Organometallic chemistry of diphosphazanes. Rhodium(I) complexes of RN(PX2)2 (R = C6H5; X = OC6H5, OC6H4Br−p, R = CH3; X = OC6H5)

Reactions of [Rh(COD)Cl]₂ with the ligand RN(PX₂)₂ (1: R = C₆H₅; X = OC₆H₅) give mono- or disubstituted complexes of the type [Rh₂(COD)Cl₂{ν²−C₆H₅N(P(OC₆H₅)₂)₂}] or [RhCl{ν²−C₆H₅ N(P(OC₆H₅)₂)₂ }]₂ depending on the reaction conditions. Reaction of 1 with [Rh(CO)₂Cl]₂ gives the symmetric binuclear complex, [Rh(CO)Cl{μ−C₆H₅N(P(OC₆H₅)₂)₂} ₂, whereas the same reaction with 2 (R = CH₃; X = OC₆H₅) leads to the formation of an asymmetric complex of the type [Rh(CO)(μ−CO)Cl{μ−CH₃N(P(OC₆H₅)₂)₂}₂ containing both terminal and bridging CO groups. Interestingly the reaction of 3 (R = C₆H₅, X = OC₆H₄Br−p with either [Rh(COD)Cl]₂ or [Rh(CO)₂Cl]₂ leads only to the formation of the chlorine bridged binuclear complex, [RhCl{ν²−C₆H₅N(P(OC₆H₄Br−p)₂)₂}]₂. The structural elucidation of the complexes was carried out by elemental analyses, IR and ³¹P NMR spectroscopic data.     

Spectroscopic and electrical properties of the [W(C3Se5)3] anion complex (C3Se5 = 1,3-diselenole-2-selone-4,5-diselenolate) and the oxidized species

[NBuⁿ₄]₂[W(C₃Se₅)₃] (C₃Se₅²⁻ = 1,3-diselenole-2-selone-4,5- diselenolate(2−)) was prepared by the reaction of Na₂[C₃Se₅] with WCl₆ in ethanol, followed by addition of [NBuⁿ₄]Br. The cyclic voltammogram in dichloromethane exhibits two oxidation peaks at −0.04 and +0.03 V (versus SCE). The complex reacted with [Fe(C₅Me₅)₂][BF₄], iodine or [TTF]₃[BF₄]₂ (TTF^·+ = the tetrathiafulvalenium radical cation) in acetonitrile to afford the oxidized complexes [Fe(C₅Me₅)₂]_0.5[W(C₃Se₅)₃], [NBuⁿ₄]_0.1[W(C₃Se₅)₃] and [TTF]_0.5[W(C₃Se₅)₃], respectively. Current-controlled electrochemical oxidation of the complex in acetonitrile gave [NBuⁿ₄]_0.6[W(C₃Se₅)₃]. The oxidized complexes exhibit electrical conductivities of 4.7×10 ⁻⁵−1.5×10⁻³ S cm⁻¹ at room temperature measured for compacted pellets. Electronic absorption, IR and ESR spectra of these complexes are discussed.     

Dialkyl-μ-ethylidene-μ-methylene-bis(pentamethylcyclopentadienyl)-dirhodium complexes: synthesis, spectra and decomposition reactions

The dialkyl-μ-ethylidene-μ-methylene-bis (pentamethylcyclopentadienyl)-dirhodium complexes [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe) (R)₂] (4, P=Me; 5, Et; 6, n-Bu; 7, CH=CH₂; and 8, Z-CH=CHMe) have been prepared from RMgBr and [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe)(X)₂] (2, X=Cl; 3, X=Br). Structures deduced from the NMR spectra show that the dialkyl complexes can exist in one trans and two cis forms. The decomposition of the dimethyl complex 4 is compared with that of the related di-μ-methylene complex; it reacts readily (30°C, MeCN solution) in the presence of one-electron oxidisers to give propene and methane and a little ethene and some butenes. Mass-spectrometric analysis of the ¹³C labelling in the organics originating from [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe) (¹³CH₃)₂] shows that methane derives from the Rh---Me, ethene half from the ethylidene and half from coupling of Rh-methyl and a bridging methylene, while the propene arises almost entirely from the ethylidene and a rhodium methyl. The butenes come from coupling of ethylidene, methylene and a Rh-methyl, but only quite small amounts are formed; thus C+C coupling is the major decomposition path for the μ-ethylidenes, in contrast to the di-μ-methylene complexes where C+C+C coupling predominates. The divinyl complex [{(C₅Me₅)Rh}₂(μ-CH₂)(μ-CHMe) (CH=CH₂)₂] also underwent internal C+C coupling on reaction with AgBF₄ in MeCN to give a mixture of the allyl and methylallyl cations [(C₅Me₅)Rh(η³-CH₂CHCHR)(MeCN)]⁺(10, R=H; 11, R=Me).     

