Comparison of Immobilized and Free Amyloglucosidase Process in Glucose SyrupsProduction from White Sorghum Starch

Optimum conditions for glucose syrups production from white sorghum were studied through sequential liquefaction and saccharification processes. In the liquefaction process, a maximum dextrose equivalent (DE) of 10.98 % was achieved using 30 % (w/v) of starch and Termamyl ɑ-amylase from Bacillus licheniformis. Saccharification was performed by free and immobilized amyloglucosidase from Rhizopus mold at 1 % (w/v). DE values of 88.32 % and 79.95 % were obtained from 30 % (w/v) of starch with, respectively, free and immobilized enzyme. The immobilized Amyloglucosidase in calcium alginate beads showed reusable capacity for up to 6 cycles with 46 % of the original activity retained. The kinetic behaviour of immobilized and free enzyme gives K_m value of 22.13 and 16.55 mg mL⁻¹ and V_max of 0.69 and 1.61 mg mL⁻¹ min⁻¹, respectively. The hydrolysis yield using immobilized amyloglucosidase were lower than that of the free one. However, it is relevant to reuse enzyme without losing activity in order to trim down the overall costs of enzymatic bioprocesses as starch transformation into required products in industrial manufacturing. Hydrolysis of sorghum starch using immobilized amyloglucosidase represents a promising alternative towards the development of the glucose syrups production process and its utilization in various industries.     

Graft copolymerization of acrylamide on chitosan-co-chitin and its application for immobilization of Aspergillus sp. RL2Ct cutinase

The synthesis of chitosan (Chs) and chitin (Chi) copolymer and grafting of acrylamide (AAm) onto the synthesized copolymer have been carried out by chemical methods. The grafted copolymer was characterized by FTIR, SEM and XRD. The extracellular cutinase of Aspergillus sp. RL2Ct (E.C. 3.1.1.3) was purified to 4.46 fold with 16.1% yield using acetone precipitation and DEAE sepharose ion exchange chromatography. It was immobilized by adsorption on the grafted copolymer. The immobilized enzyme was found to be more stable then the free enzyme and has a good binding efficiency (78.8%) with the grafted copolymer. The kinetic parameters K_M and V_max for free and immobilized cutinase were found to be 0.55 mM and 1410 μmol min⁻¹ mg⁻¹ protein, 2.99 mM and 996 μmol min⁻¹ mg⁻¹ protein, respectively. The immobilized cutinase was recycled 64 times without considerable loss of activity. The matrix (Chs-co-Chi-g-poly(AAm)) prepared and cutinase immobilized on the matrix have potential applications in enzyme immobilization and organic synthesis respectively.     

Production,purification and characterisation of a novel halostable xylanase from Bacillus sp. NTU-06

Bacillus sp. NTU-06 was used to produce xylanase, which is an important industrial enzyme used in the pulp and paper industry. The enzyme was purified by fast protein liquid chromatography (FPLC) and had a molecular mass of 24 kDa. The enzyme was active over a concentration range of 0–20% sodium chloride in culture broth, although its activity was optimal in 5% sodium chloride. A salinity stability test showed that 43% of the enzyme activity was retained after 4 h in 20% sodium chloride. Xylanase activity was maximal at pH 8.0 and 40°C. The enzyme was somewhat thermostable, retaining 20% of the original activity after incubation at 70°C for 4 h. The xylanase had K_m and V_max values of 3.45 mg mL⁻¹ and 387.3 µmol min⁻¹mg⁻¹, respectively. The deduced internal amino acid sequence of Bacillus sp. NTU-06 xylanase resembled the sequence of beta-1,4-endoxylanase, which is a member of glycoside hydrolase family 11. Some of the novel characteristics that make this enzyme potentially effective in xylan biodegradation are discussed.     

