Adsorptive removal of Pb(II) by activated carbon prepared from Spartina alterniflora: Equilibrium,kinetics and thermodynamics

Low-cost activated carbon was prepared from Spartina alterniflora by phosphoric acid activation for the removal of Pb(II) from dilute aqueous solution. The effect of experimental parameters such as pH, initial concentration, contact time and temperature on the adsorption was studied. The obtained data were fitted with the Langmuir and Freundlich equations to describe the equilibrium isotherms. The kinetic data were fitted with the Lagergren-first-order, pseudo-second-order and Elovich models. It was found that pH played a major role in the adsorption process. The maximum adsorption capacity for Pb(II) on S. alterniflora activated carbon (SAAC) calculated from Langmuir isotherm was more than 99 mg g⁻¹. The optimum pH range for the removal of Pb(II) was 4.8–5.6. The Freundlich isotherm model was found to best describe the experimental data. The kinetic rates were best fitted to the pseudo-second-order model. Thermodynamic study showed the adsorption was a spontaneous exothermic process.     

Removal of malachite green from aqueous solution by immobilized Pseudomonas sp. DY1 with Aspergillus oryzae

Triphenylmethane dyes are considered to be one of the most recalcitrant pollutants in the environment. Malachite Green (MG) was successfully removed from aqueous solution by Pseudomonas sp. DY1 immobilization with Aspergillus oryzae. Inhibition test in the presence of sodium azide and nystatin indicated that A. oryzae was a natural immobilization reagent, and removal of MG by the immobilized cell pellets was attributed to the biodegradation by Pseudomonas sp. DY1. Optimum conditions of immobilization for maximum biodegradation were obtained using Taguchi design at 37 °C, inoculation size of Pseudomonas sp. DY1 (dry cell mass) 0.01 g, of A. oryzae (spore number) 1.0 × 10⁹, initial pH 6.5. Decolorization and biodegradation of MG by immobilized pellets under optimum conditions were 99.5% and 93.3%, respectively. Immobilized pellets exhibited more than 96% decolorization after 16 days in batch condition, indicating it had stable and high biodegradation capabilities when immobilized for long-term operation.     

Purification and characterization of two extracellular endochitinases from Massilia timonae

Two extracellular chitinases (designated as Chi-56 and Chi-64) produced by Massilia timonae were purified by ion-exchange chromatography, ammonium sulfate precipitation, and gel-filtration chromatography. The molecular mass of Chi-56 was 56 kDa as determined by both SDS-PAGE and gel-filtration chromatography. On the other hand, Chi-64 showed a molecular mass of 64 kDa by SDS-PAGE and 28 kDa by gel-filtration chromatography suggesting that its properties may be different from those of Chi-56. The optimum temperature, optimum pH, pI, K_m, and V_max of Chi-56 were 55 °C, pH 5.0, pH 8.5, 1.1 mg mL⁻¹, and 0.59 μmol μg⁻¹ h⁻¹, respectively. For Chi-64, these values were 60 °C, pH 5.0, pH 8.5, 1.3 mg mL⁻¹, and 1.36 μmol μg⁻¹ h⁻¹, respectively. Both enzymes were stimulated by Mn²⁺ and inhibited by Hg²⁺, and neither showed exochitinase activity. The N-terminal sequences of Chi-56 and Chi-64 were determined to be Q-T-P-T-Y-T-A-T-L and Q-A-D-F-P-A-P-A-E, respectively.     

Phenol removal from hypersaline wastewaters in a Membrane Biological Reactor (MBR): operation and microbiological characterisation

In this study, two Membrane Biological Reactors (MBR) with submerged flat membranes, one at lab-scale conditions and the other at pilot-plant conditions, were operated at environmental temperature to treat an industrial wastewater characterised by low phenol concentrations (8-16 mg L⁻¹) and high salinity (∼150-160 mS cm⁻¹). During the operation of both reactors, the phenol loading rate was progressively increased and less than 1 mg phenol L⁻¹ was detected even at very low HRTs (0.5-0.7 days). Membrane fouling was minimized by the cross flow aeration rate inside the MBRs and by intermittent permeation. Microbial community analysis of both reactors revealed that members of the genera Halomonas and Marinobacter (gammaproteobacteria) were major components. Growth-linked phenol degradation by pure cultures of Marinobacter isolates demonstrated that this bacterium played a major role in the removal of phenol from the bioreactors.     

