A simple and rapid harvesting method for microalgae by in situ magnetic separation

A simple and rapid harvesting method by in situ magnetic separation with naked Fe₃O₄ nanoparticles has been developed for the microalgal recovery of Botryococcus braunii and Chlorella ellipsoidea. After adding the magnetic particles to the microalgal culture broth, the microalgal cells were adsorbed and then separated by an external magnetic field. The maximal recovery efficiency reached more than 98% for both microalgae at a stirring speed of 120 r/min within 1 min, and the maximal adsorption capacity of these Fe₃O₄ nanoparticles reached 55.9 mg-dry biomass/mg-particles for B. braunii and 5.83 mg-dry biomass/mg-particles for C. ellipsoidea. Appropriate pH value and high nanoparticle dose were favorable to the microalgae recovery, and the adsorption mechanism between the naked Fe₃O₄ nanoparticles and the microalgal cells was mainly due to the electrostatic attraction. The developed in situ magnetic separation technology provides a great potential for saving time and energy associated with improving microalgal harvesting.     

Tailoring size and structural distortion of Fe3O4 nanoparticles for the purification of contaminated water

Fe₃O₄ magnetic nanoparticles with different particle sizes were synthesized using two methods, i.e., a co-precipitation process and a polyol process, respectively. The atomic pair distribution analyses from the high-energy X-ray scattering data and TEM observations show that the two kinds of nanoparticles have different sizes and structural distortions. An average particle size of 6–8 nm with a narrow size distribution was observed for the nanoparticles prepared with the co-precipitation method. Magnetic measurements show that those particles are in ferromagnetic state with a saturation magnetization of 74.3 emu g⁻¹. For the particles synthesized with the polyol process, a mean diameter of 18–35 nm was observed with a saturation magnetization of 78.2 emu g⁻¹. Although both kinds of nanoparticles are well crystallized, an obviously higher structural distortion is evidenced for the co-precipitation processed nanoparticles. The synthesized Fe₃O₄ particles with different mean particle size were used for treating the wastewater contaminated with the metal ions, such as Ni(II), Cu(II), Cd(II) and Cr(VI). It is found that the adsorption capacity of Fe₃O₄ particles increased with decreasing the particle size or increasing the surface area. While the particle size was decreased to 8 nm, the Fe₃O₄ particles can absorb almost all of the above-mentioned metal ions in the contaminated water with the adsorption capacity of 34.93 mg/g, which is ∼7 times higher than that using the coarse particles. We attribute the extremely high adsorption capacity to the highly-distorted surface.     

A nanocomposite/crude extract enzyme-based xanthine biosensor

A novel amperometric biosensor for xanthine was developed based on covalent immobilization of crude xanthine oxidase (XOD) extracted from bovine milk onto a hybrid nanocomposite film via glutaraldehyde. Toward the preparation of the film, a stable colloids solution of core–shell Fe₃O₄/polyaniline nanoparticles (PANI/Fe₃O₄ NPs) was dispersed in solution containing chitosan (CHT) and H₂PtCl₆ and electrodeposited over the surface of a carbon paste electrode (CPE) in one step. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectrophotometry, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) were used for characterization of the electrode surface. The developed biosensor (XOD/CHT/Pt NPs/PANI/Fe₃O₄/CPE) was employed for determination of xanthine based on amperometric detection of hydrogen peroxide (H₂O₂) reduction at –0.35 V (vs. Ag/AgCl). The biosensor exhibited a fast response time to xanthine within 8 s and a linear working concentration range from 0.2 to 36.0 μM (R² = 0.997) with a detection limit of 0.1 μM (signal/noise [S/N] = 3). The sensitivity of the biosensor was 13.58 μA μM⁻¹ cm⁻². The apparent Michaelis–Menten (K_m) value for xanthine was found to be 4.7 μM. The fabricated biosensor was successfully applied for measurement of fish and chicken meat freshness, which was in agreement with the standard method at the 95% confidence level.     