Synthesis and structure determination of some platinum (II) complexes with hydrophilic carboxylated tertiary phosphine ligands

[Pt(COD)Cl₂] (1) reacts with PPh₂(C₆H₄COOH) (2a,b,c), PPh₂(C₆H₄COONa) (2d), PPh(C₆H₄COOH)₂ (4b,c) and P(C₆H₄COOH)₃ (6b,c) with formation of the corresponding complexes [Pt(L)₂Cl₂] (3a,b,c,d, 5b,c, 7b,c). Halide abstraction from 3a by Ag⁺ promotes coordination of the ortho-carboxylate function to platinum, yielding [ -2)}{PPh₂(C₆H₄COOH-2)}Cl] (bd8) and [ovbar|{PPh₂(C₆H₄COO-2)}₂] (bd9). Reaction of 1 with CO and 2a or 2b gives [Pt(CO)(L)Cl₂] (10a,b), wherea 1 and 2,3-bis(diphenylphosphino) maleic anhydride yields

Full-size image

(bd12) and [Pt{Ph₂PC(COOH)=C(COOMe)-PPh₂}Cl₂] (13). The ¹H, ¹³C and ³¹P NMR spectra are reported and discussed. The X-ray structural analysis of 3b showed the compound to be monoclinic, space group P2₁/n, Z=4, with a=1038.5(3), B=1792.6(4), C=2311.5(4) pm, β=91.6(2)° and D_calc=1.353 g cm⁻³. The structure was solved from 4832 observed reflections with F₀ > 4 σ(F₀) and refined to a final R value of 0.0743. The Pt atom is surrounded by two Cl and two P atoms in a square planar arrangement.     

Ligand induced P---H bond formation and a comparison of the reactivity of two isomers of the carbonyl hydride [Pt2(μ-PBu2)2(H)(CO)(PBu2H)]CF3SO3

The Pt₂ ^(II) isomeric terminal hydrides [(CO)(H)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)]CF₃SO₃ (1a), and [(CO)Pt(μ-PBu^t ₂)₂Pt(PBu^t ₂H)(H)]CF₃SO₃ (1b), react rapidly with 1 atm of carbon monoxide to give the same mixture of two isomers of the Pt₂ ^(I) dicarbonyl [Pt₂(μ-PBu^t ₂)(CO)₂(PBu^t ₂H)₂]CF₃SO₃ (3-Pt); the solid state structure of the isomer bearing the carbonyl ligands pseudo-trans to the bridging phosphide was solved by X-ray diffraction. A remarkable difference was instead found between the reactivity of 1a and 1b towards carbon disulfide or isoprene. In both cases 1b reacts slowly to afford [Pt₂(μ-PBu^t ₂)(μ,η²,η²-CS₂)(PBu^t ₂H)₂]CF₃SO₃ (4-Pt), and [Pt₂(μ-PBu^t ₂)(μ,η²,η²-isoprene) (PBu^t ₂H)₂]CF₃SO₃ (6-Pt), respectively. In the same experimental conditions, 1a is totally inert. A common mechanism, proceeding through the preassociation of the incoming ligand followed by the P---H bond formation between one of the bridging P atoms and the hydride ligand, has been suggested for these reactions.     