Adsorption of Victoria blue by carbon/Ba/alginate beads: Kinetics,thermodynamics and isotherm studies

The kinetic, thermodynamic and isotherm modeling studies were carried out on adsorptive removal of Victoria blue (VB) dye using activated carbon, Ba/alginate and modified carbon/Ba/alginate polymer beads. The feasibility of sorption process was determined by varying the experimental parameters viz., dye concentration (4–20 mg L⁻¹), contact time (10–90 min), pH (3–10), adsorbent dose (0.5–2.5 g) and temperature (303–343 K). Freundlich and Langmuir isotherms were determined and ascertained with the dimensionless separation factor (R_L). Lagergren's pseudo-first order, pseudo-second order and intraparticle diffusion model equations were used to analyze the kinetics of the adsorption process. The thermodynamic consistency of adsorption was found with Gibbs free energy (ΔG°), changes in enthalpy (ΔH°) and entropy (ΔS°) were calculated using the Van’t Hoff plot. The polymer beads were characterized using Fourier Transform Infrared Spectroscopy (FTIR) and their morphology was determined by scanning electron microscopy (SEM).     

Lead biosorption by different morphologies of fungus Mucor indicus

Biosorption characteristics of Pb⁺² ions from aqueous solution were investigated using fungus Mucor indicus biomass treated with NaOH. Biosorption was measured as a function of biomass morphology, pH, biomass concentration, contact time, and metal concentration. The morphology of M. indicus biomass was manipulated towards filamentous or yeast-like forms. The highest and lowest biosorption capacities were observed for purely filamentous and yeast-like forms, respectively. Models of Langmuir, Freundlich, Temkin, and Scachard were applied to describe adsorption isotherm and fitted appropriately. Biosorption kinetics was successfully described using Ho’s pseudo-second-order model. Maximum and minimum values of biosorption capacity of Pb²⁺ were 22.1 and 12.1 mg g⁻¹ for purely filamentous and yeast-like morphologies, respectively. Increasing pH resulted in higher biosorption of Pb⁺² ions up to pH 5.5. Biosorption capacity of individual Pb⁺² ions was reduced in the presence of other metal ions in bi- or multi-metal ion experiments. Metal ions adsorption by the biomass could be eluted effectively with HNO₃.     

Pressure dependence of activity and stability of dihydrofolate reductases of the deep-sea bacterium Moritella profunda and Escherichia coli

To understand the pressure-adaptation mechanism of deep-sea enzymes, we studied the effects of pressure on the enzyme activity and structural stability of dihydrofolate reductase (DHFR) of the deep-sea bacterium Moritella profunda (mpDHFR) in comparison with those of Escherichia coli (ecDHFR). mpDHFR exhibited optimal enzyme activity at 50 MPa whereas ecDHFR was monotonically inactivated by pressure, suggesting inherent pressure-adaptation mechanisms in mpDHFR. The secondary structure of apo-mpDHFR was stable up to 80 °C, as revealed by circular dichroism spectra. The free energy changes due to pressure and urea unfolding of apo-mpDHFR, determined by fluorescence spectroscopy, were smaller than those of ecDHFR, indicating the unstable structure of mpDHFR against pressure and urea despite the three-dimensional crystal structures of both DHFRs being almost the same. The respective volume changes due to pressure and urea unfolding were − 45 and − 53 ml/mol at 25 °C for mpDHFR, which were smaller (less negative) than the corresponding values of − 77 and − 85 ml/mol for ecDHFR. These volume changes can be ascribed to the difference in internal cavity and surface hydration of each DHFR. From these results, we assume that the native structure of mpDHFR is loosely packed and highly hydrated compared with that of ecDHFR in solution.     

