Effects of 3' end deletions from the Vibrio harveyi luxB gene on luciferase subunit folding and enzyme assembly: generation of temperature-sensitive polypeptide folding mutants

Ten recombinant plasmids have been constructed by deletion of specific regions from the plasmid pTB7 that carries the luxA and luxB genes, encoding the alpha and beta subunits of luciferase from Vibrio harveyi, such that luciferases with normal alpha subunits and variant beta subunits were produced in Escherichia coli cells carrying the recombinant plasmids. The original plasmid, which conferred bioluminescence (upon addition of exogenous aldehyde substrate) on E. coli carrying it, was constructed by insertion of a 4.0-kb HindIII fragment of V. harveyi DNA into the HindIII site of plasmid pBR322 [Baldwin, T.O., Berends, T., Bunch, T. A., Holzman, T. F., Rausch, S. K., Shamansky, L., Treat, M. L., & Ziegler, M. M. (1984) Biochemistry 23, 3663-3667]. Deletion mutants in the 3' region of luxB were divided into three groups: (A) those with deletions in the 3' untranslated region that left the coding sequences intact, (B) those that left the 3' untranslated sequences intact but deleted short stretches of the 3' coding region of the beta subunit, and (C) those for which the 3' deletions extended from the untranslated region into the coding sequences. Analysis of the expression of luciferase from these variant plasmids has demonstrated two points concerning the synthesis of luciferase subunits and the assembly of those subunits into active luciferase in E. coli. First, deletion of DNA sequences 3' to the translational open reading frame of the beta subunit that contain a potential stem and loop structure resulted in dramatic reduction in the level of accumulation of active luciferase in cells carrying the variant plasmids, even though the luxAB coding regions remained intact.     

Nucleotide sequence of the luxA gene of Vibrio harveyi and the complete amino acid sequence of the alpha subunit of bacterial luciferase

The nucleotide sequence of the 1.85-kilobase EcoRI fragment from Vibrio harveyi that was cloned using a mixed-sequence synthetic oligonucleotide probe (Cohn, D. H., Ogden, R. C., Abelson, J. N., Baldwin, T. O., Nealson, K. H., Simon, M. I., and Mileham, A. J. (1983) Proc. Natl. Acad. Sci. U.S.A. 80, 120-123) has been determined. The alpha subunit-coding region (luxA) was found to begin at base number 707 and end at base number 1771. The alpha subunit has a calculated molecular weight of 40,108 and comprises a total of 355 amino acid residues. There are 34 base pairs separating the start of the alpha subunit structural gene and a 669-base open reading frame extending from the proximal EcoRI site. At the 3' end of the luxA coding region there are 26 bases between the end of the structural gene and the start of the luxB structural gene. Approximately two-thirds of the alpha subunit was sequenced by protein chemical techniques. The amino acid sequence implied by the DNA sequence, with few exceptions, confirmed the chemically determined sequence. Regions of the alpha subunit thought to comprise the active center were found to reside in two discrete and relatively basic regions, one from around residues 100-115 and the second from around residues 280-295.     

Polycistronic mRNAs code for polypeptides of the Vibrio harveyi luminescence system.

DNA coding for the alpha and beta subunits of Vibrio harveyi luciferase, the luxA and luxB genes, and the adjoining chromosomal regions on both sides of these genes (total of 18 kilobase pairs) was cloned into Escherichia coli. Using labeled DNA coding for the alpha subunit as a hybridization probe, we identified a set of polycistronic mRNAs (2.6, 4, 7, and 8 kilobases) by Northern blotting; the most prominent of these was the one 4 kilobases long. This set of mRNAs was induced during the development of bioluminescence in V. harveyi. Furthermore, the same set of mRNAs was synthesized in E. coli by a recombinant plasmid that contained a 12-kilobase pair length of V. harveyi DNA and expressed the genes for the luciferase subunits. A cloned DNA segment corresponding to the major 4-kilobase mRNA coded for the alpha and beta subunits of luciferase, as well as a 32,000-dalton protein upstream from these genes that could be specifically modified by acyl-coenzyme A and is a component of the bioluminescence system. V. harveyi mRNA that was hybridized to and released from cloned DNA encompassing the luxA and luxB genes was translated in vitro. Luciferase alpha and beta subunits and the 32,000-dalton polypeptide were detected among the products, along with 42,000- and 55,000-dalton polypeptides, which are encoded downstream from the lux genes and are thought to be involved in luminescence.     

