Accounting for the Material Stock of Nations

National material stock (MS) accounts have been a neglected field of analysis in industrial ecology, possibly because of the difficulty in establishing such accounts. In this research, we propose a novel method to model national MS based on historical material flow data. This enables us to avoid the laborious data work involved with bottom‐up accounts for stocks and to arrive at plausible levels of stock accumulation for nations. We apply the method for the United States and Japan to establish a proof of concept for two very different cases of industrial development. Looking at a period of 75 years (1930–2005), we find that per capita MS has been much higher in the United States for the entire period, but that Japan has experienced much higher growth rates throughout, in line with Japan's late industrial development. By 2005, however, both Japan and the United States arrive at a very similar level of national MS of 310 to 375 tonnes per capita, respectively. This research provides new insight into the relationship between MS and flows in national economies and enables us to extend the debate about material efficiency from a narrow perspective of throughput to a broader perspective of stocks.     

Anthropogenic Carbon Stock Dynamics of Pulp and Paper Products in Germany

Carbon‐based materials (CBMs) for energetic and material purposes combine biogenic and anthropogenic carbon cycles. In the latter, numerous manufactured products with various in‐use lifespans accumulate as anthropogenic carbon stocks. Understanding the behavior of these stocks is an important requirement to estimate not only future waste amounts, source for secondary raw materials, but also the impacts and effects in carbon emissions and carbon management. Previous models have estimated material stock changes; however, a lack of research in carbon stocks is perceived. Moreover, studies follow in‐use lifespan estimation approaches, such as decay functions, which do not coincide with observed consumption and waste treatment patterns. In the first part of this article, we present a carbon stock‐flow model to analyze inter‐relationships between carbon flows and stocks from raw materials to waste treatment processes considering a consumer perspective, where the dynamics of anthropogenic carbon stocks are completely described. In the second part, we study the pulp and paper industry in Germany under a scenario approach to analyze the behavior, development, and impacts of paper stocks and flows between 2010 and 2040. The model provided coherent results, with industrial data estimating 33.9 million metric tons in 2010 in paper stocks, equivalent to 410 kilograms per person. Consumption per capita and in‐use lifespan of products were identified as the most significant variables in carbon stock building. Model simulations show a sustained growth in stocks for the next 30 years, with increase in waste and carbon emissions. But in combination with recycling and reuse mechanisms and consumption patterns, environmental impacts are reduced.     

Explanatory Variables for per Capita Stocks and Flows of Copper and Zinc

A number of potential explanatory variables for the stocks and flows of copper and zinc in contemporary technological societies are co-analyzed with the tools of exploratory data analysis. A one-year analysis (circa 1994) is performed for 50 countries that comprise essentially all anthropogenic stocks and flows of the two metals. The results show that (1) The key explanatory variable for metal use is gross domestic product (GDP) per capita (purchasing power parity, PPP). By itself, GDP explains between one-third and one-half of the variance of per capita copper and zinc use. Other variables that were significantly correlated with copper and zinc use included stock of passenger cars and television sets (per 1, 000 people); two infrastructure variables, wired telephone connections, urban population, and value added inmanufacturing. The results do not provide evidence supporting the Kuznets curve hypothesis for these metals. (2) Metal use per capita can be estimated using multiple regression equations. For copper, the natural logarithm of use is related to the explanatory variables GDP (PPP), value added in manufacturing, and urban population. This model explains 80% of the variance among the different countries (r²= 0.79). The natural logarithm of zinc use is related to GDP (PPP) and value added in manufacturing with an r² of 0.75; (3) For both metals, rates of metal fabrication, use, net addition to stock, and discard in low-and high-income countries differ significantly from each other. Our statistical analyses thus provide a basis for estimating the potential development of metal use, net addition to stock, and discard, using data on explanatory variables that are available at the international level.     