Phenol degradation performance by isolated Bacillus cereus immobilized in alginate

Phenol degradation by Bacillus cereus AKG1 MTCC9817 and AKG2 MTCC 9818 was investigated and degradation kinetics are reported for the free and Ca-alginate gel-immobilized systems. The optimal pH for maximum phenol degradation by immobilized AKG1 and AKG2 was found to be 6.7 and 6.9, respectively, while 3% alginate was optimum for both the strains. The degradation of phenol by free as well as immobilized cells was comparable at lower concentrations of phenol (100–1000 mg l⁻¹). However, the degradation efficiency of the immobilized strains was higher than that of the free strains at higher phenol concentrations (1500–2000 mg l⁻¹), indicating the improved tolerance of the immobilized cells toward phenol toxicity. More than 50% of 2000 mg l⁻¹ phenol was degraded by immobilized AKG1 and AKG2 within 26 and 36 days, respectively. Degradation kinetics of phenol by free and immobilized cells are well represented by the Haldane and Yano model.     

Copper biosorption on Lyngbya putealis: Application of response surface methodology (RSM)

The potential use of biosorbent prepared from an indigenously isolated cyanobacterium, Lyngbya putealis, for the removal of copper from aqueous solution has been investigated under optimized conditions in this study. Batch mode experiments were performed to determine the adsorption equilibrium and kinetic behavior of copper in aqueous solution allowing the computation of kinetic parameters and maximum metal adsorption capacity. Influences of other parameters like initial metal ion concentration (10-100 mg l⁻¹), pH (2-8) and biosorbent dose (0.1-1.0 g/100 ml) on copper adsorption were also examined, using Box-Behnken design matrix. Very high regression coefficient between the variables and the response (R² = 0.9533) indicates excellent evaluation of experimental data by second order polynomial regression model. The response surface method indicated that 40-50 mg l⁻¹ initial copper concentration, 6.0-6.5 pH and biosorbent dose of 0.6-0.8 g/100 ml were optimal for biosorption of copper by biosorbent prepared from L. putealis. On the basis of experimental results and model parameters, it can be inferred that the biosorbent which has quite high biosorption capacity can be utilized for the removal of copper from aqueous solution.     

Conformation and stability of elastase from Atlantic cod, Gadus morhua

Metal binding and conformational stability characteristics of psychrophilic elastase (ACE) from Atlantic cod (Gadus morhua) has been investigated. Chelation to Ca²⁺ was found to be important for maintaining the biologically active conformation and for the thermal stability of the enzyme. However, presence of metal ions such as Zn²⁺, Fe³⁺ and Cu²⁺ was found to inhibit its hydrolytic activity and so did the chelating agent EDTA. Both pH and guanidinium chloride induced denaturation of the enzyme was followed by monitoring the changes in the tryptophan fluorescence. ACE exhibited a simple two-state unfolding pattern in both acidic and basic conditions with the midpoint of transition at pH values 4.08 and 10.29, respectively. Guanidinium chloride and heat induced denaturation of the enzyme was investigated at two pH values, 5.50 and 8.00, wherein the enzyme possesses similar tertiary structure but differ in its hydrolytic activity. Guanidinium chloride induced denaturation indicated that the enzyme unfolds with a C_m of 1.53 M at pH 8.0 and a ΔG_H2O of 6.91 kJ mol⁻¹ (28.65 J mol⁻¹ residue⁻¹) which is the lowest reported for psychrophilic enzymes investigated till-date. However, at pH 5.50, ΔG_H2O value is slightly lowered by 0.65 kJ mol⁻¹ consistent with the observed increase in the apparent quenching constant obtained with acrylamide. On the other hand, increase in T_m by 38.45 °C was observed for the enzyme at acid pH (5.50) in comparison to the heat induced unfolding at pH 8.0. The increase in the apparent T_m has been attributed to the possible weak intermolecular association of the enzyme molecules at moderately high temperatures that is favoured by the increase in the accessible surface area / dynamics under acidic conditions. The stability characteristics of ACE have been compared with the available data for mesophilic porcine pancreatic elastase and possible mechanism for the low temperature adaptation of ACE has been proposed.     