The nucleotide sequence of the luxA and luxB genes of Xenorhabdus luminescens HM and a comparison of the amino acid sequences of luciferases from four species of bioluminescent bacteria

The luxA and luxB genes of bioluminescent bacteria encode the alpha and beta subunits of luciferase, respectively. Sequences of the luxA and luxB genes of Xenorhabdus luminescens, the only terrestrial bioluminescent bacterium known, were determined and the amino acid sequence of luciferase deduced. The alpha subunit was found to contain 360 amino acids and has a calculated molecular weight of 41,005 Da, while the beta subunit contains 327 amino acids and has a calculated molecular weight of 37,684 Da. Alignment of this luciferase with the luciferases of three marine bacteria showed 196 (or 55%) conserved residues in the alpha subunit and 114 (or 35%) conserved residues in the beta subunit. The highest degree of homology between any two species was between the luciferases of X. luminescens and Vibrio harveyi with 84% identity in the alpha subunits and 59% identity in the beta subunits.     

Nucleotide sequence, expression, and properties of luciferase coded by lux genes from a terrestrial bacterium

The lux genes required for expression of luminescence have been cloned from a terrestrial bacterium, Xenorhabdus luminescens, and the nucleotide sequences of the luxA and luxB genes coding for the alpha and beta subunits of luciferase determined. The lux gene organization was closely related to that of marine bacteria from the Vibrio genus with the luxD gene being located immediately upstream and the luxE downstream of the luciferase genes, luxAB. A high degree of homology (85% identity) was found between the amino acid sequences of the alpha subunits of X. luminescens luciferase and the luciferase from a marine bacterium, Vibrio harveyi, whereas the beta subunits of the two luciferases had only 60% identity in amino acid sequence. The similarity in the sequences of the alpha subunits of the two luciferases was also reflected in the substrate specificities and turnover rates with different fatty aldehydes supporting the proposal that the alpha subunit almost exclusively controls these properties. The luciferase from X. luminescens was shown to have a remarkably high thermal stability being stable at 45 degrees C (t 1/2 greater than 3 h) whereas V. harveyi luciferase was rapidly inactivated at this temperature (t 1/2 = 5 min). These results indicate that the X. luminescens lux system may be the bacterial bioluminescent system of choice for application in coupled luminescent assays and expression of lux genes in eukaryotic systems at higher temperatures.     

Cloning and expression of the lux-operon of Photorhabdus luminescens, strain Zm1: nucleotide sequence of luxAB genes and basic properties of luciferase

A chromosomal fragment of bacteria Photorhabdus luminescence Zm1, which contains the lux operon, was cloned into the vector pUC18. The hybrid clone containing plasmid pXen7 with the EcoRI fragment approximately 7-kb was shown to manifest a high level of bioluminescence. By subcloning and restriction analysis of the EcoRI fragment, the location of luxCDABE genes relative to restriction sites was determined. The nucleotide sequence of the DNA fragment containing the luxA and luxB genes encoding alpha- and beta-subunits of luciferase was determined. A comparison with the nucleotide sequences of luxAB genes in Hm and Hw strains of Ph. luminescence revealed 94.5 and 89.7% homology, respectively. The enterobacterial repetitive intergenic sequence (ERIC) of 126 bp typical for Hw strains was identified in the spacer between the luxD and luxA genes. The lux operon of Zm1 is assumed to emerge through recombination between Hm and Hw strains. Luciferase of Ph. luminescence was shown to possess a high thermal stability: its activity decreased by a factor of 10 at 44 degrees C for 30 min, whereas luciferases of marine bacteria Vibrio fischeri and Vibrio harveyi were inactivated by one order of magnitude at 44 degrees C for 1 and 6 min, respectively. The lux genes of Ph. luminescence are suggested for use in gene engineering and biotechnology.     