Optimum conditions for lipase immobilization on chitosan-coated Fe3O4 nanoparticles

Magnetic Fe₃O₄-chitosan nanoparticles are prepared by the coagulation of an aqueous solution of chitosan with Fe₃O₄ nanoparticles. The characterization of Fe₃O₄-chitosan is analyzed by FTIR, FESEM, and SQUID magnetometry. The Fe₃O₄-chitosan nanoparticles are used for the covalent immobilization of lipase from Candida rugosa using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling agents. The response surface methodology (RSM) was employed to search the optimal immobilization conditions and understand the significance of the factors affecting the immobilized lipase activity. Based on the ridge max analysis, the optimum immobilization conditions were immobilization time 2.14 h, pH 6.37, and enzyme/support ratio 0.73 (w/w); the highest activity obtained was 20 U/g Fe₃O₄-chitosan. After twenty repeated uses, the immobilized lipase retains over 83% of its original activity. The immobilized lipase shows better operational stability, including wider thermal and pH ranges, and remains stable after 13 days of storage at 25 °C.     

In situ preparation of magnetic Fe3O4-chitosan nanoparticles for lipase immobilization by cross-linking and oxidation in aqueous solution

A new and simple method has been proposed to prepare magnetic Fe₃O₄-chitosan (CS) nanoparticles by cross-linking with sodium tripolyphosphate (TPP), precipitation with NaOH and oxidation with O₂ in hydrochloric acid aqueous phase containing CS and Fe(OH)₂, and these magnetic CS nanoparticles were used to immobilize lipase. The effects on the sequence of adding NaOH and TPP, the reaction temperature, and the ratio of CS/Fe(OH)₂ were studied. TEM showed that the diameter of composite nanoparticles was about 80 nm, and that the magnetic Fe₃O₄ nanoparticles with a diameter of 20 nm were evenly dispersed in the CS materials. Magnetic measurement revealed that the saturated magnetisation of the Fe₃O₄-CS nanoparticles could reach 35.54 emu/g. The adsorption capacity of lipase onto nanoparticles could reach 129 mg/g; and the maximal enzyme activity was 20.02 μmol min⁻¹ mg⁻¹ (protein), and activity retention was as high as 55.6% at a certain loading amount.     

Biodesulfurization of Dibenzothiophene by Microbial Cells Coated with Magnetite Nanoparticles

Microbial cells of Pseudomonas delafieldii were coated with magnetic Fe₃O₄ nanoparticles and then immobilized by external application of a magnetic field. Magnetic Fe₃O₄ nanoparticles were synthesized by a coprecipitation method followed by modification with ammonium oleate. The surface-modified Fe₃O₄ nanoparticles were monodispersed in an aqueous solution and did not precipitate in over 18 months. Using transmission electron microscopy (TEM), the average size of the magnetic particles was found to be in the range from 10 to 15 nm. TEM cross section analysis of the cells showed further that the Fe₃O₄ nanoparticles were for the most part strongly absorbed by the surfaces of the cells and coated the cells. The coated cells had distinct superparamagnetic properties. The magnetization (δ_s) was 8.39 emu · g⁻¹. The coated cells not only had the same desulfurizing activity as free cells but could also be reused more than five times. Compared to cells immobilized on Celite, the cells coated with Fe₃O₄ nanoparticles had greater desulfurizing activity and operational stability.     

Colorimetric estimation of human glucose level using γ-Fe2O3 nanoparticles: An easily recoverable effective mimic peroxidase

This article reports simple, green and efficient synthesis of γ-Fe₂O₃ nanoparticles (NPs) (maghemite) through single-source precursor approach for colorimetric estimation of human glucose level. The γ-Fe₂O₃ NPs, having cubic morphology with an average particle size of 30 nm, exhibited effective peroxidase-like activity through the catalytic oxidation of peroxidase substrate 3,3′,5,5′-tetramethylbenzidine (TMB) in the presence of H₂O₂ producing a blue-colored solution. On the basis of this colored-reaction, we have developed a simple, cheap, highly sensitive and selective colorimetric method for estimation of glucose using γ-Fe₂O₃/TMB/glucose–glucose oxidase (GOx) system in the linear range from 1 to 80 μM with detection limit of 0.21 μM. The proposed glucose sensor displays faster response, good stability, reproducibility and anti-interference ability. Based on this simple reaction process, human blood and urine glucose level can be monitored conveniently.     