Biochemical degradation pathway of reactive blue 13 by Candida rugopelliculosa HXL-2

A strain HXL-2 from a lab-scale sequence batch reactor (SBR) was identified as Candida rugopelliculosa based on its physiological, biochemical characteristics, and 26S rDNA D1/D2 gene phylogenetic analysis. About 90% of the 50 mg/L Reactive blue 13(RB13) was degraded in 48 h after inoculation with strain HXL-2. The optimum efficiency of pH on decolorization was obtained at pH 5.The optimum efficiency temperature of C. rugopelliculosa HXL-2 decolorization RB13 was obtained at 28 °C. The color removal efficiency was obtained at 80.3% when the feed concentration reached 2000 mg/L. We first detected naphthalene-like compound is produced as degradation intermediate after the cleavage of RB13 azo bond, detected 1-chloro-3-aniline- 2,4,6-triazine. We proposed degradation pathway of Reactive blue 13 by Candida sp and proved RB13 degradation pathway by Candida sp. has some difference from RB13 degradation pathway by Pseudomonas sp.     

Competition between Lemna minuta and Lemna minor at different nutrient concentrations

We investigated the differential responses of invasive alien Lemna minuta and native Lemna minor to nutrient loading as well as the mechanism of competition between the species. The role of nutrients, species identity, species influence in determining the outcome of competition between the species was estimated using the Relative Growth Rate Difference (RGRD) model. The two species differed in their response to nutrient loading. The native L. minor responded indifferently to nutrient loading. The species Relative Growth Rate (RGR) was 0.10 d⁻¹, 0.11 d⁻¹ and 0.09 d⁻¹ in high, medium and low nutrients, respectively. On the other hand, the invasive L. minuta responded opportunistically to high nutrient availability and had an RGR of 0.13 d⁻¹, 0.10 d⁻¹ and 0.08 d⁻¹ in high, medium and low nutrients, respectively. As a result, the invasive species was dominant in high nutrient availability but lost to the native species at low nutrient availability. The invader formed approximately 60% and less than 50% of the stand final total dry biomass in high and low nutrient availability, respectively. Species RGR were reduced by both intra- and interspecific competition but intraspecific effects were stronger than interspecific effects. On the overall, the species significantly differed in their constant RGR. These differences in RGR between the species (species identity) and the differential response to nutrient loading were the main determinant of change in final biomass composition of these species in mixture. Species influence (competition) only had a small influence on the outcome of competition between the species. The observed species response to nutrient loading could be targeted in management of the invasive species. Lowering nutrients can be proposed to reduce the impact of the invasive L. minuta.     

Simultaneous Cr(VI) reduction and phenol degradation in pure cultures of Pseudomonas aeruginosa CCTCC AB91095

Simultaneous Cr(VI) reduction and phenol degradation were investigated in a reactor containing Pseudomonas aeruginosa CCTCC AB91095. Phenol was used as carbon source. P.aeruginosa utilized metabolites formed during phenol degradation as energy source for Cr(VI) reduction. Cr(VI) inhibited both Cr(VI) reduction and phenol degradation when Cr(VI) concentration exceeded the optimum value (20 mg/L), whereas phenol enhanced both Cr(VI) reduction and phenol degradation below the optimum initial concentration of 100 mg/L. Cr(III) was the predominant product of Cr(VI) reduction in cultures after incubation for 24 h. Both Cr(VI) reduction and phenol degradation were influenced by the amount of inocula. The concentration of Cr(VI) and phenol declined quickly from 20, 100 to 3.36, 29.51 mg/L in cultures containing of 5% (v/v) inoculum after incubation for 12 h, respectively. The whole study showed that P. aeruginosa is promising for the reduction of toxic Cr(VI) and degradation of organic pollutants simultaneously in the mineral liquid medium.     