Purification and characterization of an exo-polygalacturonase produced by Penicillium viridicatum RFC3 in solid-state fermentation

The pectinolytic enzyme obtained from Penicillium viridicatum RFC by solid-state fermentation was purified to homogeneity by pretreatment with kaolin (40 mg mL⁻¹) and ultrafiltration, followed by chromatography on a Sephadex G50 column. The apparent molecular weight of the enzyme was 24 kDa. Maximal activity occurred at pH 6.0 and at 60 °C. The enzyme proved to be an exo-polygalacturonase, releasing galacturonic acid by hydrolysis of highly esterified pectin. The presence of 10 mM Ba²⁺ increased the enzyme activity by 96% and its thermal stability by 30%, besides increasing its stability at acid pH. The apparent K_m with apple pectin as substrate was 1.82 mg mL⁻¹ and the V_max was 81 μmol min⁻¹ mg⁻¹.     

Development of Bed Reactor Using Brick Dust Immobilized CIVI-Cellulase from Seeds of Cowpea (Vigna sinensis L)

Cellulase extracted from seeds of Cowpea (Vigna sinensis L var VITA-4) was partially purified and immobilized on brick dust as solid support via glutaraldehyde. The percentage retention of the enzyme activity on brick dust was nearly 85%. After immobilization specific activity of the enzyme increased from 0.275 to 0.557 U mg^?1 protein with about 2 fold enrichment. The optimum pH and temperature of soluble enzyme were determined as pH 4.6 and WC, respectively whereas immobilized enzyme showed at pH 5.0 and 37°C, respectively. The V_max values for soluble and immobilized enzyme were determined as 6.67 and 1.25 mg min^?1, respectively whereas K_m values were 4.35 and 4.76 mg ml^?1, respectively. The immobilized enzyme displayed higher thermal stability than soluble enzyme and retained about 50% of its initial activity after 12 reuses. Immobilized enzyme was packed in an indigenously designed double walled glass bed reactor for continuous production of reducing sugars.     

Cellulolytic enzyme production from agricultural residues for biofuel purpose on circular economy approach

This study evaluated the production of cellulolytic enzymes from different agricultural residues. The crude enzyme extract produced was characterized and applied for saccharification of some agricultural residues. Maximum cellulolytic activities were obtained using soybean hulls. All enzymatic activities were highly stable at 40 °C at a pH range of 4.5–5.5. For stability at low temperatures, the enzyme extract was stored at freezing temperature and cooling for about 290 days without major loss of activity. The K_m values found for total cellulase (FPase), endoglucanase (CMCase), and xylanase were 19.73 mg ml⁻¹, 0.65 mg ml⁻¹, and 22.64 mg ml⁻¹, respectively, and V_max values were 0.82 mol min⁻¹ mg⁻¹, 0.62 mol min⁻¹ mg⁻¹, and 104.17 mol min⁻¹ mg⁻¹ to cellulose, carboxymethyl cellulose, and xylan, respectively. In the saccharification tests, the total amount of total reducing sugars (TRS) released from 1 g of soybean hulls catalyzed by the enzymes present in the crude enzyme extract was 0.16 g g⁻¹ dry substrate.

     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Immobilized glucose oxidase on different supports for biotransformation removal of glucose from oligosaccharide mixtures

Four immobilized forms of glucose oxidase (GOD) were used for biotransformation removal of glucose from its mixture with dextran oligosaccharides. GOD was biospecifically bound to Concanavalin A-bead cellulose (GOD-ConA-TBC) and covalently to triazine-bead cellulose (GOD-TBC). Eupergit C and Eupergit CM were used for preparation of other two forms of immobilized GOD: GOD-EupC and GOD-EupCM. GOD-ConA-TBC and GOD-EupC exhibited the best operational and storage stabilities. pH and temperature optima of these two immobilized enzyme forms were broadened and shifted to higher values (pH 7 and 35 °C) in comparison with those of free GOD. The decrease of V_max values after immobilization was observed, from 256.8 ± 7.0 μmol min⁻¹ mg_GOD⁻¹ for free enzyme to 63.8 ± 4.2 μmol min⁻¹ mg_GOD⁻¹ for GOD-ConA-TBC and 45 ± 2.7 μmol min⁻¹ mg_GOD⁻¹ for GOD-EupC, respectively. Depending on the immobilization mode, the immobilized GODs were able to decrease the glucose content in solution to 3.8–15.6% of its initial amount The best glucose conversion, was achieved by an action of GOD-EupCM on a mixture of 100 g dextran with 9 g of glucose (i.e. 98.7% removal of glucose).     