The Physical Economy of the United States of America

The United States is not only the world's largest economy, but it is also one of the world's largest consumers of natural resources. The country, which is inhabited by some 5% of the world's population, uses roughly one‐fifth of the global primary energy supply and 15% of all extracted materials. This article explores long‐term trends and patterns of material use in the United States. Based on a material flow account (MFA) that is fully consistent with current standards of economy‐wide MFAs and covers domestic extraction, imports, and exports of materials for a 135‐year period, we investigated the evolution of the U.S. industrial metabolism. This process was characterized by an 18‐fold increase in material consumption, a multiplication of material use per capita, and a shift from renewable biomass toward mineral and fossil resources. In spite of considerable improvements in material intensity, no dematerialization has happened so far; in contrast to other high‐income countries, material use has not stabilized since the 1970s, but has continued to grow. This article compares patterns and trends of material use in the United States with those in Japan and the United Kingdom and discusses the factors underlying the disproportionately high level of U.S. per capita resource consumption.     

Modeling copper demand in China up to 2050: A business‐as‐usual scenario based on dynamic stock and flow analysis

In this paper, we develop a dynamic stock model and scenario analysis involving a bottom‐up approach to analyze copper demand in China from 2005 to 2050 based on government and related sectoral policies. The results show that in the short‐term, China's copper industry cannot achieve a completely circular economy without additional measures. Aggregate and per capita copper demand are both set to increase substantially, especially in infrastructure, transportation, and buildings. Between 2016 and 2050, total copper demand will increase almost threefold. Copper use in buildings will stabilize before 2050, but the copper stock in infrastructure and transportation will not yet have reached saturation in 2050. The continuous growth of copper stock implies that secondary copper will be able to cover just over 50% of demand in 2050, at best, even with an assumed recycling rate of 90%. Finally, future copper demand depends largely on the lifetime of applications. There is therefore an urgent need to prolong the service life of end‐use products to reduce the amount of materials used, especially in large‐scale applications in buildings and infrastructure.     

Estimation of Copper In‐use Stocks in Nanjing,China

Copper (Cu) is an essential but supply‐restricted resource in China. Characterization of in‐use stocks can provide useful instruction for the future recycling of copper. This article attempts to estimate copper in‐use stocks in a Chinese city. To this purpose, an extensive bottom‐up estimate of copper stocks in use in Nanjing in the year 2009 was conducted. The results are a total stock estimate of 295 gigagrams (Gg) of copper or 46.9 kilograms (kg) of copper per capita for 2009. Infrastructure, equipment, and buildings contain 42.0%, 26.1%, and 28.1% of the total stock, respectively, indicating that these three categories are principal potential reservoirs of a secondary copper resource. The copper in transportation amounts to only about 3.7% of the total amount. The per capita stock was compared with similar studies carried out in other regions of the world, and the results show that the Nanjing level is significantly lower than developed countries. On the whole, our results show that electric power transmission and distribution systems, buildings, household durables, and industrial equipment are the four largest potential reservoirs of copper scrap.     

Tracking Construction Material over Space and Time: Prospective and Geo‐referenced Modeling of Building Stocks and Construction Material Flows

Construction material plays an increasingly important role in the environmental impacts of buildings. In order to investigate impacts of materials on a building level, we present a bottom‐up building stock model that uses three‐dimensional and geo‐referenced building data to determine volumetric information of material stocks in Swiss residential buildings. We used a probabilistic modeling approach to calculate future material flows for the individual buildings. We investigated six scenarios with different assumptions concerning per‐capita floor area, building stock turnover, and construction material. The Swiss building stock will undergo important structural changes by 2035. While this will lead to a reduced number in new constructions, material flows will increase. Total material inflow decreases by almost half while outflows double. In 2055, the total amount of material in‐ and outflows are almost equal, which represents an important opportunity to close construction material cycles. Total environmental impacts due to production and disposal of construction material remain relatively stable over time. The cumulated impact is slightly reduced for the wood‐based scenario. The scenario with more insulation material leads to slightly higher material‐related emissions. An increase in per‐capita floor area or material turnover will lead to a considerable increase in impacts. The new modeling approach overcomes the limitations of previous bottom‐up building models and allows for investigating building material flows and stocks in space and time. This supports the development of tailored strategies to reduce the material footprint and environmental impacts of buildings and settlements.     