Polypeptide folding and dimerization in bacterial luciferase occur by a concerted mechanism in vivo

Bacterial luciferase is a heterodimeric enzyme comprising two nonidentical but homologous subunits, alpha and beta, encoded by adjacent genes, luxA and luxB. The two genes from Vibrio harveyi were separated and expressed from separate plasmids in Escherichia coli. If both plasmids were present within the same E. coli cell, the level of accumulation of active dimeric luciferase was not dramatically less than within cells containing the intact luxAB sequences. Cells carrying the individual plasmids accumulated large amounts of individual subunits, as evidenced by two-dimensional polyacrylamide gel electrophoresis. Mixing of a lysate of cells carrying the luxA gene with a lysate of cells carrying the luxB gene resulted in formation of very low levels of active heterodimeric luciferase. However, denaturation of the mixed lysates with urea followed by renaturation resulted in formation of large amounts of active luciferase. These observations demonstrate that the two subunits, alpha and beta, if allowed to fold independently in vivo, fold into structures that do not interact to form active heterodimeric luciferase. The encounter complex formed between the two subunits must be an intermediate structure on the pathway to formation of active heterodimeric luciferase.     

Isolation of the lux genes from Photobacterium leiognathi and expression in Escherichia coli

Genes necessary for luminescence (lux genes) in the marine bacterium Photobacterium leiognathi, strain PL721, were isolated and expressed in Escherichia coli. A 15-kb fragment obtained from a partial digestion of PL721 DNA with HindIII was cloned into the plasmid pACYC184, resulting in the hybrid plasmid pSD721. When pSD721 was transformed into E. coli ED8654, the resulting transformants were luminous with no additions to the cells, indicating that it contained the structural genes coding for the alpha and beta subunits of luciferase (luxA and luxB), and for components involved in aldehyde biosynthesis. Hybridization analysis with luxA and luxB 32P probes confirmed the location of these two genes on the 15-kb insert. When pSD721 was transformed into four different strains of E. coli, luminescence expression varied widely in amount and in pattern. In some strains, luminescence developed like an autoinducible system, and at maximum induction was very bright, even with no addition of aldehyde, while in others, luminescence was 100-fold less, and no induction was seen. In no case was luminescence affected by shifts in temperature, osmolarity, or iron concentration. These results indicate that, while the complete lux regulon is apparently contained on the 15-kb cloned fragment, the regulation of the lux regulon in pSD721 is subject to host controls by E. coli, controls which vary widely among different E. coli strains.     

Transposition of yeast mating type genes from two translocations of the left arm of chromosome III.

In the yeast Saccharomyces cerevisiae, the HIS4C gene lies on the left arm of chromosome III. We analyzed two chromosomal rearrangements that have HIS4C translocated either to chromosome XII or to a new translocation chromosome. Using the cmt mutation that allows expression of the normally silent copies of mating type genes, we found that both of these translocations also carried HML alpha, more than 30 map units distal to HIS4C which normally lies on chromosome III. In the case of the translocation chromosome (designated T3), we also found an exchange event between HML alpha on the translocation chromosome and HMLa on chromosome III. In diploids containing two T3 chromosomes (one carrying HML alpha and the carrying HMLa), we found that HML was 32 centimorgans from HIS4C, which was 10 centimorgans from an unknown centromere. In homothallic strains carrying HMLa MATa HMRa on chromosome III, switching from MATa to MAT alpha could occur by using the HML alpha on the translocation as the sole donor of alpha information. Transposition from HML alpha on chromosome T3 was about 20 to 40% as efficient as transposition from intact chromosome III. In contrast, transposition from the HML alpha inserted into chromosome XII was reduced about 100-fold. This reduced efficiency did not appear to be caused by an alteration in the sequences immediately surrounding HML alpha in the translocation. The translocated HML alpha sequence was located in the same size (29-kilobase) SalI fragment as was found in chromosome III, and the same EcoRI, HindIII, and BglII restriction sites were also found. Furthermore, HML alpha was still under the control of the CMT gene, which maintains HML as a silent copy of mating type information. These results suggested that the position of the HML alpha sequence plays an important role in the efficiency of mating type switching.     