Polyvinyl alcohol–silica nanohybrids: An efficient carrier matrix for amylase immobilization

Polyvinyl alcohol (PVA)–silica nanohybrids have been synthesized in a modified Stöber process. The bioactivities of the enzyme loaded hybrids were monitored and the optimum activity sample (H) was calcined at 300 °C in N₂ to obtain hybrid gel (H₃) with improved performance. The synthesized hybrids have been characterized by Fourier Transform Infra Red spectroscopy, X-ray diffraction, scanning electron microscopy, thermogravimetric analysis and BET surface area analysis. Under the optimized conditions, the bioactivity of the enzyme impregnated H₃ (H₃-Enz) was 21.823 U/mg. On recycling, H₃-Enz retained 88% of its initial bioactivity in the sixth cycle. The kinetic parameters of soluble starch hydrolysis for the immobilized (K_M = 4.137 mg mL^?1; V_max = 5.95 mg mL^?1 min^?1) and free enzyme (K_M = 10.667 mg mL^?1; V_max = 6.0557 mg mL^?1 min^?1) indicated that the immobilization has nearly doubled the enzyme's affinity for the substrate, while the maximum rate of the enzymatic reaction at the saturation point was not much affected. The immobilized enzyme showed greater shelf life in comparison to the free enzyme.     

Forming nanoparticles of α-amylase and embedding them into solid surfaces

In the current work nanoparticles (NPs) of α-amylase were generated in an aqueous solution using high-intensity ultrasound, and were subsequently immobilized on polyethylene (PE) films, or polycarbonate (PC) plates, or on microscope glass slides. The α-amylase NPs coated on the solid surfaces have been characterized by ESEM, TEM, FTIR, XPS and AFM. The substrates immobilized with α-amylase were used for hydrolyzing soluble potato starch to maltose. The amount of enzyme introduced in the substrates, leaching properties, and the catalytic activity of the immobilized enzyme were compared. The catalytic activity of the amylase deposited on the three solid surfaces was compared to that of the same amount of free enzyme at different pHs and temperatures. α-Amylase coated on PE showed the best catalytic activity in all the examined parameters when compared to native amylase, especially at high temperatures. When immobilized on glass, α-amylase showed better activity than the native enzyme over all pH and temperature values studied. However, the immobilization on PC did not improve the enzyme activity at any pH and any temperature compared to the free amylase. The kinetic parameters, K_m and V_max were also calculated. The amylase coated PE showed the most favorable kinetic parameters (K_m = 5 g L⁻¹ and V_max = 5E−07 mol mL⁻¹ min⁻¹). In contrast, the anchored enzyme-PC exhibited unfavorable kinetic parameters (K_m = 16 g L⁻¹, V_max = 4.2E−07 mol mL⁻¹ min⁻¹). The corresponding values for amylase-glass were K_m = 7 g L⁻¹, V_max = 1.8E−07 mol mL⁻¹ min⁻¹, relative to those obtained for the free enzyme (K_m = 6.6 g L⁻¹, V_max = 3.3E−07 mol mL⁻¹ min⁻¹).     

A novel immobilization method for nuclease P1 on macroporous absorbent resin with glutaraldehyde cross-linking and determination of its properties