Global Rare Earth In‐Use Stocks in NdFeB Permanent Magnets

The rare earth elements are indispensible in modern technology, especially in the applications of permanent magnets. Very little quantitative information is available on rare earth elements used in permanent magnets, however. This study looks back to 1983, when neodymium‐iron‐boron (NdFeB) permanent magnets were first manufactured, and reaches to 2007, when the market of permanent magnets was well developed. We draw on the historical data on permanent magnets from China, Japan, the United States, and Europe to provide the first estimates of global in‐use stocks for four rare earth elements—praseodymium (Pr), neodymium (Nd), terbium (Tb), and dysprosium (Dy)—in NdFeB permanent magnets. In‐use stocks amount to 62.6 gigagrams (Gg) Nd, 15.7 Gg Pr, 15.7 Gg Dy, and 3.1 Gg Tb; these stocks, if efficiently recycled, could provide a valuable supplement to geological stocks as they are almost four times the 2007 annual extraction rate of the individual elements.     

Maintenance and Expansion: Modeling Material Stocks and Flows for Residential Buildings and Transportation Networks in the EU25

Material stocks are an important part of the social metabolism. Owing to long service lifetimes of stocks, they not only shape resource flows during construction, but also during use, maintenance, and at the end of their useful lifetime. This makes them an important topic for sustainable development. In this work, a model of stocks and flows for nonmetallic minerals in residential buildings, roads, and railways in the EU25, from 2004 to 2009 is presented. The changing material composition of the stock is modeled using a typology of 72 residential buildings, four road and two railway types, throughout the EU25. This allows for estimating the amounts of materials in in‐use stocks of residential buildings and transportation networks, as well as input and output flows. We compare the magnitude of material demands for expansion versus those for maintenance of existing stock. Then, recycling potentials are quantitatively explored by comparing the magnitude of estimated input, waste, and recycling flows from 2004 to 2009 and in a business‐as‐usual scenario for 2020. Thereby, we assess the potential impacts of the European Waste Framework Directive, which strives for a significant increase in recycling. We find that in the EU25, consisting of highly industrialized countries, a large share of material inputs are directed at maintaining existing stocks. Proper management of existing transportation networks and residential buildings is therefore crucial for the future size of flows of nonmetallic minerals.     

Multilevel Anthropogenic Cycles of Copper and Zinc: A Comparative Statistical Analysis

Contemporary cycles for copper and zinc are coanalyzed with the tools of exploratory data analysis. One-year analyses (circa 1994) are performed at three discrete spatial levels-country (52 countries that comprise essentially all anthropogenic stocks and flows of the two metals), eight world regions, and the planet as a whole-and are completed both in absolute magnitude and in per capita terms. This work constitutes, to our knowledge, the first multiscale, multilevel analysis of anthropogenic resources throughout their life cycles. The results demonstrate that (1) A high degree of correlation exists between country-level copper and country-level zinc rates of fabrication and manufacturing, entry into use, net addition to in-use stocks, discard, and landfilling; (2) Regional-level rates for copper and zinc cycle parameters show the same correlations as exist at country level; (3) On a per capita basis, countries add to in-use stock almost 50% more copper than zinc; (4) The predominant discard streams for copper and zinc at the global level are different for the two metals, and relative rates of different loss processes differ geographically, so that resource recovery policies must be designed from metalspecific and location-specific perspectives; (5)When absolute magnitudes of life-cycle flows are considered, the standard deviations of the data sets decrease from country level to regional level for both copper and zinc, which is not the case for the per capita data sets, where the statistical properties of the data sets for both metals approach being independent of spatial level, thus providing a basis for predicting unmeasured per capita metal flow behavior.     