Hydride complexes of platinum(II) containing unsymmetrical di(phosphine) ligands: synthesis, characterization and evidence for pairwise addition of hydrogen based on parahydrogen induced polarization

Unsymmetrical di(phosphine) ligands (dpp)₂Rop (1a, b = bis(diphenylphosphino)-2-alkyl-3-oxapropane (alkyl = methyl and ethyl)) and (dpp)₂oCy (1c = trans-2-diphenylphosphinocyclohexyl diphenylphosphinite) and their Pt(II) dichloride complexes, PtCl₂((dpp)₂mop) (2a), PtCl₂((dpp)₂eop) (2b) and PtCl₂((dpp)₂oCy) (2c), have been synthesized and characterized by NMR spectroscopy. The crystal structures of 2b and 2c show that the geometry about the platinum centers is square planar. In 2b, the metal and di(phosphine) ligand chelate ring are in a chair conformation, whereas in 2c, the chelate ring conformation is a skewed boat. Initial reaction of sodium borohydride with 2a, b, c yields the monohydride monochloride complexes PtHCl((dpp)₂mop) (5a), PtHCl((dpp)₂eop) (5b) and PtHCl((dpp)₂oCy) (5c). At longer reaction times, fluxional dimeric species are obtained, [PtH((dpp)₂mop)]₂ (4a), [PtH((dpp)₂eop)]₂ (4b) and [PtH((dpp)₂oCy)]₂ (4c),and in the case of 4c two different isomers exist. The dihydride complexes PtH₂((dpp)₂mop) (3a), PtH₂((dpp)₂eop) (3b) and PtH₂((dpp)₂oCy) (3c), are prepared by further reaction of NaBH₄ and 2. Hydrogen cycling is facile in the dihydride complexes 3a, b, c, and oxidative addition of H₂ proceeds in a pairwise manner as determined by the observation of parahydrogen induced polarization (PHIP) in the ¹H NMR spectra. The reductive elimination of H₂ is also shown to be concerted by reaction of dihydride complexes with D₂. Crystal data: 2b (C₃₀H₃₂Cl₆OP₂Pt), monoclinic, space group P2₁/c (No. 14), a = 13.7040(1), b = 11.3430(7), c = 21.3880(9) Å, β = 97.923(9)°, V = 3292.9(2) ų and Z = 4; 2c (C₃₀H₃₀Cl₂OP₂Pt), monoclinic, space group P2₁ (No. 4), a = 11.7360(2), b = 8.4311(2), c = 14.2789(2) Å, β = 101.290(1)°, V = 1385.52(4) ų and Z = 2.     

Slippage of η-allenyl/propargyl to an η structure and tautomerization of η-propargyl to η-allenyl in ligand addition and substitution reactions of platinum(II) complexes

Reactions of [(PPh₃)₂Pt(η³-CH₂CCPh)]OTf with each of PMe₃, CO and Br⁻ result in the addition of these species to the metal and a change in hapticity of the η³-CH₂CCPh to η¹-CH₂CCPh or η¹-C(Ph)=C=CH₂. Thus, PMe₃ affords [(PMe₃)₃Pt(η¹-C(Ph)=C=CH₂)]⁺, CO gives both [trans-(PPh₃)₂Pt(CO)(η¹-CH₂CCPh)]⁺ and [trans-(PPh₃)₂Pt(CO)(η¹-C(Ph)=C=CH₂)]⁺, and LiBr yields cis-(PPh₃)₂PtBr(η¹-CH₂CCPh), which undergoes isomerization to trans-(PPh₃)₂PtBr(η¹-CH₂CCPh). Substitution reactions of cis- and trans-(PPh₃)₂PtBr(η¹-CH₂CCPh) each lead to tautomerization of η¹-CH₂CCPh to η¹-C(Ph)=C=CH₂, with trans-(PPh₃)₂PtBr(η¹-CH₂CCPh) affording [(PMe₃)₃Pt(η¹-C(Ph)=C=CH₂)]⁺ at ambient temperature and the slower reacting cis isomer giving [trans-(PPh₃)(PMe₃)₂Pt(η¹-C(Ph)=C=CH₂)]⁺ at 54 °C . All new complexes were characterized by a combination of elemental analysis, FAB mas spectrometry and IR and NMR (¹H, ¹³C{¹H} and ³¹P{¹H}) spectroscopy. The structure of [(PMe₃)₃Pt(η¹-C(Ph)=C=CH₂)]BPh₄·0.5MeOH was determined by single-crystal X-ray diffraction analysis.     