Microbial nuclease P₁ from Penicllium citrinum was immobilized on macroporous absorbent resins: strong polar poly (styrene-co-DVB) resin (SPPSD), polymethacrylic ester resin and poly (styrene-co-DVB)-Br resin. The results showed that SPPSD was the best carrier. Three methods of glutaraldehyde cross-linking were used and simultaneous immobilization and cross-linking (CIS) was demonstrated to be the best method. The functional properties of immobilized nuclease P₁ were studied and compared to those of the free enzyme. The highest enzyme activities of free and immobilized nuclease P₁ were obtained in 0.2 M acetate buffer at pH 4.5 and a temperature of 70 °C. An increase in K_m (from 3.165 to 18.125 mg mL^?1) and a decrease in V_max (from 1667.18 to 443.95 U min^?1 mL^?1) were recorded after immobilization. SPPSD-glutaraldehyde-nuclease P₁ exhibited better thermal stability than the free enzyme. The apparent activation energy (E_a) of the free and immobilized nuclease P₁ was 137.04 kJ mol^?1 and 98.43 kJ mol^?1, respectively, implying that the catalytic efficiency of the immobilized enzyme was restricted by mass-transfer rather than kinetic limit.     

Purification, immobilization and characterization of linoleic acid isomerase on modified palygorskite

Linoleic acid isomerase from Lactobacillus delbrueckii subsp. bulgaricus 1.1480 was purified by DEAE ion-exchange chromatography and gel filtration chromatography. An overall 5.1% yield and purification of 93-fold were obtained. The molecular weight of the purified protein was ~41 kDa which was analyzed by SDS-PAGE. The purified enzyme was immobilized on palygorskite modified with 3-aminopropyltriethoxysilane. The immobilized enzyme showed an activity of 82 U/g. The optimal temperature and pH for the activity of the free enzyme were 30 °C and pH 6.5, respectively; whereas those for the immobilized enzyme were 35 °C and pH 7.0, respectively. The immobilized enzyme was more stable than the free enzyme at 30–60 °C, and the operational stability result showed that more than 85% of its initial activity was retained after incubation for 3 h. The K _m and V _max values of the immobilized enzyme were found to be 0.0619 mmol l⁻¹ and 0.147 mmol h⁻¹ mg⁻¹, respectively. The immobilized enzyme had high operational stability and retained high enzymatic activity after seven cycles of reuse at 37 °C.     

Immobilization of apricot pectinesterase (Prunus armeniaca L.) on porous glass beads and its characterization

Pectinesterase isolated from Malatya apricot pulp was covalently immobilized onto glutaraldehyde-containing amino group functionalized porous glass beads surface by chemical immobilization at pH 8.0. The amount of covalently bound apricot PE was found 1.721 mg/g glass support. The properties of immobilized enzyme were investigated and compared to those of free enzyme. The effect of various parameters such as pH, temperature, activation energy, heat and storage stability on immobilized enzyme were investigated. Optimum pH and temperature were determined to be 8.0 and 50 °C, respectively. The immobilized PE exhibited better thermostability than the free one. Kinetic parameters of the immobilized enzyme (K_m and V_max values) were also evaluated. The K_m was 0.71 mM and the V_max was 0.64 μmol min^?1 mg^?1. No drastic change was observed in the K_m and V_max values. The patterns of heat stability indicated that the immobilization process tends to stabilize the enzyme. Thermal and storage stability experiments were also carried out. It was observed that the immobilized enzyme had longer storage stability and retained 50% of its initial activity during 30 days.     

Optimized endodextranase-epoxy CIM® disk reactor for the continuous production of molecular weight-controlled prebiotic isomalto-oligosaccharides

An epoxy-activated monolithic Convective Interaction Media (CIM^®) disk was used for the immobilization of endodextranase D8144 from Penicillium sp. (EC 3.2.1.11) in order to produce on-line isomalto-oligosaccharides (IMOs) from Dextran T40. Enzymatic parameters, molecular weight of IMOs and performance of the IMmobilized Enzymes Reactor (IMER) were investigated. The immobilization yield of enzymes was about 45.3% (w/w), and the real specific activity close to 3.26 U mg⁻¹. The K_m values did not significantly change between free (12.8 g L⁻¹) and immobilized enzymes (14.2 g L⁻¹), due to the absence of diffusional limitation. The IMER system presented more than 80% of its residual activity after 5000 column volumes, highlighting the high stability of the immobilized endodextranases. Response surface methodology was used to enhance the performance of the IMER. Depending on dextran concentrations and flow rates, specific patterns of IMOs distributions were observed during the enzymatic hydrolysis. Finally, prebiotic activity was also investigated on IMOs produced by medium conditions (flow rate 0.3 mL min⁻¹ and dextran concentrations 4% w/w) against Lactobacillus rhamnosus GG (ATCC 53103). Their scores were at least as good as two commercialized fructo-oligosaccharides (FOS), Fibrulose^® F97 and Orafti^® P95.     

