Perfusion seed cultures improve biopharmaceutical fed‐batch production capacity and product quality |
| |
| Authors: | William C Yang Jiuyi Lu Chris Kwiatkowski Hang Yuan Rashmi Kshirsagar Thomas Ryll Yao‐Ming Huang |
| |
| Affiliation: | 1. Cell Culture Development, Biogen Idec Inc., NC;2. Manufacturing Sciences, Biogen Idec Inc., Cambridge, MA;3. Cell Culture Development, Biogen Idec Inc., Cambridge, MA |
| |
| Abstract: | Volumetric productivity and product quality are two key performance indicators for any biopharmaceutical cell culture process. In this work, we showed proof‐of‐concept for improving both through the use of alternating tangential flow perfusion seed cultures coupled with high‐seed fed‐batch production cultures. First, we optimized the perfusion N‐1 stage, the seed train bioreactor stage immediately prior to the production bioreactor stage, to minimize the consumption of perfusion media for one CHO cell line and then successfully applied the optimized perfusion process to a different CHO cell line. Exponential growth was observed throughout the N‐1 duration, reaching >40 × 106 vc/mL at the end of the perfusion N‐1 stage. The cultures were subsequently split into high‐seed (10 × 106 vc/mL) fed‐batch production cultures. This strategy significantly shortened the culture duration. The high‐seed fed‐batch production processes for cell lines A and B reached 5 g/L titer in 12 days, while their respective low‐seed processes reached the same titer in 17 days. The shortened production culture duration potentially generates a 30% increase in manufacturing capacity while yielding comparable product quality. When perfusion N‐1 and high‐seed fed‐batch production were applied to cell line C, higher levels of the active protein were obtained, compared to the low‐seed process. This, combined with correspondingly lower levels of the inactive species, can enhance the overall process yield for the active species. Using three different CHO cell lines, we showed that perfusion seed cultures can optimize capacity utilization and improve process efficiency by increasing volumetric productivity while maintaining or improving product quality. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:616–625, 2014 |
| |
| Keywords: | CHO cell culture ATF perfusion fed‐batch capacity antibody fusion protein product quality |
|
|