Reactions of the haloalcohols HO(CH2)nCl (n = 2, 3) with platinum(II) - alkynyl and -alkyne complexes. X-ray crystal structure of trans-[Pt(Me) {C(OCH2CH2Cl) (CH2Ph)} (PPh3)2] [BF4]

The chloro complexes trans-[Pt(Me)(Cl)(PPh₃)₂], after treatment with AgBF₄, react with 1-alkynes HC---C---R in the presence of NEt₃ to afford the corresponding acetylide derivatives trans-[Pt(Me) (C---C---R) (PPh₃)₂] (R = p-tolyl (1), Ph (2), C(CH₃)₃ (3)). These complexes, with the exception of the t-butylacetylide complex, react with the chloroalcohols HO(CH₂)_nCl (n = 2, 3) in the presence of 1 equiv. of HBF₄ to afford the alkyl(chloroalkoxy)carbene complexes trans-[Pt(Me) {C[O(CH₂)_nCl](CH₂R) } (PPh₃)₂][BF₄] (R = p-tolyl, N = 2 (4), N = 3 (5); R=Ph, N = 2 (6)). A similar reaction of the bis(acetylide) complex trans-[Pt(C---C---Ph)₂(PMe₂Ph)₂] with 2 equiv. HBF₄ and 3-chloro-1-propanol affords trans-[Pt(C---CPh) {C(OCH₂CH₂CH₂Cl)(CH₂Ph) } (PMe₂Ph)₂][BF₄] (7). T alkyl(chloroalkoxy)-carbene complex trans-[Pt(Me) {C(OCH₂CH₂Cl)(CH₂Ph) } (PPh₃)₂][BF₄] (8) is formed by reaction of trans-[Pt(Me)(Cl)(PPh₃)₂], after treatment with AgBF₄ in HOCH₂CH₂Cl, with phenylacetylene in the presence of 1 equiv. of n-BuLi. The reaction of the dimer [Pt(Cl)(μ-Cl)(PMe₂Ph)]₂ with p-tolylacetylene and 3-chloro-1-propanol yields cis-[PtCl₂{C(OCH₂CH₂CH₂Cl)(CH₂C₆H₄-p-Me}(PMe₂Ph)] (9). The X-ray molecular structure of (8) has been determined. It crystallizes in the orthorhombic system, space group Pna2₁, with a = 11.785(2), B = 29.418(4), C = 15.409(3) Å, V = 4889(1) ų and Z = 4. The carbene ligand is perpendicular to the Pt(II) coordination plane; the PtC(carbene) bond distance is 2.01(1) Å and the short C(carbene)-O bond distance of 1.30(1) Å suggests extensive electronic delocalization within the Pt---C(carbene)---O moietry.     

Ligand-mediated metal-metal interactions in (ν:ν-fulvalene) bis (dicarbonylcobalt) and rhodium complexes

Gas phase photoelectron spectroscopy (PES) is used to investigate the bonding and electronic structure in (fv) [M(CO)₂]₂ (fv = fulvalene, η⁵:η⁵-C₁₀H₈²⁻; M = Co, Rh). The results for these bimetallic complexes are also compared to those for the analogous monometallic complexes CpM(CO)₂ (Cp = η⁵−C₅H₅⁻; M = Co, Rh) which have been reported previously. The low valence ionization patterns observed for CpCo(CO)₂ and (fv)[Co(CO)₂]₂ are very similar, indicating that there is little electronic interaction between the two metals of the dicobalt complex. The spectrum of (fv)[Rh(CO)₂]₂ also is very similar to the spectrum of CpRh(CO)₂, except that the first metal ionizations in the bimetallic rhodium compound show a significant splitting (0.45 eV). This splitting is due to electronic interaction between the two metal centers which occurs via communication through the fulvalene π system. The differences in electronic structure are compared to the differences in electrochemical behavior of the Co and Rh fulvalene complexes.     

Model reactions of a carbonylation catalyst: phosphite induced migratory CO insertion in [MeIr(CO)2I3]