Reaction mechanism of phosphoribulokinase from a cyanobacterium,Synechococcus PCC7942

The dependence of the activity of phosphoribulokinase isolated from a cyanobacterium, Synechococcus PCC7942, on Mg²⁺ showed that its real substrates were Mg-ATP and free D-ribulose 5-phosphate. On the basis of results of kinetic inhibition studies and previously reported result of affinity chromatography, an ordered bi bi mechanism in which Mg-ATP binds before ribulose 5-phosphate is proposed. The K_m values for ATP and D-ribulose 5-phosphate were 0.09 and 0.27 mM, respectively. K_i values of ADP and D-ribulose 1,5-bisphosphate were 0.32 and 10.0 mM, respectively. Inhibition constants K_i1 and K_i2 for 6-phosphogluconate were 9.3 and 0.49 mM. K_ia was 0.13 mM. New kinetics on PRK gave higher control coefficient than the kinetics on Spinach PRK did in the model with PRK activity from 175 to 1000 µmol min^–1 mg^–1 chl.     

Characterization of recombinant L-ribose isomerase acquired from Cryobacterium sp. N21 with potential application in L-ribulose production

l-Ribose isomerase (lRI) is an enzyme that can catalyze the reversible isomerization between l-ribose and l-ribulose. It can also perform the conversion between many aldoses into their corresponding ketoses. l-RI was produced from Cryobacterium sp. N21 (CrL-RIse), and l-ribose was utilized as a substrate. The recombinant l-RI gene was cloned and overexpressed from Cryobacterium sp. N21. The purification of CrL-RIse was performed by metal-affinity chromatography. The enzyme displayed a corresponding band with an approximate size of 35 kDa on the SDS-PAGE analysis. The protein for this gene contains 266 amino acids with an expected molecular weight (M_w) of 29.6 kDa. The measured M_w of CrL-RIse calculated by HPLC was 125 kDa. CrL-RIse was extremely active in glycine buffer at 35 °C, pH 9.0, showing a specific activity of 54.96 U mg⁻¹. CrL-RIse displayed no major increase in activity with metal ions, excluding Mn²⁺. The estimated Km, K_cat, K_cat/Km and V_max values of CrL-RIse were 37.8 mM, 10,416 min⁻¹, 275.43 min⁻¹ mM⁻¹, and 250 U mg⁻¹, respectively. The rate of l-ribulose production was 31 % (6.24, 12.11, and 20.89 g L⁻¹) at equilibrium by utilizing 20, 40, and 70 g L⁻¹ of the substrate, respectively. The results indicated that CrL-RIse has the capability to manufacture l-ribulose from l-ribose.     

Immobilization of yeast alcohol dehydrogenase on magnetic nanoparticles for improving its stability

Yeast alcohol dehydrogenase (YADH) was immobilized covalently on Fe₃O₄ magnetic nanoparticles (10.6 nm) via carbodiimide activation. The immobilization process did not affect the size and structure of magnetic nanoparticles. The YADH-immobilized magnetic nanoparticles were superparamagnetic with a saturation magnetization of 61 emu g^–1, only slightly lower than that of the naked ones (63 emu g^–1). Compared to the free enzyme, the immobilized YADH retained 62% activity and showed a 10-fold increased stability and a 2.7-fold increased activity at pH 5. For the reduction of 2-butanone by immobilized YADH, the activation energies within 25–45 °C, the maximum specific activity, and the Michaelis constants for NADH and 2-butanone were 27 J mol^–1, 0.23 mol min^–1 mg^–1, 0.62 mM, and 0.43 M, respectively. These results indicated a structural change of YADH with a decrease in affinity for NADH and 2-butanone after immobilization compared to the free enzyme.     