Global Patterns and Trends for Non‐Metallic Minerals used for Construction

Despite accounting for almost 50% of global material use, nonmetallic minerals—mostly used for construction of buildings and infrastructure—are the material flow analysis (MFA) category with the highest uncertainty. The main reason for this is incomplete reporting in official national statistics because of ease of availability and the low per‐unit cost of these materials. However, the environmental burden associated with nonmetallic minerals, which include energy use for extraction and transport, land‐use change, and disposal of large amounts of construction demolition waste, call for a thorough understanding of the magnitude of nonmetallic mineral flows. Previous estimates for nonmetallic minerals have used simplistic assumptions. This study aims to increase the precision of nonmetallic mineral accounts at national and global level using consumption of bitumen, bricks, cement, and railways in combination with technical coefficients from the engineering literature to infer the actual yearly consumption of nonmetallic minerals. We estimate the extraction of nonmetallic minerals and provide uncertainty estimates for the new accounts as well as information about consumption by different sectors. Analyzing the evolution of consumption for seven world regions, we find that, in North America and Europe, the consumption of nonmetallic minerals over the past 40 years has followed the growth patterns of population, whereas for all other regions consumption has been closely related to gross domestic product (GDP). A more accurate account of global and country‐by‐country extraction of nonmetallic minerals may provide insights into supply shortages and inform waste management strategies for construction and demolition waste.     

Particle Flow Analysis

Several authors have highlighted the potential risks of nanoparticles (NPs). Still, little is known about the magnitude of emissions of NPs from society. Here, the method of explorative particle flow analysis (PFA), a modification of the more well‐known substance flow analysis (SFA), is suggested. In explorative PFA, particle number instead of mass is used as flow and stock metric and explorative scenarios are used to account for potential technology diffusion and, consequently, potentially higher emissions. The method has been applied in a case study of the use phase of titanium dioxide (TiO₂) NPs in paint, sunscreen and self‐cleaning cement. The results indicate that the current largest emissions of TiO₂ NPs originate from the use of sunscreen. One scenario implies that, in the future, the largest flows and stocks of TiO₂ NPs could be related to self‐cleaning cement. Gaps in current knowledge are identified and suggestions for future research are given.     

Lead In-Use Stock

The 20th century was a time of rapidly escalating use of lead (Pb). As a consequence, the standing stock of lead is now substantial. By linking lead extraction and use to estimates of product lifetimes and recycling, we have derived an estimate of the standing stock of lead throughout the century by top-down techniques. We find that the stock of in-use lead is almost entirely made up of batteries (68%), lead sheet (10%), and lead pipe (10%). Globally, about 200 teragrams (Tg) Pb was mined in the 20th century, and about 25 Tg Pb now makes up the in-use stock, so some 87% has been lost over time. Nonetheless, about 11% of all lead entering use was added to in-use stock in 2000, so the stock continues to increase each year. Currently, most of the stock is in Europe (32%), North America (32%), and Asia (24%). On a per capita basis, the global stock is about 5.6 kilograms (kg) Pb, and regional in-use stock ranges from 2.0 kg Pb (Africa) to 19.7 kg Pb (Europe). From a sustainability perspective, we estimate that the global lead resource is around 415 Tg Pb. Were the entire world to receive the services of lead at the level of the developed countries, some 130 Tg Pb would be needed, so there do not appear to be significant long-term limitations to the lead supply.     

The Energetic Metabolism of the European Union and the United States: Decadal Energy Input Time-Series with an Emphasis on Biomass