The development of an electrochemical immunosensor using a thiol aromatic aldehyde and PAMAM-functionalized Fe3O4@Au nanoparticles

In this work, a novel thiol aromatic aldehyde was synthesized. It can be used as a substrate to directly immobilize antibodies on a gold electrode, for which no additional chemical cross-linker is required. It was also applied as a linker to prepare Fe₃O₄@Au/PAMAM/Ab₂–horseradish peroxidase bioconjugates, which introduced multiple enzymes onto a sensing interface owing to the high surface-to-volume ratio of Fe₃O₄@Au nanoparticles and many functional groups of the poly(amidoamine) dendrimer (PAMAM). The introduced multiple enzymes greatly improved the detection signal. Under optimal conditions, the proposed electrochemical immunosensor exhibited desirable performance for detection of IgG in the range 0.005–50 ng ml⁻¹ with a detection limit of 3 pg ml⁻¹ based on a signal-to-noise ratio of 3. It has great potential application in the area of clinical analysis.     

Tetracycline nanoparticles loaded calcium sulfate composite beads for periodontal management

Background

The objective of this study was to fabricate, characterize and evaluate in vitro, an injectable calcium sulfate bone cement beads loaded with an antibiotic nanoformulation, capable of delivering antibiotic locally for the treatment of periodontal disease.

Methods

Tetracycline nanoparticles (Tet NPs) were prepared using an ionic gelation method and characterized using DLS, SEM, and FTIR to determine size, morphology, stability and chemical interaction of the drug with the polymer. Further, calcium sulfate (CaSO₄) control and CaSO₄-Tet NP composite beads were prepared and characterized using SEM, FTIR and XRD. The drug release pattern, material properties and antibacterial activity were evaluated. In addition, protein adsorption, cytocompatibility and alkaline phosphatase activity of the CaSO₄-Tet NP composite beads in comparison to the CaSO₄ control were analyzed.

Results

Tet NPs showed a size range of 130 ± 20 nm and the entrapment efficiency calculated was 89%. The composite beads showed sustained drug release pattern. Further the drug release data was fitted into various kinetic models wherein the Higuchi model showed higher correlation value (R² = 0.9279) as compared to other kinetic models. The composite beads showed antibacterial activity against Staphylococcus aureus and Escherichia coli. The presence of Tet NPs in the composite bead didn't alter its cytocompatibility. In addition, the composite beads enhanced the ALP activity of hPDL cells.

Conclusions

The antibacterial and cytocompatible CaSO₄-Tet NP composite beads could be beneficial in periodontal management to reduce the bacterial load at the infection site.

General significance

Tet NPs would deliver antibiotic locally at the infection site and the calcium sulfate cement, would itself facilitate tissue regeneration.     

Nanoparticles facilitate gene delivery to microorganisms via an electrospray process

In this study, we developed a technique for delivering genes to microorganisms via electrospray of gold nanoparticles. During the electrospray process, charged monodisperse nano-droplets (a mixture of pET30a-GFP plasmid and nano-sized gold particles) were accelerated and deposited on a thin layer of non-competent Escherichia coli cells. Via antibiotic selection, transformed cells containing green fluorescent protein appeared on the agar plates. PCR amplification and restriction enzyme analysis further confirmed that pET30a-GFP plasmid had successfully been delivered into the non-competent E. coli cells. The transformation efficiencies were optimized under different electrospray conditions. Among several electrospray buffer solutions, CaCl₂ (0.01 M) was found to be the best for gene delivery. Furthermore, gold nanoparticles (NPs, 50 nm diameter) significantly improved plasmid transformation efficiency by 5- 7 fold (up to 2 × 10⁶ CFU/μg plasmid) compared with that obtained using naked plasmid. Electronic microscopy images and gel electrophoresis showed that the morphology of plasmids remained unchanged during the electrospray process, but cellular membrane integrity was reduced after being electrosprayed with gold NPs and CaCl₂ buffer solutions. This gene delivery method has the potential to work for many other microorganisms.     