Synthesis of urease hybrid nanoflowers and their enhanced catalytic properties

Increasing numbers of materials have been extensively used as platforms for enzyme immobilization to enhance catalytic activity and stability. Although stability of enzyme was accomplished with immobilization approaches, activity of the most of the enzymes was declined after immobilization. Herein, we synthesize the flower shaped-hybrid nanomaterials called hybrid nanoflower (HNF) consisting of urease enzyme and copper ions (Cu²⁺) and report a mechanistic elucidation of enhancement in both activity and stability of the HNF. We demonstrated how experimental factors influence morphology of the HNF. We proved that the HNF (synthesized from 0.02 mg mL⁻¹ urease in 10 mM PBS (pH 7.4) at +4 °C) exhibited the highest catalytic activity of ∼2000% and ∼4000% when stored at +4 °C and RT, respectively compared to free urease. The highest stability was also achieved by this HNF by maintaining 96.3% and 90.28% of its initial activity within storage of 30 days at +4 °C and RT, respectively. This dramatically enhanced activity is attributed to high surface area, nanoscale-entrapped urease and favorable urease conformation of the HNF. The exceptional catalytic activity and stability properties of HNF can be taken advantage of to use it in fields of biomedicine and chemistry.     

Laccase immobilization on mesostructured cellular foams affords preparations with ultra high activity

Extracellular laccase produced by the wood-rotting fungus Cerrena unicolor was immobilized covalently on the mesostructured siliceous cellular foams (MCFs) functionalised using various organosilanes with amine and glycidyl groups. The experiments indicated that laccase bound via glutaraldehyde to MCFs modified using 2-aminoethyl-3-aminopropyltrimethoxysilane remains very active. In the best biocatalyst activity was about 42,700 U mL^?1 carrier (66,800 U mg^?1 bound protein), and hence significantly higher than ever reported before. Optimisation of the immobilization procedure with respect to protein concentration, pH of coupling mixture and the enzyme purity afforded the biocatalyst with activity of about 90,980 U mL^?1. For the best preparation, thermal- and pH-stability, and activity profiles were determined. Experiments carried out in a batch reactor showed that k_cat/K_m for immobilized enzyme (0.88 min^?1 μM^?1) was acceptable lower than the value obtained for the native enzyme (2.19 min^?1 μM^?1). Finally, potentials of the catalysts were tested in the decolourisation of indigo carmine without redox-mediators. Seven consecutive runs with the catalysts separated by microfiltration proved that adsorption of the dye onto the carrier and enzymatic oxidation contribute to the efficient decolourisation without loss of immobilized enzyme activity.     

Decolorization of azo dye by immobilized Pseudomonas luteola entrapped in alginate–silicate sol–gel beads

Pseudomonas luteola was immobilized by entrapment in alginate–silicate sol–gel beads for decolorization of the azo dye, Reactive Red 22. The influences of biomass loading and operating conditions on specific decolorization rate and dye removal efficiency were studied in details. The immobilized cells were found to be less sensitive to changes in agitation rates (dissolved oxygen levels) and pH values. Michaelis–Menten kinetics could be used to describe the decolorization kinetics with the kinetic parameters being 36.5 mg g⁻¹ h⁻¹, 300.1 mg l⁻¹ and 18.2 mg g⁻¹ h⁻¹, 449.8 mg l⁻¹ for free and immobilized cells, respectively. After five repeated batch cycles, the decolorization rate of the free cells decreased by nearly 54%, while immobilized cells still retained 82% of their original activity. The immobilized cells exhibited better thermal stability during storage and reaction when compared with free cells. From SEM observation, a dense silicate gel layer was found to surround the macroporous alginate–silicate core, which resulted in much improved mechanical stability over that of alginate beads when tested under shaking conditions. Alginate–silicate matrices appeared to be the best matrix for immobilization of P. luteola in decolorization of Reactive Red 22 when compared with previous results using synthetic or natural polymer matrices.