Carbonylation of the anionic iridium(III) methyl complex, [MeIr(CO)₂I₃]⁻ (1) is an important step in the new iridium-based process for acetic acid manufacture. A model study of the migratory insertion reactions of 1 with P-donor ligands is reported. Complex 1 reacts with phosphites to give neutral acetyl complexes, [Ir(COMe)(CO)I₂L₂] (L = P(OPh)₃ (2), P(OMe)₃ (3)). Complex 2 has been isolated and fully characterised from the reaction of Ph₄As[MeIr(CO)₂I₃] with AgBF₄ and P(OPh)₃; comparison of spectroscopic properties suggests an analogous formulation for 3. IR and ³¹P NMR spectroscopy indicate initial formation of unstable isomers of 2 which isomerise to the thermodynamic product with trans phosphite ligands. Kinetic measurements for the reactions of 1 with phosphites in CH₂Cl₂ show first order dependence on [1], only when the reactions are carried out in the presence of excess iodide. The rates exhibit a saturation dependence on [L] and are inhibited by iodide. The reactions are accelerated by addition of alcohols (e.g. 18× enhancement for L = P (OMe)₃ in 1:3 MeOH-CH₂Cl₂). A reaction mechanism is proposed which involves substitution of an iodide ligand by phosphite, prior to migratory CO insertion. The observed rate constants fit well to a rate law derived from this mechanism. Analysis of the kinetic data shows that k₁, the rate constant for iodide dissociation, is independent of L, but is increased by a factor of 18 on adding 25% MeOH to CH₂Cl₂. Activation parameters for the k₁ step are ΔH^≠ = 71 (±3) kJ mol⁻, ΔS^≠ = −81 (±9) J mol⁻¹ K⁻¹ in CH₂Cl₂ and ΔH^≠ = 60(±4) kJ mol⁻¹, ΔS^≠ = −93(± 12) J mol⁻¹ K⁻¹ in 1:3 MeOH-CH₂Cl₂. Solvent assistance of the iodide dissociation step gives the observed rate enhancement in protic solvents. The mechanism is similar to that proposed for the carbonylation of 1.     

Heterobimetallic chloro bridgedcomplexes of (η:η−C10H16)-ruthenium(IV) with palladium(II), platinum(II), rhodium(III), iridium(III), copper(I) and rhodium(I)

Metathesis of [(η³:η³−C₁₀H₁₆)Ru(Cl) (μ−Cl)]₂ (1) with [R₃P) (Cl)M(μ-Cl)]₂ (M = Pd, Pt), [Me₂NCH₂C₆H₄Pd(μ-Cl)]₂ and [(OC)₂Rh(μ-Cl)]₂ affords the heterobimetallic chloro bridged complexes (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂M(PR₃)(Cl) (M = Pd, Pt), (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂PdC₆H₄CH₂NMe₂ and (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂Rh(CO)₂, respectively. Complex 1 reacts with [Cp^*M(Cl) (μ-Cl)]₂ (M = Rh, Ir), [p-cymene Ru(Cl) (μ-Cl]₂ and [(Cy₃P)Cu(μ-Cl)]₂ to give an equilibrium of the heterobimetallic complexes and of educts. The structures of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂Pd(PR₃) (Cl) (R = Et, Bu) and of one diastereoisomer of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂IrCp^*(Cl) were determined by X-ray diffraction.     

Interactions between thiamine and large anions. Crystal structures of (H-thiamine)[Pt(SCN)4] · 3H2O and (H-thiamine)[Pt(SCN)6] · H2O

The reaction of thiamine with K₂Pt^IICl₄ and with Pt^IVCl₄ in the presence of excess NaSCN in aqueous solution gave thiamine salts, (H-thiamine)[Pt(SCN)₄] · 3H₂O (1) and (H-thiamine)[Pt(SCN)₆] · H₂O (2), respectively, structures of which have been determined by X-ray diffraction. The thiamine molecule adopts the usual F conformation in each salt. In 1, [Pt(SCN)₄]²⁻ ions act as large planar spacers in the crystal lattice and interact scarcely with thiamine, except for a hydrogen bonding with the terminal hydroxy O(5γ). Instead, water molecules form two types of host–guest-like interactions with the pyrimidine and the thiazolium moieties of a thiamine molecule, one being a C(2)–Hwaterpyrimidine bridge and the other being an N(4′)–Hwaterthiazolium bridge. In 2, despite the much larger ion size, octahedral [Pt(SCN)₆]²⁻ ions form a C(2)–Hanionpyrimidine bridge and an N(4′)–Hanionthiazolium bridge. An additional hydrogen bonding between the anion and the terminal O(5γ) of thiamine creates a hydrogen-bonded macrocyclic ring {thiaminium–[Pt(SCN)₆]²⁻}₂, a supramolecule.     