Double-Layer Magnetic Nanoparticle-Embedded Silica Particles for Efficient Bio-Separation

Superparamagnetic Fe₃O₄ nanoparticles (NPs) based nanomaterials have been exploited in various biotechnology fields including biomolecule separation. However, slow accumulation of Fe₃O₄ NPs by magnets may limit broad applications of Fe₃O₄ NP-based nanomaterials. In this study, we report fabrication of Fe₃O₄ NPs double-layered silica nanoparticles (DL MNPs) with a silica core and highly packed Fe₃O₄ NPs layers. The DL MNPs had a superparamagnetic property and efficient accumulation kinetics under an external magnetic field. Moreover, the magnetic field-exposed DL MNPs show quantitative accumulation, whereas Fe₃O₄ NPs single-layered silica nanoparticles (SL MNPs) and silica-coated Fe₃O₄ NPs produced a saturated plateau under full recovery of the NPs. DL MNPs are promising nanomaterials with great potential to separate and analyze biomolecules.     

Synthesis and characterization of multifunctional poly(glycidyl methacrylate) microspheres and their use in cell separation

Multifunctional poly(glycidyl methacrylate) (PGMA) microspheres containing magnetic, fluorescent, and cancer cell-specific moieties were prepared in four steps: (i) preparation of parent PGMA microspheres by dispersion polymerization and their reaction with ethylenediamine to obtain amino groups, (ii) precipitation of iron ions (Fe²⁺ and Fe³⁺) to form Fe₃O₄ nanoparticles within the microspheres, (iii) consecutive reactions of folic acid with the amino groups on PGMA, and (iv) incorporation of fluorescein isothiocyanate into the microspheres. The microspheres were superparamagnetic, highly monodispersive, intensively fluorescent, and capable of recognizing and binding cancer cells that overexpress folic acid receptors. It was demonstrated that with these microspheres, HeLa cells could be captured from their suspension and easily moved in the direction of the externally applied magnetic field.     

Germanium tetra(tertiary butoxide): Synthesis, structure and its utility as a precursor for the preparation of europium doped germanium oxide nanoparticles

Germanium tetra(tertiary butoxide), [Ge(O^tBu)₄], has been prepared by the reaction of GeCl₄ with KOBu^t in benzene. It is a monomeric crystalline solid having a distorted tetrahedral configuration, defined by the coordination of four OBu^t groups around germanium atom. The TG analysis showed that the compound is thermally stable and volatilizes at around 130 °C. Europium doped and un-doped germanium oxide nanoparticles were prepared based on the urea hydrolysis of Ge(O^tBu)₄/Eu(OOCCH₃)₃ in ethylene glycol medium at 150 °C followed by heating the resulting product at 750 °C. The nanoparticles were characterized by XRD, TEM and PL measurements. The europium doped nanoparticles, which were nearly monodispersed (∼30 nm), showed luminescence and the Eu³⁺ ions were occupying the surface of the GeO₂ nanoparticles.     

Characterization of magnetic guar gum-grafted carbon nanotubes and the adsorption of the dyes

The hydrophobicity of carbon nanotubes (CNTs) limits their extensive application. The hydrophilicity and biocompatibility of CNTs can be improved by modifying them with biopolymers. As a natural biopolymer, guar gum (GG) was covalently grafted on the surfaces of multiwall carbon nanotube (MWCNT) to obtain GG-MWCNT composite. Then iron oxide nanoparticles were synthesized on the GG-MWCNT to prepare the magnetic GG-MWCNT-Fe₃O₄. The obtained nanocomposites were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, transmission electron microscopy, ultraviolet-visible (UV-vis) spectroscopy and X-ray diffraction. GG-MWCNT was composed of about 21.6 wt% GG components, which enhanced the dispersion of GG-MWCNT in aqueous solution and also acted as a template for growth of iron oxide nanoparticles. GG-MWCNT-Fe₃O₄ exhibited superparamagnetic with a saturation magnetization (13.3 emu g⁻¹), and good adsorption on neutral red and methylene blue. GG-MWCNT-Fe₃O₄ could be easily separated from the aqueous solution in a magnetic field.     