cDNA sequence of the human integrin beta 5 subunit

A novel integrin receptor involved in cell adhesion to the matrix protein vitronectin has recently been described from a human lung epithelial-derived cell line (Cheresh, D. A., Smith, J. W., Cooper, H. M., and Quaranta, V. (1989) Cell 57, 59-69). This receptor has an alpha subunit that appears identical to the alpha v of the vitronectin receptor alpha v beta 3 expressed in melanoma and endothelial cells, but is complexed with a distinct beta subunit, beta 5. cDNA clones coding for beta 5 have been isolated and used to determine the mRNA and amino acid sequence of this new subunit. A 3.3-kilobase mRNA was found to code for a mature protein of 775 amino acid residues with a hydrophobic leader sequence of 24 amino acids. A 56% identity was found between the beta 5 and beta 3 protein sequences, making them the most closely related of the integrin beta subunits. Polymerase chain reaction abundance analysis revealed that alpha v and beta 5 mRNAs were found in seven very different cell lines, compared with beta 3 mRNA which was found in only three of the them, indicating that this new integrin receptor may be widely distributed.     

Molecular cloning of the penicillin G acylase gene from Arthrobacter viscosus

Penicillin G acylase was purified from the cultured filtrate of Arthrobacter viscosus 8895GU and was found to consist of two distinct subunits with apparent molecular weights of 24,000 (alpha) and 60,000 (beta). The partial N-terminal amino acid sequences of the alpha and beta subunits were determined with a protein gas phase sequencer, and a 29-base oligonucleotide corresponding to the partial amino acid sequence of the alpha subunit was synthesized. An Escherichia coli transformant having the penicillin G acylase gene was isolated from an A. viscosus gene library by hybridization with the 29-base probe. The resulting positive clone was further screened by the Serratia marcescens overlay technique. E. coli carrying a plasmid designated pHYM-1 was found to produce penicillin G acylase in the cells. This plasmid had an 8.0-kilobase pair DNA fragment inserted in the EcoRI site of pACYC184.     

Molecular cloning of the penicillin G acylase gene from Arthrobacter viscosus.

Penicillin G acylase was purified from the cultured filtrate of Arthrobacter viscosus 8895GU and was found to consist of two distinct subunits with apparent molecular weights of 24,000 (alpha) and 60,000 (beta). The partial N-terminal amino acid sequences of the alpha and beta subunits were determined with a protein gas phase sequencer, and a 29-base oligonucleotide corresponding to the partial amino acid sequence of the alpha subunit was synthesized. An Escherichia coli transformant having the penicillin G acylase gene was isolated from an A. viscosus gene library by hybridization with the 29-base probe. The resulting positive clone was further screened by the Serratia marcescens overlay technique. E. coli carrying a plasmid designated pHYM-1 was found to produce penicillin G acylase in the cells. This plasmid had an 8.0-kilobase pair DNA fragment inserted in the EcoRI site of pACYC184.     