The kinetics and energetics of formation of a molecular hydrogen complex involving a dinuclear ruthenium(II) centre

The reversible equilibrium conversion under H₂ of [RuCl(dppb) (μ-Cl)]₂ (1) to generate (η²-H₂) (dppb) (μ-Cl)₃RuCl(dppb) in CH₂Cl₂ (dppb = Ph₂P(CH₂)₄PPh₂) has been studied at 0–25 °C by UV-Vis and ³¹P{¹H} NMR spectroscopy, and by stoppe kinetics; the equilibrium constant and corresponding thermodynamic parameters, and the forward and reverse rate constants at 25 °C have been determined. A measured ΔH° value of 0 kJ mol⁻¹ allows for an estimation of an exothermicity of 60 kJ mol⁻¹ for binding an η²-H₂ at an Ru(II) centre; a ΔS° value of 60 J mol⁻¹ K⁻¹ indicates that in solution 1 contain s coordinated CH₂Cl₂. The kinetic and thermodynamic data are compared to those obtained from a previously studied hydrogenation of styrene catalyzed by 1. Preliminary findings on related systems containing Ph₂P(CH₂)₃PPh₂ and (C₆H₁₁)₂P(C₆H₁₁)₂ are also noted.     

Synthesis, crystal structures and magnetic studies of dicyanamide bridged two new 1D copper(II) complexes

Two new dicyanamide bridged 1D polynuclear copper(II) complexes [Cu(L¹){μ_1,5-N(CN)₂}]_n (1) [L¹H = C₆H₅C(O)NHNC(CH₃)C₅H₄N] and [Cu(L²){μ_1,5-N(CN)₂}]_n (2) [L²H=C₆H₅C(O)CHC(CH₃)NCH₂CH₂N(CH₃)₂] have been synthesised and structures of both the complexes and their crystal packing arrangements have been established by X-ray crystallography. For complex 1, a tridentate hydrazone ligand (L¹H) obtained by the condensation of benzhydrazide and 2-acetylpyridine is used, whereas a tridentate Schiff base (L²H) derived from benzoylacetone and 2-dimethylaminoethylamine is employed for the preparation of complex 2. Variable temperature magnetic susceptibility measurement studies indicate there are weak antiferromagnetic interactions with J values −0.10 and −1.41 cm⁻¹ for 1 and 2, respectively.     

The synthesis and structures of tantalum complexes that contain a triamido or a diamidoamine ligand

Addition of (Me₃SiNHCH₂CH₂)₂NH (H₃[N₃(TMS)]) or (Me₃SiNH-o-C₆H₄)₂NH (H₃[ArN₃(TMS)]) to a solution of TaMe₅ yields [N₃(TMS)]TaMe₂ or [ArN₃(TMS)]TaMe₂, respectively. An X-ray study of [ArN₃(TMS)]TaMe₂ showed it to have an approximate trigonal bipyramidal structure in which the two methyl groups are in equatorial positions and the triamido ligand is approximately planar. Addition of (C₆F₅NHCH₂CH₂)₂NH (H₃[N₃(C₆F₅)]) to TaMe₅ yields first [(C₆F₅NCH₂CH₂)₂NH]TaMe₃, which then decomposes to [(C₆F₅NCH₂CH₂)₂N]TaMe₂. An X-ray study of [(C₆F₅NCH₂CH₂)₂N]TaMe₂ shows it to be approximately a trigonal bipyramid, but the C₆F₅ rings are oriented so that they lie approximately in the TaN₃ plane and two ortho fluorines interact weakly with the metal. Trimethylaluminum attacks the central nitrogen atom in [N₃(TMS)]TaMe₂ to give [(Me₃SiNCH₂CH₂)₂NAlMe₃]TaMe₂, an X-ray study of which shows it to be a trigonal bipyramidal species similar to the first two structures, except that the C-Ta-C bond angle is approximately 30° smaller (106.6(12)°). Addition of B(C₆F₅)₃ to [(C₆F₅NCH₂CH₂)₂NH]TaMe₃ yields {[(C₆F₅NCH₂CH₂)₂NH]TaMe₂}⁺ {B(C₆F₅)₃Me}⁻, the structure of which most closely resembles that of [(Me₃SiNCH₂CH₂)₂NAlMe₃]TaMe₂ in that the C-Ta-C angle is 102.0(6)°. The C₆F₅ rings in {[(C₆F₅NCH₂CH₂)₂NH]TaMe₂}⁺ are turned roughly perpendicular to the TaN₃ plane, i.e. ortho fluorines do not interact with the metal in this molecule.     