Synthesis and characterization of cobalt oxide nanoparticles by thermal treatment process

The simple preparation of Co₃O₄ nanoparticles from a solid organometallic molecular precursor N-N′-bis(salicylaldehyde)-1,2-phenylenediimino cobalt(II); Co(salophen) has been achieved via two simple steps: firstly, the Co(salophen) precursor was precipitated from the reaction of cobalt(II) acetate and N-N′-bis(salicylaldehyde)-1,2-phenylenediimino; H₂salophen; in propanol under nitrogen condition; then, cubic phase Co₃O₄ nanoparticles with the size of mostly 30-50 nm could be produced by thermal treatment of the Co(salophen) in air at 773 K for 5 h. The as-synthesized products were characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and scanning electronic microscopy (SEM). These results confirm that the resulting oxide was pure single-crystalline Co₃O₄ nanoparticles. The optical property test indicates that the absorption peak of the nanoparticles shifts towards short wavelength, and the blue shift phenomenon might be ascribed to the quantum effect. The hysteresis loops of the obtained samples reveal the ferromagnetic behaviors the enhanced coercivity (H_c) and decreased saturation magnetization (M_s) in contrast to their respective bulk materials.     

Optimization of the covalent coupling and ionic adsorption of magnetic nanoparticles on Flavobacterium ATCC 27551 using the Taguchi method

Abstract

Flavobacterium ATCC 27551 was used as a model system for the preparation of magnetic biocatalysts. The magnetic modification was carried out by covalently binding carboxylate- and amino-modified magnetic nanoparticles onto cells. Magnetic Fe₃O₄ nanoparticles were also used for ionic adsorption on the cell surface. Magnetically modified cells were concentrated using a magnet and exhibited organophosphate hydrolyzing activity. The Taguchi method was used to optimize the binding of the magnetic nanoparticles on the cell surface. SEM image analyses demonstrated good linkage of the magnetic nanoparticles over the Flavobacterium ATCC 27551 cell surface. Under optimal conditions, the magnetic cells displayed specific activity ratios of 93%, 89% and 95%, compared with untreated cells, after the covalent coupling with carboxylate- and amino-modified magnetic nanoparticles and the ionic adsorption of magnetic Fe₃O₄ nanoparticles, respectively.     

Deposition of iron titanate/titania ceramic composite thin films from a single molecular precursor

A heterobimetallic single molecular precursor, [Fe₂Ti₄(μ-O)₆(TFA)₈(THF)₆] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized by the simple reaction of [Fe₃O(OAc)₆(H₂O)₃]NO₃·4H₂O [OAc = acetato] with tetrakis(2-ethoxyethanalato)titanium(IV) in the presence of trifluoroacetic acid in THF. The synthesized precursor was analyzed by melting point, CHN analysis, FTIR, single crystal X-ray diffraction and thermogravimetric analysis. Complex (1) crystallizes in the orthorhombic space group Pca2₁ with cell dimensions a = 19.2114(14), b = 20.4804(15) and c = 17.2504(12) Å, and the complex undergoes thermal decomposition at 490 °C to give a residual mass corresponding to an Fe₂TiO₅-TiO₂ composite mixture. The synthesized precursor was utilized for deposition of Fe₂TiO₅-TiO₂ composite thin films by aerosol-assisted chemical vapor deposition (AACVD) on glass substrates at 500 °C using argon as the carrier gas. Scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and X-ray powder diffraction (XRD) analyses of the thin films suggest the formation of good quality crystalline thin films of an Fe₂TiO₅-TiO₂ composite with an average grain size of 0.105-0.120 μm.     