Cloning, sequence, and expression of the Drosophila cAMP-dependent protein kinase catalytic subunit gene

Genomic DNA containing the protein coding region for Drosophila cAMP-dependent protein kinase catalytic subunit has been cloned and sequenced. The probe used to detect and isolate the gene fragment was constructed from two partially complementary synthetic oligonucleotides and contains 60 base pairs that encode (using Drosophila codon preferences) amino acids 195-214 of the beef heart catalytic subunit. In reduced stringency hybridization conditions, the probe recognizes two target sites in fly genomic DNA with 85% homology. One of these sites is in the cAMP-dependent protein kinase catalytic subunit gene, which was isolated as a 3959-base pair HindIII fragment. This fragment contains all of the protein coding portion, 900 base pairs upstream of the initiator ATG, and 2000 base pairs downstream of the termination codon (TAG). The coding portion of the gene contains no introns and yields a protein of 352 amino acids. There is a 2-amino acid insertion near the N terminus of the fly protein relative to the beef and mouse enzymes. Of the remaining 350 amino acids, 273 are invariant in the three species. A probe derived from the coding sequence of the HindIII clone hybridizes strongly to a 5100-base poly(A)+ RNA and weakly to 4100- and 3400-base poly(A)+ RNAs expressed in adult flies. A 2100-base pair EcoRI genomic fragment containing the second site recognized by the 60-base pair probe has also been cloned. DNA sequence analysis demonstrates that this fragment is part of the cGMP-dependent protein kinase gene or a close homolog. The catalytic subunit gene and the cGMP-dependent protein kinase gene have been located in regions 30C and 21D, respectively, of chromosome 2.     

Random and site-directed mutagenesis of bacterial luciferase: investigation of the aldehyde binding site

Numerous luciferase structural gene mutants of Vibrio harveyi have been generated by random mutagenesis and phenotypically characterized [Cline, T.W., & Hastings, J.W. (1972) Biochemistry 11, 3359-3370]. All mutants selected by Cline and Hastings for altered kinetics in the bioluminescence reaction had lesions in the alpha subunit. One of these mutants, AK-20, has normal or slightly enhanced thermal stability and enhanced FMNH2 binding affinity but a much-reduced quantum yield of bioluminescence and dramatically altered stability of the aldehyde-C4a-peroxydihydroflavin-luciferase intermediate (IIA), with a different aldehyde chain length dependence from that of the wild-type luciferase. To better understand the structural aspects of the aldehyde binding site in bacterial luciferase, we have cloned the luxAB genes from the V. harveyi mutant AK-20, determined the nucleotide sequence of the entire luxA gene, and determined the mutation to be TCT----TTT, resulting in a change of serine----phenylalanine at position 227 of the alpha subunit. To confirm that this alteration caused the altered kinetic properties of AK-20, we reverted the AK-20 luxA gene by oligonucleotide-directed site-specific mutagenesis to the wild-type sequence and found that the resulting enzyme is indistinguishable from the wild-type luciferase with respect to quantum yield, FMNH2 binding affinity, and intermediate IIA decay rates with 1-octanal, 1-decanal, and 1-dodecanal. To investigate the cause of the AK-20 phenotype, i.e., whether the phenotype is due to loss of the seryl residue or to the properties of the phenylalanyl residue, we have constructed mutants with alanine, tyrosine, and tryptophan at alpha 227.(ABSTRACT TRUNCATED AT 250 WORDS)     

Evidence for a second isoform of the catalytic subunit of cAMP-dependent protein kinase

We have used a previously characterized mouse cDNA clone for the catalytic (C) subunit of cAMP-dependent protein kinase (Uhler, M. D., Carmichael, D. F., Lee, D. C., Chrivia, J. C., Krebs, E. G., and McKnight, G. S. (1986) Proc. Natl. Acad. Sci. U. S. A. 83, 1300-1304), which we designate C alpha, to isolate cDNA clones coding for a second isoform of the C subunit, C beta. C alpha cDNA clones hybridize to a 2.4-kilobase mRNA on Northern blots whereas C beta cDNA clones detect a 4.3-kilobase mRNA. Nucleotide sequence comparison between C alpha and C beta cDNA clones shows that the C beta cDNA codes for a protein which shows 91% identity with C alpha. Determination of mRNA levels for C beta in various tissues shows that it is most highly expressed in brain although it is detectable in all tissues examined. The presence of two genes coding for the C subunit of cAMP-dependent protein kinase may explain past reports of heterogeneity in C subunit protein preparations.