Reactivity of {(Ph3P)Pt[μ-η-H---SiH(Ar)]}2 (Ar=2-isopropyl-6-methylphenyl) with phosphines. X-ray crystal structure of trans-{(dppe)Pt[μ-SiH(Ar)]}2

The dinuclear Pt---Si complex {(Ph₃P)Pt{μ-η²-H---SiH(IMP)]}₂ (trans-1a–cis-1b=3:1; IMP=2-isopropyl-6-methylphenyl) reacted with basic phosphines such as 1,2-bis(diphenylphosphino)ethane (dppe) and dimethylphenylphosphine (PMe₂Ph) to afford different dinuclear Pt---Si complexes with loss of H₂, {(P)₂Pt[μ-SiH(IMP)]}₂ [P=dppe, trans-2a (major), cis-2b (trace); PMe₂Ph, 3 (trans only)]. Complexes 2 and 3 were characterized by multinuclear NMR spectroscopy and X-ray crystallography (2a). In contrast, the reaction of 1a,b with the sterically demanding tricyclohexylphosphine (PCy₃) afforded {(Cy₃P)Pt{μ-η²-H---SiH(IMP)]}₂ (trans-4a–cis-4b 2:1) analogous to 1a,b where the central Pt₂Si₂(μ-H)₂ core remains intact but the PPh₃ ligands have been replaced by PCy₃. Complexes 4a and 4b was characterized by multinuclear NMR and IR spectroscopies.     

Mono-η complexes of chromium(II) and chromium(0). Electron demanding substituents, structural and spectroscopic data comparisons

Using thermal and photochemical methods a series of new chromium complexes has been prepared: (ν⁶-p-C₆H₄F₂)Cr(CO)₃; (ν⁶-C₆H₅CF₃)Cr(CO)₃; [m-C₆H₄(CF₃)₂]Cr(CO)₃; (ν⁶-C₆H₅F)Cr(CO)₂H(SiCl₃); (ν⁶-C₆H₅F)Cr(CO)₂(SiCl₃)₂; (p-C₆H₄F₂)Cr(CO)₂-H(SiCl₃); (C₆H₅CF₃)Cr(CO)₂H(SiCl₃(p-C₆H₄F₂)Cr(CO)₂(SiCl₃)₂; C₆H₅CF₃)Cr(CO)₂(SiCl₃)₂; [m-C₆H₄(CF₃)₂]Cr(CO)₂-H(SiCl₃); [m-C₆H₄(CF₃)₂]Cr(CO)₂(SiCl₃)₂. Two compounds were structurally characterized by X-ray diffraction. These data combined with IR and ¹H NMR have allowed assessment of some of the electronic and steric effects. The Cr-arene bond is considerably longer in the Cr(II) derivatives than in the Cr(0) species. Also the Cr center, as might be expected, is less electron rich in the Cr(II) dicarbonyl disilyl derivatives. The ν⁶-p-C₆H₄F₂ ligands are slightly folded so that the C---F carbons are moved further away from the Cr center. Comparison of structural and electronic effects is made with a series of similar chromium compounds reported in the literature. These new (arene)Cr(II) derivatives possess more labile ν⁶-arene ligands, which promise a rich chemistry at the chromium center.     

The coordination chemistry of cationic main group clusters: syntheses and structures of [Fe3(Se2)2(CO)10] and [Fe4(Se2)3(CO)12]