This article presents an assessment of energy inputs of the European Union (the 15 countries before the 2004 enlargement, abbreviated EU‐15) for the period 1970–2001 and the United States for 1980–2000. The data are based on an energy flow analysis (EFA) that evaluates socioeconomic energy flows in a way that is conceptually consistent with current materials flow analysis (MFA) methods. EFA allows assessment of the total amount of energy required by a national economy; it yields measures of the size of economic systems in biophysical units. In contrast to conventional energy balances, which only include technically used energy, EFA also accounts for socioeconomic inputs of biomass; that is, it also considers food, feed, wood and other materials of biological origin. The energy flow accounts presented in this article do not include embodied energy. Energy flow analyses are relevant for comparisons across modes of subsistence (e.g., agrarian and industrial society) and also to detect interrelations between energy utilization and land use. In the EU‐15, domestic energy consumption (DEC = apparent consumption = domestic extraction plus import minus export) grew from 60 exajoules per year (1 EJ = 10¹⁸ J) in 1970 to 79 EJ/yr in 2001, thus exceeding its territory's net primary production (NPP, a measure of the energy throughput of ecosystems). In the United States, DEC increased from 102 EJ/yr in 1980 to 125 EJ/yr in 2000 and was thus slightly smaller than its NPP. Taken together, the EU‐15 and the United States accounted for about 38% of global technical energy use, 31% of humanity's energetic metabolism, but only 10% of global terrestrial NPP and 11% of world population in the early 1990s. Per capita DEC of the United States is more than twice that of the EU‐15. Calculated according to EFA methods, energy input in the EU and the United States was between one‐fifth and one‐third above the corresponding value reported in conventional energy balances. The article discusses implications of these results for sustainability, as well as future research needs.     

Evaluation of Modeling Approaches to Determine End‐of‐Life Flows Associated with Buildings: A Viennese Case Study on Wood and Contaminants

Dynamic material flow analysis enables the forecasting of secondary raw material potential for waste volumes in future periods, by assessing past, present, and future stocks and flows of materials in the anthroposphere. Analyses of waste streams of buildings stocks are uncertain with respect to data and model structure. Wood construction in Viennese buildings serve as a case study to compare different modeling approaches for determining end‐of‐life (EoL) wood and corresponding contaminant flows (lead, chlorine, and polycyclic aromatic hydrocarbons). A delayed input and a leaching stock modeling approach are used to determine wood stocks and flows from 1950 until 2100. Cross‐checking with independent estimates and sensitivity analyses are used to evaluate the results’ plausibility. In the situation of the given data in the present case study, the delay approach is a better choice for historical observations of EoL wood and for analyses at a substance level. It has some major drawbacks for future predictions at the goods level, though, as the durability of a large number of historical buildings with considerably higher wood content is not reflected in the model. The wood content parameter differs strongly for the building periods and has therefore the highest influence on the results. Based on this knowledge, general recommendations can be derived for analyses on waste flows of buildings at a goods and substance level.     

Material and Energy Flows and Environmental Impacts of the Internet in Switzerland

The Internet leads to material and energy consumption as well as various environmental impacts on both the regional and global scale. Yet, assessments of the Internet's energy consumption and resulting greenhouse gas emissions are still rare, and assessments of material flows and further environmental impacts are virtually non‐existent. This article investigates material flows, the direct energy consumption during the use phase, as well as environmental impacts linked to the service, “Internet in Switzerland.” In our model, the service, Internet in Switzerland, is divided into various Internet participant categories. All devices used to access or provide Internet services are merged in a limited number of equipment families and, as such, included in an inventory of the existing infrastructure (stock). Based on this inventory, a material flow analysis (MFA) is performed, which includes the current stock as well as flows resulting from growth and disposal. The direct energy consumption for the operation of the infrastructure is quantified. Environmental impacts are calculated with a life cycle assessment approach, using the ecoinvent database and the software, SimaPro, applying four different methods. The MFA results in a 2009 stock of 98,100 tonnes. Approximately 4,130 gigawatt hours per year, or 7% of the total Swiss electricity consumption, were used in 2009 to operate the Swiss infrastructure. The environmental impacts caused during the production and use phases vary significantly depending on the assessment method chosen. The disposal phase had mainly positive impacts as a result of material recovery.     