Establishment of the introduced kelp Undaria pinnatifida in Tasmania depends on disturbance to native algal assemblages

Despite recent rapid increases in the occurrence of nonindigenous marine organisms in the marine environment, few studies have critically examined the invasion process for a marine species. Here we use manipulative experiments to examine processes of invasion for the Asian kelp Undaria pinnatifida (Harvey) Suringar at two sites on the east coast of Tasmania. Disturbance to reduce cover of the native algal canopy was found to be critical in the establishment of U. pinnatifida, while the presence of a stable native algal canopy inhibited invasion. In the first sporophyte growth season following disturbance of the canopy, U. pinnatifida recruited in high densities (up to 19 plants m⁻²) while remaining rare or absent in un-manipulated plots. The timing of disturbance was also important. U. pinnatifida recruited in higher densities in plots where the native canopy was removed immediately prior to the sporophyte growth season (winter 2000), compared with plots where the canopy was removed 6 months earlier during the period of spore release (spring 1999). Removal of the native canopy also resulted in a significant increase in cover of sediment on the substratum. In the second year following canopy removal, U. pinnatifida abundance declined significantly, associated with a substantial recovery of native canopy-forming species. A feature of the recovery of the native algal canopy was a significant shift in species composition. Species dominant prior to canopy removal showed little if any signs of recovery. The recovery was instead dominated by canopy-forming species that were either rare or absent in the study areas prior to manipulation of the canopy.     

Microbial treatment of high-strength perchlorate wastewater

To treat wastewater containing high concentrations of perchlorate, a perchlorate reducing-bacterial consortium was obtained by enrichment culture grown on high-strength perchlorate (1200 mg L⁻¹) feed medium, and was characterized in a sequence batch reactor (SBR) over a long-time operation. The consortium removed perchlorate in the SBR with high reduction rates (35-90 mg L⁻¹ h⁻¹) and stable removal efficiency over 200-day operations. The maximum specific perchlorate reduction rate (q_max), half saturation constant (K_s), and optimal pH range were 0.67 mg-perchlorate mg-dry cell weight⁻¹ h⁻¹, 193.8 mg-perchlorate L⁻¹, and pH 7-9, respectively. The perchlorate reduction yield was 0.48 mol-perchlorate mol-acetate⁻¹. A clone library prepared using the amplicons of cld gene encoding chlorate dismutase showed that the dominant (per)chlorate reducing bacteria in the consortium were Dechlorosoma sp. (53%), Ideonella sp. (28%), and Dechloromonas sp. (19%).     

Chromatic photoacclimation, photosynthetic electron transport and oxygen evolution in the Chlorophyll d-containing oxyphotobacterium Acaryochloris marina

Changes in photosynthetic pigment ratios showed that the Chlorophyll d-dominated oxyphotobacterium Acaryochloris marina was able to photoacclimate to different light regimes. Chl d per cell were higher in cultures grown under low irradiance and red or green light compared to those found when grown under high white light, but phycocyanin/Chl d and carotenoid/Chl d indices under the corresponding conditions were lower. Chl a, considered an accessory pigment in this organism, decreased respective to Chl d in low irradiance and low intensity non-white light sources. Blue diode PAM (Pulse Amplitude Modulation) fluorometry was able to be used to measure photosynthesis in Acaryochloris. Light response curves for Acaryochloris were created using both PAM and O₂ electrode. A linear relationship was found between electron transport rate (ETR), measured using a PAM fluorometer, and oxygen evolution (net and gross photosynthesis). Gross photosynthesis and ETR were directly proportional to one another. The optimum light for white light (quartz halogen) was about 206 ± 51 μmol m^− 2 s^− 1 (PAR) (Photosynthetically Active Radiation), whereas for red light (red diodes) the optimum light was lower (109 ± 27 μmol m^− 2 s^− 1 (PAR)). The maximum mean gross photosynthetic rate of Acaryochloris was 73 ± 7 μmol mg Chl d^− 1 h^− 1. The gross photosynthesis/respiration ratio (P_g/R) of Acaryochloris under optimum conditions was about 4.02 ± 1.69. The implications of our findings will be discussed in relation to how photosynthesis is regulated in Acaryochloris.     