The reactions of the polysulfur and selenium cationic clusters S₈²⁺ and Se₈²⁺ with various iron carbonyls were investigated. Several new chalcogen containing iron carbonyl cluster cations were isolated, depending on the nature of the counteranion. In the presence of SbF₆⁻ as a counterion, the cluster [Fe₃(E₂)₂(CO)₁₀] [SbF₆]₂·SO₂ (E = S, Se) could be isolated from the reaction of E₈²⁺ and excess iron carbonyl. The cluster is a picnic-basket shaped molecule of two iron centers linked by two Se₂ groups, with the whole fragment capped by an Fe(CO)₄ group. Crystallographic data for C₁₀O₁₂Fe₃Se₄Sb₂F₁₂S (I): space group monoclinic P2₁/c, A = 11.810(9), b = 24.023(6), c = 10.853(7) Å, β = 107.15(5)°, V = 2942(3) ų, Z = 4, R = 0.0426, R_w = 0.0503. When Sb₂F₁₁⁻ is present as the counterion, or Se₄[Sb₂F₁₁]₂ is used as the cluster cation source, a different cluster can be isolated, which has the formula [Fe₄(Se₂)₃(CO)₁₂] [SbF₆]₂·3SO₂. The dication contains two Fe₂Se₂ fragments bridged by an Se₂ group. Crystallographic data for C₁₂O₁₈Fe₄Se₆Sb₂F₁₂S₃ (III): space group triclinic , b = 18.400(9), C = 10.253(4) Å, = 93.10(4), β = 103.74(3), γ = 93.98(3)°, V = 1995(1) ų, Z = 2, R = 0.0328, R_w = 0.0325. The CO stretches in the IR spectrum all show a large shift to higher wavenumbers, suggesting almost no τ backbonding from the metals. This also correlates with the observed bond distances. All the compounds are extremely sensitive to air and water, and readily lose SO₂ when removed from the solvent. Thus all the crystals were handled at −100°C. The clusters seem to be either insoluble or unstable in all solvents investigated.     

Synthesis, immobilization and catalytic activity of some silylated cyclopentadienyl rhodium(I) complexes

The mixture of isomers of silylated cyclopentadiene derivative C₅H₅CH₂CH₂Si(OMe)₃ (1) has been used for the syntheses of the mononuclear Rh(I) complexes [η⁵-C₅H₄(CH₂)₂Si(OMe)₃]Rh(CO)₂ (3). [η⁵-C₅H₄(CH₂)₂Si(OMe)₃]Rh(COD) (4) and [η⁵-C₅H₄(CH₂)₂Si(OMe)₃]Rh(CO)(PPh₃) (5). Upon entrapment of 3–5 in silica sol-gel matrices, air stable, leach-proof and recyclable catalysts 6–8 resulted. Their catalytic activities in some hydrogenation processes were compared with those of the non-immobilized complexes 3–5, as well as with those of homogeneous and heterogenized non-silylated analogs, 9–14.     

Hetero-polynuclear complexes containing bridging diphenylphosphino-alkenes and -alkynes. The crystal structure of an Rh2{μ−ν:ν−P(Ph2) (CH2)3C≡CR}Co2 complex

The phosphinoalkenes Ph₂P(CH₂)_nCH=CH₂ (n= 1, 2, 3) and phosphinoalkynes Ph₂P(CH₂)_n C≡CR (R = H, N = 2, 3; R = CH₃, N = 1) have been prepared and reacted with the dirhodium complex (η−C₅H₅)₂Rh₂(μ−CO) (μ−η²−CF₃C₂CF₃). Six new complexes of the type (ν−C₅H₅)₂(Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃)L, where L is a P-coordinated phosphinoalkene, or phosphinoalkyne have been isolated and fully characterized; the carbonyl and phosphine ligands are predominantly trans on the Rh---Rh bond, but there is spectroscopic evidence that a small amount of the cis-isomer is formed also. Treatment of the dirhodium-phosphinoalkene complexes with (η−CH₃C₅H₄)Mn(CO)₂thf resulted in coordination of the manganese to the alkene function. The Rh₂---Mn complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂P(CH₂)₃CH=CH₂} (η−CH₃C₅H₄)Mn(CO)₂] was fully characterized. Simi treatment of the dirhodium-phosphinoalkyne complexes with Co₂(CO)₈ resulted in the coordination of Co₂(CO)₆ to the alkyne function. The Rh₂---Co₂ complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂PCH₂C≡CCH₃}Co₂(CO)₂], C₃₇H₂₅Co₂F₆O₇PRh₂, was fully characteriz spectroscopically, and the molecular structure of this complex was determined by a single crystal X-ray diffraction study. It is triclinic, space group (C_i¹, No. 2) with a = 18.454(6), B = 11.418(3), C = 10.124(3) Å, = 112.16(2), β = 102.34(3), γ = 91.62(3)°, Z = 2. Conventional R on |F| was 0.052 fo observed (I > 3σ(I)) reflections. The Rh₂ and Co₂ parts of the molecule are distinct, the carbonyl and phosphine are mutually trans on the Rh---Rh bond, and the orientations of the alkynes are parallel for Rh₂ and perpendicular for Co₂. Attempts to induce Rh₂Co₂ cluster formation were unsuccessful.