Assessment of Environmental Impacts of an Aging and Stagnating Water Supply Pipeline Network

Aging urban infrastructure is a common phenomenon in industrialized countries. The urban water supply pipeline network in the city of Oslo is an example. Even as it faces increasing operational, maintenance, and management challenges, it needs to better its environmental performance by reducing, for instance, the associated greenhouse gas emissions. In this article the authors examine the environmental life cycle performance of Oslo's water supply pipelines by analyzing annual resource consumption and emissions as well as life cycle assessment (LCA) impact potentials over a period of 16 years, taking into account the production/manufacture, installation, operation, maintenance, rehabilitation, and retirement of pipelines. It is seen that the water supply pipeline network of Oslo has already reached a state of saturation on a per capita basis, that is, it is not expanding any more relative to the population it serves, and the stock is now rapidly aging. This article is part of a total urban water cycle system analysis for Oslo, and analyzes more specifically the environmental impacts from the material flows in the water distribution network, examining six environmental impact categories using the SimaPro (version 7.1.8) software, Ecoinvent database, and the CML 2001 (version 2.04) methodology. The long‐term management of stocks calls for a strong focus on cost optimization, energy efficiency, and environmental friendliness. Global warming and abiotic depletion emerge as the major impact categories from the water pipeline system, and the largest contribution is from the production and installation phases and the medium‐size pipelines in the network.     

Greening China's Wastewater Treatment Infrastructure in the Face of Rapid Development: Analysis Based on Material Stock and Flow through 2050

Wastewater treatment infrastructure (WWTI) construction in China has entered an accelerated stage of development in recent years as a result of rapid economic growth, urbanization, and the demand for improving water quality. As a result, a large amount of resources and materials will be allocated for the WWTI, and it is particularly important to find ways to reduce resource consumption effectively so that social dematerialization and sustainable development can be achieved. In this study, we employed the dynamic material flow model to estimate the material flows and stocks of WWTIs and the associated carbon dioxide (CO₂) emissions through 2050, considering effects of a rise in water consumption, a longer lifetime, and an increased material recycling rate. Our results indicate that material consumption in WWTIs will increase rapidly through 2025 to meet the needs of the increased volume of discharged wastewater as well as to overcome the shortage of existing wastewater treatment plants. In contrast with the moderate effects of rise in water consumption, prolonging the lifetime will greatly reduce material consumption in WWTI construction during the period 2030–2050, and approximately 60% of the total material input will be saved in the medium‐lifetime scenario, compared with the short‐lifetime scenario. Material output and CO₂ emissions associated with WWTIs will be reduced by 87% and 37%, respectively, in the medium‐lifetime scenario, compared with the short‐lifetime scenario, under high‐water‐consumption growth. Our results highlight the great importance of pipeline construction and cement consumption in resource consumption associated with WWTI construction in China. Moreover, this study also examined the potential ways to reduce material consumption in WWTI construction in the context of the demand chain, the design, construction, operation and management, and demolition.     

Weight under Steel Wheels: Material Stock and Flow Analysis of High‐Speed Rail in China

The construction of a nation‐wide high‐speed rail (HSR) network has emerged as a hugely expensive and ambitious infrastructure project in China. As of December 2012, some 8,800 kilometers (km) of double‐track HSR lines came into service in the country, accounting for 40% of the total HSR length in the world. The network is expected to expand to 34,000 km or longer in around two decades. As the first HSR system specially built and operated in an economically developing country, it helps integrate the sprawling economy and lift the quality of life of the increasing urban population. China's experiences in HSR are expected to be of value to other countries aiming to adopt bullet train systems, especially those at a similar level of industrialization and urbanization. This work specifically examines material stocks and flows associated with the HSR infrastructure construction in China. A major distinction from the construction of HSR tracks in Europe is that nearly 70% of the HSR tracks in China are laid upon bridges or inside tunnels, which are structures that demand great amounts of raw materials. The entire network, once completed by 2030, will cumulatively require 83 to 137 million tonnes (Mt) of steel and 560 to 920 Mt of cement. This is still a small share of China's use of material resources. Nonetheless, the massive application of the steel‐ and cement‐intensive structures deserves consideration when assessing the environmental performance of HSR over its entire life cycle.