Synthesis of CarAlg/MMt nanocomposite hydrogels and adsorption of cationic crystal violet

CarAlg/MMt nanocomposite hydrogels composed of kappa-carrageenan (Car) and sodium alginate (Alg) biopolymers were synthesized by incorporation of sodium montmorillonite (Na-MMt) nanoclay. Acrylamide (AAm), methylenebisacrylamide (MBA), and ammonium persulfate (APS) were used as monomer, crosslinker, and initiator, respectively. The structure and morphology of nanocomposites were characterized by XRD, SEM, and TEM techniques. The XRD results showed exfoliated MMt nanoclay and exfoliation of MMt was confirmed by TEM graph. The resulting nanocomposites were evaluated to remove cationic crystal violet (CV) dye from water. According to data, the adsorption capacity of nanocomposites was enhanced as the clay content was increased. The experimental data were analyzed according to both Langmuir and Freundlich models and experimental maximum adsorption capacity was obtained 88.8 mg g⁻¹. By studying the effect of pH on the dye adsorption capacity of nanocomposites, it was revealed that the adsorption capacity of nanocomposites was enhanced at acidic pHs as the Na-MMt nanoclay and kappa-carrageenan components were increased.     

α,β-dicarbonyl reduction by Saccharomycesd-arabinose dehydrogenase

An α,β-dicarbonyl reductase activity was purified from Saccharomyces cerevisiae and identified as the cytosolic enzyme d-Arabinose dehydrogenase (ARA1) by MALDI-TOF/TOF. Size exclusion chromatography analysis of recombinant Ara1p revealed that this protein formed a homodimer. Ara1p catalyzed the reduction of the reactive α,β-dicarbonyl compounds methylglyoxal, diacetyl, and pentanedione in a NADPH dependant manner. Ara1p had apparent K_m values of ∼ 14 mM, 7 mM and 4 mM for methylglyoxal, diacetyl and pentanedione respectively, with corresponding turnover rates of 4.4, 6.9 and 5.9 s^− 1 at pH 7.0. pH profiling showed that Ara1p had a pH optimum of 4.5 for the diacetyl reduction reaction. Ara1p also catalyzed the NADP⁺ dependant oxidation of acetoin; however this back reaction only occurred at alkaline pH values. That Ara1p was important for degradation of α,β-dicarbonyl substrates was further supported by the observation that ara1-Δ knockout yeast mutants exhibited a decreased growth rate phenotype in media containing diacetyl.     

Production of an Amylase-Sensitive Bacteriocin by an Atypical Leuconostoc paramesenteroides Strain

An atypical Leuconostoc paramesenteroides strain isolated from retail lamb produced a bacteriocin, leuconocin S, that was inactivated by α-amylase, trypsin, α-chymotrypsin, protease, and proteinase K but not by lipase or heat treatment at 60°C for 30 min. Supernatants from culture broths produced two glycoprotein bands on sodium dodecyl sulfate-polyacrylamide gels; these had molecular weights of 2,000 and 10,000 and activity against Lactobacillus sake ATCC 15521. The crude bacteriocin preparation was bacteriostatic and dissipated proton motive force. Bacteriocin activity was produced over a wide pH range (5.2 to 7.9) on buffered agar medium, with an optimum pH of pH 6.15. The optimum pH for production in broth was 6.5 to 7.0.