production of bioxylitol using the yeast, Candida guilliermondii FTI 20037, employing both batch and fed-batch fermentation modes in shake flasks on defined nutrient medium. The prehydrolyzates consisted of monosaccharides (pentose and hexose sugars) as well as xylo-oligosaccharides and undegraded hemicellulose. Xylose (31.6?±?0.57 g/L) was the major sugar in the prehydrolyzates that also contained acetic acid and degradation products of lignin and sugars (phenolic and furanic compounds). Xylose in the prehydrolyzates could be further increased (106.4?±?0.02 g/L) through an acid hydrolysis step (0.6 % (w/v) H₂SO₄). Compounds of a toxic nature in both the acid hydrolyzates and prehydrolyzates were removed by treatment with Amberlite IRA-400 resin (chloride form). Batch fermentation of pure xylose and poplar prehydrolyzate resulted in bioxylitol production of 9.9?±?0.01 and 4.9?±?0.17 g/L, respectively, indicating that the poplar prehydrolyzates exhibited an inhibitory effect on fermentation. After detoxification of the poplar prehydrolyzates, bioxylitol production increased to 8.9?±?0.01 g/L. Fed-batch fermentation of the prehydrolyzate increased the bioxylitol production to 12.39?±?0.33 g/L, while acid hydrolysis followed by detoxification resulted in a maximum bioxylitol production of 22.0?±?0.01 g/L, a 348 % increase. The results demonstrated that acid hydrolysis and detoxification followed by fed-batch fermentation was an efficient way to produce bioxylitol from poplar prehydrolyzates.     

Bioethanol production from the hydrolysate of Palmaria palmata using sulfuric acid and fermentation with brewer’s yeast

Seaweeds, particularly species of red macroalgae, are promising resources for bioethanol production because of their exceptionally high carbohydrate content. Of 20 seaweeds evaluated, Palmaria palmata (Rhodymenia palmata) contained the highest carbohydrate content (469.8 mg g^?1 seaweed) with a carrageenan content of 354 mg g^?1 seaweed. Such a high carrageenan content makes the high-volume production of bioethanol feasible. Acid hydrolysis of P. palmata in 0.4 M H₂SO₄ at 125 °C for 25 min released 27 mg of glucose, 218.4 mg of reducing sugars, and 127.6 mg of galactose per gram of seaweed. Ethanol fermentation of these hydrolysis products using an inoculum concentration of 1.5 mg mL^?1 at 30 °C and 72 h in a shaking incubator at 130 rpm yielded 17.3 mg of ethanol per gram of seaweed.     

Effect of dilute acid pretreatment on the saccharification and fermentation of rye straw

This research shows the effect of dilute acid pretreatment with various sulfuric acid concentrations (0.5–2.0% [wt/vol]) on enzymatic saccharification and fermentation yield of rye straw. After pretreatment, solids of rye straw were suspended in Na citrate buffer or post-pretreatment liquids (prehydrolysates) containing sugars liberated after hemicellulose hydrolysis. Saccharification was conducted using enzymes dosage of 15 or 25 FPU/g cellulose. Cellulose saccharification rate after rye straw pretreatment was enhanced by performing enzymatic hydrolysis in sodium citrate buffer in comparison with hemicellulose prehydrolysate. The maximum cellulose saccharification rate (69%) was reached in sodium citrate buffer (biomass pretreated with 2.0% [wt/vol] H₂SO₄). Lignocellulosic complex of rye straw after pretreatment was subjected to separate hydrolysis and fermentation (SHF) or separate hydrolysis and co-fermentation (SHCF). The SHF processes conducted in the sodium citrate buffer using monoculture of Saccharomyces cerevisiae (Ethanol Red) were more efficient compared to hemicellulose prehydrolysate in respect with ethanol yields. Maximum fermentation efficiency of SHF processes obtained after rye straw pretreatment at 1.5% [wt/vol] H₂SO₄ and saccharification using enzymes dosage of 25 FPU/g in sodium citrate buffer, achieving 40.6% of theoretical yield. However, SHCF process using cocultures of pentose-fermenting yeast, after pretreatment of raw material at 1.5% [wt/vol] H₂SO₄ and hydrolysis using enzymes dosage of 25 FPU/g, resulted in the highest ethanol yield among studied methods, achieving 9.4 g/L of ethanol, corresponding to 55% of theoretical yield.     

Bioconversion of municipal solid waste to glucose for bio-ethanol production

Selected biodegradable municipal solid waste fractions were subjected to fifteen different pre-hydrolysis treatments to obtain the highest glucose yield for bio-ethanol production. Pre-hydrolysis treatments consisted of dilute acid (H₂SO₄, HNO₃ or HCl, 1 and 4%, 180 min, 60°C), steam treatment (121 and 134°C, 15 min), microwave treatment (700 W, 2 min) or a combination of two of them. Enzymatic hydrolysis was carried out with Trichoderma reesei and Trichoderma viride (10 and 60 FPU g⁻¹ substrate). Glucose yields were compared using a factorial experimental design. The highest glucose yield (72.80%) was obtained with a pre-hydrolysis treatment consisting of H₂SO₄ at 1% concentration, followed by steam treatment at 121°C, and enzymatic hydrolysis with Trichoderma viride at 60 FPU g⁻¹ substrate. The contribution of enzyme loading and acid concentration was significantly higher (49.39 and 47.70%, respectively), than the contribution of temperature during steam treatment (0.13%) to the glucose yield.     

产脂肪酶菌株筛选及柠檬酸杆菌产酶条件优化

脂肪酶可以催化甘油三酯水解成脂肪酸和甘油,已广泛应用在工业领域,而获得产酶微生物是研究的基础。采用油脂平板法筛选出1株脂肪酶产生菌。经16S rRNA序列分析可知,该菌株属于柠檬酸杆菌(Citrobacter werkman and Gillen)。单因素试验对其进行产酶条件优化,优化后产酶条件（g/L）：淀粉2.0,KH₂PO₄ 1.0,K₂HPO₄·3H₂O 2.2,(NH₄)₂SO₄ 1.0,MgSO₄·7H₂O 0.1,牛肉膏2.0,橄榄油10.0 mL,pH 7.5,接种量1.5%(v/v),37 ℃培养43 h。获得最大酶活为384 U/mL,是优化前的13倍。可以利用该菌制备脂肪酶。     

稀酸和稀碱预处理对四种不同生物质资源制备还原糖的影响

本论文探讨了不同浓度的稀H_2SO_4和稀NaOH预处理对大豆秸秆、水稻秸秆、象草和狼尾草四种不同生物质酶解制备还原糖的影响。结果表明,大豆秸秆、水稻秸秆、象草和狼尾草具有较高的纤维素和半纤维素含量,是制备还原糖的理想原料。与稀H_2SO_4预处理相比,经稀NaOH预处理后的样品表现出较好的酶解性能。通过使用4%的NaOH对大豆秸秆和狼尾草进行预处理,还原糖产量分别为145.8 mg/mL和319.2 mg/mL。此外,以1%NaOH预处理后的水稻秸秆和象草为原料,可以分别获得385.2 mg/mL和231.6 mg/mL还原糖产量。