Preparation and characterization of magnetic gold nanoparticles to be used as doxorubicin nanocarriers

Magnetic targeted drug delivery (MTD), using magnetic gold nanoparticles (Fe₃O₄@Au NPs) conjugated with an anti-cancer drug is a promise modality for cancer treatment. In this study, Fe₃O₄@Au NPs were prepared and functionalized with thiol-terminated polyethylene glycol (PEG), then loaded with anti-cancer drug doxorubicin (DOX). The physical properties of the prepared NPs were characterized using different techniques. Transmission electron microscopy (TEM) revealed the mono dispersed nature of Fe₃O₄@Au NPs with an average size of 20 nm which was confirmed using Dynamic light scattering (DLS) measurements. Zeta potential measurements along with UV–VIS spectroscopy demonstrated surface DOX loading on Fe₃O₄@Au NPs. Energy Dispersive X-ray Spectroscopy (EDX) assured the existence of both iron and gold elements in the prepared NPs. The paramagnetic properties of the prepared NPs were assessed by vibrating sample magnetometer (VSM). The maximum DOX-loading capacity was 100 μg DOX/mg of Fe₃O₄@Au NPs. It was found that DOX released more readily at acidic pH. In vitro studies on MCF-7 cell line elucidated that DOX loaded Fe₃O₄@Au NPs (Fe₃O₄@Au-PEG-DOX) have more potent therapeutic effect than free DOX. Knowledge gained in this study may open the door to pursue Fe₃O₄@Au NPs as a viable nanocarriers for different molecules delivery in many diagnostic and therapeutic applications.     

Enhanced Sono-Fenton-Like Oxidation of PAH-Contaminated Soil Using Nano-Sized Magnetite as Catalyst: Optimization with Response Surface Methodology

In the current study, Fe₃O₄ NPs were synthesized and used as catalysts in a sono-Fenton-like process for remediation of polycyclic aromatic hydrocarbon (PAH)-contaminated soil. The effects of operational variables were studied using central composite design (CCD) optimization approach. Results indicated that the effects of H₂O₂ concentration, Fe₃O₄ NPs dosage, ultrasonic power and pH were significant for pyrene removal as a contaminant model. In optimum experimental conditions, including H₂O₂ concentration of 78 mM, Fe₃O₄ NPs dosage of 18 mM, ultrasonic power of 313 W and pH value of 3.46, the observed pyrene removal was obtained 98.37%, which was verified through the additional experimental tests (99.33%). Pseudo first-order kinetic model was well fitted with the experimental data of pyrene removal with significant coefficient of correlation (R²: 0.9672). Accordingly, an unwashed real soil sample containing diffident PAHs (pyrene, flurene, acenaphthylene, phenenthrene, chrysene, etc) was subjected to sono-Fenton-like process based on optimized conditions. The obtained findings revealed that the removal (%) ranged between 37.7% and 85.19% for different PAHs.     

Determination of catalase activity using chromogenic probe involving iso-nicotinicacidhydrazide and pyrocatechol

A biocatalatic pathway involving chromogenic probe has been proposed for the determination of catalase activity by means of iso-nicotinicacidhydrazide (INH) and pyrocatechol (PC). The assay is based on the enzymatic consumption of hydrogen peroxide using INH-PC system. The response of the catalase activity was ascertained by the rate of the reaction involving 14.10 mM H₂O₂. On addition of H₂O₂, INH-PC indicator system formed a chromogenic product with absorbance maxima at 490 nm. Hence the activity of catalase was directly measured by the chromogenic response in the formation of the coupled product. The catalase assay was elaborated by the kinetic response of the INH-PC system. The linearity of the catalase activity and H₂O₂ was in the range 0.2-7.0 units and 1.76-7.0 mM, respectively in 3 ml solution. The catalytic efficiency and catalytic power were calculated. The Michaelis-Menten constant of INH, PC and H₂O₂ were found to be 0.344, 0.176 and 8.82 mM, respectively. The indicator reaction was applied in the determination of catalase activity in mycelia mats and culture media.